[PATCH 1/2] Add ALS drivers for the apds9802als

[PATCH 1/2] Add ALS drivers for the apds9802als

[Alan Cox]

From: anantha <anantha.narayanan@intel.com>

This adds support for the ADPS9802ALS sensor.

Cleanup by Alan Cox
	- move mutexes to cover more things
	- report I/O errors back to user space
	- report range and values in LUX

Signed-off-by: Anantha Narayanan <anantha.narayanan@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
---

 drivers/misc/Kconfig       |   10 +
 drivers/misc/Makefile      |    1 
 drivers/misc/apds9802als.c |  303 ++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 314 insertions(+), 0 deletions(-)
 create mode 100644 drivers/misc/apds9802als.c


diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 53b21ff..d6ec9ce 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -293,6 +293,16 @@ config SGI_GRU_DEBUG
 	This option enables addition debugging code for the SGI GRU driver. If
 	you are unsure, say N.
 
+config APDS9802ALS
+	tristate "Medfield Avago APDS9802 ALS Sensor module"
+	depends on I2C
+	help
+	  If you say yes here you get support for the ALS APDS9802 ambient
+	  light sensor.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called apds9802als.
+
 config ISL29003
 	tristate "Intersil ISL29003 ambient light sensor"
 	depends on I2C && SYSFS
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 4c771a2..0e5f2a5 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_SGI_XP)		+= sgi-xp/
 obj-$(CONFIG_SGI_GRU)		+= sgi-gru/
 obj-$(CONFIG_CS5535_MFGPT)	+= cs5535-mfgpt.o
 obj-$(CONFIG_HP_ILO)		+= hpilo.o
+obj-$(CONFIG_APDS9802ALS)	+= apds9802als.o
 obj-$(CONFIG_ISL29003)		+= isl29003.o
 obj-$(CONFIG_SENSORS_TSL2550)	+= tsl2550.o
 obj-$(CONFIG_EP93XX_PWM)	+= ep93xx_pwm.o
diff --git a/drivers/misc/apds9802als.c b/drivers/misc/apds9802als.c
new file mode 100644
index 0000000..cfd004a
--- /dev/null
+++ b/drivers/misc/apds9802als.c
@@ -0,0 +1,303 @@
+/*
+ * apds9802als.c - apds9802  ALS Driver
+ *
+ * Copyright (C) 2009 Intel Corp
+ *
+ *  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/sysfs.h>
+#include <linux/hwmon-sysfs.h>
+
+#define ALS_MIN_RANGE_VAL 1
+#define ALS_MAX_RANGE_VAL 2
+#define POWER_STA_ENABLE 1
+#define POWER_STA_DISABLE 0
+#define APDS9802ALS_I2C_ADDR 0x29
+
+#define DRIVER_NAME "apds9802als"
+
+struct als_data {
+	struct device *hwmon_dev;
+	bool needresume;
+	struct mutex mutex;
+};
+
+static ssize_t als_sensing_range_show(struct device *dev,
+			struct device_attribute *attr,  char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int  val;
+
+	val = i2c_smbus_read_byte_data(client, 0x81);
+	if (val < 0)
+		return val;
+	if (val & 1)
+		return sprintf(buf, "4000\n");
+	else
+		return sprintf(buf, "64000\n");
+}
+
+static ssize_t als_lux_output_data_show(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct als_data *data = i2c_get_clientdata(client);
+	unsigned int ret_val;
+	int temp;
+
+	/* Protect against parallel reads */
+	mutex_lock(&data->mutex);
+	temp = i2c_smbus_read_byte_data(client, 0x8C);/*LSB data*/
+	if (temp < 0) {
+		ret_val = temp;
+		goto failed;
+	}
+	ret_val = i2c_smbus_read_byte_data(client, 0x8D);/*MSB data*/
+	if (ret_val < 0)
+		goto failed;
+	mutex_unlock(&data->mutex);
+	ret_val = (ret_val << 8) | temp;
+	return sprintf(buf, "%d\n", ret_val);
+failed:
+	mutex_unlock(&data->mutex);
+	return ret_val;
+}
+
+static ssize_t als_sensing_range_store(struct device *dev,
+		struct device_attribute *attr, const  char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct als_data *data = i2c_get_clientdata(client);
+	unsigned int ret_val;
+	unsigned long val;
+
+	if (strict_strtoul(buf, 10, &val))
+		return -EINVAL;
+	if (val != 1 && val != 2)
+		return -EINVAL;
+
+	/* Make sure nobody else reads/modifies/writes 0x81 while we
+	   are active */
+
+	mutex_lock(&data->mutex);
+
+	ret_val = i2c_smbus_read_byte_data(client, 0x81);
+	if (ret_val < 0)
+		goto fail;
+
+	/* Reset the bits before setting them */
+	ret_val = ret_val & 0xFA;
+
+	if (val == 1) /* Setting the continous measurement up to 8k LUX */
+		ret_val = (ret_val | 0x05);
+	else /* Setting the continous measurement up to 64k LUX*/
+		ret_val = (ret_val | 0x04);
+
+	ret_val = i2c_smbus_write_byte_data(client, 0x81, ret_val);
+	if (ret_val >= 0) {
+		/* All OK */
+		mutex_unlock(&data->mutex);
+		return count;
+	}
+fail:
+	mutex_unlock(&data->mutex);
+	return ret_val;
+}
+
+static ssize_t als_power_status_show(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int ret_val;
+	ret_val = i2c_smbus_read_byte_data(client, 0x80);
+	if (ret_val < 0)
+		return ret_val;
+	ret_val = ret_val & 0x01;
+	return sprintf(buf, "%d\n", ret_val);
+}
+
+static int als_set_power_state(struct i2c_client *client, bool on_off)
+{
+	int ret_val;
+	struct als_data *data = i2c_get_clientdata(client);
+
+	mutex_lock(&data->mutex);
+	ret_val = i2c_smbus_read_byte_data(client, 0x80);
+	if (ret_val < 0)
+		goto fail;
+	if (on_off)
+		ret_val = ret_val | 0x01;
+	else
+		ret_val = ret_val & 0xFE;
+	ret_val = i2c_smbus_write_byte_data(client, 0x80, ret_val);
+fail:
+	mutex_unlock(&data->mutex);
+	return ret_val;
+}
+
+static ssize_t als_power_status_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct als_data *data = i2c_get_clientdata(client);
+	unsigned long val;
+	int ret_val = 0;
+
+	if (strict_strtoul(buf, 10, &val))
+		return -EINVAL;
+	if (val == POWER_STA_ENABLE) {
+		ret_val = als_set_power_state(client, true);
+		data->needresume = true;
+	} else if (val == POWER_STA_DISABLE) {
+		ret_val = als_set_power_state(client, false);
+		data->needresume = false;
+	} else
+		return -EINVAL;
+	if (ret_val < 0)
+		return ret_val;
+	return count;
+}
+
+static DEVICE_ATTR(sensing_range, S_IRUGO | S_IWUSR,
+	als_sensing_range_show, als_sensing_range_store);
+static DEVICE_ATTR(lux_output, S_IRUGO, als_lux_output_data_show, NULL);
+static DEVICE_ATTR(power_state, S_IRUGO | S_IWUSR,
+	als_power_status_show, als_power_status_store);
+
+static struct attribute *mid_att_als[] = {
+	&dev_attr_sensing_range.attr,
+	&dev_attr_lux_output.attr,
+	&dev_attr_power_state.attr,
+	NULL
+};
+
+static struct attribute_group m_als_gr = {
+	.name = "apds9802als",
+	.attrs = mid_att_als
+};
+
+static int als_set_default_config(struct i2c_client *client)
+{
+	int ret_val;
+	/* Write the command and then switch on */
+	ret_val = i2c_smbus_write_byte_data(client, 0x80, 0x01);
+	if (ret_val < 0) {
+		dev_err(&client->dev, "failed default switch on write\n");
+		return ret_val;
+	}
+	/* Continous from 1Lux to 64k Lux */
+	ret_val = i2c_smbus_write_byte_data(client, 0x81, 0x04);
+	if (ret_val < 0)
+		dev_err(&client->dev, "failed default LUX on write\n");
+	return ret_val;
+}
+
+static int  apds9802als_probe(struct i2c_client *client,
+					const struct i2c_device_id *id)
+{
+	int res;
+	struct als_data *data;
+
+	data = kzalloc(sizeof(struct als_data), GFP_KERNEL);
+	if (data == NULL) {
+		dev_err(&client->dev, "Memory allocation failed");
+		return -ENOMEM;
+	}
+	i2c_set_clientdata(client, data);
+	res = sysfs_create_group(&client->dev.kobj, &m_als_gr);
+	if (res) {
+		dev_err(&client->dev, "device create file failed\n");
+		goto als_error1;
+	}
+	dev_info(&client->dev,
+		"%s apds9802als: ALS chip found\n", client->name);
+	als_set_default_config(client);
+	data->needresume = true;
+	mutex_init(&data->mutex);
+	return res;
+als_error1:
+	i2c_set_clientdata(client, NULL);
+	kfree(data);
+	return res;
+}
+
+static int apds9802als_remove(struct i2c_client *client)
+{
+	struct als_data *data = i2c_get_clientdata(client);
+	sysfs_remove_group(&client->dev.kobj, &m_als_gr);
+	kfree(data);
+	return 0;
+}
+
+static int apds9802als_suspend(struct i2c_client *client, pm_message_t mesg)
+{
+	als_set_power_state(client, false);
+	return 0;
+}
+
+static int apds9802als_resume(struct i2c_client *client)
+{
+	struct als_data *data = i2c_get_clientdata(client);
+
+	if (data->needresume == true)
+		als_set_power_state(client, true);
+	return 0;
+}
+
+static struct i2c_device_id apds9802als_id[] = {
+	{ DRIVER_NAME, 0 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(i2c, apds9802als_id);
+
+static struct i2c_driver apds9802als_driver = {
+	.driver = {
+	.name = DRIVER_NAME,
+	.owner = THIS_MODULE,
+	},
+	.probe = apds9802als_probe,
+	.remove = apds9802als_remove,
+	.suspend = apds9802als_suspend,
+	.resume = apds9802als_resume,
+	.id_table = apds9802als_id,
+};
+
+static int __init sensor_apds9802als_init(void)
+{
+	return i2c_add_driver(&apds9802als_driver);
+}
+
+static void  __exit sensor_apds9802als_exit(void)
+{
+	i2c_del_driver(&apds9802als_driver);
+}
+module_init(sensor_apds9802als_init);
+module_exit(sensor_apds9802als_exit);
+
+MODULE_AUTHOR("Anantha Narayanan <Anantha.Narayanan@intel.com");
+MODULE_DESCRIPTION("Avago apds9802als ALS Driver");
+MODULE_LICENSE("GPL v2");

[PATCH 2/2] apds9802als: fix als sensing range value

[Alan Cox]

From: Hong Liu <hong.liu@intel.com>

The 4K and 64K in the hw spec acutally means 4095 (12bit) and 65535 (16bit).

Signed-off-by: Hong Liu <hong.liu@intel.com>
---

 drivers/misc/apds9802als.c |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)


diff --git a/drivers/misc/apds9802als.c b/drivers/misc/apds9802als.c
index cfd004a..a55a215 100644
--- a/drivers/misc/apds9802als.c
+++ b/drivers/misc/apds9802als.c
@@ -55,9 +55,9 @@ static ssize_t als_sensing_range_show(struct device *dev,
 	if (val < 0)
 		return val;
 	if (val & 1)
-		return sprintf(buf, "4000\n");
+		return sprintf(buf, "4095\n");
 	else
-		return sprintf(buf, "64000\n");
+		return sprintf(buf, "65535\n");
 }
 
 static ssize_t als_lux_output_data_show(struct device *dev,
@@ -111,7 +111,7 @@ static ssize_t als_sensing_range_store(struct device *dev,
 	/* Reset the bits before setting them */
 	ret_val = ret_val & 0xFA;
 
-	if (val == 1) /* Setting the continous measurement up to 8k LUX */
+	if (val == 1) /* Setting the continous measurement up to 4k LUX */
 		ret_val = (ret_val | 0x05);
 	else /* Setting the continous measurement up to 64k LUX*/
 		ret_val = (ret_val | 0x04);

Re: [PATCH 1/2] Add ALS drivers for the apds9802als

[Jonathan Cameron]

Hi Alan,

Looks pretty clean to me.

Comments inline on attribute formats and name of attributes.

I'd like to see the range setting moved over to values
in lux as you have done for the  read back.  The naming issue
is just a suggestion that might make things a little clearer.

Thanks,

Jonathan
> From: anantha <anantha.narayanan@intel.com>
> 
> This adds support for the ADPS9802ALS sensor.
> 
> Cleanup by Alan Cox
> 	- move mutexes to cover more things
> 	- report I/O errors back to user space
> 	- report range and values in LUX
> 
> Signed-off-by: Anantha Narayanan <anantha.narayanan@intel.com>
> Signed-off-by: Alan Cox <alan@linux.intel.com>
> ---
> 
>  drivers/misc/Kconfig       |   10 +
>  drivers/misc/Makefile      |    1 
>  drivers/misc/apds9802als.c |  303 ++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 314 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/misc/apds9802als.c
> 
> 
> diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
> index 53b21ff..d6ec9ce 100644
> --- a/drivers/misc/Kconfig
> +++ b/drivers/misc/Kconfig
> @@ -293,6 +293,16 @@ config SGI_GRU_DEBUG
>  	This option enables addition debugging code for the SGI GRU driver. If
>  	you are unsure, say N.
>  
> +config APDS9802ALS
> +	tristate "Medfield Avago APDS9802 ALS Sensor module"
> +	depends on I2C
> +	help
> +	  If you say yes here you get support for the ALS APDS9802 ambient
> +	  light sensor.
> +
> +	  This driver can also be built as a module.  If so, the module
> +	  will be called apds9802als.
> +
>  config ISL29003
>  	tristate "Intersil ISL29003 ambient light sensor"
>  	depends on I2C && SYSFS
> diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
> index 4c771a2..0e5f2a5 100644
> --- a/drivers/misc/Makefile
> +++ b/drivers/misc/Makefile
> @@ -23,6 +23,7 @@ obj-$(CONFIG_SGI_XP)		+= sgi-xp/
>  obj-$(CONFIG_SGI_GRU)		+= sgi-gru/
>  obj-$(CONFIG_CS5535_MFGPT)	+= cs5535-mfgpt.o
>  obj-$(CONFIG_HP_ILO)		+= hpilo.o
> +obj-$(CONFIG_APDS9802ALS)	+= apds9802als.o
>  obj-$(CONFIG_ISL29003)		+= isl29003.o
>  obj-$(CONFIG_SENSORS_TSL2550)	+= tsl2550.o
>  obj-$(CONFIG_EP93XX_PWM)	+= ep93xx_pwm.o
> diff --git a/drivers/misc/apds9802als.c b/drivers/misc/apds9802als.c
> new file mode 100644
> index 0000000..cfd004a
> --- /dev/null
> +++ b/drivers/misc/apds9802als.c
> @@ -0,0 +1,303 @@
> +/*
> + * apds9802als.c - apds9802  ALS Driver
> + *
> + * Copyright (C) 2009 Intel Corp
> + *
> + *  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; version 2 of the License.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License along
> + * with this program; if not, write to the Free Software Foundation, Inc.,
> + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
> + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> + *
> + */
> +
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/slab.h>
> +#include <linux/i2c.h>
> +#include <linux/err.h>
> +#include <linux/delay.h>
> +#include <linux/mutex.h>
> +#include <linux/sysfs.h>
> +#include <linux/hwmon-sysfs.h>
> +
> +#define ALS_MIN_RANGE_VAL 1
> +#define ALS_MAX_RANGE_VAL 2
> +#define POWER_STA_ENABLE 1
> +#define POWER_STA_DISABLE 0
> +#define APDS9802ALS_I2C_ADDR 0x29
> +
> +#define DRIVER_NAME "apds9802als"
> +
> +struct als_data {
> +	struct device *hwmon_dev;
> +	bool needresume;
> +	struct mutex mutex;
> +};
> +
> +static ssize_t als_sensing_range_show(struct device *dev,
> +			struct device_attribute *attr,  char *buf)
> +{
> +	struct i2c_client *client = to_i2c_client(dev);
> +	int  val;
> +
> +	val = i2c_smbus_read_byte_data(client, 0x81);
> +	if (val < 0)
> +		return val;
> +	if (val & 1)
> +		return sprintf(buf, "4000\n");
> +	else
> +		return sprintf(buf, "64000\n");
> +}
> +
> +static ssize_t als_lux_output_data_show(struct device *dev,
> +			struct device_attribute *attr, char *buf)
> +{
> +	struct i2c_client *client = to_i2c_client(dev);
> +	struct als_data *data = i2c_get_clientdata(client);
> +	unsigned int ret_val;
> +	int temp;
> +
> +	/* Protect against parallel reads */
> +	mutex_lock(&data->mutex);
> +	temp = i2c_smbus_read_byte_data(client, 0x8C);/*LSB data*/
> +	if (temp < 0) {
> +		ret_val = temp;
> +		goto failed;
> +	}
> +	ret_val = i2c_smbus_read_byte_data(client, 0x8D);/*MSB data*/
> +	if (ret_val < 0)
> +		goto failed;
> +	mutex_unlock(&data->mutex);
> +	ret_val = (ret_val << 8) | temp;
> +	return sprintf(buf, "%d\n", ret_val);
> +failed:
> +	mutex_unlock(&data->mutex);
> +	return ret_val;
> +}
> +
> +static ssize_t als_sensing_range_store(struct device *dev,
> +		struct device_attribute *attr, const  char *buf, size_t count)
> +{
> +	struct i2c_client *client = to_i2c_client(dev);
> +	struct als_data *data = i2c_get_clientdata(client);
> +	unsigned int ret_val;
> +	unsigned long val;
> +
> +	if (strict_strtoul(buf, 10, &val))
> +		return -EINVAL;
> +	if (val != 1 && val != 2)
> +		return -EINVAL;
The lack of matching of the sensing range store input (magic numbers)
with the output (4000 or 64000) could do with unifying.  Perhaps this interface
could take one of those two values with either the [] notation to say 
which or an als_sensing_range_available attribute to say which ones exist.

> +
> +	/* Make sure nobody else reads/modifies/writes 0x81 while we
> +	   are active */
> +
> +	mutex_lock(&data->mutex);
> +
> +	ret_val = i2c_smbus_read_byte_data(client, 0x81);
> +	if (ret_val < 0)
> +		goto fail;
> +
> +	/* Reset the bits before setting them */
> +	ret_val = ret_val & 0xFA;
> +
> +	if (val == 1) /* Setting the continous measurement up to 8k LUX */
> +		ret_val = (ret_val | 0x05);
> +	else /* Setting the continous measurement up to 64k LUX*/
> +		ret_val = (ret_val | 0x04);
> +
> +	ret_val = i2c_smbus_write_byte_data(client, 0x81, ret_val);
> +	if (ret_val >= 0) {
> +		/* All OK */
> +		mutex_unlock(&data->mutex);
> +		return count;
> +	}
> +fail:
> +	mutex_unlock(&data->mutex);
> +	return ret_val;
> +}
> +
> +static ssize_t als_power_status_show(struct device *dev,
> +			struct device_attribute *attr, char *buf)
> +{
> +	struct i2c_client *client = to_i2c_client(dev);
> +	int ret_val;
> +	ret_val = i2c_smbus_read_byte_data(client, 0x80);
> +	if (ret_val < 0)
> +		return ret_val;
> +	ret_val = ret_val & 0x01;
> +	return sprintf(buf, "%d\n", ret_val);
> +}
> +
> +static int als_set_power_state(struct i2c_client *client, bool on_off)
> +{
> +	int ret_val;
> +	struct als_data *data = i2c_get_clientdata(client);
> +
> +	mutex_lock(&data->mutex);
> +	ret_val = i2c_smbus_read_byte_data(client, 0x80);
> +	if (ret_val < 0)
> +		goto fail;
> +	if (on_off)
> +		ret_val = ret_val | 0x01;
> +	else
> +		ret_val = ret_val & 0xFE;
> +	ret_val = i2c_smbus_write_byte_data(client, 0x80, ret_val);
> +fail:
> +	mutex_unlock(&data->mutex);
> +	return ret_val;
> +}
> +
> +static ssize_t als_power_status_store(struct device *dev,
> +		struct device_attribute *attr, const char *buf, size_t count)
> +{
> +	struct i2c_client *client = to_i2c_client(dev);
> +	struct als_data *data = i2c_get_clientdata(client);
> +	unsigned long val;
> +	int ret_val = 0;
> +
> +	if (strict_strtoul(buf, 10, &val))
> +		return -EINVAL;
> +	if (val == POWER_STA_ENABLE) {
> +		ret_val = als_set_power_state(client, true);
> +		data->needresume = true;
> +	} else if (val == POWER_STA_DISABLE) {
> +		ret_val = als_set_power_state(client, false);
> +		data->needresume = false;
> +	} else
> +		return -EINVAL;
> +	if (ret_val < 0)
> +		return ret_val;
> +	return count;
> +}
> +
> +static DEVICE_ATTR(sensing_range, S_IRUGO | S_IWUSR,
> +	als_sensing_range_show, als_sensing_range_store);
> +static DEVICE_ATTR(lux_output, S_IRUGO, als_lux_output_data_show, NULL);
> +static DEVICE_ATTR(power_state, S_IRUGO | S_IWUSR,
> +	als_power_status_show, als_power_status_store);
> +
> +static struct attribute *mid_att_als[] = {
Could we naming the sensing range so that it is clearly associated with
the lux_output?  Perhaps lux_output_range?
> +	&dev_attr_sensing_range.attr,
> +	&dev_attr_lux_output.attr,
Why output? Surely this is an input as far as the machine with the sensor
is concerned?  Perhaps switch to the _input convention of hwmon for this.
> +	&dev_attr_power_state.attr,
> +	NULL
> +};
> +
> +static struct attribute_group m_als_gr = {
> +	.name = "apds9802als",
> +	.attrs = mid_att_als
> +};
> +
> +static int als_set_default_config(struct i2c_client *client)
> +{
> +	int ret_val;
> +	/* Write the command and then switch on */
> +	ret_val = i2c_smbus_write_byte_data(client, 0x80, 0x01);
> +	if (ret_val < 0) {
> +		dev_err(&client->dev, "failed default switch on write\n");
> +		return ret_val;
> +	}
> +	/* Continous from 1Lux to 64k Lux */
> +	ret_val = i2c_smbus_write_byte_data(client, 0x81, 0x04);
> +	if (ret_val < 0)
> +		dev_err(&client->dev, "failed default LUX on write\n");
> +	return ret_val;
> +}
> +
> +static int  apds9802als_probe(struct i2c_client *client,
> +					const struct i2c_device_id *id)
> +{
> +	int res;
> +	struct als_data *data;
> +
> +	data = kzalloc(sizeof(struct als_data), GFP_KERNEL);
> +	if (data == NULL) {
> +		dev_err(&client->dev, "Memory allocation failed");
> +		return -ENOMEM;
> +	}
> +	i2c_set_clientdata(client, data);
> +	res = sysfs_create_group(&client->dev.kobj, &m_als_gr);
> +	if (res) {
> +		dev_err(&client->dev, "device create file failed\n");
> +		goto als_error1;
> +	}
> +	dev_info(&client->dev,
> +		"%s apds9802als: ALS chip found\n", client->name);
> +	als_set_default_config(client);
> +	data->needresume = true;
> +	mutex_init(&data->mutex);
> +	return res;
> +als_error1:
> +	i2c_set_clientdata(client, NULL);
> +	kfree(data);
> +	return res;
> +}
> +
> +static int apds9802als_remove(struct i2c_client *client)
> +{
> +	struct als_data *data = i2c_get_clientdata(client);
> +	sysfs_remove_group(&client->dev.kobj, &m_als_gr);
> +	kfree(data);
> +	return 0;
> +}
> +
> +static int apds9802als_suspend(struct i2c_client *client, pm_message_t mesg)
> +{
> +	als_set_power_state(client, false);
> +	return 0;
> +}
> +
> +static int apds9802als_resume(struct i2c_client *client)
> +{
> +	struct als_data *data = i2c_get_clientdata(client);
> +
> +	if (data->needresume == true)
> +		als_set_power_state(client, true);
> +	return 0;
> +}
> +
> +static struct i2c_device_id apds9802als_id[] = {
> +	{ DRIVER_NAME, 0 },
> +	{ }
> +};
> +
> +MODULE_DEVICE_TABLE(i2c, apds9802als_id);
> +
> +static struct i2c_driver apds9802als_driver = {
> +	.driver = {
> +	.name = DRIVER_NAME,
> +	.owner = THIS_MODULE,
> +	},
> +	.probe = apds9802als_probe,
> +	.remove = apds9802als_remove,
> +	.suspend = apds9802als_suspend,
> +	.resume = apds9802als_resume,
> +	.id_table = apds9802als_id,
> +};
> +
> +static int __init sensor_apds9802als_init(void)
> +{
> +	return i2c_add_driver(&apds9802als_driver);
> +}
> +
> +static void  __exit sensor_apds9802als_exit(void)
> +{
> +	i2c_del_driver(&apds9802als_driver);
> +}
> +module_init(sensor_apds9802als_init);
> +module_exit(sensor_apds9802als_exit);
> +
> +MODULE_AUTHOR("Anantha Narayanan <Anantha.Narayanan@intel.com");
> +MODULE_DESCRIPTION("Avago apds9802als ALS Driver");
> +MODULE_LICENSE("GPL v2");
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/

[PATCH 1/2] Add ALS drivers for the apds9802als

[Alan Cox]

From: anantha <anantha.narayanan@intel.com>

This adds support for the ADPS9802ALS sensor.

Cleanup by Alan Cox
	- move mutexes to cover more things
	- report I/O errors back to user space
	- report range and values in LUX

Signed-off-by: Anantha Narayanan <anantha.narayanan@intel.com>
[The 4K and 64K in the hw spec actually means 4095 (12bit) and 65535 (16bit).]
Signed-off-by: Hong Liu <hong.liu@intel.com>
[Updated to match the ALS light API interface convention from Samu]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
---

 drivers/misc/Kconfig       |   10 +
 drivers/misc/Makefile      |    1 
 drivers/misc/apds9802als.c |  308 ++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 319 insertions(+), 0 deletions(-)
 create mode 100644 drivers/misc/apds9802als.c


diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 9d0a84d..45801d6 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -293,6 +293,16 @@ config SGI_GRU_DEBUG
 	This option enables addition debugging code for the SGI GRU driver. If
 	you are unsure, say N.
 
+config APDS9802ALS
+	tristate "Medfield Avago APDS9802 ALS Sensor module"
+	depends on I2C
+	help
+	  If you say yes here you get support for the ALS APDS9802 ambient
+	  light sensor.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called apds9802als.
+
 config ISL29003
 	tristate "Intersil ISL29003 ambient light sensor"
 	depends on I2C && SYSFS
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index d71d5a7..c1d59f3 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_SGI_XP)		+= sgi-xp/
 obj-$(CONFIG_SGI_GRU)		+= sgi-gru/
 obj-$(CONFIG_CS5535_MFGPT)	+= cs5535-mfgpt.o
 obj-$(CONFIG_HP_ILO)		+= hpilo.o
+obj-$(CONFIG_APDS9802ALS)	+= apds9802als.o
 obj-$(CONFIG_ISL29003)		+= isl29003.o
 obj-$(CONFIG_SENSORS_TSL2550)	+= tsl2550.o
 obj-$(CONFIG_EP93XX_PWM)	+= ep93xx_pwm.o
diff --git a/drivers/misc/apds9802als.c b/drivers/misc/apds9802als.c
new file mode 100644
index 0000000..fbe4960
--- /dev/null
+++ b/drivers/misc/apds9802als.c
@@ -0,0 +1,308 @@
+/*
+ * apds9802als.c - apds9802  ALS Driver
+ *
+ * Copyright (C) 2009 Intel Corp
+ *
+ *  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/sysfs.h>
+#include <linux/hwmon-sysfs.h>
+
+#define ALS_MIN_RANGE_VAL 1
+#define ALS_MAX_RANGE_VAL 2
+#define POWER_STA_ENABLE 1
+#define POWER_STA_DISABLE 0
+#define APDS9802ALS_I2C_ADDR 0x29
+
+#define DRIVER_NAME "apds9802als"
+
+struct als_data {
+	struct device *hwmon_dev;
+	bool needresume;
+	struct mutex mutex;
+};
+
+static ssize_t als_sensing_range_show(struct device *dev,
+			struct device_attribute *attr,  char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int  val;
+
+	val = i2c_smbus_read_byte_data(client, 0x81);
+	if (val < 0)
+		return val;
+	if (val & 1)
+		return sprintf(buf, "4095\n");
+	else
+		return sprintf(buf, "65535\n");
+}
+
+static ssize_t als_lux0_input_data_show(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct als_data *data = i2c_get_clientdata(client);
+	unsigned int ret_val;
+	int temp;
+
+	/* Protect against parallel reads */
+	mutex_lock(&data->mutex);
+	temp = i2c_smbus_read_byte_data(client, 0x8C);/*LSB data*/
+	if (temp < 0) {
+		ret_val = temp;
+		goto failed;
+	}
+	ret_val = i2c_smbus_read_byte_data(client, 0x8D);/*MSB data*/
+	if (ret_val < 0)
+		goto failed;
+	mutex_unlock(&data->mutex);
+	ret_val = (ret_val << 8) | temp;
+	return sprintf(buf, "%d\n", ret_val);
+failed:
+	mutex_unlock(&data->mutex);
+	return ret_val;
+}
+
+static ssize_t als_sensing_range_store(struct device *dev,
+		struct device_attribute *attr, const  char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct als_data *data = i2c_get_clientdata(client);
+	unsigned int ret_val;
+	unsigned long val;
+
+	if (strict_strtoul(buf, 10, &val))
+		return -EINVAL;
+
+	if (val < 4096)
+		val = 1;
+	else if (val < 65536)
+		val = 2;
+	else
+		return -ERANGE;
+
+	/* Make sure nobody else reads/modifies/writes 0x81 while we
+	   are active */
+
+	mutex_lock(&data->mutex);
+
+	ret_val = i2c_smbus_read_byte_data(client, 0x81);
+	if (ret_val < 0)
+		goto fail;
+
+	/* Reset the bits before setting them */
+	ret_val = ret_val & 0xFA;
+
+	if (val == 1) /* Setting the continous measurement up to 4k LUX */
+		ret_val = (ret_val | 0x05);
+	else /* Setting the continous measurement up to 64k LUX*/
+		ret_val = (ret_val | 0x04);
+
+	ret_val = i2c_smbus_write_byte_data(client, 0x81, ret_val);
+	if (ret_val >= 0) {
+		/* All OK */
+		mutex_unlock(&data->mutex);
+		return count;
+	}
+fail:
+	mutex_unlock(&data->mutex);
+	return ret_val;
+}
+
+static ssize_t als_power_status_show(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int ret_val;
+	ret_val = i2c_smbus_read_byte_data(client, 0x80);
+	if (ret_val < 0)
+		return ret_val;
+	ret_val = ret_val & 0x01;
+	return sprintf(buf, "%d\n", ret_val);
+}
+
+static int als_set_power_state(struct i2c_client *client, bool on_off)
+{
+	int ret_val;
+	struct als_data *data = i2c_get_clientdata(client);
+
+	mutex_lock(&data->mutex);
+	ret_val = i2c_smbus_read_byte_data(client, 0x80);
+	if (ret_val < 0)
+		goto fail;
+	if (on_off)
+		ret_val = ret_val | 0x01;
+	else
+		ret_val = ret_val & 0xFE;
+	ret_val = i2c_smbus_write_byte_data(client, 0x80, ret_val);
+fail:
+	mutex_unlock(&data->mutex);
+	return ret_val;
+}
+
+static ssize_t als_power_status_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct als_data *data = i2c_get_clientdata(client);
+	unsigned long val;
+	int ret_val;
+
+	if (strict_strtoul(buf, 10, &val))
+		return -EINVAL;
+	if (val == POWER_STA_ENABLE) {
+		ret_val = als_set_power_state(client, true);
+		data->needresume = true;
+	} else if (val == POWER_STA_DISABLE) {
+		ret_val = als_set_power_state(client, false);
+		data->needresume = false;
+	} else
+		return -EINVAL;
+	if (ret_val < 0)
+		return ret_val;
+	return count;
+}
+
+static DEVICE_ATTR(lux0_sensor_range, S_IRUGO | S_IWUSR,
+	als_sensing_range_show, als_sensing_range_store);
+static DEVICE_ATTR(lux0_input, S_IRUGO, als_lux0_input_data_show, NULL);
+static DEVICE_ATTR(power_state, S_IRUGO | S_IWUSR,
+	als_power_status_show, als_power_status_store);
+
+static struct attribute *mid_att_als[] = {
+	&dev_attr_lux0_sensor_range.attr,
+	&dev_attr_lux0_input.attr,
+	&dev_attr_power_state.attr,
+	NULL
+};
+
+static struct attribute_group m_als_gr = {
+	.name = "apds9802als",
+	.attrs = mid_att_als
+};
+
+static int als_set_default_config(struct i2c_client *client)
+{
+	int ret_val;
+	/* Write the command and then switch on */
+	ret_val = i2c_smbus_write_byte_data(client, 0x80, 0x01);
+	if (ret_val < 0) {
+		dev_err(&client->dev, "failed default switch on write\n");
+		return ret_val;
+	}
+	/* Continous from 1Lux to 64k Lux */
+	ret_val = i2c_smbus_write_byte_data(client, 0x81, 0x04);
+	if (ret_val < 0)
+		dev_err(&client->dev, "failed default LUX on write\n");
+	return ret_val;
+}
+
+static int  apds9802als_probe(struct i2c_client *client,
+					const struct i2c_device_id *id)
+{
+	int res;
+	struct als_data *data;
+
+	data = kzalloc(sizeof(struct als_data), GFP_KERNEL);
+	if (data == NULL) {
+		dev_err(&client->dev, "Memory allocation failed\n");
+		return -ENOMEM;
+	}
+	i2c_set_clientdata(client, data);
+	res = sysfs_create_group(&client->dev.kobj, &m_als_gr);
+	if (res) {
+		dev_err(&client->dev, "device create file failed\n");
+		goto als_error1;
+	}
+	dev_info(&client->dev,
+		"%s apds9802als: ALS chip found\n", client->name);
+	als_set_default_config(client);
+	data->needresume = true;
+	mutex_init(&data->mutex);
+	return res;
+als_error1:
+	i2c_set_clientdata(client, NULL);
+	kfree(data);
+	return res;
+}
+
+static int apds9802als_remove(struct i2c_client *client)
+{
+	struct als_data *data = i2c_get_clientdata(client);
+	sysfs_remove_group(&client->dev.kobj, &m_als_gr);
+	kfree(data);
+	return 0;
+}
+
+static int apds9802als_suspend(struct i2c_client *client, pm_message_t mesg)
+{
+	als_set_power_state(client, false);
+	return 0;
+}
+
+static int apds9802als_resume(struct i2c_client *client)
+{
+	struct als_data *data = i2c_get_clientdata(client);
+
+	if (data->needresume == true)
+		als_set_power_state(client, true);
+	return 0;
+}
+
+static struct i2c_device_id apds9802als_id[] = {
+	{ DRIVER_NAME, 0 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(i2c, apds9802als_id);
+
+static struct i2c_driver apds9802als_driver = {
+	.driver = {
+	.name = DRIVER_NAME,
+	.owner = THIS_MODULE,
+	},
+	.probe = apds9802als_probe,
+	.remove = apds9802als_remove,
+	.suspend = apds9802als_suspend,
+	.resume = apds9802als_resume,
+	.id_table = apds9802als_id,
+};
+
+static int __init sensor_apds9802als_init(void)
+{
+	return i2c_add_driver(&apds9802als_driver);
+}
+
+static void  __exit sensor_apds9802als_exit(void)
+{
+	i2c_del_driver(&apds9802als_driver);
+}
+module_init(sensor_apds9802als_init);
+module_exit(sensor_apds9802als_exit);
+
+MODULE_AUTHOR("Anantha Narayanan <Anantha.Narayanan@intel.com");
+MODULE_DESCRIPTION("Avago apds9802als ALS Driver");
+MODULE_LICENSE("GPL v2");