From: Maurus Cuelenaere <mcuelenaere@gmail.com>
To: Masayuki Ohtake <masa-korg@dsn.okisemi.com>
Cc: Michal Nazarewicz <m.nazarewicz@samsung.com>,
linux-usb <linux-usb@vger.kernel.org>,
Toshiharu Okada <okada533@dsn.okisemi.com>,
Takahiro Shimizu <shimizu394@dsn.okisemi.com>,
Tomoya Morinaga <morinaga526@dsn.okisemi.com>,
MeeGo <meego-dev@meego.com>, LKML <linux-kernel@vger.kernel.org>,
"Wang, Qi" <qi.wang@intel.com>,
"Wang, Yong Y" <yong.y.wang@intel.com>,
Andrew <andrew.chih.howe.khor@intel.com>,
Intel OTC <joel.clark@intel.com>,
"Foster, Margie" <margie.foster@intel.com>,
Arjan <arjan@linux.intel.com>
Subject: Re: [PATCH v3] USB device driver of Topcliff PCH
Date: Thu, 16 Sep 2010 15:48:53 +0200 [thread overview]
Message-ID: <4C922045.5090408@gmail.com> (raw)
In-Reply-To: <4C921E19.7010101@dsn.okisemi.com>
Op 16-09-10 15:39, Masayuki Ohtake schreef:
> This patch was modified according to the comments of Maurus and Michal.
This isn't a commit description, if you want to put information about what
changed compared to the previous patch, do it ...
>
> Signed-off-by: Masayuki Ohtake <masa-korg@dsn.okisemi.com>
> ---
... here
(and add a "---\n")
> drivers/usb/gadget/Kconfig | 24 +
> drivers/usb/gadget/Makefile | 2 +-
> drivers/usb/gadget/gadget_chips.h | 7 +
> drivers/usb/gadget/pch_udc.c | 3343 +++++++++++++++++++++++++++++++++++++
> 4 files changed, 3375 insertions(+), 1 deletions(-)
> create mode 100644 drivers/usb/gadget/pch_udc.c
>
[snip]
> +static int speed_fs;
> +module_param_named(speed_fs, speed_fs, bool, S_IRUGO);
> +MODULE_PARM_DESC(speed_fs, "true for Full speed operation");
> +MODULE_DESCRIPTION("OKISEMI PCH USB Device Controller");
> +MODULE_LICENSE("GPL");
MODULE_{DESCRIPTION,LICENSE} is normally put at the end of the file; I don't
know if there's a written rule for that? (if not, you can ignore this)
Also, there's no MODULE_AUTHOR?
[snip]
> +static inline void pch_udc_bit_set(struct pch_udc_dev *dev,
> + unsigned long reg,
> + unsigned long bitmask)
> +{
> + pch_udc_writel((dev), ((pch_udc_readl((dev), (reg)) | (bitmask))),
> + (reg));
nitpick: remove the unneeded parentheses
> +}
> +static inline void pch_udc_bit_clr(struct pch_udc_dev *dev,
> + unsigned long reg,
> + unsigned long bitmask)
> +{
> + pch_udc_writel((dev), (pch_udc_readl((dev), (reg)) & (~(bitmask))),
> + (reg));
and here
> +}
> +
[snip]
> +static inline void pch_udc_ep_bit_set(struct pch_udc_ep *ep,
> + unsigned long reg,
> + unsigned long bitmask)
> +{
> + pch_udc_ep_writel((ep), ((pch_udc_ep_readl((ep), (reg)) | (bitmask))),
> + (reg));
and here
> +}
> +static inline void pch_udc_ep_bit_clr(struct pch_udc_ep *ep,
> + unsigned long reg,
> + unsigned long bitmask)
> +{
> + pch_udc_ep_writel((ep), (pch_udc_ep_readl((ep), (reg)) & (~(bitmask))),
> + (reg));
here too
> +}
> +
--
Maurus Cuelenaere
next prev parent reply other threads:[~2010-09-16 13:48 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-09-16 13:39 [PATCH v3] USB device driver of Topcliff PCH Masayuki Ohtake
2010-09-16 13:48 ` Maurus Cuelenaere [this message]
2010-09-20 8:44 ` Michał Nazarewicz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4C922045.5090408@gmail.com \
--to=mcuelenaere@gmail.com \
--cc=andrew.chih.howe.khor@intel.com \
--cc=arjan@linux.intel.com \
--cc=joel.clark@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=m.nazarewicz@samsung.com \
--cc=margie.foster@intel.com \
--cc=masa-korg@dsn.okisemi.com \
--cc=meego-dev@meego.com \
--cc=morinaga526@dsn.okisemi.com \
--cc=okada533@dsn.okisemi.com \
--cc=qi.wang@intel.com \
--cc=shimizu394@dsn.okisemi.com \
--cc=yong.y.wang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox