[PATCH] ipmi: Fix memleaking for add_smi when duplicating happen

[Yinghai Lu <yinghai@kernel.org>]

also print out the reg spacing and size for spmi and smbios.
so bios guys could have idea to make them consistent.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>

---
 drivers/char/ipmi/ipmi_si_intf.c |   47 ++++++++++++++++++++++++++++++++-------
 1 file changed, 39 insertions(+), 8 deletions(-)

Index: linux-2.6/drivers/char/ipmi/ipmi_si_intf.c
===================================================================
--- linux-2.6.orig/drivers/char/ipmi/ipmi_si_intf.c
+++ linux-2.6/drivers/char/ipmi/ipmi_si_intf.c
@@ -1804,9 +1804,12 @@ static int hotmod_handler(const char *va
 				info->irq_setup = std_irq_setup;
 			info->slave_addr = ipmb;
 
-			if (!add_smi(info))
+			if (!add_smi(info)) {
 				if (try_smi_init(info))
 					cleanup_one_si(info);
+			} else {
+				kfree(info);
+			}
 		} else {
 			/* remove */
 			struct smi_info *e, *tmp_e;
@@ -1890,9 +1893,12 @@ static __devinit void hardcode_find_bmc(
 			info->irq_setup = std_irq_setup;
 		info->slave_addr = slave_addrs[i];
 
-		if (!add_smi(info))
+		if (!add_smi(info)) {
 			if (try_smi_init(info))
 				cleanup_one_si(info);
+		} else {
+			kfree(info);
+		}
 	}
 }
 
@@ -2088,7 +2094,13 @@ static __devinit int try_init_spmi(struc
 	}
 	info->io.addr_data = spmi->addr.address;
 
-	add_smi(info);
+	pr_info("ipmi_si: SPMI: %s %#lx regsize %d spacing %d irq %d\n",
+		 (info->io.addr_type == IPMI_IO_ADDR_SPACE) ? "io" : "mem",
+		 info->io.addr_data, info->io.regsize, info->io.regspacing,
+		 info->irq);
+
+	if (add_smi(info))
+		kfree(info);
 
 	return 0;
 }
@@ -2204,7 +2216,10 @@ static int __devinit ipmi_pnp_probe(stru
 		 res, info->io.regsize, info->io.regspacing,
 		 info->irq);
 
-	return add_smi(info);
+	if (add_smi(info))
+		goto err_free;
+
+	return 0;
 
 err_free:
 	kfree(info);
@@ -2362,7 +2377,13 @@ static __devinit void try_init_dmi(struc
 	if (info->irq)
 		info->irq_setup = std_irq_setup;
 
-	add_smi(info);
+	pr_info("ipmi_si: SMBIOS: %s %#lx regsize %d spacing %d irq %d\n",
+		 (info->io.addr_type == IPMI_IO_ADDR_SPACE) ? "io" : "mem",
+		 info->io.addr_data, info->io.regsize, info->io.regspacing,
+		 info->irq);
+
+	if (add_smi(info))
+		kfree(info);
 }
 
 static void __devinit dmi_find_bmc(void)
@@ -2468,7 +2489,10 @@ static int __devinit ipmi_pci_probe(stru
 		&pdev->resource[0], info->io.regsize, info->io.regspacing,
 		info->irq);
 
-	return add_smi(info);
+	if (add_smi(info))
+		kfree(info);
+
+	return 0;
 }
 
 static void __devexit ipmi_pci_remove(struct pci_dev *pdev)
@@ -2581,7 +2605,12 @@ static int __devinit ipmi_of_probe(struc
 
 	dev_set_drvdata(&dev->dev, info);
 
-	return add_smi(info);
+	if (add_smi(info)) {
+		kfree(info);
+		return -EBUSY;
+	}
+
+	return 0;
 }
 
 static int __devexit ipmi_of_remove(struct of_device *dev)
@@ -3018,6 +3047,8 @@ static __devinit void default_find_bmc(v
 				info->io.addr_data);
 			} else
 				cleanup_one_si(info);
+		} else {
+			kfree(info);
 		}
 	}
 }
@@ -3045,7 +3076,7 @@ static int add_smi(struct smi_info *new_
 			si_to_str[new_smi->si_type]);
 	mutex_lock(&smi_infos_lock);
 	if (!is_new_interface(new_smi)) {
-		printk(KERN_CONT PFX "duplicate interface\n");
+		printk(KERN_CONT " duplicate interface\n");
 		rv = -EBUSY;
 		goto out_err;
 	}