Re: [PATCH v2] AT91: Add flexibity board support

[Ryan Mallon <ryan@bluewatersys.com>]

On 09/13/2010 10:18 PM, Maxim Osipov wrote:
> Hello,
> 
> This patch adds support for AT91 Flexibity board.

Couple more comments below,

> From ccb19f0d6dbda5356e64c1ce5d0fe1396c548f1a Mon Sep 17 00:00:00 2001
> From: Maxim Osipov <maxim.osipov@gmail.com>
> Date: Sun, 12 Sep 2010 16:23:48 +0400
> Subject: [PATCH v2] AT91: Add flexibity board support
> 
> Signed-off-by: Maxim Osipov <maxim.osipov@gmail.com>
> ---

> +#include <linux/init.h>
> +#include <linux/platform_device.h>
> +#include <linux/spi/spi.h>
> +#include <linux/input.h>
> +
> +#include <asm/mach-types.h>
> +
> +#include <asm/mach/arch.h>
> +#include <asm/mach/map.h>
> +#include <asm/mach/irq.h>
> +
> +#include <mach/hardware.h>
> +#include <mach/board.h>
> +#include <mach/gpio.h>

Use linux/gpio.h

> +
> +#include "generic.h"
> +
> +

Single blank line here, and between functions.

> +
> +static void __init flexibity_board_init(void)
> +{
> +	/* Serial */
> +	at91_add_device_serial();
> +	/* USB Host */
> +	at91_add_device_usbh(&flexibity_usbh_data);
> +	/* USB Device */
> +	at91_add_device_udc(&flexibity_udc_data);
> +	/* SPI */
> +	at91_add_device_spi(flexibity_spi_devices,
> +		ARRAY_SIZE(flexibity_spi_devices));
> +	/* MMC */
> +	at91_add_device_mmc(0, &flexibity_mmc_data);
> +	/* LEDs */
> +	at91_gpio_leds(flexibity_leds, ARRAY_SIZE(flexibity_leds));

Can we drop all the comments inside this function please. They don't add
any information and they make it harder to read the actual code.

~Ryan

-- 
Bluewater Systems Ltd - ARM Technology Solution Centre

Ryan Mallon         		5 Amuri Park, 404 Barbadoes St
ryan@bluewatersys.com         	PO Box 13 889, Christchurch 8013
http://www.bluewatersys.com	New Zealand
Phone: +64 3 3779127		Freecall: Australia 1800 148 751
Fax:   +64 3 3779135			  USA 1800 261 2934