From: Yinghai Lu <yinghai@kernel.org>
To: Dave Airlie <airlied@gmail.com>
Cc: LKML <linux-kernel@vger.kernel.org>,
"Eric W. Biederman" <ebiederm@xmission.com>,
Ingo Molnar <mingo@elte.hu>
Subject: Re: oops in ioapic_write_entry
Date: Mon, 02 Aug 2010 18:32:07 -0700 [thread overview]
Message-ID: <4C577197.9020003@kernel.org> (raw)
In-Reply-To: <AANLkTi=sNRwxmv8aKN_jo7tAx6SQ-AOFfAXJxcPnNZQp@mail.gmail.com>
On 08/02/2010 04:17 PM, Dave Airlie wrote:
>>
>> the kernel is using mptable, and the system have mcp55, so how come
>> with irq 35?
>> assume we should only have ioapic irq 0 - 23 ...
>>
>> Can you send out boot log with "debug apic=debug pci=routeirq" with
>> 2.6.32 and 2.6.35?
>
> Okay el6log is from a RHEL6 2.6.32 kernel, but it should give a good
> baseline, the 2.6.35 oops even earlier with all those options and is
> in the second attachment.
please check
[PATCH] x86: fix pin_2_irq mapping
We should not twist gsi to irq mapping if acpi is not used.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
arch/x86/include/asm/io_apic.h | 14 ++++++++++++++
arch/x86/kernel/acpi/boot.c | 4 ++--
arch/x86/kernel/apic/io_apic.c | 5 +----
3 files changed, 17 insertions(+), 6 deletions(-)
Index: linux-2.6/arch/x86/include/asm/io_apic.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/io_apic.h
+++ linux-2.6/arch/x86/include/asm/io_apic.h
@@ -185,6 +185,20 @@ int mp_find_ioapic_pin(int ioapic, u32 g
void __init mp_register_ioapic(int id, u32 address, u32 gsi_base);
extern void __init pre_init_apic_IRQ0(void);
+#ifdef CONFIG_ACPI
+unsigned int gsi_to_irq(unsigned int gsi);
+u32 irq_to_gsi(int irq);
+#else
+static inline unsigned int gsi_to_irq(unsigned int gsi)
+{
+ return gsi;
+}
+static u32 irq_to_gsi(int irq)
+{
+ return irq;
+}
+#endif
+
#else /* !CONFIG_X86_IO_APIC */
#define io_apic_assign_pci_irqs 0
Index: linux-2.6/arch/x86/kernel/acpi/boot.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/acpi/boot.c
+++ linux-2.6/arch/x86/kernel/acpi/boot.c
@@ -100,7 +100,7 @@ static u32 isa_irq_to_gsi[NR_IRQS_LEGACY
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15
};
-static unsigned int gsi_to_irq(unsigned int gsi)
+unsigned int gsi_to_irq(unsigned int gsi)
{
unsigned int irq = gsi + NR_IRQS_LEGACY;
unsigned int i;
@@ -123,7 +123,7 @@ static unsigned int gsi_to_irq(unsigned
return irq;
}
-static u32 irq_to_gsi(int irq)
+u32 irq_to_gsi(int irq)
{
unsigned int gsi;
Index: linux-2.6/arch/x86/kernel/apic/io_apic.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/apic/io_apic.c
+++ linux-2.6/arch/x86/kernel/apic/io_apic.c
@@ -1029,10 +1029,7 @@ static int pin_2_irq(int idx, int apic,
} else {
u32 gsi = mp_gsi_routing[apic].gsi_base + pin;
- if (gsi >= NR_IRQS_LEGACY)
- irq = gsi;
- else
- irq = gsi_top + gsi;
+ irq = gsi_to_irq(gsi);
}
#ifdef CONFIG_X86_32
next prev parent reply other threads:[~2010-08-03 1:33 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-08-02 5:28 oops in ioapic_write_entry Dave Airlie
2010-08-02 6:49 ` Yinghai Lu
2010-08-02 23:17 ` Dave Airlie
2010-08-03 1:32 ` Yinghai Lu [this message]
2010-08-03 1:34 ` Yinghai Lu
2010-08-03 3:13 ` Eric W. Biederman
2010-08-03 7:19 ` Yinghai Lu
2010-08-03 8:00 ` Eric W. Biederman
2010-08-03 8:04 ` Yinghai Lu
2010-08-03 8:56 ` Eric W. Biederman
2010-08-03 9:01 ` Yinghai Lu
2010-08-03 9:15 ` Eric W. Biederman
2010-08-03 9:36 ` Yinghai Lu
2010-08-03 11:08 ` Eric W. Biederman
2010-08-03 19:45 ` Yinghai Lu
2010-08-03 20:02 ` Yinghai Lu
2010-08-03 21:38 ` Eric W. Biederman
2010-08-03 23:12 ` Dave Airlie
2010-08-04 0:00 ` Yinghai Lu
2010-08-04 1:19 ` Eric W. Biederman
2010-08-04 7:33 ` Ingo Molnar
2010-08-04 8:59 ` Yinghai Lu
2010-08-04 9:26 ` Ingo Molnar
2010-08-04 12:12 ` Eric W. Biederman
2010-08-04 19:22 ` Yinghai Lu
2010-08-04 20:34 ` Eric W. Biederman
2010-08-04 22:06 ` Yinghai Lu
2010-08-03 8:00 ` Yinghai Lu
2010-08-03 8:27 ` Eric W. Biederman
2010-08-03 3:26 ` Eric W. Biederman
[not found] ` <AANLkTi=qtLkY0=h77=EVL+y1q41b_cMBODvL4Hu6A6wL@mail.gmail.com>
2010-08-03 6:00 ` Eric W. Biederman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4C577197.9020003@kernel.org \
--to=yinghai@kernel.org \
--cc=airlied@gmail.com \
--cc=ebiederm@xmission.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox