From: Hans de Goede <hdegoede@redhat.com>
To: Giel van Schijndel <me@mortis.eu>
Cc: Laurens Leemans <laurens@signips.com>,
Jonathan Cameron <jic23@cam.ac.uk>,
Jean Delvare <khali@linux-fr.org>,
lm-sensors@lm-sensors.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/2] hwmon: f71882fg: use a muxed resource lock for the Super I/O port
Date: Wed, 04 Aug 2010 13:38:50 +0200 [thread overview]
Message-ID: <4C59514A.7090401@redhat.com> (raw)
In-Reply-To: <1280669455-31283-1-git-send-email-me@mortis.eu>
Ack!
Acked-by: Hans de Goede <hdegoede@redhat.com>
On 08/01/2010 03:30 PM, Giel van Schijndel wrote:
> Sleep while acquiring a resource lock on the Super I/O port. This should
> prevent collisions from causing the hardware probe to fail with -EBUSY.
>
> Signed-off-by: Giel van Schijndel<me@mortis.eu>
> ---
> drivers/hwmon/f71882fg.c | 32 +++++++++++++++++++-------------
> 1 files changed, 19 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c
> index 7857ed3..267cb92 100644
> --- a/drivers/hwmon/f71882fg.c
> +++ b/drivers/hwmon/f71882fg.c
> @@ -113,7 +113,7 @@ static struct platform_device *f71882fg_pdev;
> /* Super-I/O Function prototypes */
> static inline int superio_inb(int base, int reg);
> static inline int superio_inw(int base, int reg);
> -static inline void superio_enter(int base);
> +static inline int superio_enter(int base);
> static inline void superio_select(int base, int ld);
> static inline void superio_exit(int base);
>
> @@ -883,11 +883,20 @@ static int superio_inw(int base, int reg)
> return val;
> }
>
> -static inline void superio_enter(int base)
> +static inline int superio_enter(int base)
> {
> + /* Don't step on other drivers' I/O space by accident */
> + if (!request_muxed_region(base, 2, DRVNAME)) {
> + printk(KERN_ERR DRVNAME ": I/O address 0x%04x already in use\n",
> + base);
> + return -EBUSY;
> + }
> +
> /* according to the datasheet the key must be send twice! */
> outb(SIO_UNLOCK_KEY, base);
> outb(SIO_UNLOCK_KEY, base);
> +
> + return 0;
> }
>
> static inline void superio_select(int base, int ld)
> @@ -899,6 +908,7 @@ static inline void superio_select(int base, int ld)
> static inline void superio_exit(int base)
> {
> outb(SIO_LOCK_KEY, base);
> + release_region(base, 2);
> }
>
> static inline int fan_from_reg(u16 reg)
> @@ -2239,21 +2249,15 @@ static int f71882fg_remove(struct platform_device *pdev)
> static int __init f71882fg_find(int sioaddr, unsigned short *address,
> struct f71882fg_sio_data *sio_data)
> {
> - int err = -ENODEV;
> u16 devid;
> -
> - /* Don't step on other drivers' I/O space by accident */
> - if (!request_region(sioaddr, 2, DRVNAME)) {
> - printk(KERN_ERR DRVNAME ": I/O address 0x%04x already in use\n",
> - (int)sioaddr);
> - return -EBUSY;
> - }
> -
> - superio_enter(sioaddr);
> + int err = superio_enter(sioaddr);
> + if (err)
> + return err;
>
> devid = superio_inw(sioaddr, SIO_REG_MANID);
> if (devid != SIO_FINTEK_ID) {
> pr_debug(DRVNAME ": Not a Fintek device\n");
> + err = -ENODEV;
> goto exit;
> }
>
> @@ -2280,6 +2284,7 @@ static int __init f71882fg_find(int sioaddr, unsigned short *address,
> default:
> printk(KERN_INFO DRVNAME ": Unsupported Fintek device: %04x\n",
> (unsigned int)devid);
> + err = -ENODEV;
> goto exit;
> }
>
> @@ -2290,12 +2295,14 @@ static int __init f71882fg_find(int sioaddr, unsigned short *address,
>
> if (!(superio_inb(sioaddr, SIO_REG_ENABLE)& 0x01)) {
> printk(KERN_WARNING DRVNAME ": Device not activated\n");
> + err = -ENODEV;
> goto exit;
> }
>
> *address = superio_inw(sioaddr, SIO_REG_ADDR);
> if (*address == 0) {
> printk(KERN_WARNING DRVNAME ": Base address not set\n");
> + err = -ENODEV;
> goto exit;
> }
> *address&= ~(REGION_LENGTH - 1); /* Ignore 3 LSB */
> @@ -2306,7 +2313,6 @@ static int __init f71882fg_find(int sioaddr, unsigned short *address,
> (int)superio_inb(sioaddr, SIO_REG_DEVREV));
> exit:
> superio_exit(sioaddr);
> - release_region(sioaddr, 2);
> return err;
> }
>
next prev parent reply other threads:[~2010-08-04 11:35 UTC|newest]
Thread overview: 81+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-23 14:12 [PATCH] hwmon: f71882fg: properly acquire I/O regions while probing Giel van Schijndel
2010-03-23 14:17 ` Giel van Schijndel
2010-03-23 23:12 ` [PATCH 1/4] [RFC] hwmon: f71882fg: Add support for the Fintek F71808E Giel van Schijndel
2010-03-23 23:12 ` [PATCH 2/4] hwmon: f71882fg: prepare for addition of watchdog support Giel van Schijndel
2010-03-23 23:12 ` [PATCH 3/4] hwmon: f71882fg: add watchdog detection code Giel van Schijndel
2010-03-23 23:12 ` [PATCH 4/4] [RFC] hwmon: f71882fg: Add watchdog API for F71808E and F71889 Giel van Schijndel
2010-03-23 23:26 ` Giel van Schijndel
2010-03-24 8:37 ` Hans de Goede
2010-03-24 9:36 ` Giel van Schijndel
2010-03-24 10:33 ` Hans de Goede
2010-03-24 15:35 ` Giel van Schijndel
2010-03-24 15:51 ` Alan Cox
2010-03-24 16:20 ` Hans de Goede
2010-03-24 20:35 ` Giel van Schijndel
2010-04-25 21:20 ` [lm-sensors] " Jim Cromie
2010-03-25 8:54 ` Giel van Schijndel
2010-03-25 10:40 ` Giel van Schijndel
2010-03-25 12:50 ` Alan Cox
2010-03-25 13:06 ` Hans de Goede
2010-03-25 13:17 ` [PATCH 1/3] resource: shared I/O region support Giel van Schijndel
2010-03-25 13:17 ` [PATCH 2/3] hwmon: f71882fg: use a muxed resource lock for the Super I/O port Giel van Schijndel
2010-03-25 13:17 ` [PATCH 3/3] [RFC] watchdog: f71808e_wdt: new watchdog driver for Fintek F71808E Giel van Schijndel
2010-03-30 9:06 ` Giel van Schijndel
2010-05-20 7:52 ` Wim Van Sebroeck
2010-05-25 21:08 ` Giel van Schijndel
2010-05-26 7:38 ` Wim Van Sebroeck
2010-07-31 21:36 ` Giel van Schijndel
2010-03-25 21:10 ` [PATCH 2/3] hwmon: f71882fg: use a muxed resource lock for the Super I/O port Hans de Goede
2010-04-25 10:35 ` Giel van Schijndel
2010-07-31 21:21 ` Giel van Schijndel
2010-03-25 15:57 ` [PATCH 1/3] resource: shared I/O region support Alan Cox
2010-03-25 18:03 ` Giel van Schijndel
2010-03-25 18:16 ` Alan Cox
2010-03-29 8:18 ` Giel van Schijndel
2010-03-29 16:07 ` Jesse Barnes
2010-03-29 17:38 ` Giel van Schijndel
2010-03-29 17:44 ` Giel van Schijndel
2010-03-29 17:45 ` H. Peter Anvin
2010-03-29 18:06 ` Jesse Barnes
2010-03-29 18:17 ` H. Peter Anvin
2010-03-29 18:29 ` Alan Cox
2010-04-02 20:29 ` Jesse Barnes
2010-03-29 18:39 ` Alan Cox
2010-03-29 18:56 ` H. Peter Anvin
2010-03-29 17:59 ` Jesse Barnes
2010-03-29 17:59 ` Jesse Barnes
2010-03-24 8:26 ` [PATCH 2/4] hwmon: f71882fg: prepare for addition of watchdog support Hans de Goede
2010-03-24 8:36 ` Hans de Goede
2010-03-24 8:25 ` [PATCH 1/4] [RFC] hwmon: f71882fg: Add support for the Fintek F71808E Hans de Goede
2010-03-24 9:23 ` [PATCH 1/4] " Giel van Schijndel
2010-03-24 10:31 ` Hans de Goede
2010-07-31 23:31 ` Giel van Schijndel
2010-08-01 6:12 ` Hans de Goede
2010-08-01 13:22 ` Giel van Schijndel
2010-08-01 13:30 ` [PATCH] " Giel van Schijndel
2010-08-04 11:36 ` Hans de Goede
2010-08-04 15:44 ` Giel van Schijndel
2010-08-13 10:56 ` Hans de Goede
2010-08-10 19:11 ` Giel van Schijndel
2010-08-13 10:01 ` Hans de Goede
2010-08-18 18:24 ` Andrew Morton
2010-08-22 18:04 ` Hans de Goede
2010-08-22 18:28 ` Giel van Schijndel
2010-08-01 13:30 ` [PATCH 1/2] hwmon: f71882fg: use a muxed resource lock for the Super I/O port Giel van Schijndel
2010-08-01 13:30 ` [PATCH 2/2] watchdog: f71808e_wdt: new watchdog driver for Fintek F71808E and F71882FG Giel van Schijndel
2010-08-04 11:38 ` Hans de Goede [this message]
2010-10-02 22:59 ` [PATCH 1/2] hwmon: f71882fg: use a muxed resource lock for the Super I/O port Giel van Schijndel
2010-10-03 1:06 ` Guenter Roeck
2010-10-03 9:01 ` Jean Delvare
2010-10-03 12:09 ` [PATCH] " Giel van Schijndel
2010-10-03 13:31 ` Guenter Roeck
2010-03-23 23:01 ` [PATCH] hwmon: f71882fg: properly acquire I/O regions while probing Giel van Schijndel
2010-03-24 8:14 ` Hans de Goede
2010-03-24 8:46 ` Giel van Schijndel
2010-03-24 9:09 ` [PATCH] hwmon: f71882fg: code cleanup Giel van Schijndel
2010-03-24 12:54 ` Jean Delvare
2010-03-24 9:09 ` [PATCH] hwmon: f71882fg: acquire I/O regions while we're working with them Giel van Schijndel
2010-03-24 9:28 ` [PATCH] hwmon: f71882fg: properly acquire I/O regions while probing Jean Delvare
2010-03-24 9:29 ` Jean Delvare
2010-03-24 9:34 ` Giel van Schijndel
2010-03-24 12:54 ` Jean Delvare
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4C59514A.7090401@redhat.com \
--to=hdegoede@redhat.com \
--cc=jic23@cam.ac.uk \
--cc=khali@linux-fr.org \
--cc=laurens@signips.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lm-sensors@lm-sensors.org \
--cc=me@mortis.eu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).