mmotm 2010-10-20-15-01 uploaded

mmotm 2010-10-20-15-01 uploaded

[akpm]

The mm-of-the-moment snapshot 2010-10-20-15-01 has been uploaded to

   http://userweb.kernel.org/~akpm/mmotm/

and will soon be available at

   git://zen-kernel.org/kernel/mmotm.git

It contains the following patches against 2.6.36-rc8:

origin.patch
mm-fix-return-value-of-scan_lru_pages-in-memory-unplug.patch
typesh-move-misplaced-comment.patch
mm-page-allocator-do-not-check-the-state-of-a-non-existant-buddy-during-free.patch
um-fix-global-timer-issue-when-using-config_no_hz.patch
sgi-zp-incoming-xpc-channel-messages-can-come-in-after-the-channels-partition-structures-have-been-torn-down.patch
um-remove-page_size-alignment-in-linker-script-causing-kernel-segfault.patch
drivers-misc-ad525x_dpot-fix-typo-in-spi-write16-and-write24-transfer-counts.patch
ipmi-proper-spinlocks-initializations.patch
hostfs-fix-uml-crash-remove-f_spare-from-hostfs.patch
kfifo-disable-__kfifo_must_check_helper.patch
linux-next.patch
next-remove-localversion.patch
fs-inodec-work-around-bug.patch
arch-x86-kernel-entry_64s-fix-build-with-gas-2161.patch
arch-x86-kernel-entry_32s-i386-too.patch
i-need-old-gcc.patch
arch-alpha-kernel-systblss-remove-debug-check.patch
mm-vmap-area-cache.patch
arch-arm-plat-omap-iovmmc-fix-end-address-of-vm-area-comparation-in-alloc_iovm_area.patch
audit-call-tty_audit_push_task-outside-preempt-disabled.patch
audit-do-not-send-uninitialized-data-for-audit_tty_get.patch
audit-use-rcu-for-task-lookup-protection.patch
backlight-fix-88pm860x_bl-macro-collision.patch
cciss-fix-botched-tag-masking-for-scsi-tape-commands.patch
cciss-fix-pci-ids-for-new-smart-array-controllers.patch
arch-mips-include-asm-fcntlh-needs-typesh.patch
time-compensate-for-rounding-on-odd-frequency-clocksources.patch
x86-enable-arch_dma_addr_t_64bit-with-x86_64-highmem64g.patch
x86-fake-numa-assign-cpus-to-nodes-in-round-robin-manner.patch
drivers-char-agp-parisc-agpc-eliminate-memory-leak.patch
audit-add-support-to-match-lsm-labels-on-user-audit-messages.patch
fs-btrfs-use-memdup_user.patch
fs-btrfs-use-err_cast.patch
gcc-46-btrfs-clean-up-unused-variables-bugs.patch
gcc-46-btrfs-clean-up-unused-variables-nonbugs.patch
btrfs-only-bug_on-when-the-errno-is-not-enoent.patch
fs-btrfs-inodec-eliminate-memory-leak.patch
btrfs-dont-dereference-extent_mapping-if-null.patch
powerpc-enable-arch_dma_addr_t_64bit-with-arch_phys_addr_t_64bit.patch
drivers-gpu-drm-radeon-atomc-fix-warning.patch
fs-notify-fanotify-fanotify_userc-fix-warnings.patch
fsnotify-remove-alignment-padding-from-fsnotify_mark-on-64-bit-builds.patch
softirq-improve-preempt-count-error-message.patch
softirq-cleanup-preempt-check.patch
tile-enable-arch_dma_addr_t_64bit.patch
timer_list-remove-alignment-padding-on-64-bit-when-config_timer_stats.patch
timer-initialize-the-field-slack-of-timer_list.patch
kernel-time-use-array_size-macro-in-timecomparec.patch
timer-make-try_to_del_timer_sync-safe-on-both-hardirq-context-and-up.patch
timer-del_timer_sync-can-be-used-in-softirq-context.patch
timer-warn-when-del_timer_sync-used-in-hardirq-context.patch
timer-permit-statically-declared-work-with-deferrable-timers.patch
posix-timers-annotate-lock_timer.patch
scripts-namespacepl-fix-wrong-source-path.patch
scripts-namespacepl-update-file-exclusion-list.patch
scripts-namespacepl-some-bug-fixes.patch
scripts-namespacepl-improve-to-get-more-correct-results.patch
scripts-namespacepl-add-source-file-location-exceptions.patch
leds-route-kbd-leds-through-the-generic-leds-layer.patch
led-class-always-implement-blinking.patch
leds-driver-for-national-semiconductor-lp5521-chip.patch
leds-driver-for-national-semiconductors-lp5523-chip.patch
leds-update-lp552x-support-kconfig-and-makefile.patch
documentation-led-drivers-lp5521-and-lp5523.patch
leds-add-led-trigger-for-input-subsystem-led-events.patch
leds-add-led-trigger-for-input-subsystem-led-events-checkpatch-fixes.patch
mips-enable-arch_dma_addr_t_64bit-with-highmem-64bit_phys_addr-64bit.patch
mtdpart-memory-accessor-interface-for-mtd-layer.patch
jffs2-use-cond_resched-instead-of-yield.patch
net-avoid-limits-overflow.patch
drivers-video-backlight-s6e63m0c-set-permissions-on-gamma_table-file-to-0444.patch
backlight-fix-blanking-for-lms283gf05-lcd.patch
backlight-fix-blanking-for-l4f00242t03-lcd.patch
backlight-s6e63m0-unregister-backlight-device-and-remove-sysfs-attribute-file-in-s6e63m0_remove.patch
backlight-s6e63m0-fix-section-mismatch.patch
backlight-add-low-threshold-to-pwm-backlight.patch
btusb-patch-add_apple_macbookpro62.patch
serial8250-ratelimit-too-much-work-error.patch
serial8250-ratelimit-too-much-work-error-fix.patch
serial8250-ratelimit-too-much-work-error-fix-fix.patch
s390-enable-arch_dma_addr_t_64bit-with-64bit.patch
sched-make-sched_param-argument-static-variables-in-some-sched_setscheduler-caller.patch
percpu-fix-list_head-init-bug-in-__percpu_counter_init.patch
drivers-message-fusion-mptsasc-fix-warning.patch
block-m68k-z2ram-correct-printing-of-sector_t.patch
drivers-block-aoe-aoeblkc-ratelimit-a-warning-printk.patch
drivers-usb-gadget-amd5536udcc-fix-error-path.patch
vfs-introduce-fmode_neg_offset-for-allowing-negative-f_pos.patch
vfs-remove-a-warning-on-open_fmode.patch
vfs-add-__fmode_exec.patch
vfs-fix-infinite-loop-caused-by-clone_mnt-race.patch
vfs-ignore-error-on-forced-remount.patch
vfs-fix-per-mount-read-write.patch
vfs-add-sb_force_remount_readonly-helper.patch
vfs-allow-mnt_want_write-to-sleep.patch
vfs-allow-mnt_want_write-to-sleep-fix.patch
vfs-keep-list-of-mounts-for-each-superblock.patch
vfs-protect-remounting-superblock-read-only.patch
vfs-fs_may_remount_ro-turn-unnecessary-check-into-a-warn_on.patch
vfs-mark-mounts-read-only-on-forced-remount.patch
mm.patch
vmcore-it-is-not-experimental-any-more.patch
documentation-filesystems-proctxt-improve-smaps-field-documentation.patch
mm-smaps-export-mlock-information.patch
oom-add-per-mm-oom-disable-count.patch
oom-add-per-mm-oom-disable-count-protect-oom_disable_count-with-task_lock-in-fork.patch
oom-add-per-mm-oom-disable-count-use-old_mm-for-oom_disable_count-in-exec.patch
oom-avoid-killing-a-task-if-a-thread-sharing-its-mm-cannot-be-killed.patch
oom-kill-all-threads-sharing-oom-killed-tasks-mm.patch
oom-kill-all-threads-sharing-oom-killed-tasks-mm-fix.patch
oom-kill-all-threads-sharing-oom-killed-tasks-mm-fix-fix.patch
oom-rewrite-error-handling-for-oom_adj-and-oom_score_adj-tunables.patch
oom-fix-locking-for-oom_adj-and-oom_score_adj.patch
writeback-remove-nonblocking-encountered_congestion-references.patch
include-linux-pageblock-flagsh-fix-set_pageblock_flags-macro-definiton.patch
mm-only-build-per-node-scan_unevictable-functions-when-numa-is-enabled.patch
mm-only-build-per-node-scan_unevictable-functions-when-numa-is-enabled-cleanup.patch
mm-compaction-fix-compactpagefailed-counting.patch
memory-hotplug-fix-notifiers-return-value-check.patch
memory-hotplug-unify-is_removable-and-offline-detection-code.patch
memory-hotplug-unify-is_removable-and-offline-detection-code-checkpatch-fixes.patch
vmscan-prevent-background-aging-of-anon-page-in-no-swap-system.patch
mm-mempolicy-check-return-code-of-check_range.patch
mm-add-account_page_writeback.patch
writeback-add-nr_dirtied-and-nr_written-to-proc-vmstat.patch
writeback-add-nr_dirtied-and-nr_written-to-proc-vmstat-update.patch
writeback-add-sys-devices-system-node-node-vmstat.patch
writeback-add-sys-devices-system-node-node-vmstat-update.patch
writeback-report-dirty-thresholds-in-proc-vmstat.patch
mm-fix-typo-in-mmh-when-node_not_in_page_flags.patch
vmscan-delete-dead-code.patch
tracing-vmscan-add-trace-events-for-lru-list-shrinking.patch
writeback-account-for-time-spent-congestion_waited.patch
vmscan-synchronous-lumpy-reclaim-should-not-call-congestion_wait.patch
vmscan-narrow-the-scenarios-lumpy-reclaim-uses-synchrounous-reclaim.patch
vmscan-remove-dead-code-in-shrink_inactive_list.patch
vmscan-isolated_lru_pages-stop-neighbour-search-if-neighbour-cannot-be-isolated.patch
writeback-do-not-sleep-on-the-congestion-queue-if-there-are-no-congested-bdis.patch
writeback-do-not-sleep-on-the-congestion-queue-if-there-are-no-congested-bdis-or-if-significant-congestion-is-not-being-encountered-in-the-current-zone.patch
writeback-do-not-sleep-on-the-congestion-queue-if-there-are-no-congested-bdis-or-if-significant-congestion-is-not-being-encounted-in-the-current-zone-fix.patch
writeback-remove-the-internal-5%-low-bound-on-dirty_ratio.patch
vmscantmpfs-treat-used-once-pages-on-tmpfs-as-used-once.patch
mm-strictly-nested-kmap_atomic.patch
mm-stack-based-kmap_atomic.patch
mm-stack-based-kmap_atomic-checkpatch-fixes.patch
mm-stack-based-kmap_atomic-fix.patch
mm-remove-pte_map_nested.patch
perf-x86-fix-up-kmap_atomic-type.patch
mm-highmem-documentation.patch
mm-add-a-might_sleep_if-in-dma_pool_alloc.patch
mm-remove-alignment-padding-from-anon_vma-on-some-64-bit-builds.patch
mm-filemap_fault-unique-path-for-locking-page.patch
mm-retry-page-fault-when-blocking-on-disk-transfer.patch
mm-retry-page-fault-when-blocking-on-disk-transfer-update.patch
mm-retry-page-fault-when-blocking-on-disk-transfer-update-fix.patch
x86-access_error-api-cleanup.patch
mm-remove-temporary-variable-on-generic_file_direct_write.patch
mm-add-casts-to-from-gfp_t-in-gfp_to_alloc_flags.patch
mm-wrap-get_locked_pte-using-__cond_lock.patch
mm-add-lock-release-annotation-on-do_wp_page.patch
mm-wrap-follow_pte-using-__cond_lock.patch
rmap-annotate-lock-context-change-on-page_lock_anon_vma.patch
rmap-wrap-page_check_address-using-__cond_lock.patch
rmap-make-anon_vma_free-static.patch
rmap-make-anon_vma_free-static-fix.patch
vmalloc-rename-temporary-variable-in-__insert_vmap_area.patch
vmalloc-annotate-lock-context-change-on-s_start-stop.patch
mm-declare-some-external-symbols.patch
vmstat-include-compactionh-when-config_compaction.patch
vmstat-include-compactionh-when-config_compaction-fix.patch
mm-fix-sparse-warnings-on-gfp_zone_table-bad.patch
fs-fs-writebackc-restore-lost-comment.patch
mm-memory_hotplugc-make-scan_lru_pages-static.patch
mm-add-vzalloc-and-vzalloc_node-helpers.patch
proc-swaps-support-polling.patch
proc-swaps-support-polling-fix.patch
define-madv_hugepage.patch
frv-duplicate-output_buffer-of-e03.patch
frv-duplicate-output_buffer-of-e03-checkpatch-fixes.patch
hpet-unmap-unused-i-o-space.patch
hpet-fix-unwanted-interrupt-due-to-stale-irq-status-bit.patch
hpet-fix-style-problems.patch
documentation-timers-hpet_examplec-add-supporting-info-for-hpet_example.patch
hpet-factor-timer-allocate-from-open.patch
hpet-factor-timer-allocate-from-open-fix.patch
alpha-enable-arch_dma_addr_t_64bit.patch
alpha-use-single-hae-window-on-t2-core-logic-gamma-sable.patch
uml-define-config_no_dma.patch
uml-fix-config_static_link=y-build-failure-with-newer-glibc.patch
um-migrate-from-__do_irq-to-generic_handle_irq.patch
hostfs-trivial-code-cleanup.patch
kernelh-add-minmax3-macros.patch
kernelh-add-minmax3-macros-fix.patch
replace-nested-max-min-macros-with-maxmin3-macro.patch
m68knommu-blackfin-remove-old-assembler-only-flags-bit-definitions.patch
include-linux-kernelh-add-__must_check-to-strict_strto.patch
add-the-common-dma_addr_t-typedef-to-include-linux-typesh.patch
modules-no-need-to-align-modinfo-strings.patch
use-clear_page-copy_page-in-favor-of-memset-memcpy-on-whole-pages.patch
fuse-use-clear_highpage-and-km_user0-instead-of-km_user1.patch
ihex-add-support-for-cs-ip-eip-records.patch
vfs-fix-overflow-in-direct-io-subsystem.patch
vmlinuxldsh-gather-datashared_aligned-sections-in-data_data.patch
drivers-misc-phantomc-add-missing-warning-messages-in-phantom_probe.patch
drivers-misc-ad525x_dpot-fix-part-name-typos-in-defines.patch
drivers-misc-ad525x_dpot-new-features.patch
misc-driver-for-bh1770glc-sfh7770-als-and-proximity-sensor.patch
misc-update-bh1770glc-driver-to-kconfig-and-makefile.patch
misc-driver-for-apds990x-als-and-proximity-sensors.patch
misc-update-apds990x-driver-to-kconfig-and-makefile.patch
documentation-short-descriptions-for-bh1770glc-and-apds990x-drivers.patch
init-mark-__user-address-space-on-string-literals.patch
kernel-userc-add-lock-release-annotation-on-free_user.patch
fs-allow-for-more-than-231-files.patch
stop_machine-convert-cpu-notifier-to-return-encapsulate-errno-value.patch
kernel-remove-pf_flusher.patch
misc-devices-do-not-enable-by-default.patch
printk-fixup-declaration-of-kmsg_reasons.patch
printk-add-lock-context-annotation.patch
printk-change-type-of-boot_delay-to-int.patch
printk-declare-printk_ratelimit_state-in-ratelimith.patch
printk-declare-printk_ratelimit_state-in-ratelimith-fix.patch
vsprintfc-use-default-pointer-field-size-for-null-strings.patch
vsprintfc-use-default-pointer-field-size-for-null-strings-fix.patch
lib-fix-scnprintf-if-size-is-==-0.patch
scripts-get_maintainerpl-add-git-blame-rolestats-authored-lines-information.patch
scripts-get_maintainerpl-use-correct-indentation.patch
scripts-get_maintainerpl-dont-search-maintainers-for-keywords-or-emails.patch
scripts-get_maintainerpl-add-default-git-fallback-remove-default-git.patch
scripts-get_maintainerpl-use-get_maintainerconf-from-then-home-then-scripts.patch
scripts-get_maintainerpl-add-interactive-mode.patch
scripts-get_maintainerpl-improve-interactive-ui.patch
scripts-get_maintainerpl-update-interactive-ui-improve-hg-runtime.patch
scripts-get_maintainerpl-use-case-insensitive-name-de-duplication.patch
scripts-get_maintainerpl-fix-mailmap-handling.patch
scripts-get_maintainerpl-correct-indentation-in-a-few-places.patch
scripts-get_maintainerpl-use-mailmap-in-name-deduplication-and-other-updates.patch
scripts-get_maintainerpl-dont-deduplicate-unnamed-addresses-ie-mailing-lists.patch
maintainers-fix-colibri-pxa270-file-pattern.patch
maintainers-merge-imote2-and-stargate.patch
maintainers-merge-s3c-244x-sections.patch
maintainers-merge-s3c6400-and-6410-to-64xx.patch
maintainers-remove-usb-ov511-driver.patch
maintainers-remove-usb-zc0301-driver.patch
maintainers-use-t-git-and-whitespace-trivia.patch
lib-bitmapc-use-hex_to_bin.patch
idr-fix-idr_pre_get-locking-description.patch
idr-fix-idr_pre_get-locking-description-fix.patch
lib-div64c-document-that-div64_u64-is-not-precise-on-32bit-platforms.patch
percpu_counter-add-debugobj-support.patch
lib-kconfigdebug-add-list_sort-debugging-switch.patch
lib-list_sort-test-use-more-reasonable-printk-levels.patch
lib-list_sort-test-use-generic-random32.patch
lib-list_sort-test-improve-errors-handling.patch
lib-list_sort-test-unify-test-messages.patch
lib-list_sort-test-check-element-addresses.patch
percpu_counter-use-this_cpu_ptr-instead-of-per_cpu_ptr.patch
lib-parser-cleanup-match_number.patch
drivers-mmc-host-omapc-use-resource_size.patch
drivers-mmc-host-omap_hsmmcc-use-resource_size.patch
checkpatch-fix-regressions-in-fix-handling-of-leading-spaces.patch
checkpatch-types-may-sit-on-a-line-on-their-own.patch
checkpatch-suggest-cleanpatch-and-cleanfile-when-appropriate.patch
checkpatch-ensure-we-do-not-collapse-bracketed-sections-into-constants.patch
checkpatch-handle-casts-better-fixing-false-categorisation-of-as-binary.patch
checkpatch-returning-errno-typically-should-be-negative.patch
checkpatch-add-check-for-space-after-struct-union-and-enum.patch
checkpatch-simplify-and-consolidate-missing-space-after-checks.patch
checkpatch-ensure-kconfig-help-checks-only-apply-when-we-are-adding-help.patch
checkpatch-check-for-incorrect-permissions.patch
checkpatch-add-additional-attribute-defines.patch
checkpatch-update-copyright-dates.patch
checkpatch-clean-up-structure-definition-macro-handline.patch
checkpatch-handle-export_symbol-for-device_attr-and-similar.patch
checkpatch-statement-block-context-analyser-should-look-at-sanitised-lines.patch
checkpatch-version-031.patch
scripts-checkpatchpl-add-warnings-for-static-char-that-could-be-static-const-char.patch
select-rename-estimate_accuracy-to-select_estimate_accuracy.patch
epoll-make-epoll_wait-use-the-hrtimer-range-feature.patch
dmi-log-board-system-and-bios-information-v2.patch
drivers-char-vt_ioctlc-fix-vt_openqry-error-value.patch
vcs-add-poll-fasync-support-fix-fix.patch
rtc-rtc-lpc32xx-introduce-rtc-driver-for-the-lpc32xx-soc-v4.patch
rtc-bfin-shrink-optimize-interrupt-handler-a-bit.patch
rtc-bfin-add-debug-markers-to-suspend-resume-paths.patch
drivers-rtc-classc-fix-device_register-error-handling.patch
rtc-omap-let-device-wakeup-capability-be-configured-from-chip-init-logic.patch
rtc-rtc-s3c-fix-access-unit-from-byte-to-word-on-rtccon.patch
rtc-rtc-s3c-fix-access-unit-from-byte-to-word-on-rtccon-checkpatch-fixes.patch
rtc-rtc-s3c-fix-setting-missing-field-of-getalarm.patch
rtc-rtc-s3c-fix-on-support-rtc-alarm.patch
rtc-rtc-s3c-fix-debug-message-format-on-rtc.patch
rtc-rtc-s3c-fix-rtc-initialization-method.patch
rtc-rtc-s3c-add-rtc_valid_tm-in-s3c_rtc_gettime.patch
gpio-add-driver-for-basic-memory-mapped-gpio-controllers.patch
gpio-add-driver-for-basic-memory-mapped-gpio-controllers-fix.patch
gpiolib-fix-have_gpio_lib-leftovers-in-asm-generic-gpioh.patch
gpio-timbgpio-use-a-copy-of-the-ier-register-to-avoid-it-being-trashed.patch
gpio-add-support-for-74x164-serial-in-parallel-out-8-bit-shift-register.patch
gpio-add-support-for-74x164-serial-in-parallel-out-8-bit-shift-register-fix.patch
gpio-adp5588-gpio-support-interrupt-controller.patch
gpio-adp5588-gpio-support-interrupt-controller-update.patch
gpio-adp5588-gpio-gpio_start-must-be-signed.patch
drivers-video-matrox-matroxfb_dac1064c-remove-undead-ifdef-config_fb_matrox_g.patch
savagefb-fix-ddc-for-savage-4.patch
drivers-video-matrox-matroxfb_mavenc-fix-unsigned-return-type.patch
fbmem-ix-whitespace.patch
cyber2000fb-avoid-palette-corruption-at-higher-clocks.patch
fbmem-fix-fb_read-fb_write-unaligned-accesses.patch
drivers-video-gbefbc-eliminate-memory-leak.patch
jbd-remove-dependency-on-__gfp_nofail.patch
isofs-work-around-for-rock-ridgejoliet-cds-with-empty-iso-root-directory.patch
isofs-fix-isofs_get_blocks-for-8tb-files.patch
hfsplus-identify-journal-info-block-in-volume-header.patch
hfsplus-fix-journal-detection.patch
doc-clarify-the-behaviour-of-dirty_ratio-dirty_bytes.patch
cgroup_freezer-unnecessary-test-in-cgroup_freezing_or_frozen.patch
cgroup_freezer-fix-can_attach-to-prohibit-moving-from-to-freezing-frozen-cgroups.patch
cgroup_freezer-update_freezer_state-does-incorrect-state-transitions.patch
cgroup_freezer-update_freezer_state-does-incorrect-state-transitions-checkpatch-fixes.patch
cgroup-add-clone_children-control-file.patch
cgroup-make-the-mount-options-parsing-more-accurate.patch
cgroups-add-check-for-strcpy-destination-string-overflow.patch
cgroup-notify-ns_cgroup-deprecated.patch
memcg-fix-race-in-file_mapped-accouting-flag-management.patch
memcg-avoid-lock-in-updating-file_mapped-was-fix-race-in-file_mapped-accouting-flag-management.patch
memcg-use-for_each_mem_cgroup.patch
memcg-cpu-hotplug-aware-percpu-count-updates.patch
memcg-cpu-hotplug-aware-percpu-count-updates-fix.patch
memcg-cpu-hotplug-aware-quick-acount_move-detection.patch
memcg-cpu-hotplug-aware-quick-acount_move-detection-checkpatch-fixes.patch
memcg-generic-filestat-update-interface.patch
ptrace-annotate-lock-context-change-on-exit_ptrace.patch
ptrace-change-signature-of-sys_ptrace-and-friends.patch
ptrace-cleanup-ptrace_request.patch
ptrace-change-signature-of-arch_ptrace.patch
ptrace-cleanup-arch_ptrace-on-x86.patch
ptrace-cleanup-arch_ptrace-on-arm.patch
ptrace-cleanup-arch_ptrace-on-avr32.patch
ptrace-cleanup-arch_ptrace-and-friends-on-blackfin.patch
ptrace-cleanup-arch_ptrace-on-cris.patch
ptrace-cleanup-arch_ptrace-on-frv.patch
ptrace-cleanup-arch_ptrace-on-h8300.patch
ptrace-cleanup-arch_ptrace-on-m32r.patch
ptrace-cleanup-arch_ptrace-on-m68k.patch
ptrace-cleanup-arch_ptrace-on-m68knommu.patch
ptrace-cleanup-arch_ptrace-on-microblaze.patch
ptrace-cleanup-arch_ptrace-on-mips.patch
ptrace-cleanup-arch_ptrace-on-mn10300.patch
ptrace-cleanup-arch_ptrace-on-parisc.patch
ptrace-cleanup-arch_ptrace-on-powerpc.patch
ptrace-cleanup-arch_ptrace-on-score.patch
ptrace-cleanup-arch_ptrace-on-sh.patch
ptrace-cleanup-arch_ptrace-on-sparc.patch
ptrace-cleanup-arch_ptrace-on-tile.patch
ptrace-cleanup-arch_ptrace-on-um.patch
ptrace-cleanup-arch_ptrace-on-xtensa.patch
signals-annotate-lock_task_sighand.patch
signals-annotate-lock-context-change-on-ptrace_stop.patch
core_pattern-fix-long-parameters-was-truncated-by-core_pattern-handler.patch
core_pattern-fix-long-parameters-was-truncated-by-core_pattern-handler-update.patch
core_pattern-fix-long-parameters-was-truncated-by-core_pattern-handler-update-2.patch
core_pattern-fix-long-parameters-was-truncated-by-core_pattern-handler-update-2-checkpatch-fixes.patch
default-config_core_dump_default_elf_headers=y.patch
exit-add-lock-context-annotation-on-find_new_reaper.patch
proc-pid-smaps-export-amount-of-anonymous-memory-in-a-mapping.patch
proc-pid-smaps-export-amount-of-anonymous-memory-in-a-mapping-doc.patch
proc-pid-pagemap-document-in-documentation-filesystems-proctxt.patch
procfs-fix-proc-softirqs-formatting.patch
exec-dont-turn-pf_kthread-off-when-a-target-command-was-not-found.patch
ipc-shmc-add-rss-and-swap-size-information-to-proc-sysvipc-shm.patch
ipc-shmc-add-rss-and-swap-size-information-to-proc-sysvipc-shm-v2.patch
ipc-initialize-structure-memory-to-zero-for-compat-functions.patch
ipmi-fix-__init-and-__exit-attribute-locations.patch
rocket-release_region-or-error-path.patch
drivers-char-hvc_consolec-remove-unneeded-__set_current_statetask_running.patch
sgi-altix-ia64-mmtimer-eliminate-long-interval-timer-holdoffs.patch
sgi-altix-ia64-mmtimer-eliminate-long-interval-timer-holdoffs-update.patch
hvc_console-fix-dropping-of-characters-when-output-byte-channel-is-full.patch
rapidio-fix-rapidio-sysfs-hierarchy.patch
rapidio-powerpc-85xx-modify-rio-port-write-interrupt-handler.patch
rapidio-use-stored-ingress-port-number-instead-of-register-read.patch
rapidio-add-relation-links-between-rio-device-structures.patch
rapidio-add-default-handler-for-error-stopped-state.patch
rapidio-modify-sysfs-initialization-for-switches.patch
rapidio-add-handling-of-orphan-port-write-message.patch
rapidio-add-device-access-check-into-the-enumeration.patch
rapidio-add-support-for-idt-cps-gen2-switches.patch
rapidio-add-handling-of-redundant-routes.patch
rapidio-fix-idle2-bits-corruption.patch
rapidio-fix-maximum-port-number-in-tsi57x-em-initialization.patch
rapidio-fix-destructive-port-em-initialization-for-tsi568.patch
namespaces-remove-pid_ns-and-net_ns-experimental-status.patch
namespaces-default-all-the-namespaces-to-yes-when-config_namespaces-is-selected.patch
fs-execc-provide-the-correct-process-pid-to-the-pipe-helper.patch
delay-accounting-re-implement-c-for-getdelaysc-to-report-information-on-a-target-command.patch
delay-accounting-re-implement-c-for-getdelaysc-to-report-information-on-a-target-command-checkpatch-fixes.patch
delayacct-align-to-8-byte-boundary-on-64-bit-systems.patch
taskstats-separate-taskstats-commands.patch
taskstats-split-fill_pid-function.patch
taskstats-use-real-microsecond-granularity-for-cpu-times.patch
fuse-use-release_pages.patch
sparc-remove-dma64_addr_t-usage.patch
mips-remove-dma64_addr_t-usage.patch
alpha-remove-dma64_addr_t-usage.patch
remove-dma64_addr_t.patch
affs-testing-the-wrong-variable.patch
pps-trivial-fixes.patch
pps-declare-variables-where-they-are-used-in-switch.patch
pps-fix-race-in-pps_fetch-handler.patch
pps-unify-timestamp-gathering.patch
pps-access-pps-device-by-direct-pointer.patch
pps-convert-printk-pr_-to-dev_.patch
pps-move-idr-stuff-to-ppsc.patch
pps-add-async-pps-event-handler.patch
pps-add-async-pps-event-handler-fix.patch
pps-dont-disable-interrupts-when-using-spin-locks.patch
pps-use-bug_on-for-kernel-api-safety-checks.patch
pps-simplify-conditions-a-bit.patch
ntp-add-hardpps-implementation.patch
pps-capture-monotonic_raw-timestamps-as-well.patch
pps-add-kernel-consumer-support.patch
pps-add-parallel-port-pps-client.patch
pps-add-parallel-port-pps-signal-generator.patch
memstick-a-few-changes-to-core.patch
memstick-add-support-for-legacy-memorysticks.patch
memstick-add-driver-for-ricoh-r5c592-card-reader.patch
memstick-add-driver-for-ricoh-r5c592-card-reader-fix.patch
memstick-core-fix-device_register-error-handling.patch
w1-dont-allow-arbitrary-users-to-remove-w1-devices.patch
aio-bump-i_count-instead-of-using-igrab.patch
kfifo-fix-kfifo_alloc-to-return-a-signed-int-value.patch
kernel-resourcec-handle-reinsertion-of-an-already-inserted-resource.patch
ramoops-use-the-platform-data-structure-instead-of-module-params.patch
ramoops-use-the-platform-data-structure-instead-of-module-params-fix.patch
make-sure-nobodys-leaking-resources.patch
journal_add_journal_head-debug.patch
releasing-resources-with-children.patch
make-frame_pointer-default=y.patch
mutex-subsystem-synchro-test-module.patch
mutex-subsystem-synchro-test-module-add-missing-header-file.patch
slab-leaks3-default-y.patch
put_bh-debug.patch
add-debugging-aid-for-memory-initialisation-problems.patch
workaround-for-a-pci-restoring-bug.patch
prio_tree-debugging-patch.patch
single_open-seq_release-leak-diagnostics.patch
add-a-refcount-check-in-dput.patch
getblk-handle-2tb-devices.patch
memblock-add-input-size-checking-to-memblock_find_region.patch
memblock-add-input-size-checking-to-memblock_find_region-fix.patch

Re: mmotm 2010-10-20-15-01 uploaded

[Li Zefan]

akpm@linux-foundation.org wrote:
> The mm-of-the-moment snapshot 2010-10-20-15-01 has been uploaded to
> 
>    http://userweb.kernel.org/~akpm/mmotm/
> 
> and will soon be available at
> 
>    git://zen-kernel.org/kernel/mmotm.git
> 
> It contains the following patches against 2.6.36-rc8:
> 

Got this:

arch/x86/pci/xen.c: In function 'pci_xen_init':
arch/x86/pci/xen.c:138: error: 'isapnp_disable' undeclared (first use in this function)
arch/x86/pci/xen.c:138: error: (Each undeclared identifier is reported only once
arch/x86/pci/xen.c:138: error: for each function it appears in.)

# quilt patches arch/x86/pci/xen.c
linux-next.patch

Re: mmotm 2010-10-20-15-01 uploaded

[Li Zefan]

Li Zefan wrote:
> akpm@linux-foundation.org wrote:
>> The mm-of-the-moment snapshot 2010-10-20-15-01 has been uploaded to
>>
>>    http://userweb.kernel.org/~akpm/mmotm/
>>
>> and will soon be available at
>>
>>    git://zen-kernel.org/kernel/mmotm.git
>>
>> It contains the following patches against 2.6.36-rc8:
>>
> 
> Got this:
> 
> arch/x86/pci/xen.c: In function 'pci_xen_init':
> arch/x86/pci/xen.c:138: error: 'isapnp_disable' undeclared (first use in this function)
> arch/x86/pci/xen.c:138: error: (Each undeclared identifier is reported only once
> arch/x86/pci/xen.c:138: error: for each function it appears in.)
> 
> # quilt patches arch/x86/pci/xen.c
> linux-next.patch

I just commented out isapnp_disable, and after boot I saw this warning:

------------[ cut here ]------------
WARNING: at arch/x86/mm/highmem_32.c:82 __kunmap_atomic+0x80/0xd4()
Hardware name: ASPIRE AG1720
Modules linked in:
Pid: 1, comm: swapper Not tainted 2.6.36-rc8-mm1+ #1
Call Trace:
 [<c0440982>] warn_slowpath_common+0x6a/0x7f
 [<c042e6c5>] ? __kunmap_atomic+0x80/0xd4
 [<c04409ab>] warn_slowpath_null+0x14/0x18
 [<c042e6c5>] __kunmap_atomic+0x80/0xd4
 [<c04f2d1f>] zero_user_segments+0x5e/0x64
 [<c04f2e58>] simple_write_begin+0x5e/0x6c
 [<c04a6518>] generic_file_buffered_write+0xc0/0x1c5
 [<c0444f41>] ? current_fs_time+0x1b/0x1e
 [<c04a7745>] __generic_file_aio_write+0x25e/0x28f
 [<c04a77d8>] generic_file_aio_write+0x62/0xaa
 [<c04db6df>] do_sync_write+0x8f/0xca
 [<c075fc8f>] ? _raw_write_unlock_irqrestore+0x41/0x4d
 [<c074aedd>] ? kmemleak_alloc+0x59/0x78
 [<c09874f3>] ? do_name+0x10e/0x26b
 [<c04db650>] ? do_sync_write+0x0/0xca
 [<c04dbc44>] vfs_write+0x85/0xe3
 [<c04dbd40>] sys_write+0x40/0x62
 [<c098722b>] do_copy+0x24/0xbe
 [<c09870d4>] flush_buffer+0x6a/0x8a
 [<c09a84b1>] gunzip+0x267/0x2e6
 [<c0592458>] ? nofill+0x0/0x8
 [<c09a824a>] ? gunzip+0x0/0x2e6
 [<c0987b7f>] unpack_to_rootfs+0x1e0/0x2ee
 [<c098706a>] ? flush_buffer+0x0/0x8a
 [<c0986e93>] ? error+0x0/0x13
 [<c0987cd9>] populate_rootfs+0x4c/0x200
 [<c05a944e>] ? pci_get_subsys+0x4d/0x59
 [<c075da14>] ? printk+0x14/0x18
 [<c09aa16f>] ? pci_apply_final_quirks+0xc9/0xe6
 [<c0403080>] do_one_initcall+0x76/0x126
 [<c0987c8d>] ? populate_rootfs+0x0/0x200
 [<c098539e>] kernel_init+0x126/0x1a2
 [<c0985278>] ? kernel_init+0x0/0x1a2
 [<c0409942>] kernel_thread_helper+0x6/0x10
---[ end trace e93713a9d40cd06c ]---

Re: mmotm 2010-10-20-15-01 uploaded

[Konrad Rzeszutek Wilk]

On Thu, Oct 21, 2010 at 11:15:55AM +0800, Li Zefan wrote:
> Li Zefan wrote:
> > akpm@linux-foundation.org wrote:
> >> The mm-of-the-moment snapshot 2010-10-20-15-01 has been uploaded to
> >>
> >>    http://userweb.kernel.org/~akpm/mmotm/
> >>
> >> and will soon be available at
> >>
> >>    git://zen-kernel.org/kernel/mmotm.git
> >>
> >> It contains the following patches against 2.6.36-rc8:
> >>
> > 
> > Got this:
> > 
> > arch/x86/pci/xen.c: In function 'pci_xen_init':
> > arch/x86/pci/xen.c:138: error: 'isapnp_disable' undeclared (first use in this function)
> > arch/x86/pci/xen.c:138: error: (Each undeclared identifier is reported only once
> > arch/x86/pci/xen.c:138: error: for each function it appears in.)

Ok. Will fix this.
> > 
> > # quilt patches arch/x86/pci/xen.c
> > linux-next.patch
> 
> I just commented out isapnp_disable, and after boot I saw this warning:

Under what conditions? Is this a baremetal bootup? What is your .config?
> 
> ------------[ cut here ]------------
> WARNING: at arch/x86/mm/highmem_32.c:82 __kunmap_atomic+0x80/0xd4()
> Hardware name: ASPIRE AG1720
> Modules linked in:
> Pid: 1, comm: swapper Not tainted 2.6.36-rc8-mm1+ #1
> Call Trace:
>  [<c0440982>] warn_slowpath_common+0x6a/0x7f
>  [<c042e6c5>] ? __kunmap_atomic+0x80/0xd4
>  [<c04409ab>] warn_slowpath_null+0x14/0x18
>  [<c042e6c5>] __kunmap_atomic+0x80/0xd4
>  [<c04f2d1f>] zero_user_segments+0x5e/0x64
>  [<c04f2e58>] simple_write_begin+0x5e/0x6c
>  [<c04a6518>] generic_file_buffered_write+0xc0/0x1c5
>  [<c0444f41>] ? current_fs_time+0x1b/0x1e
>  [<c04a7745>] __generic_file_aio_write+0x25e/0x28f
>  [<c04a77d8>] generic_file_aio_write+0x62/0xaa
>  [<c04db6df>] do_sync_write+0x8f/0xca
>  [<c075fc8f>] ? _raw_write_unlock_irqrestore+0x41/0x4d
>  [<c074aedd>] ? kmemleak_alloc+0x59/0x78
>  [<c09874f3>] ? do_name+0x10e/0x26b
>  [<c04db650>] ? do_sync_write+0x0/0xca
>  [<c04dbc44>] vfs_write+0x85/0xe3
>  [<c04dbd40>] sys_write+0x40/0x62
>  [<c098722b>] do_copy+0x24/0xbe
>  [<c09870d4>] flush_buffer+0x6a/0x8a
>  [<c09a84b1>] gunzip+0x267/0x2e6
>  [<c0592458>] ? nofill+0x0/0x8
>  [<c09a824a>] ? gunzip+0x0/0x2e6
>  [<c0987b7f>] unpack_to_rootfs+0x1e0/0x2ee
>  [<c098706a>] ? flush_buffer+0x0/0x8a
>  [<c0986e93>] ? error+0x0/0x13
>  [<c0987cd9>] populate_rootfs+0x4c/0x200
>  [<c05a944e>] ? pci_get_subsys+0x4d/0x59
>  [<c075da14>] ? printk+0x14/0x18
>  [<c09aa16f>] ? pci_apply_final_quirks+0xc9/0xe6
>  [<c0403080>] do_one_initcall+0x76/0x126
>  [<c0987c8d>] ? populate_rootfs+0x0/0x200
>  [<c098539e>] kernel_init+0x126/0x1a2
>  [<c0985278>] ? kernel_init+0x0/0x1a2
>  [<c0409942>] kernel_thread_helper+0x6/0x10
> ---[ end trace e93713a9d40cd06c ]---
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/

Re: mmotm 2010-10-20-15-01 uploaded

[Li Zefan]

[-- Attachment #1: Type: text/plain, Size: 3159 bytes --]

于 2010年10月21日 11:38, Konrad Rzeszutek Wilk 写道:
> On Thu, Oct 21, 2010 at 11:15:55AM +0800, Li Zefan wrote:
>> Li Zefan wrote:
>>> akpm@linux-foundation.org wrote:
>>>> The mm-of-the-moment snapshot 2010-10-20-15-01 has been uploaded to
>>>>
>>>>    http://userweb.kernel.org/~akpm/mmotm/
>>>>
>>>> and will soon be available at
>>>>
>>>>    git://zen-kernel.org/kernel/mmotm.git
>>>>
>>>> It contains the following patches against 2.6.36-rc8:
>>>>
>>> Got this:
>>>
>>> arch/x86/pci/xen.c: In function 'pci_xen_init':
>>> arch/x86/pci/xen.c:138: error: 'isapnp_disable' undeclared (first use in this function)
>>> arch/x86/pci/xen.c:138: error: (Each undeclared identifier is reported only once
>>> arch/x86/pci/xen.c:138: error: for each function it appears in.)
> 
> Ok. Will fix this.
>>> # quilt patches arch/x86/pci/xen.c
>>> linux-next.patch
>> I just commented out isapnp_disable, and after boot I saw this warning:
> 
> Under what conditions? Is this a baremetal bootup? What is your .config?

It just showed up during boot.

Config attached.

>> ------------[ cut here ]------------
>> WARNING: at arch/x86/mm/highmem_32.c:82 __kunmap_atomic+0x80/0xd4()
>> Hardware name: ASPIRE AG1720
>> Modules linked in:
>> Pid: 1, comm: swapper Not tainted 2.6.36-rc8-mm1+ #1
>> Call Trace:
>>  [<c0440982>] warn_slowpath_common+0x6a/0x7f
>>  [<c042e6c5>] ? __kunmap_atomic+0x80/0xd4
>>  [<c04409ab>] warn_slowpath_null+0x14/0x18
>>  [<c042e6c5>] __kunmap_atomic+0x80/0xd4
>>  [<c04f2d1f>] zero_user_segments+0x5e/0x64
>>  [<c04f2e58>] simple_write_begin+0x5e/0x6c
>>  [<c04a6518>] generic_file_buffered_write+0xc0/0x1c5
>>  [<c0444f41>] ? current_fs_time+0x1b/0x1e
>>  [<c04a7745>] __generic_file_aio_write+0x25e/0x28f
>>  [<c04a77d8>] generic_file_aio_write+0x62/0xaa
>>  [<c04db6df>] do_sync_write+0x8f/0xca
>>  [<c075fc8f>] ? _raw_write_unlock_irqrestore+0x41/0x4d
>>  [<c074aedd>] ? kmemleak_alloc+0x59/0x78
>>  [<c09874f3>] ? do_name+0x10e/0x26b
>>  [<c04db650>] ? do_sync_write+0x0/0xca
>>  [<c04dbc44>] vfs_write+0x85/0xe3
>>  [<c04dbd40>] sys_write+0x40/0x62
>>  [<c098722b>] do_copy+0x24/0xbe
>>  [<c09870d4>] flush_buffer+0x6a/0x8a
>>  [<c09a84b1>] gunzip+0x267/0x2e6
>>  [<c0592458>] ? nofill+0x0/0x8
>>  [<c09a824a>] ? gunzip+0x0/0x2e6
>>  [<c0987b7f>] unpack_to_rootfs+0x1e0/0x2ee
>>  [<c098706a>] ? flush_buffer+0x0/0x8a
>>  [<c0986e93>] ? error+0x0/0x13
>>  [<c0987cd9>] populate_rootfs+0x4c/0x200
>>  [<c05a944e>] ? pci_get_subsys+0x4d/0x59
>>  [<c075da14>] ? printk+0x14/0x18
>>  [<c09aa16f>] ? pci_apply_final_quirks+0xc9/0xe6
>>  [<c0403080>] do_one_initcall+0x76/0x126
>>  [<c0987c8d>] ? populate_rootfs+0x0/0x200
>>  [<c098539e>] kernel_init+0x126/0x1a2
>>  [<c0985278>] ? kernel_init+0x0/0x1a2
>>  [<c0409942>] kernel_thread_helper+0x6/0x10
>> ---[ end trace e93713a9d40cd06c ]---
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>> Please read the FAQ at  http://www.tux.org/lkml/
> 
> 

[-- Attachment #2: myconfig --]
[-- Type: text/plain, Size: 77094 bytes --]

#
# Automatically generated make config: don't edit
# Linux/i386 2.6.36-rc8-mm1 Kernel Configuration
# Thu Oct 21 10:35:17 2010
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_GPIO=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
CONFIG_KTIME_SCALAR=y
CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
# CONFIG_AUDIT is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y

#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_GENERIC_HARDIRQS_NO_DEPRECATED is not set
CONFIG_HAVE_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
# CONFIG_AUTO_IRQ_AFFINITY is not set
# CONFIG_IRQ_PER_CPU is not set
# CONFIG_HARDIRQS_SW_RESEND is not set
# CONFIG_SPARSE_IRQ is not set

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_RCU_FAST_NO_HZ is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=m
# CONFIG_IKCONFIG_PROC is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_CGROUPS=y
CONFIG_CGROUP_DEBUG=y
# CONFIG_CGROUP_NS is not set
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
CONFIG_CGROUP_MEM_RES_CTLR=y
CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
CONFIG_MM_OWNER=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_LZO=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_PERF_COUNTERS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_OPTPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBDAF=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_INTEGRITY=y
# CONFIG_BLK_DEV_THROTTLING is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_CFQ_GROUP_IOSCHED=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
# CONFIG_INLINE_SPIN_UNLOCK is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
# CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set
# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
# CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_BIGSMP is not set
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_ELAN is not set
CONFIG_X86_MRST=y
# CONFIG_X86_RDC321X is not set
CONFIG_X86_32_NON_STANDARD=y
# CONFIG_X86_NUMAQ is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_X86_SUMMIT is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_PARAVIRT_GUEST=y
CONFIG_XEN=y
CONFIG_XEN_PVHVM=y
CONFIG_XEN_MAX_DOMAIN_MEMORY=128
CONFIG_XEN_SAVE_RESTORE=y
CONFIG_XEN_DEBUG_FS=y
CONFIG_KVM_CLOCK=y
CONFIG_KVM_GUEST=y
CONFIG_LGUEST_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_SPINLOCKS is not set
CONFIG_PARAVIRT_CLOCK=y
# CONFIG_PARAVIRT_DEBUG is not set
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
CONFIG_X86_CYCLONE_TIMER=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=7
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=5
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_APB_TIMER=y
CONFIG_DMI=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_IOMMU_API=y
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
# CONFIG_X86_ANCIENT_MCE is not set
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
CONFIG_MICROCODE=m
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
# CONFIG_NOHIGHMEM is not set
# CONFIG_HIGHMEM4G is not set
CONFIG_HIGHMEM64G=y
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_X86_PAE=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
# CONFIG_COMPACTION is not set
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
# CONFIG_HWPOISON_INJECT is not set
CONFIG_CLEANCACHE=y
CONFIG_HIGHPTE=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_EFI=y
CONFIG_SECCOMP=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
# CONFIG_KEXEC_JUMP is not set
CONFIG_PHYSICAL_START=0x400000
CONFIG_RELOCATABLE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x400000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management and ACPI options
#
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
# CONFIG_PM_VERBOSE is not set
CONFIG_CAN_PM_TRACE=y
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND_NVS=y
CONFIG_SUSPEND=y
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_RUNTIME=y
CONFIG_PM_OPS=y
# CONFIG_PM_OPP is not set
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
# CONFIG_ACPI_POWER_METER is not set
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=1999
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_APEI is not set
CONFIG_SFI=y
CONFIG_X86_APM_BOOT=y
CONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not set
CONFIG_APM_CPU_IDLE=y
# CONFIG_APM_DISPLAY_BLANK is not set
# CONFIG_APM_ALLOW_INTS is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set

#
# CPUFreq processor drivers
#
# CONFIG_X86_PCC_CPUFREQ is not set
CONFIG_X86_ACPI_CPUFREQ=m
# CONFIG_X86_POWERNOW_K6 is not set
CONFIG_X86_POWERNOW_K7=y
CONFIG_X86_POWERNOW_K7_ACPI=y
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_SPEEDSTEP_ICH=y
CONFIG_X86_SPEEDSTEP_SMI=y
# CONFIG_X86_P4_CLOCKMOD is not set
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
CONFIG_X86_LONGRUN=y
# CONFIG_X86_LONGHAUL is not set
# CONFIG_X86_E_POWERSAVER is not set

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
# CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_INTEL_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_XEN=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_DMAR=y
CONFIG_DMAR_DEFAULT_ON=y
CONFIG_DMAR_FLOPPY_WA=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
CONFIG_PCIE_ECRC=y
# CONFIG_PCIEAER_INJECT is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIE_PME=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_STUB=y
CONFIG_XEN_PCIDEV_FRONTEND=y
CONFIG_HT_IRQ=y
CONFIG_PCI_IOV=y
CONFIG_PCI_IOAPIC=y
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_OLPC is not set
CONFIG_AMD_NB=y
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
# CONFIG_YENTA is not set
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
# CONFIG_I82365 is not set
# CONFIG_TCIC is not set
CONFIG_PCMCIA_PROBE=y
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
# CONFIG_HOTPLUG_PCI_COMPAQ is not set
# CONFIG_HOTPLUG_PCI_IBM is not set
CONFIG_HOTPLUG_PCI_ACPI=y
# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
# CONFIG_VBUS_PROXY is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_IP_MROUTE=y
# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_ARPD=y
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
CONFIG_TCP_CONG_CUBIC=y
# CONFIG_TCP_CONG_WESTWOOD is not set
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_BEET is not set
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
# CONFIG_IPV6_SIT is not set
# CONFIG_IPV6_TUNNEL is not set
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
# CONFIG_IPV6_MROUTE_MULTIPLE_TABLES is not set
CONFIG_IPV6_PIMSM_V2=y
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y

#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
CONFIG_NF_CONNTRACK=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
# CONFIG_NF_CT_PROTO_DCCP is not set
# CONFIG_NF_CT_PROTO_SCTP is not set
# CONFIG_NF_CT_PROTO_UDPLITE is not set
# CONFIG_NF_CONNTRACK_AMANDA is not set
# CONFIG_NF_CONNTRACK_FTP is not set
# CONFIG_NF_CONNTRACK_H323 is not set
# CONFIG_NF_CONNTRACK_IRC is not set
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
# CONFIG_NF_CONNTRACK_PPTP is not set
# CONFIG_NF_CONNTRACK_SANE is not set
# CONFIG_NF_CONNTRACK_SIP is not set
# CONFIG_NF_CONNTRACK_TFTP is not set
# CONFIG_NF_CT_NETLINK is not set
CONFIG_NETFILTER_XTABLES=y

#
# Xtables combined modules
#
# CONFIG_NETFILTER_XT_MARK is not set
# CONFIG_NETFILTER_XT_CONNMARK is not set

#
# Xtables targets
#
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
# CONFIG_NETFILTER_XT_TARGET_CONNSECMARK is not set
# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
# CONFIG_NETFILTER_XT_TARGET_LED is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
# CONFIG_NETFILTER_XT_TARGET_TEE is not set
# CONFIG_NETFILTER_XT_TARGET_SECMARK is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set

#
# Xtables matches
#
# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
# CONFIG_NETFILTER_XT_MATCH_CPU is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
# CONFIG_NETFILTER_XT_MATCH_HL is not set
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
CONFIG_NETFILTER_XT_MATCH_STATE=y
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# CONFIG_IP_VS is not set

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_CONNTRACK_IPV4=y
# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=y
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
# CONFIG_IP_NF_MATCH_AH is not set
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_TTL is not set
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
# CONFIG_IP_NF_TARGET_LOG is not set
# CONFIG_IP_NF_TARGET_ULOG is not set
# CONFIG_NF_NAT is not set
# CONFIG_IP_NF_MANGLE is not set
# CONFIG_IP_NF_TARGET_TTL is not set
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_ARPTABLES is not set

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV6=m
# CONFIG_IP6_NF_QUEUE is not set
# CONFIG_IP6_NF_IPTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
CONFIG_NET_DSA=y
CONFIG_NET_DSA_TAG_DSA=y
CONFIG_NET_DSA_TAG_EDSA=y
CONFIG_NET_DSA_TAG_TRAILER=y
CONFIG_NET_DSA_MV88E6XXX=y
CONFIG_NET_DSA_MV88E6060=y
CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
CONFIG_NET_DSA_MV88E6131=y
CONFIG_NET_DSA_MV88E6123_61_65=y
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_INGRESS is not set

#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
# CONFIG_NET_CLS_TCINDEX is not set
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
# CONFIG_NET_EMATCH_CMP is not set
# CONFIG_NET_EMATCH_NBYTE is not set
# CONFIG_NET_EMATCH_U32 is not set
# CONFIG_NET_EMATCH_META is not set
# CONFIG_NET_EMATCH_TEXT is not set
CONFIG_NET_CLS_ACT=y
# CONFIG_NET_ACT_POLICE is not set
# CONFIG_NET_ACT_GACT is not set
# CONFIG_NET_ACT_MIRRED is not set
# CONFIG_NET_ACT_IPT is not set
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
# CONFIG_NET_ACT_SKBEDIT is not set
# CONFIG_NET_ACT_CSUM is not set
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_RPS=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
CONFIG_NET_DROP_MONITOR=y
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_PC_PCMCIA is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set

#
# Protocols
#
CONFIG_ISAPNP=y
# CONFIG_PNPBIOS is not set
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set

#
# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_XEN_BLKDEV_FRONTEND is not set
# CONFIG_VIRTIO_BLK is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RBD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_AD525X_DPOT is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_CS5535_MFGPT is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_VMWARE_BALLOON is not set
# CONFIG_BMP085 is not set
# CONFIG_PCH_PHUB is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_CB710_CORE is not set

#
# Texas Instruments shared transport line discipline
#
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_ARCMSR is not set
CONFIG_MEGARAID_NEWGEN=y
# CONFIG_MEGARAID_MM is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_VMWARE_PVSCSI is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_FCOE_FNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
# CONFIG_PCMCIA_AHA152X is not set
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_NINJA_SCSI is not set
# CONFIG_PCMCIA_QLOGIC is not set
# CONFIG_PCMCIA_SYM53C500 is not set
CONFIG_SCSI_DH=y
# CONFIG_SCSI_DH_RDAC is not set
# CONFIG_SCSI_DH_HP_SW is not set
# CONFIG_SCSI_DH_EMC is not set
# CONFIG_SCSI_DH_ALUA is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set

#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set

#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_ISAPNP is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_QDI is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_WINBOND_VLB is not set

#
# Generic fallback / legacy drivers
#
# CONFIG_PATA_ACPI is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=y
CONFIG_DM_DEBUG=y
# CONFIG_DM_CRYPT is not set
CONFIG_DM_SNAPSHOT=y
CONFIG_DM_MIRROR=y
# CONFIG_DM_LOG_USERSPACE is not set
CONFIG_DM_ZERO=y
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_FUSION=y
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
CONFIG_FUSION_MAX_SGE=40
CONFIG_FUSION_LOGGING=y

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_IFB is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
CONFIG_MII=m
CONFIG_PHYLIB=y

#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_BCM63XX_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MICREL_PHY is not set
CONFIG_FIXED_PHY=y
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
CONFIG_NET_VENDOR_3COM=y
# CONFIG_EL1 is not set
# CONFIG_EL2 is not set
# CONFIG_ELPLUS is not set
# CONFIG_EL16 is not set
# CONFIG_EL3 is not set
# CONFIG_3C515 is not set
# CONFIG_VORTEX is not set
# CONFIG_TYPHOON is not set
# CONFIG_LANCE is not set
CONFIG_NET_VENDOR_SMC=y
# CONFIG_WD80x3 is not set
# CONFIG_ULTRA is not set
# CONFIG_SMC9194 is not set
# CONFIG_ETHOC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_DNET is not set
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
# CONFIG_TULIP is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_PCMCIA_XIRCOM is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
CONFIG_NET_ISA=y
# CONFIG_E2100 is not set
# CONFIG_EWRK3 is not set
# CONFIG_EEXPRESS is not set
# CONFIG_EEXPRESS_PRO is not set
# CONFIG_HPLAN_PLUS is not set
# CONFIG_HPLAN is not set
# CONFIG_LP486E is not set
# CONFIG_ETH16I is not set
# CONFIG_NE2000 is not set
# CONFIG_ZNET is not set
# CONFIG_SEEQ8005 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_KSZ884X_PCI is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
CONFIG_NET_POCKET=y
# CONFIG_ATP is not set
# CONFIG_DE600 is not set
# CONFIG_DE620 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_STMMAC_ETH is not set
# CONFIG_PCH_GBE is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
CONFIG_CHELSIO_T4_DEPENDS=y
# CONFIG_CHELSIO_T4 is not set
CONFIG_CHELSIO_T4VF_DEPENDS=y
# CONFIG_CHELSIO_T4VF is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGBEVF is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_BNA is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
# CONFIG_WLAN is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_IPHETH is not set
CONFIG_NET_PCMCIA=y
# CONFIG_PCMCIA_3C589 is not set
# CONFIG_PCMCIA_3C574 is not set
# CONFIG_PCMCIA_FMVJ18X is not set
# CONFIG_PCMCIA_PCNET is not set
# CONFIG_PCMCIA_NMCLAN is not set
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_PCMCIA_XIRC2PS is not set
# CONFIG_PCMCIA_AXNET is not set
# CONFIG_WAN is not set

#
# CAIF transport drivers
#
# CONFIG_XEN_NETDEV_FRONTEND is not set
CONFIG_FDDI=y
# CONFIG_DEFXX is not set
# CONFIG_SKFP is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
CONFIG_NET_FC=y
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_VIRTIO_NET is not set
# CONFIG_VMXNET3 is not set
CONFIG_ISDN=y
# CONFIG_ISDN_I4L is not set
# CONFIG_ISDN_CAPI is not set
# CONFIG_ISDN_DRV_GIGASET is not set
# CONFIG_HYSDN is not set
# CONFIG_MISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_SENTELIC=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_WISTRON_BTNS is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=m
# CONFIG_INPUT_WINBOND_CIR is not set
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_ADXL34X is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_N_GSM is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_STALDRV is not set
# CONFIG_NOZOMI is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
# CONFIG_SERIAL_8250_FOURPORT is not set
# CONFIG_SERIAL_8250_ACCENT is not set
# CONFIG_SERIAL_8250_BOCA is not set
# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set
# CONFIG_SERIAL_8250_HUB6 is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MFD_HSU is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_CONSOLE_POLL=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_PRINTER is not set
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
# CONFIG_HVC_XEN is not set
CONFIG_VIRTIO_CONSOLE=y
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_INTEL is not set
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_GEODE is not set
# CONFIG_HW_RANDOM_VIA is not set
# CONFIG_HW_RANDOM_VIRTIO is not set
CONFIG_NVRAM=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_IPWIRELESS is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=8192
CONFIG_HPET=y
# CONFIG_HPET_MMAP is not set
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS=y
# CONFIG_TCG_NSC is not set
# CONFIG_TCG_ATMEL is not set
# CONFIG_TCG_INFINEON is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
# CONFIG_RAMOOPS is not set
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=m

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=m
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_ISA is not set
# CONFIG_I2C_STUB is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set

#
# PPS support
#
# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set

#
# Memory mapped GPIO expanders:
#
# CONFIG_GPIO_BASIC_MMIO is not set
# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_SCH is not set
# CONFIG_GPIO_VX855 is not set

#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_ADP5588 is not set

#
# PCI GPIO expanders:
#
# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
CONFIG_GPIO_LANGWELL=y
# CONFIG_GPIO_RDC321X is not set

#
# SPI GPIO expanders:
#

#
# AC97 GPIO expanders:
#

#
# MODULbus GPIO expanders:
#
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_BQ20Z75 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_K10TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_PKGTEMP is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_SENSORS_APPLESMC is not set

#
# ACPI drivers
#
# CONFIG_SENSORS_ATK0110 is not set
# CONFIG_SENSORS_LIS3LV02D is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_F71808E_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_SBC_FITPC2_WATCHDOG is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
CONFIG_ITCO_WDT=m
CONFIG_ITCO_VENDOR_SUPPORT=y
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_SBC7240_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83697UG_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set

#
# ISA-based Watchdog Cards
#
# CONFIG_PCWATCHDOG is not set
# CONFIG_MIXCOMWD is not set
# CONFIG_WDT is not set

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_MFD_SUPPORT=y
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_TIMBERDALE is not set
# CONFIG_LPC_SCH is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_VX855 is not set
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_DUMMY is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_REGULATOR_MAX1586 is not set
# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
# CONFIG_REGULATOR_MAX8952 is not set
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_LP3972 is not set
# CONFIG_REGULATOR_TPS65023 is not set
# CONFIG_REGULATOR_TPS6507X is not set
# CONFIG_REGULATOR_ISL6271A is not set
# CONFIG_REGULATOR_AD5398 is not set
# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_ALI=y
CONFIG_AGP_ATI=y
CONFIG_AGP_AMD=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
CONFIG_AGP_NVIDIA=y
CONFIG_AGP_SIS=y
CONFIG_AGP_SWORKS=y
CONFIG_AGP_VIA=y
CONFIG_AGP_EFFICEON=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VGA_SWITCHEROO is not set
CONFIG_DRM=m
CONFIG_DRM_KMS_HELPER=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
CONFIG_DRM_I915=m
CONFIG_DRM_I915_KMS=y
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
CONFIG_FB_GEODE=y
CONFIG_FB_GEODE_LX=y
# CONFIG_FB_GEODE_GX is not set
# CONFIG_FB_GEODE_GX1 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_XEN_FBDEV_FRONTEND is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_BACKLIGHT_PROGEAR is not set
# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_UAS is not set
# CONFIG_USB_LIBUSUAL is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_GADGET is not set

#
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_LANGWELL_OTG is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
# CONFIG_LEDS_INPUT is not set
# CONFIG_LEDS_ALIX2 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_REGULATOR is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_INTEL_SS4200 is not set
# CONFIG_LEDS_LT3593 is not set
CONFIG_LEDS_TRIGGERS=y

#
# LED Triggers
#
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_GPIO is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
# CONFIG_LEDS_TRIGGER_INPUT is not set

#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_ACCESSIBILITY=y
CONFIG_A11Y_BRAILLE_CONSOLE=y
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y

#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
# CONFIG_EDAC_DECODE_MCE is not set
# CONFIG_EDAC_MM_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set

#
# SPI RTC drivers
#

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set

#
# on-CPU RTC drivers
#
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
# CONFIG_INTEL_MID_DMAC is not set
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_TIMB_DMA is not set
# CONFIG_PCH_DMA is not set
CONFIG_AUXDISPLAY=y
# CONFIG_KS0108 is not set
# CONFIG_UIO is not set

#
# Xen driver support
#
# CONFIG_XEN_BALLOON is not set
# CONFIG_XEN_DEV_EVTCHN is not set
# CONFIG_XENFS is not set
# CONFIG_XEN_SYS_HYPERVISOR is not set
CONFIG_XEN_PLATFORM_PCI=m
CONFIG_SWIOTLB_XEN=y
CONFIG_STAGING=y
# CONFIG_STAGING_EXCLUDE_BUILD is not set
# CONFIG_ET131X is not set
# CONFIG_SLICOSS is not set
# CONFIG_USB_IP_COMMON is not set
# CONFIG_ECHO is not set
# CONFIG_COMEDI is not set
# CONFIG_ASUS_OLED is not set
# CONFIG_PANEL is not set
# CONFIG_TRANZPORT is not set
# CONFIG_POHMELFS is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_IDE_PHISON is not set
# CONFIG_DRM_VMWGFX is not set
# CONFIG_DRM_NOUVEAU is not set

#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_DRM_I2C_SIL164 is not set
# CONFIG_SPECTRA is not set
# CONFIG_FB_UDL is not set
# CONFIG_HYPERV is not set
# CONFIG_VME_BUS is not set
# CONFIG_IIO is not set
# CONFIG_ZRAM is not set
# CONFIG_BATMAN_ADV is not set
# CONFIG_FB_SM7XX is not set
# CONFIG_CRYSTALHD is not set

#
# Texas Instruments shared transport line discipline
#
# CONFIG_FB_XGI is not set
# CONFIG_SMB_FS is not set
# CONFIG_ACPI_QUICKSTART is not set
CONFIG_MACH_NO_WESTBRIDGE=y
# CONFIG_USB_ENESTORAGE is not set
# CONFIG_BCM_WIMAX is not set
# CONFIG_FT1000 is not set
# CONFIG_SND_INTEL_SST is not set

#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACER_WMI is not set
# CONFIG_ACERHDF is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_TC1100_WMI is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_EEEPC_LAPTOP is not set
# CONFIG_ACPI_WMI is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_ACPI_CMPC is not set
CONFIG_INTEL_SCU_IPC=y
# CONFIG_GPIO_INTEL_PMIC is not set
# CONFIG_RAR_REGISTER is not set
# CONFIG_INTEL_IPS is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_EFI_VARS=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
CONFIG_ISCSI_IBFT_FIND=y
# CONFIG_ISCSI_IBFT is not set

#
# File systems
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT23=y
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
CONFIG_GENERIC_ACL=y

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
CONFIG_STRIP_ASM_SYMS=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_HARDLOCKUP_DETECTOR is not set
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE=400
# CONFIG_DEBUG_KMEMLEAK_TEST is not set
# CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_BKL=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
# CONFIG_PROVE_RCU is not set
# CONFIG_SPARSE_RCU_POINTER is not set
CONFIG_LOCKDEP=y
CONFIG_LOCK_STAT=y
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_HIGHMEM=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_REDUCED is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_LIST=y
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_DEBUG_SYNCHRO_TEST is not set
CONFIG_BOOT_PRINTK_DELAY=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_LKDTM is not set
# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FTRACE_NMI_ENTER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_RING_BUFFER=y
CONFIG_FTRACE_NMI_ENTER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
CONFIG_SCHED_TRACER=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENT=y
CONFIG_DYNAMIC_FTRACE=y
# CONFIG_FUNCTION_PROFILER is not set
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
CONFIG_BUILD_DOCSRC=y
CONFIG_DYNAMIC_DEBUG=y
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_KGDB_SERIAL_CONSOLE=y
CONFIG_KGDB_TESTS=y
# CONFIG_KGDB_TESTS_ON_BOOT is not set
# CONFIG_KGDB_LOW_LEVEL_TRAP is not set
# CONFIG_KGDB_KDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
CONFIG_STRICT_DEVMEM=y
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_MRST is not set
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
CONFIG_DEBUG_RODATA_TEST=y
# CONFIG_DEBUG_NX_TEST is not set
CONFIG_DOUBLEFAULT=y
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_X86_DECODER_SELFTEST=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
CONFIG_SECURITYFS=y
# CONFIG_INTEL_TXT is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set

#
# Block modes
#
# CONFIG_CRYPTO_CBC is not set
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set

#
# Ciphers
#
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_AES_586 is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_586 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_586 is not set

#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
CONFIG_CRYPTO_LZO=m

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_GEODE is not set
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set
CONFIG_VIRTIO=y
CONFIG_VIRTIO_RING=y
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y
# CONFIG_SHM_SIGNAL is not set
# CONFIG_IOQ is not set

Re: mmotm 2010-10-20-15-01 uploaded

[Andrew Morton]

On Thu, 21 Oct 2010 11:15:55 +0800 Li Zefan <lizf@cn.fujitsu.com> wrote:

> Li Zefan wrote:
> > akpm@linux-foundation.org wrote:
> >> The mm-of-the-moment snapshot 2010-10-20-15-01 has been uploaded to
> >>
> >>    http://userweb.kernel.org/~akpm/mmotm/
> >>
> >> and will soon be available at
> >>
> >>    git://zen-kernel.org/kernel/mmotm.git
> >>
> >> It contains the following patches against 2.6.36-rc8:
> >>
> > 
> > Got this:
> > 
> > arch/x86/pci/xen.c: In function 'pci_xen_init':
> > arch/x86/pci/xen.c:138: error: 'isapnp_disable' undeclared (first use in this function)
> > arch/x86/pci/xen.c:138: error: (Each undeclared identifier is reported only once
> > arch/x86/pci/xen.c:138: error: for each function it appears in.)
> > 
> > # quilt patches arch/x86/pci/xen.c
> > linux-next.patch
> 
> I just commented out isapnp_disable, and after boot I saw this warning:
> 
> ------------[ cut here ]------------
> WARNING: at arch/x86/mm/highmem_32.c:82 __kunmap_atomic+0x80/0xd4()

		WARN_ON_ONCE(idx !=
			((vaddr - __fix_to_virt(FIX_KMAP_BEGIN)) >> PAGE_SHIFT));

> Hardware name: ASPIRE AG1720
> Modules linked in:
> Pid: 1, comm: swapper Not tainted 2.6.36-rc8-mm1+ #1
> Call Trace:
>  [<c0440982>] warn_slowpath_common+0x6a/0x7f
>  [<c042e6c5>] ? __kunmap_atomic+0x80/0xd4
>  [<c04409ab>] warn_slowpath_null+0x14/0x18
>  [<c042e6c5>] __kunmap_atomic+0x80/0xd4
>  [<c04f2d1f>] zero_user_segments+0x5e/0x64
>  [<c04f2e58>] simple_write_begin+0x5e/0x6c
>  [<c04a6518>] generic_file_buffered_write+0xc0/0x1c5
>  [<c0444f41>] ? current_fs_time+0x1b/0x1e
>  [<c04a7745>] __generic_file_aio_write+0x25e/0x28f
>  [<c04a77d8>] generic_file_aio_write+0x62/0xaa
>  [<c04db6df>] do_sync_write+0x8f/0xca
>  [<c075fc8f>] ? _raw_write_unlock_irqrestore+0x41/0x4d
>  [<c074aedd>] ? kmemleak_alloc+0x59/0x78
>  [<c09874f3>] ? do_name+0x10e/0x26b
>  [<c04db650>] ? do_sync_write+0x0/0xca
>  [<c04dbc44>] vfs_write+0x85/0xe3
>  [<c04dbd40>] sys_write+0x40/0x62
>  [<c098722b>] do_copy+0x24/0xbe
>  [<c09870d4>] flush_buffer+0x6a/0x8a
>  [<c09a84b1>] gunzip+0x267/0x2e6
>  [<c0592458>] ? nofill+0x0/0x8
>  [<c09a824a>] ? gunzip+0x0/0x2e6
>  [<c0987b7f>] unpack_to_rootfs+0x1e0/0x2ee
>  [<c098706a>] ? flush_buffer+0x0/0x8a
>  [<c0986e93>] ? error+0x0/0x13
>  [<c0987cd9>] populate_rootfs+0x4c/0x200
>  [<c05a944e>] ? pci_get_subsys+0x4d/0x59
>  [<c075da14>] ? printk+0x14/0x18
>  [<c09aa16f>] ? pci_apply_final_quirks+0xc9/0xe6
>  [<c0403080>] do_one_initcall+0x76/0x126
>  [<c0987c8d>] ? populate_rootfs+0x0/0x200
>  [<c098539e>] kernel_init+0x126/0x1a2
>  [<c0985278>] ? kernel_init+0x0/0x1a2
>  [<c0409942>] kernel_thread_helper+0x6/0x10

It would have been clearer to do

	WARN_ON_ONCE(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx))

but I don't see what's gone wrong here.  Peter?

Re: mmotm 2010-10-20-15-01 uploaded

[Peter Zijlstra]

On Wed, 2010-10-20 at 20:46 -0700, Andrew Morton wrote:
> 
> > ------------[ cut here ]------------
> > WARNING: at arch/x86/mm/highmem_32.c:82 __kunmap_atomic+0x80/0xd4()
> 
>                 WARN_ON_ONCE(idx !=
>                         ((vaddr - __fix_to_virt(FIX_KMAP_BEGIN)) >> PAGE_SHIFT));
> 
> > Hardware name: ASPIRE AG1720
> > Modules linked in:
> > Pid: 1, comm: swapper Not tainted 2.6.36-rc8-mm1+ #1
> > Call Trace:
> >  [<c0440982>] warn_slowpath_common+0x6a/0x7f
> >  [<c042e6c5>] ? __kunmap_atomic+0x80/0xd4
> >  [<c04409ab>] warn_slowpath_null+0x14/0x18
> >  [<c042e6c5>] __kunmap_atomic+0x80/0xd4
> >  [<c04f2d1f>] zero_user_segments+0x5e/0x64
> >  [<c04f2e58>] simple_write_begin+0x5e/0x6c
> >  [<c04a6518>] generic_file_buffered_write+0xc0/0x1c5

<snip>

> It would have been clearer to do
> 
>         WARN_ON_ONCE(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx))
> 
> but I don't see what's gone wrong here.  Peter?

Right, so that's the warning that the unmapped address isn't actually
the top-of-stack one.

Your version is much nicer, although I haven't looked too hard at it, I
probably got my head in a twist.

But like you, I cannot directly see what's going wrong here,
zero_user_segments() seems a simple enough function without any
kmap_atomic nesting, so I'm not at all seeing how that's going wrong.

/me goes find where you hide your mmotm patch-queue and stare at the
actual code.

Re: mmotm 2010-10-20-15-01 uploaded

[Andrew Morton]

On Thu, 21 Oct 2010 09:17:26 +0200 Peter Zijlstra <a.p.zijlstra@chello.nl> wrote:

> > It would have been clearer to do
> > 
> >         WARN_ON_ONCE(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx))
> > 
> > but I don't see what's gone wrong here.  Peter?
> 
> Right, so that's the warning that the unmapped address isn't actually
> the top-of-stack one.
> 
> Your version is much nicer, although I haven't looked too hard at it, I
> probably got my head in a twist.
> 
> But like you, I cannot directly see what's going wrong here,
> zero_user_segments() seems a simple enough function without any
> kmap_atomic nesting, so I'm not at all seeing how that's going wrong.
> 
> /me goes find where you hide your mmotm patch-queue and stare at the
> actual code.

hm, OK.  The x86 guys have been mucking with the fixmap code lately but
I don't see anything which could cause this.

btw, it's a bit sad to use KM_TYPE_NR*NR_CPUS pages of virtual address
space for kmap_atomic().  I'd expect that distros set NR_CPUS quite
large (Fedora has 256).  That's 20MB of virtual address space consumed,
I think.

And we consume it on non-highmem kernels, too...

HDA: no sound [was: mmotm 2010-10-20-15-01 uploaded]

[Jiri Slaby]

On 10/21/2010 12:01 AM, akpm@linux-foundation.org wrote:
> The mm-of-the-moment snapshot 2010-10-20-15-01 has been uploaded to

Hi, I've lost sound with my intel hda (sigmatel) in this release
(regression against mmotm 2010-10-13-17-13).

All outputs were silented at level 0 after reboot, but even after
setting them non-zero in alsamixer -D hw, no sound can be heard by:
mplayer -ao alsa:device=hw /usr/share/sounds/alsa/Front_Center.wav

I don't knwo if it's related, but aplay complains like (even if I pass
-c 2):
aplay -D hw /usr/share/sounds/alsa/Front_Center.wav
Playing WAVE '/usr/share/sounds/alsa/Front_Center.wav' : Signed 16 bit
Little Endian, Rate 48000 Hz, Mono
aplay: set_params:1065: Channels count non available


alsa-info:
http://www.alsa-project.org/db/?f=a7a09703bcc8c43386c87a984e513ce35fc91ca4

regards,
-- 
js

Re: HDA: no sound [was: mmotm 2010-10-20-15-01 uploaded]

[Takashi Iwai]

At Thu, 21 Oct 2010 09:41:08 +0200,
Jiri Slaby wrote:
> 
> On 10/21/2010 12:01 AM, akpm@linux-foundation.org wrote:
> > The mm-of-the-moment snapshot 2010-10-20-15-01 has been uploaded to
> 
> Hi, I've lost sound with my intel hda (sigmatel) in this release
> (regression against mmotm 2010-10-13-17-13).
> 
> All outputs were silented at level 0 after reboot, but even after
> setting them non-zero in alsamixer -D hw, no sound can be heard by:
> mplayer -ao alsa:device=hw /usr/share/sounds/alsa/Front_Center.wav
> 
> I don't knwo if it's related, but aplay complains like (even if I pass
> -c 2):
> aplay -D hw /usr/share/sounds/alsa/Front_Center.wav
> Playing WAVE '/usr/share/sounds/alsa/Front_Center.wav' : Signed 16 bit
> Little Endian, Rate 48000 Hz, Mono
> aplay: set_params:1065: Channels count non available

This is irrelevant.  The hardware supports only stereo streams while
you are trying to play a mono-channel stream.

> alsa-info:
> http://www.alsa-project.org/db/?f=a7a09703bcc8c43386c87a984e513ce35fc91ca4

I see the Front volume is set to zero.  Try to raise it.


Takashi

Re: HDA: no sound [was: mmotm 2010-10-20-15-01 uploaded]

[Jiri Slaby]

On 10/21/2010 09:49 AM, Takashi Iwai wrote:
> At Thu, 21 Oct 2010 09:41:08 +0200,
> Jiri Slaby wrote:
>> alsa-info:
>> http://www.alsa-project.org/db/?f=a7a09703bcc8c43386c87a984e513ce35fc91ca4
> 
> I see the Front volume is set to zero.  Try to raise it.

I set all the values to ~ 70 and then tried with pure alsa. It basically
works.

BUT, when I run pulse and it suspends the device (or whatever), all the
levels get down to 0 back again. When I raise it and run mplayer, it
gets to 0 immediately. If I raise it gets to 0 when mplayer finishes and
pulse writes 'protocol-native.c: Connection died.'. It never raises
automatically. And if I raise it during playback, nothing plays at all.

regards,
-- 
js

Re: HDA: no sound [was: mmotm 2010-10-20-15-01 uploaded]

[Takashi Iwai]

At Thu, 21 Oct 2010 09:57:16 +0200,
Jiri Slaby wrote:
> 
> On 10/21/2010 09:49 AM, Takashi Iwai wrote:
> > At Thu, 21 Oct 2010 09:41:08 +0200,
> > Jiri Slaby wrote:
> >> alsa-info:
> >> http://www.alsa-project.org/db/?f=a7a09703bcc8c43386c87a984e513ce35fc91ca4
> > 
> > I see the Front volume is set to zero.  Try to raise it.
> 
> I set all the values to ~ 70 and then tried with pure alsa. It basically
> works.
> 
> BUT, when I run pulse and it suspends the device (or whatever), all the
> levels get down to 0 back again. When I raise it and run mplayer, it
> gets to 0 immediately. If I raise it gets to 0 when mplayer finishes and
> pulse writes 'protocol-native.c: Connection died.'. It never raises
> automatically. And if I raise it during playback, nothing plays at all.

Hrm, I don't remember any so critical changes done recently in the
sound tree.  The only possibly affecting commits are:

  commit 1cc9e8f4c45999e6069f41521d9d391eeeccc3b3
    ALSA: hda - Fix codec muted after rebooting from Windows

  commit de8c85f7840e5e29629de95f5af24297fb325e0b
    ALSA: HDA: Sigmatel: work around incorrect master muting
    
Could you try to revert them?    


thanks,

Takashi

Re: mmotm 2010-10-20-15-01 uploaded

[Peter Zijlstra]

On Thu, 2010-10-21 at 00:30 -0700, Andrew Morton wrote:
> On Thu, 21 Oct 2010 09:17:26 +0200 Peter Zijlstra <a.p.zijlstra@chello.nl> wrote:
> 
> > > It would have been clearer to do
> > > 
> > >         WARN_ON_ONCE(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx))
> > > 
> > > but I don't see what's gone wrong here.  Peter?
> > 
> > Right, so that's the warning that the unmapped address isn't actually
> > the top-of-stack one.
> > 
> > Your version is much nicer, although I haven't looked too hard at it, I
> > probably got my head in a twist.
> > 
> > But like you, I cannot directly see what's going wrong here,
> > zero_user_segments() seems a simple enough function without any
> > kmap_atomic nesting, so I'm not at all seeing how that's going wrong.
> > 
> > /me goes find where you hide your mmotm patch-queue and stare at the
> > actual code.

OK, so found it, and its really rather embarrassing.. I really blotched
those x86 WARN_ON_ONCE()s, for some reason I got my brain in a twist and
messed those up big-time. All other architectures have the form you
suggested earlier.

The problem is that fixmaps are top-down, so the original warning ended
up trying to compare x with (-x) >> PAGE_SHIFT, which clearly won't
work.

The sad part is that I apparently only compile tested the debug code :/

With the warning fixed (and CONFIG_DEBUG_HIGHMEM=y) an otherwise
i386-defconfig seems to fully complete boot without warnings on a qemu
with 2048 MB of memory.

---
Subject: mm, x86: Fix stack based kmap_atomic debug warnings
From: Peter Zijlstra <a.p.zijlstra@chello.nl>
Date: Thu Oct 21 11:45:08 CEST 2010

Due to a massive brainfart I got the x86 kunmap_atomic debug code that
is supposed to avoid stack violations wrong.

Use the form all other architectures already use (which was also
independently suggested by Andrew).

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
---
 arch/x86/mm/highmem_32.c |    3 +--
 arch/x86/mm/iomap_32.c   |    3 +--
 2 files changed, 2 insertions(+), 4 deletions(-)

Index: linux-2.6/arch/x86/mm/highmem_32.c
===================================================================
--- linux-2.6.orig/arch/x86/mm/highmem_32.c
+++ linux-2.6/arch/x86/mm/highmem_32.c
@@ -78,8 +78,7 @@ void __kunmap_atomic(void *kvaddr)
 		idx = type + KM_TYPE_NR * smp_processor_id();
 
 #ifdef CONFIG_DEBUG_HIGHMEM
-		WARN_ON_ONCE(idx !=
-			((vaddr - __fix_to_virt(FIX_KMAP_BEGIN)) >> PAGE_SHIFT));
+		WARN_ON_ONCE(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx));
 #endif
 		/*
 		 * Force other mappings to Oops if they'll try to access this
Index: linux-2.6/arch/x86/mm/iomap_32.c
===================================================================
--- linux-2.6.orig/arch/x86/mm/iomap_32.c
+++ linux-2.6/arch/x86/mm/iomap_32.c
@@ -102,8 +102,7 @@ iounmap_atomic(void __iomem *kvaddr)
 		idx = type + KM_TYPE_NR * smp_processor_id();
 
 #ifdef CONFIG_DEBUG_HIGHMEM
-		WARN_ON_ONCE(idx !=
-			((vaddr - __fix_to_virt(FIX_KMAP_BEGIN)) >> PAGE_SHIFT));
+		WARN_ON_ONCE(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx));
 #endif
 		/*
 		 * Force other mappings to Oops if they'll try to access this

Re: mmotm 2010-10-20-15-01 uploaded

[Peter Zijlstra]

On Thu, 2010-10-21 at 00:30 -0700, Andrew Morton wrote:
> btw, it's a bit sad to use KM_TYPE_NR*NR_CPUS pages of virtual address
> space for kmap_atomic().  I'd expect that distros set NR_CPUS quite
> large (Fedora has 256).  That's 20MB of virtual address space consumed,
> I think.
> 
> And we consume it on non-highmem kernels, too... 

I guess its something to look at, luckily i386 kernels tend to have
small NR_CPUS and x86_64 kernels have gobs of vaddr space so its not
really a problem, but yeah would be nice to fix.

Re: mmotm 2010-10-20-15-01 uploaded

[Zimny Lech]

2010/10/21  <akpm@linux-foundation.org>:
> The mm-of-the-moment snapshot 2010-10-20-15-01 has been uploaded to

Success story:
I managed to build this kernel nine times without error.

:)

-- 
Slawa!
N.P.S.

Les fleurs du mal unfold
Comme les fleurs du mal
Dark demons of my soul
Un amour fatal

mmotm 2010-10-20 - netfilter Kconfig whinge

[Valdis.Kletnieks]

[-- Attachment #1: Type: text/plain, Size: 633 bytes --]

On Wed, 20 Oct 2010 15:01:43 PDT, akpm@linux-foundation.org said:
> The mm-of-the-moment snapshot 2010-10-20-15-01 has been uploaded to
> 
>    http://userweb.kernel.org/~akpm/mmotm/

Seen during 'make oldconfig':

      Input subsystem LEDs Trigger (LEDS_TRIGGER_INPUT) [N/m/y/?] (NEW) m
      *
      * iptables trigger is under Netfilter config (LED target)
      *
warning: (NETFILTER_XT_MATCH_REALM && NET && INET && NETFILTER && NETFILTER_XTABLES && NETFILTER_ADVANCED || NET_CLS_ROUTE4 && NET && NET_SCHED) selects NET_CLS_ROUTE which has unmet direct dependencies (NET && NET_SCHED)
#
# configuration written to .config
#




[-- Attachment #2: Type: application/pgp-signature, Size: 227 bytes --]

Re: mmotm 2010-10-20-15-01 uploaded

[Konrad Rzeszutek Wilk]

> >>> Got this:
> >>>
> >>> arch/x86/pci/xen.c: In function 'pci_xen_init':
> >>> arch/x86/pci/xen.c:138: error: 'isapnp_disable' undeclared (first use in this function)
> >>> arch/x86/pci/xen.c:138: error: (Each undeclared identifier is reported only once
> >>> arch/x86/pci/xen.c:138: error: for each function it appears in.)
> > 
> > Ok. Will fix this.
> >>> # quilt patches arch/x86/pci/xen.c
> >>> linux-next.patch
> >> I just commented out isapnp_disable, and after boot I saw this warning:

I got this patch queued up. You mentioned that commenting it out did fix
the problem, so I stuck a Tested-by tag from you on it.

>From 5bba6c56dc99ff88f79a79572e29ecf445710878 Mon Sep 17 00:00:00 2001
From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Date: Thu, 21 Oct 2010 09:36:07 -0400
Subject: [PATCH 27/27] X86/PCI: Remove the dependency on isapnp_disable.

This looks to be vestigial dependency that had never been used even
in the original code base (2.6.18) from which this driver
was up-ported. Without this fix, with the CONFIG_ISAPNP, we get this
compile failure:

arch/x86/pci/xen.c: In function 'pci_xen_init':
arch/x86/pci/xen.c:138: error: 'isapnp_disable' undeclared (first use in this function)
arch/x86/pci/xen.c:138: error: (Each undeclared identifier is reported only once
arch/x86/pci/xen.c:138: error: for each function it appears in.)

Reported-by: Li Zefan <lizf@cn.fujitsu.com>
Tested-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
---
 arch/x86/pci/xen.c |    5 -----
 1 files changed, 0 insertions(+), 5 deletions(-)

diff --git a/arch/x86/pci/xen.c b/arch/x86/pci/xen.c
index b19c873..4e37106 100644
--- a/arch/x86/pci/xen.c
+++ b/arch/x86/pci/xen.c
@@ -133,11 +133,6 @@ int __init pci_xen_init(void)
 	acpi_noirq = 1;
 #endif
 
-#ifdef CONFIG_ISAPNP
-	/* Stop isapnp from probing */
-	isapnp_disable = 1;
-#endif
-
 #ifdef CONFIG_PCI_MSI
 	x86_msi.setup_msi_irqs = xen_setup_msi_irqs;
 	x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
-- 
1.7.1

Re: HDA: no sound [was: mmotm 2010-10-20-15-01 uploaded]

[Valdis.Kletnieks]

[-- Attachment #1: Type: text/plain, Size: 1550 bytes --]

On Thu, 21 Oct 2010 09:57:16 +0200, Jiri Slaby said:
> On 10/21/2010 09:49 AM, Takashi Iwai wrote:
> > At Thu, 21 Oct 2010 09:41:08 +0200,
> > Jiri Slaby wrote:
> >> alsa-info:
> >> http://www.alsa-project.org/db/?f=a7a09703bcc8c43386c87a984e513ce35fc91ca4
> > 
> > I see the Front volume is set to zero.  Try to raise it.
> 
> I set all the values to ~ 70 and then tried with pure alsa. It basically
> works.
> 
> BUT, when I run pulse and it suspends the device (or whatever), all the
> levels get down to 0 back again. When I raise it and run mplayer, it
> gets to 0 immediately. If I raise it gets to 0 when mplayer finishes and
> pulse writes 'protocol-native.c: Connection died.'. It never raises
> automatically. And if I raise it during playback, nothing plays at all.

Seeing the same thing on a Dell Latitude E6500, so Jiri isn't hallucinating.

Didn't we have some flustercluck a while back that gave pulseaudio
similar indigestion?  Oh, here it is, it was an fsnotify botch, of all things.

commit 2069601b3f0ea38170d4b509b89f3ca0a373bdc1
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date:   Thu Aug 12 14:23:04 2010 -0700

    Revert "fsnotify: store struct file not struct path"
    
    This reverts commit 3bcf3860a4ff9bbc522820b4b765e65e4deceb3e (and the
    accompanying commit c1e5c954020e "vfs/fsnotify: fsnotify_close can delay
    the final work in fput" that was a horribly ugly hack to make it work at
    all).


Did we manage to revert the revert, or re-break this code? I haven't looked at
this at all in detail.

[-- Attachment #2: Type: application/pgp-signature, Size: 227 bytes --]

DVB: af9015 defunct [was: mmotm 2010-10-20-15-01 uploaded]

[Jiri Slaby]

On 10/21/2010 12:01 AM, akpm@linux-foundation.org wrote:
> The mm-of-the-moment snapshot 2010-10-20-15-01 has been uploaded to

Well, this release happens to be a multimedia failure :(.

I hit another regression against mmotm 2010-10-13-17-13, where
0413:6029 (DVB USB tuner) can't be inited when plugged in. Even lsusb
waits inifitely.

usb 2-6: new high speed USB device using ehci_hcd and address 5
dvb-usb: found a 'Leadtek WinFast DTV Dongle Gold' in cold state, will
try to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'
dvb-usb: found a 'Leadtek WinFast DTV Dongle Gold' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software
demuxer.
DVB: registering new adapter (Leadtek WinFast DTV Dongle Gold)
af9013: firmware version:4.95.0.0
DVB: registering adapter 1 frontend 0 (Afatech AF9013 DVB-T)...
tda18271 18-00c0: creating new instance
TDA18271HD/C2 detected @ 18-00c0
af9015: command failed:1
tda18271_write_regs: [18-00c0|M] ERROR: idx = 0x0, len = 39,
i2c_transfer returned: -1
af9015: command failed:1
tda18271_write_regs: [18-00c0|M] ERROR: idx = 0x20, len = 1,
i2c_transfer returned: -1
af9015: command failed:1
tda18271_write_regs: [18-00c0|M] ERROR: idx = 0x20, len = 1,
i2c_transfer returned: -1
af9015: command failed:1
tda18271_write_regs: [18-00c0|M] ERROR: idx = 0x20, len = 1,
i2c_transfer returned: -1
af9015: command failed:1
tda18271_write_regs: [18-00c0|M] ERROR: idx = 0x20, len = 1,
i2c_transfer returned: -1
af9015: recv bulk message failed:-71
af9015: bulk message failed:-71 (8/0)
af9013: I2C read failed reg:d417
tda18271_write_regs: [18-00c0|M] ERROR: idx = 0x5, len = 11,
i2c_transfer returned: -1
af9015: bulk message failed:-71 (8/0)
af9013: I2C read failed reg:d417
af9015: bulk message failed:-71 (9/0)
af9015: bulk message failed:-71 (8/0)
af9013: I2C read failed reg:d417
tda18271_write_regs: [18-00c0|M] ERROR: idx = 0x13, len = 1,
i2c_transfer returned: -71
af9015: bulk message failed:-71 (8/0)
af9013: I2C read failed reg:d417
af9015: bulk message failed:-71 (9/0)
af9015: bulk message failed:-71 (8/0)
af9013: I2C read failed reg:d417
tda18271_write_regs: [18-00c0|M] ERROR: idx = 0x13, len = 1,
i2c_transfer returned: -71

regards,
-- 
js

Re: HDA: no sound [was: mmotm 2010-10-20-15-01 uploaded]

[Jiri Slaby]

On 10/21/2010 05:22 PM, Valdis.Kletnieks@vt.edu wrote:
> Didn't we have some flustercluck a while back that gave pulseaudio
> similar indigestion?  Oh, here it is, it was an fsnotify botch, of all things.
> 
> commit 2069601b3f0ea38170d4b509b89f3ca0a373bdc1
> Author: Linus Torvalds <torvalds@linux-foundation.org>
> Date:   Thu Aug 12 14:23:04 2010 -0700
> 
>     Revert "fsnotify: store struct file not struct path"

Yes, I was attacked by that in the past, but I doubt that's it now.
Pulse was unable to start -- the second open of the snd device failed
which doesn't seem to happen now.

Going to switch hda intel from Y to M and play with that (revert the
patches at first).

regards,
-- 
js

Re: HDA: no sound [was: mmotm 2010-10-20-15-01 uploaded]

[Jiri Slaby]

On 10/21/2010 10:05 AM, Takashi Iwai wrote:
> At Thu, 21 Oct 2010 09:57:16 +0200,
> Jiri Slaby wrote:
>> BUT, when I run pulse and it suspends the device (or whatever), all the
>> levels get down to 0 back again. When I raise it and run mplayer, it
>> gets to 0 immediately. If I raise it gets to 0 when mplayer finishes and
>> pulse writes 'protocol-native.c: Connection died.'. It never raises
>> automatically. And if I raise it during playback, nothing plays at all.
> 
> Hrm, I don't remember any so critical changes done recently in the
> sound tree.  The only possibly affecting commits are:
> 
>   commit 1cc9e8f4c45999e6069f41521d9d391eeeccc3b3
>     ALSA: hda - Fix codec muted after rebooting from Windows
> 
>   commit de8c85f7840e5e29629de95f5af24297fb325e0b
>     ALSA: HDA: Sigmatel: work around incorrect master muting

Reverting this one helps.

thanks,
-- 
js

Re: HDA: no sound [was: mmotm 2010-10-20-15-01 uploaded]

[Takashi Iwai]

At Thu, 21 Oct 2010 20:27:01 +0200,
Jiri Slaby wrote:
> 
> On 10/21/2010 10:05 AM, Takashi Iwai wrote:
> > At Thu, 21 Oct 2010 09:57:16 +0200,
> > Jiri Slaby wrote:
> >> BUT, when I run pulse and it suspends the device (or whatever), all the
> >> levels get down to 0 back again. When I raise it and run mplayer, it
> >> gets to 0 immediately. If I raise it gets to 0 when mplayer finishes and
> >> pulse writes 'protocol-native.c: Connection died.'. It never raises
> >> automatically. And if I raise it during playback, nothing plays at all.
> > 
> > Hrm, I don't remember any so critical changes done recently in the
> > sound tree.  The only possibly affecting commits are:
> > 
> >   commit 1cc9e8f4c45999e6069f41521d9d391eeeccc3b3
> >     ALSA: hda - Fix codec muted after rebooting from Windows
> > 
> >   commit de8c85f7840e5e29629de95f5af24297fb325e0b
> >     ALSA: HDA: Sigmatel: work around incorrect master muting
> 
> Reverting this one helps.

The latter one?


Takashi

Re: HDA: no sound [was: mmotm 2010-10-20-15-01 uploaded]

[Jiri Slaby]

On 10/21/2010 09:20 PM, Takashi Iwai wrote:
> At Thu, 21 Oct 2010 20:27:01 +0200,
> Jiri Slaby wrote:
>>
>> On 10/21/2010 10:05 AM, Takashi Iwai wrote:
>>> At Thu, 21 Oct 2010 09:57:16 +0200,
>>> Jiri Slaby wrote:
>>>> BUT, when I run pulse and it suspends the device (or whatever), all the
>>>> levels get down to 0 back again. When I raise it and run mplayer, it
>>>> gets to 0 immediately. If I raise it gets to 0 when mplayer finishes and
>>>> pulse writes 'protocol-native.c: Connection died.'. It never raises
>>>> automatically. And if I raise it during playback, nothing plays at all.
>>>
>>> Hrm, I don't remember any so critical changes done recently in the
>>> sound tree.  The only possibly affecting commits are:
>>>
>>>   commit 1cc9e8f4c45999e6069f41521d9d391eeeccc3b3
>>>     ALSA: hda - Fix codec muted after rebooting from Windows
>>>
>>>   commit de8c85f7840e5e29629de95f5af24297fb325e0b
>>>     ALSA: HDA: Sigmatel: work around incorrect master muting
>>
>> Reverting this one helps.
> 
> The latter one?

Yeah. Otherwise I would write it to the former :).

-- 
js

Re: HDA: no sound [was: mmotm 2010-10-20-15-01 uploaded]

[Takashi Iwai]

At Thu, 21 Oct 2010 21:21:32 +0200,
Jiri Slaby wrote:
> 
> On 10/21/2010 09:20 PM, Takashi Iwai wrote:
> > At Thu, 21 Oct 2010 20:27:01 +0200,
> > Jiri Slaby wrote:
> >>
> >> On 10/21/2010 10:05 AM, Takashi Iwai wrote:
> >>> At Thu, 21 Oct 2010 09:57:16 +0200,
> >>> Jiri Slaby wrote:
> >>>> BUT, when I run pulse and it suspends the device (or whatever), all the
> >>>> levels get down to 0 back again. When I raise it and run mplayer, it
> >>>> gets to 0 immediately. If I raise it gets to 0 when mplayer finishes and
> >>>> pulse writes 'protocol-native.c: Connection died.'. It never raises
> >>>> automatically. And if I raise it during playback, nothing plays at all.
> >>>
> >>> Hrm, I don't remember any so critical changes done recently in the
> >>> sound tree.  The only possibly affecting commits are:
> >>>
> >>>   commit 1cc9e8f4c45999e6069f41521d9d391eeeccc3b3
> >>>     ALSA: hda - Fix codec muted after rebooting from Windows
> >>>
> >>>   commit de8c85f7840e5e29629de95f5af24297fb325e0b
> >>>     ALSA: HDA: Sigmatel: work around incorrect master muting
> >>
> >> Reverting this one helps.
> > 
> > The latter one?
> 
> Yeah. Otherwise I would write it to the former :).

Yeah, I'm just be careful now ;)


Takashi

Re: HDA: no sound [was: mmotm 2010-10-20-15-01 uploaded]

[Takashi Iwai]

At Thu, 21 Oct 2010 21:21:32 +0200,
Jiri Slaby wrote:
> 
> On 10/21/2010 09:20 PM, Takashi Iwai wrote:
> > At Thu, 21 Oct 2010 20:27:01 +0200,
> > Jiri Slaby wrote:
> >>
> >> On 10/21/2010 10:05 AM, Takashi Iwai wrote:
> >>> At Thu, 21 Oct 2010 09:57:16 +0200,
> >>> Jiri Slaby wrote:
> >>>> BUT, when I run pulse and it suspends the device (or whatever), all the
> >>>> levels get down to 0 back again. When I raise it and run mplayer, it
> >>>> gets to 0 immediately. If I raise it gets to 0 when mplayer finishes and
> >>>> pulse writes 'protocol-native.c: Connection died.'. It never raises
> >>>> automatically. And if I raise it during playback, nothing plays at all.
> >>>
> >>> Hrm, I don't remember any so critical changes done recently in the
> >>> sound tree.  The only possibly affecting commits are:
> >>>
> >>>   commit 1cc9e8f4c45999e6069f41521d9d391eeeccc3b3
> >>>     ALSA: hda - Fix codec muted after rebooting from Windows
> >>>
> >>>   commit de8c85f7840e5e29629de95f5af24297fb325e0b
> >>>     ALSA: HDA: Sigmatel: work around incorrect master muting
> >>
> >> Reverting this one helps.
> > 
> > The latter one?
> 
> Yeah. Otherwise I would write it to the former :).

This might be a user-space issue, then.

Could you try once the latest alsa-lib?  If you are using SUSE packages,
the snapshot rpms are available on OBS multimedia:audio:snapshot/alsa
repo.  (The version number of the package is still 1.0.22, but don't
care; I just forgot to change the spec file.)


thanks,

Takashi

Re: HDA: no sound [was: mmotm 2010-10-20-15-01 uploaded]

[Valdis.Kletnieks]

[-- Attachment #1: Type: text/plain, Size: 1754 bytes --]

On Thu, 21 Oct 2010 21:40:08 +0200, Takashi Iwai said:
> > >>>   commit de8c85f7840e5e29629de95f5af24297fb325e0b
> > >>>     ALSA: HDA: Sigmatel: work around incorrect master muting
> > >>
> > >> Reverting this one helps.
> > > 
> > > The latter one?
> > 
> > Yeah. Otherwise I would write it to the former :).

Confirming - reverting that one commit fixes sound on my Dell laptop as
well.

> This might be a user-space issue, then.

That would be icky, if we have to lockstep a 2.6.37 kernel upgrade to
an alsa-lib upgrade.  Stuff like udev and perf having to lockstep is
bad enough...

> Could you try once the latest alsa-lib?  If you are using SUSE packages,
> the snapshot rpms are available on OBS multimedia:audio:snapshot/alsa
> repo.  (The version number of the package is still 1.0.22, but don't
> care; I just forgot to change the spec file.

Hmm... on my laptop, Fedora Rawhide is showing:

% rpm -qi alsa-lib
Name        : alsa-lib                     Relocations: (not relocatable)
Version     : 1.0.23                            Vendor: Fedora Project
Release     : 1.fc14                        Build Date: Fri 16 Apr 2010 07:48:17 AM EDT
Install Date: Sun 18 Apr 2010 03:22:04 PM EDT      Build Host: x86-02.phx2.fedoraproject.org
Group       : System Environment/Libraries   Source RPM: alsa-lib-1.0.23-1.fc14.src.rpm
Size        : 1188301                          License: LGPLv2+
Signature   : (none)
Packager    : Fedora Project
URL         : http://www.alsa-project.org/
Summary     : The Advanced Linux Sound Architecture (ALSA) library
Description :
The Advanced Linux Sound Architecture (ALSA) provides audio and MIDI
functionality to the Linux operating system.

Is that "recent enough", or do I need to find something newer?



[-- Attachment #2: Type: application/pgp-signature, Size: 227 bytes --]

Re: HDA: no sound [was: mmotm 2010-10-20-15-01 uploaded]

[Takashi Iwai]

[Added Colin to Cc]

At Thu, 21 Oct 2010 16:29:17 -0400,
Valdis.Kletnieks@vt.edu wrote:
> 
> On Thu, 21 Oct 2010 21:40:08 +0200, Takashi Iwai said:
> > > >>>   commit de8c85f7840e5e29629de95f5af24297fb325e0b
> > > >>>     ALSA: HDA: Sigmatel: work around incorrect master muting
> > > >>
> > > >> Reverting this one helps.
> > > > 
> > > > The latter one?
> > > 
> > > Yeah. Otherwise I would write it to the former :).
> 
> Confirming - reverting that one commit fixes sound on my Dell laptop as
> well.
> 
> > This might be a user-space issue, then.
> 
> That would be icky, if we have to lockstep a 2.6.37 kernel upgrade to
> an alsa-lib upgrade.  Stuff like udev and perf having to lockstep is
> bad enough...

Yeah, if this is really the culprit, we should think of reverting the
commit, at least until the use-space fix is more populated.

> > Could you try once the latest alsa-lib?  If you are using SUSE packages,
> > the snapshot rpms are available on OBS multimedia:audio:snapshot/alsa
> > repo.  (The version number of the package is still 1.0.22, but don't
> > care; I just forgot to change the spec file.
> 
> Hmm... on my laptop, Fedora Rawhide is showing:
> 
> % rpm -qi alsa-lib
> Name        : alsa-lib                     Relocations: (not relocatable)
> Version     : 1.0.23                            Vendor: Fedora Project
> Release     : 1.fc14                        Build Date: Fri 16 Apr 2010 07:48:17 AM EDT
> Install Date: Sun 18 Apr 2010 03:22:04 PM EDT      Build Host: x86-02.phx2.fedoraproject.org
> Group       : System Environment/Libraries   Source RPM: alsa-lib-1.0.23-1.fc14.src.rpm
> Size        : 1188301                          License: LGPLv2+
> Signature   : (none)
> Packager    : Fedora Project
> URL         : http://www.alsa-project.org/
> Summary     : The Advanced Linux Sound Architecture (ALSA) library
> Description :
> The Advanced Linux Sound Architecture (ALSA) provides audio and MIDI
> functionality to the Linux operating system.
> 
> Is that "recent enough", or do I need to find something newer?

Well, this doesn't tell much...
The fix patch for alsa-lib is pretty recent.  Attached below.


thanks,

Takashi

---
commit 2f6206da0c1ff88235e6eca0077343f22a4b43ee
Author: Clemens Ladisch <clemens@ladisch.de>
Date:   Fri Oct 15 10:33:20 2010 +0200

    tlv: fix returned dB information for min-is-mute controls
    
    For TLV information that indicates that the minimum value is actually
    muted, the returned range used the wrong minimum dB value, and
    converting dB values to raw control values did not round up correctly
    near the minimum.
    
    Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
    Signed-off-by: Takashi Iwai <tiwai@suse.de>

diff --git a/src/control/tlv.c b/src/control/tlv.c
index ba52752..f7c9976 100644
--- a/src/control/tlv.c
+++ b/src/control/tlv.c
@@ -167,17 +167,23 @@ int snd_tlv_get_dB_range(unsigned int *tlv, long rangemin, long rangemax,
 	}
 	case SND_CTL_TLVT_DB_SCALE: {
 		int step;
-		*min = (int)tlv[2];
+		if (tlv[3] & 0x10000)
+			*min = SND_CTL_TLV_DB_GAIN_MUTE;
+		else
+			*min = (int)tlv[2];
 		step = (tlv[3] & 0xffff);
-		*max = *min + (long)(step * (rangemax - rangemin));
+		*max = (int)tlv[2] + step * (rangemax - rangemin);
 		return 0;
 	}
 	case SND_CTL_TLVT_DB_MINMAX:
-	case SND_CTL_TLVT_DB_MINMAX_MUTE:
 	case SND_CTL_TLVT_DB_LINEAR:
 		*min = (int)tlv[2];
 		*max = (int)tlv[3];
 		return 0;
+	case SND_CTL_TLVT_DB_MINMAX_MUTE:
+		*min = SND_CTL_TLV_DB_GAIN_MUTE;
+		*max = (int)tlv[3];
+		return 0;
 	}
 	return -EINVAL;
 }
@@ -217,7 +223,7 @@ int snd_tlv_convert_to_dB(unsigned int *tlv, long rangemin, long rangemax,
 		min = tlv[2];
 		step = (tlv[3] & 0xffff);
 		mute = (tlv[3] >> 16) & 1;
-		if (mute && volume == rangemin)
+		if (mute && volume <= rangemin)
 			*db_gain = SND_CTL_TLV_DB_GAIN_MUTE;
 		else
 			*db_gain = (volume - rangemin) * step + min;
@@ -327,7 +333,11 @@ int snd_tlv_convert_from_dB(unsigned int *tlv, long rangemin, long rangemax,
 		step = (tlv[3] & 0xffff);
 		max = min + (int)(step * (rangemax - rangemin));
 		if (db_gain <= min)
-			*value = rangemin;
+			if (db_gain > SND_CTL_TLV_DB_GAIN_MUTE && xdir > 0 &&
+			    (tlv[3] & 0x10000))
+				*value = rangemin + 1;
+			else
+				*value = rangemin;
 		else if (db_gain >= max)
 			*value = rangemax;
 		else {
@@ -345,7 +355,11 @@ int snd_tlv_convert_from_dB(unsigned int *tlv, long rangemin, long rangemax,
 		min = tlv[2];
 		max = tlv[3];
 		if (db_gain <= min)
-			*value = rangemin;
+			if (db_gain > SND_CTL_TLV_DB_GAIN_MUTE && xdir > 0 &&
+			    tlv[0] == SND_CTL_TLVT_DB_MINMAX_MUTE)
+				*value = rangemin + 1;
+			else
+				*value = rangemin;
 		else if (db_gain >= max)
 			*value = rangemax;
 		else {

Re: HDA: no sound [was: mmotm 2010-10-20-15-01 uploaded]

[Valdis.Kletnieks]

[-- Attachment #1: Type: text/plain, Size: 780 bytes --]

On Thu, 21 Oct 2010 22:48:08 +0200, Takashi Iwai said:

> Yeah, if this is really the culprit, we should think of reverting the
> commit, at least until the use-space fix is more populated.

Am I allowed to NAK this commit till we get it sorted out? :)

> Well, this doesn't tell much...
> The fix patch for alsa-lib is pretty recent.  Attached below.

> commit 2f6206da0c1ff88235e6eca0077343f22a4b43ee
> Author: Clemens Ladisch <clemens@ladisch.de>
> Date:   Fri Oct 15 10:33:20 2010 +0200

That looks like a pretty self-contained patch, I should be able to build a
local test alsa-lib with that one added and see if it works with both old and
new kernels.  If I don't get a chance to do it tonight, won't be till Monday
I suspect, am booked solid with other stuff till then...


[-- Attachment #2: Type: application/pgp-signature, Size: 227 bytes --]

Re: HDA: no sound [was: mmotm 2010-10-20-15-01 uploaded]

[Takashi Iwai]

At Thu, 21 Oct 2010 17:24:24 -0400,
Valdis.Kletnieks@vt.edu wrote:
> 
> On Thu, 21 Oct 2010 22:48:08 +0200, Takashi Iwai said:
> 
> > Yeah, if this is really the culprit, we should think of reverting the
> > commit, at least until the use-space fix is more populated.
> 
> Am I allowed to NAK this commit till we get it sorted out? :)

Well, it's not confirmed whether it just triggered an alsa-lib bug
or not.  A revert is an easy option, and we can do it at any time.
But I'd like to know first what is the real problem.

> > Well, this doesn't tell much...
> > The fix patch for alsa-lib is pretty recent.  Attached below.
> 
> > commit 2f6206da0c1ff88235e6eca0077343f22a4b43ee
> > Author: Clemens Ladisch <clemens@ladisch.de>
> > Date:   Fri Oct 15 10:33:20 2010 +0200
> 
> That looks like a pretty self-contained patch, I should be able to build a
> local test alsa-lib with that one added and see if it works with both old and
> new kernels.  If I don't get a chance to do it tonight, won't be till Monday
> I suspect, am booked solid with other stuff till then...

OK.  Maybe someone else can check it meanwhile.


thanks,

Takashi

Re: HDA: no sound [was: mmotm 2010-10-20-15-01 uploaded]

[Jiri Slaby]

On 10/21/2010 11:31 PM, Takashi Iwai wrote:
> OK.  Maybe someone else can check it meanwhile.

Someone else rebooted the 13th time today and checked :):
$ rpm -q `rpmqpack |egrep 'alsa|asound'|sort`
alsa-1.0.22.git20101018-1.1.x86_64
alsa-firmware-1.0.23-3.7.noarch
alsa-oss-1.0.17-31.4.x86_64
alsa-plugins-1.0.23-4.5.x86_64
alsa-plugins-pulse-1.0.23-4.5.x86_64
alsa-plugins-pulse-32bit-1.0.23-4.5.x86_64
alsa-plugins-32bit-1.0.23-4.5.x86_64
alsa-utils-1.0.23-4.5.x86_64
libasound2-1.0.22.git20101018-1.1.x86_64
libasound2-32bit-1.0.23-6.5.x86_64

No success. I still need the revert.

regards,
-- 
js

Re: DVB: af9015 defunct [was: mmotm 2010-10-20-15-01 uploaded]

[Jiri Slaby]

On 10/21/2010 07:51 PM, Jiri Slaby wrote:
> On 10/21/2010 12:01 AM, akpm@linux-foundation.org wrote:
>> The mm-of-the-moment snapshot 2010-10-20-15-01 has been uploaded to
> 
> Well, this release happens to be a multimedia failure :(.
> 
> I hit another regression against mmotm 2010-10-13-17-13, where
> 0413:6029 (DVB USB tuner) can't be inited when plugged in. Even lsusb
> waits inifitely.

Revert of the af9015 changes doesn't seem to help.

> usb 2-6: new high speed USB device using ehci_hcd and address 5
> dvb-usb: found a 'Leadtek WinFast DTV Dongle Gold' in cold state, will
> try to load a firmware
> dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'
> dvb-usb: found a 'Leadtek WinFast DTV Dongle Gold' in warm state.
> dvb-usb: will pass the complete MPEG2 transport stream to the software
> demuxer.
> DVB: registering new adapter (Leadtek WinFast DTV Dongle Gold)
> af9013: firmware version:4.95.0.0
> DVB: registering adapter 1 frontend 0 (Afatech AF9013 DVB-T)...
> tda18271 18-00c0: creating new instance
> TDA18271HD/C2 detected @ 18-00c0
> af9015: command failed:1
> tda18271_write_regs: [18-00c0|M] ERROR: idx = 0x0, len = 39,
> i2c_transfer returned: -1
> af9015: command failed:1
> tda18271_write_regs: [18-00c0|M] ERROR: idx = 0x20, len = 1,
> i2c_transfer returned: -1
> af9015: command failed:1
> tda18271_write_regs: [18-00c0|M] ERROR: idx = 0x20, len = 1,
> i2c_transfer returned: -1
> af9015: command failed:1
> tda18271_write_regs: [18-00c0|M] ERROR: idx = 0x20, len = 1,
> i2c_transfer returned: -1
> af9015: command failed:1
> tda18271_write_regs: [18-00c0|M] ERROR: idx = 0x20, len = 1,
> i2c_transfer returned: -1
> af9015: recv bulk message failed:-71
> af9015: bulk message failed:-71 (8/0)
> af9013: I2C read failed reg:d417
> tda18271_write_regs: [18-00c0|M] ERROR: idx = 0x5, len = 11,
> i2c_transfer returned: -1
> af9015: bulk message failed:-71 (8/0)
> af9013: I2C read failed reg:d417
> af9015: bulk message failed:-71 (9/0)
> af9015: bulk message failed:-71 (8/0)
> af9013: I2C read failed reg:d417
> tda18271_write_regs: [18-00c0|M] ERROR: idx = 0x13, len = 1,
> i2c_transfer returned: -71
> af9015: bulk message failed:-71 (8/0)
> af9013: I2C read failed reg:d417
> af9015: bulk message failed:-71 (9/0)
> af9015: bulk message failed:-71 (8/0)
> af9013: I2C read failed reg:d417
> tda18271_write_regs: [18-00c0|M] ERROR: idx = 0x13, len = 1,
> i2c_transfer returned: -71
> 
> regards,


-- 
js

Re: HDA: no sound [was: mmotm 2010-10-20-15-01 uploaded]

[Colin Guthrie]

'Twas brillig, and Jiri Slaby at 21/10/10 22:42 did gyre and gimble:
> On 10/21/2010 11:31 PM, Takashi Iwai wrote:
>> OK.  Maybe someone else can check it meanwhile.
> 
> Someone else rebooted the 13th time today and checked :):
> $ rpm -q `rpmqpack |egrep 'alsa|asound'|sort`
> alsa-1.0.22.git20101018-1.1.x86_64
> alsa-firmware-1.0.23-3.7.noarch
> alsa-oss-1.0.17-31.4.x86_64
> alsa-plugins-1.0.23-4.5.x86_64
> alsa-plugins-pulse-1.0.23-4.5.x86_64
> alsa-plugins-pulse-32bit-1.0.23-4.5.x86_64
> alsa-plugins-32bit-1.0.23-4.5.x86_64
> alsa-utils-1.0.23-4.5.x86_64
> libasound2-1.0.22.git20101018-1.1.x86_64
> libasound2-32bit-1.0.23-6.5.x86_64
> 
> No success. I still need the revert.
> 
> regards,

Just tested the latest kernel patch in a "proper" (i.e. patched in
kernel) build (as opposed to my previous out-of-tree builds).

It's working great for me (stac9200)

I tried without the userspace patch and things still work fine for me
under this setup - it's just that PAs flat volumes do not properly
control the Master+PCM pipeline (they both go to mute when master hits 0).

But it doesn't seem to cause any other problems for me.

I'm no expert at the kernel side, but can't see much in the code that
would cause this.

However, from Jiri's alsa-info, this looks a bit suspicious:

Simple mixer control 'Master',0
  Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
  Playback channels: Mono
  Limits: Playback 0 - 64
  Mono: Playback 40 [62%] [1620.40dB] [on]

1620.40dB?? Really?

Is perhaps the TLV fix for min-is-mute conflicting with a db range fix?

Col


-- 

Colin Guthrie
gmane(at)colin.guthr.ie
http://colin.guthr.ie/

Day Job:
  Tribalogic Limited [http://www.tribalogic.net/]
Open Source:
  Mageia Contributor [http://www.mageia.org/]
  PulseAudio Hacker [http://www.pulseaudio.org/]
  Trac Hacker [http://trac.edgewall.org/]

Re: HDA: no sound [was: mmotm 2010-10-20-15-01 uploaded]

[Takashi Iwai]

At Fri, 22 Oct 2010 09:46:06 +0100,
Colin Guthrie wrote:
> 
> 'Twas brillig, and Jiri Slaby at 21/10/10 22:42 did gyre and gimble:
> > On 10/21/2010 11:31 PM, Takashi Iwai wrote:
> >> OK.  Maybe someone else can check it meanwhile.
> > 
> > Someone else rebooted the 13th time today and checked :):
> > $ rpm -q `rpmqpack |egrep 'alsa|asound'|sort`
> > alsa-1.0.22.git20101018-1.1.x86_64
> > alsa-firmware-1.0.23-3.7.noarch
> > alsa-oss-1.0.17-31.4.x86_64
> > alsa-plugins-1.0.23-4.5.x86_64
> > alsa-plugins-pulse-1.0.23-4.5.x86_64
> > alsa-plugins-pulse-32bit-1.0.23-4.5.x86_64
> > alsa-plugins-32bit-1.0.23-4.5.x86_64
> > alsa-utils-1.0.23-4.5.x86_64
> > libasound2-1.0.22.git20101018-1.1.x86_64
> > libasound2-32bit-1.0.23-6.5.x86_64
> > 
> > No success. I still need the revert.
> > 
> > regards,
> 
> Just tested the latest kernel patch in a "proper" (i.e. patched in
> kernel) build (as opposed to my previous out-of-tree builds).
> 
> It's working great for me (stac9200)
> 
> I tried without the userspace patch and things still work fine for me
> under this setup - it's just that PAs flat volumes do not properly
> control the Master+PCM pipeline (they both go to mute when master hits 0).

So, you mean it works without alsa-lib patch on your system?

The symptom was somehow related with the suspend or initialization.
In the early post (sorry, this wasn't cited in the mail you added to
Cc), Jiri mentioned:

  BUT, when I run pulse and it suspends the device (or whatever), all
  the levels get down to 0 back again. When I raise it and run
  mplayer, it gets to 0 immediately. If I raise it gets to 0 when
  mplayer finishes and pulse writes 'protocol-native.c: Connection
  died.'. It never raises automatically. And if I raise it during
  playback, nothing plays at all.


> But it doesn't seem to cause any other problems for me.
> 
> I'm no expert at the kernel side, but can't see much in the code that
> would cause this.
> 
> However, from Jiri's alsa-info, this looks a bit suspicious:
> 
> Simple mixer control 'Master',0
>   Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
>   Playback channels: Mono
>   Limits: Playback 0 - 64
>   Mono: Playback 40 [62%] [1620.40dB] [on]
> 
> 1620.40dB?? Really?
> 
> Is perhaps the TLV fix for min-is-mute conflicting with a db range fix?

Well, it doesn't conflict but the old alsa-lib just takes the value
as is -- i.e. the mute high bit is evaluated as a normal value.  So,
obviously it passes a wrong value for the old alsa-lib.

The above result is likely because alsa-info was generated with the
unpatched alsa-lib.  Jiri, could you regenerate alsa-info output with
the fixed alsa-lib packages?  With the fixed alsa-lib, the dB value
should be given correctly.

Anyway, judging from the fact above (giving a really wrong value), we
will have to revert the commit...


thanks,

Takashi

Re: HDA: no sound [was: mmotm 2010-10-20-15-01 uploaded]

[Jiri Slaby]

On 10/22/2010 11:02 AM, Takashi Iwai wrote:
> unpatched alsa-lib.  Jiri, could you regenerate alsa-info output with
> the fixed alsa-lib packages?  With the fixed alsa-lib, the dB value
> should be given correctly.

Sure, but I don't know which version you want, so with the patch reverted:
http://www.alsa-project.org/db/?f=4efd8e3b74a51adbd014a85052a83b4a3c5bd9fc

with the patch NOT reverted:
http://www.alsa-project.org/db/?f=e619bba74bb9ea007c2e5314761411a658ff677b

regards,
-- 
js

Re: DVB: af9015 defunct [was: mmotm 2010-10-20-15-01 uploaded]

[Jiri Slaby]

On 10/21/2010 07:51 PM, Jiri Slaby wrote:
> On 10/21/2010 12:01 AM, akpm@linux-foundation.org wrote:
>> The mm-of-the-moment snapshot 2010-10-20-15-01 has been uploaded to
> 
> Well, this release happens to be a multimedia failure :(.
> 
> I hit another regression against mmotm 2010-10-13-17-13, where
> 0413:6029 (DVB USB tuner) can't be inited when plugged in. Even lsusb
> waits inifitely.

Revert of this commit helps:

commit 99ef217e01780668ac21d600eaf4acd3f7666a02
Author: Mauro Carvalho Chehab <mchehab@redhat.com>
Date:   Sun Sep 26 22:58:28 2010 -0300

    [media] tda18271: allow restricting max out to 4 bytes

    By default, tda18271 tries to optimize I2C bus by updating all registers
    at the same time. Unfortunately, some devices doesn't support it.

    The current logic has a problem when small_i2c is equal to 8, since
there
    are some transfers using 11 + 1 bytes.

    Fix the problem by enforcing the max size at the right place, and allows
    reducing it to max = 3 + 1.

    Acked-by: Michael Krufky <mkrufky@kernellabs.com>
    Acked-by: Sri Deevi <Srinivasa.Deevi@conexant.com>
    Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

> usb 2-6: new high speed USB device using ehci_hcd and address 5
> dvb-usb: found a 'Leadtek WinFast DTV Dongle Gold' in cold state, will
> try to load a firmware
> dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'
> dvb-usb: found a 'Leadtek WinFast DTV Dongle Gold' in warm state.
> dvb-usb: will pass the complete MPEG2 transport stream to the software
> demuxer.
> DVB: registering new adapter (Leadtek WinFast DTV Dongle Gold)
> af9013: firmware version:4.95.0.0
> DVB: registering adapter 1 frontend 0 (Afatech AF9013 DVB-T)...
> tda18271 18-00c0: creating new instance
> TDA18271HD/C2 detected @ 18-00c0
> af9015: command failed:1
> tda18271_write_regs: [18-00c0|M] ERROR: idx = 0x0, len = 39,
> i2c_transfer returned: -1
> af9015: command failed:1
> tda18271_write_regs: [18-00c0|M] ERROR: idx = 0x20, len = 1,
> i2c_transfer returned: -1
> af9015: command failed:1
> tda18271_write_regs: [18-00c0|M] ERROR: idx = 0x20, len = 1,
> i2c_transfer returned: -1
> af9015: command failed:1
> tda18271_write_regs: [18-00c0|M] ERROR: idx = 0x20, len = 1,
> i2c_transfer returned: -1
> af9015: command failed:1
> tda18271_write_regs: [18-00c0|M] ERROR: idx = 0x20, len = 1,
> i2c_transfer returned: -1
> af9015: recv bulk message failed:-71
> af9015: bulk message failed:-71 (8/0)
> af9013: I2C read failed reg:d417
> tda18271_write_regs: [18-00c0|M] ERROR: idx = 0x5, len = 11,
> i2c_transfer returned: -1
> af9015: bulk message failed:-71 (8/0)
> af9013: I2C read failed reg:d417
> af9015: bulk message failed:-71 (9/0)
> af9015: bulk message failed:-71 (8/0)
> af9013: I2C read failed reg:d417
> tda18271_write_regs: [18-00c0|M] ERROR: idx = 0x13, len = 1,
> i2c_transfer returned: -71
> af9015: bulk message failed:-71 (8/0)
> af9013: I2C read failed reg:d417
> af9015: bulk message failed:-71 (9/0)
> af9015: bulk message failed:-71 (8/0)
> af9013: I2C read failed reg:d417
> tda18271_write_regs: [18-00c0|M] ERROR: idx = 0x13, len = 1,
> i2c_transfer returned: -71
> 
> regards,
-- 
js

Re: HDA: no sound [was: mmotm 2010-10-20-15-01 uploaded]

[Takashi Iwai]

At Fri, 22 Oct 2010 11:18:37 +0200,
Jiri Slaby wrote:
> 
> On 10/22/2010 11:02 AM, Takashi Iwai wrote:
> > unpatched alsa-lib.  Jiri, could you regenerate alsa-info output with
> > the fixed alsa-lib packages?  With the fixed alsa-lib, the dB value
> > should be given correctly.
> 
> Sure, but I don't know which version you want, so with the patch reverted:
> http://www.alsa-project.org/db/?f=4efd8e3b74a51adbd014a85052a83b4a3c5bd9fc
> 
> with the patch NOT reverted:
> http://www.alsa-project.org/db/?f=e619bba74bb9ea007c2e5314761411a658ff677b

Hrm, is it with alsa.rpm and libasound2.rpm from OBS
multimedia:audio:snapshot repo?

If yes, something wrong in the alsa-lib packaging...


Takashi

Re: HDA: no sound [was: mmotm 2010-10-20-15-01 uploaded]

[Colin Guthrie]

'Twas brillig, and Takashi Iwai at 22/10/10 10:02 did gyre and gimble:
> At Fri, 22 Oct 2010 09:46:06 +0100,
> Colin Guthrie wrote:
>> Just tested the latest kernel patch in a "proper" (i.e. patched in
>> kernel) build (as opposed to my previous out-of-tree builds).
>>
>> It's working great for me (stac9200)
>>
>> I tried without the userspace patch and things still work fine for me
>> under this setup - it's just that PAs flat volumes do not properly
>> control the Master+PCM pipeline (they both go to mute when master hits 0).
> 
> So, you mean it works without alsa-lib patch on your system?

Yeah everything still works OK, but the infamous "mute at 16%" issue is
obviously unresolved.

The difference with the kernel patch applied vs. not applied is that
alsamixer reports the device volume as "mute" when Master is at 0 with
the patch and it reports it as -46.5dB without the patch.

> The symptom was somehow related with the suspend or initialization.
> In the early post (sorry, this wasn't cited in the mail you added to
> Cc), Jiri mentioned:
> 
>   BUT, when I run pulse and it suspends the device (or whatever), all
>   the levels get down to 0 back again. When I raise it and run
>   mplayer, it gets to 0 immediately. If I raise it gets to 0 when
>   mplayer finishes and pulse writes 'protocol-native.c: Connection
>   died.'. It never raises automatically. And if I raise it during
>   playback, nothing plays at all.

Yeah, I did read that via the lklm archive. It's very odd that the
volumes change when pulse suspends the device... I could understand if
it changed when it opens them again (it will look at the product of the
mixers in the pipeline - e.g. Master+PCM - then work out the over all dB
then rearrange the sliders so that the same dB is ultimately obtained,
but perhaps via a different combination of mixer positions (e.g. it will
use all of Master first and only then adjust PCM). Overall the volume
itself should remain at the same dB tho'.

>> I'm no expert at the kernel side, but can't see much in the code that
>> would cause this.
>>
>> However, from Jiri's alsa-info, this looks a bit suspicious:
>>
>> Simple mixer control 'Master',0
>>   Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
>>   Playback channels: Mono
>>   Limits: Playback 0 - 64
>>   Mono: Playback 40 [62%] [1620.40dB] [on]
>>
>> 1620.40dB?? Really?
>>
>> Is perhaps the TLV fix for min-is-mute conflicting with a db range fix?
> 
> Well, it doesn't conflict but the old alsa-lib just takes the value
> as is -- i.e. the mute high bit is evaluated as a normal value.  So,
> obviously it passes a wrong value for the old alsa-lib.

Right. This actually probably explains things thinking about it...


Because the range is incorrectly reflected without the alsa-lib patch.
PA tries to set the volume to a "sensible" dB value.

This value would likely cause Master to be set to 0 (seeing as 1620.40dB
is 40, $sensible_dB is likely mapped to 0). When the device hits 0, the
kernel patch causes this to be properly reflected as "mute" (or -infdB?)
and thus PA notices this and sets both Master and PCM to 0 for that reason.

That might not be exactly what's going on, but it's probably some
similar variant thereof.


> The above result is likely because alsa-info was generated with the
> unpatched alsa-lib.  Jiri, could you regenerate alsa-info output with
> the fixed alsa-lib packages?  With the fixed alsa-lib, the dB value
> should be given correctly.


I'm surprised that the updated alsa-lib did not fix this problem. We're
now pushing out both the kernel and userspace fix, so I'll see if anyone
is affected by this in the same way as Jiri.

Jiri, when you tested the userspace updated package did you remember to
restart PA? If not then the test will not have worked as expected (the
fact that both your subsequent alsa-info's have sensible dB values for
Master suggests that the userspace fix is installed). Also when Takashi
asked for updated alsa-info script above, he meant to do it with both
the kernel and userspace patches applied.

> Anyway, judging from the fact above (giving a really wrong value), we
> will have to revert the commit...

Yes, sadly that seems so. Any bright idea on how to fix this in a less
invasive (i.e. backwards compatible) way?

Cheers

Col


-- 

Colin Guthrie
gmane(at)colin.guthr.ie
http://colin.guthr.ie/

Day Job:
  Tribalogic Limited [http://www.tribalogic.net/]
Open Source:
  Mageia Contributor [http://www.mageia.org/]
  PulseAudio Hacker [http://www.pulseaudio.org/]
  Trac Hacker [http://trac.edgewall.org/]

Re: HDA: no sound [was: mmotm 2010-10-20-15-01 uploaded]

[Jiri Slaby]

On 10/22/2010 11:40 AM, Takashi Iwai wrote:
> Hrm, is it with alsa.rpm and libasound2.rpm from OBS
> multimedia:audio:snapshot repo?

Aha, I dupped in the meantime and it vanished.

With the revert:
http://www.alsa-project.org/db/?f=7b9b41e9494674b1e5a8ec0b5dd250058ecff887

Without the revert:
http://www.alsa-project.org/db/?f=dc92721d4587f8f6289dfb25eb0ac523a2704f21

regards,
-- 
js

Re: HDA: no sound [was: mmotm 2010-10-20-15-01 uploaded]

[Takashi Iwai]

At Fri, 22 Oct 2010 11:45:36 +0200,
Jiri Slaby wrote:
> 
> On 10/22/2010 11:40 AM, Takashi Iwai wrote:
> > Hrm, is it with alsa.rpm and libasound2.rpm from OBS
> > multimedia:audio:snapshot repo?
> 
> Aha, I dupped in the meantime and it vanished.
> 
> With the revert:
> http://www.alsa-project.org/db/?f=7b9b41e9494674b1e5a8ec0b5dd250058ecff887
> 
> Without the revert:
> http://www.alsa-project.org/db/?f=dc92721d4587f8f6289dfb25eb0ac523a2704f21

It's still showing a strange value.  Weird.

I updated the version number and triggered rebuilds on OBS
multimedia:audio:snapshot packages.  To be sure, install alsa.rpm,
libasound2.rpm and alsa-utils.rpm later from the project.
Now they should have version 1.0.23.git*.

Also, you don't need to check the reverted kernel.  The only
interesting thing is to see whether the dB range brokeness is fixed
by alsa-lib update.


thanks,

Takashi

Re: HDA: no sound [was: mmotm 2010-10-20-15-01 uploaded]

[Jiri Slaby]

On 10/22/2010 12:26 PM, Takashi Iwai wrote:
> I updated the version number and triggered rebuilds on OBS
> multimedia:audio:snapshot packages.  To be sure, install alsa.rpm,
> libasound2.rpm and alsa-utils.rpm later from the project.
> Now they should have version 1.0.23.git*.

alsa-1.0.23.git20101018-1.1.x86_64
alsa-firmware-1.0.23-3.7.noarch
alsa-oss-1.0.17-31.4.x86_64
alsa-plugins-1.0.23-4.5.x86_64
alsa-plugins-pulse-1.0.23-4.5.x86_64
alsa-plugins-pulse-32bit-1.0.23-4.5.x86_64
alsa-plugins-32bit-1.0.23-4.5.x86_64
alsa-utils-1.0.23.git20101022-3.1.x86_64
libasound2-1.0.23.git20101018-1.1.x86_64
libasound2-32bit-1.0.23-6.5.x86_64

> Also, you don't need to check the reverted kernel.  The only
> interesting thing is to see whether the dB range brokeness is fixed
> by alsa-lib update.

With patch not reverted (i.e. no sound):
http://www.alsa-project.org/db/?f=378efb40f8c5b1d6204e93221512506e7bb7b061

regards,
-- 
js

Re: [alsa-devel] HDA: no sound [was: mmotm 2010-10-20-15-01 uploaded]

[Clemens Ladisch]

Jiri Slaby wrote:
> On 10/21/2010 10:05 AM, Takashi Iwai wrote:
> >   commit de8c85f7840e5e29629de95f5af24297fb325e0b
> >     ALSA: HDA: Sigmatel: work around incorrect master muting
> 
> Reverting this one helps.

This one introduced even more wrong volume information on some codecs.
Pleasy try this patch on top:

--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -32,6 +32,7 @@
 #include <sound/core.h>
 #include <sound/asoundef.h>
 #include <sound/jack.h>
+#include <sound/tlv.h>
 #include "hda_codec.h"
 #include "hda_local.h"
 #include "hda_beep.h"
@@ -1145,7 +1146,7 @@ static int stac92xx_build_controls(struct hda_codec *codec)
 		/* correct volume offset */
 		vmaster_tlv[2] += vmaster_tlv[3] * spec->volume_offset;
 		/* minimum value is actually mute */
-		vmaster_tlv[3] |= 0x1000;
+		vmaster_tlv[3] |= TLV_DB_SCALE_MUTE;
 		err = snd_hda_add_vmaster(codec, "Master Playback Volume",
 					  vmaster_tlv, slave_vols);
 		if (err < 0)

Re: [alsa-devel] HDA: no sound [was: mmotm 2010-10-20-15-01 uploaded]

[Jiri Slaby]

On 10/22/2010 01:31 PM, Clemens Ladisch wrote:
> Jiri Slaby wrote:
>> On 10/21/2010 10:05 AM, Takashi Iwai wrote:
>>>   commit de8c85f7840e5e29629de95f5af24297fb325e0b
>>>     ALSA: HDA: Sigmatel: work around incorrect master muting
>>
>> Reverting this one helps.
> 
> This one introduced even more wrong volume information on some codecs.
> Pleasy try this patch on top:

Yup, works for me.

> --- a/sound/pci/hda/patch_sigmatel.c
> +++ b/sound/pci/hda/patch_sigmatel.c
> @@ -32,6 +32,7 @@
>  #include <sound/core.h>
>  #include <sound/asoundef.h>
>  #include <sound/jack.h>
> +#include <sound/tlv.h>
>  #include "hda_codec.h"
>  #include "hda_local.h"
>  #include "hda_beep.h"
> @@ -1145,7 +1146,7 @@ static int stac92xx_build_controls(struct hda_codec *codec)
>  		/* correct volume offset */
>  		vmaster_tlv[2] += vmaster_tlv[3] * spec->volume_offset;
>  		/* minimum value is actually mute */
> -		vmaster_tlv[3] |= 0x1000;
> +		vmaster_tlv[3] |= TLV_DB_SCALE_MUTE;
>  		err = snd_hda_add_vmaster(codec, "Master Playback Volume",
>  					  vmaster_tlv, slave_vols);
>  		if (err < 0)
> 

thanks,
-- 
js

Re: DVB: af9015 defunct [was: mmotm 2010-10-20-15-01 uploaded]

[Mauro Carvalho Chehab]

Em 22-10-2010 07:21, Jiri Slaby escreveu:
> On 10/21/2010 07:51 PM, Jiri Slaby wrote:
>> On 10/21/2010 12:01 AM, akpm@linux-foundation.org wrote:
>>> The mm-of-the-moment snapshot 2010-10-20-15-01 has been uploaded to
>>
>> Well, this release happens to be a multimedia failure :(.
>>
>> I hit another regression against mmotm 2010-10-13-17-13, where
>> 0413:6029 (DVB USB tuner) can't be inited when plugged in. Even lsusb
>> waits inifitely.
> 
> Revert of this commit helps:


Ah, the problem is here (drivers/media/dvb/dvb-usb/af9015.c):

static struct tda18271_config af9015_tda18271_config = {
	.gate = TDA18271_GATE_DIGITAL,
	.small_i2c = 1,
};

small_i2c is an enum, currently defined as:

enum tda18271_small_i2c {
        TDA18271_39_BYTE_CHUNK_INIT = 0,
	TDA18271_16_BYTE_CHUNK_INIT = 16,
	TDA18271_08_BYTE_CHUNK_INIT = 8,
	TDA18271_03_BYTE_CHUNK_INIT = 3,
};

The value is just a magic number, but having it associated with the max
I2C size makes more sense than a random value.

The value, before the patch was:

enum tda18271_small_i2c {
        TDA18271_39_BYTE_CHUNK_INIT = 0,
	TDA18271_16_BYTE_CHUNK_INIT = 1,
	TDA18271_08_BYTE_CHUNK_INIT = 2,
};

So, it seems that the max I2C size for af9015 is 16 bytes. The proper init
should be:

	.small_i2c = TDA18271_16_BYTE_CHUNK_INIT;

Please check if the enclosed patch fixes the issue.

Thanks,
Mauro

---

[media] af9015: Properly initialize tda18271.small_i2c

As reported by Jiri, a regression at mm series is happening on af9015:

tda18271 18-00c0: creating new instance
TDA18271HD/C2 detected @ 18-00c0
af9015: command failed:1
tda18271_write_regs: [18-00c0|M] ERROR: idx = 0x0, len = 39,
i2c_transfer returned: -1
af9015: command failed:1

The cause is that tda18271.small_i2c is an enum. Drivers should use the value
alias, instead of its number, as the "magic" number may change anytime.

Reported-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c
index 759cbf8..f5e4066 100644
--- a/drivers/media/dvb/dvb-usb/af9015.c
+++ b/drivers/media/dvb/dvb-usb/af9015.c
@@ -1144,7 +1144,7 @@ static struct qt1010_config af9015_qt1010_config = {
 
 static struct tda18271_config af9015_tda18271_config = {
 	.gate = TDA18271_GATE_DIGITAL,
-	.small_i2c = 1,
+	.small_i2c = TDA18271_16_BYTE_CHUNK_INIT;,
 };
 
 static struct mxl5005s_config af9015_mxl5003_config = {

Re: [alsa-devel] HDA: no sound [was: mmotm 2010-10-20-15-01 uploaded]

[Takashi Iwai]

At Fri, 22 Oct 2010 13:31:53 +0200,
Clemens Ladisch wrote:
> 
> Jiri Slaby wrote:
> > On 10/21/2010 10:05 AM, Takashi Iwai wrote:
> > >   commit de8c85f7840e5e29629de95f5af24297fb325e0b
> > >     ALSA: HDA: Sigmatel: work around incorrect master muting
> > 
> > Reverting this one helps.
> 
> This one introduced even more wrong volume information on some codecs.
> Pleasy try this patch on top:

Argh!  There is always a reason why we should define a constant.
I applied the fix now.

This explains why the old patch worked on Colin's machine.
His codec chip is different (STAC9200?), and it doesn't go in this
code path but has a static Master volume creation.


thanks,

Takashi

> 
> --- a/sound/pci/hda/patch_sigmatel.c
> +++ b/sound/pci/hda/patch_sigmatel.c
> @@ -32,6 +32,7 @@
>  #include <sound/core.h>
>  #include <sound/asoundef.h>
>  #include <sound/jack.h>
> +#include <sound/tlv.h>
>  #include "hda_codec.h"
>  #include "hda_local.h"
>  #include "hda_beep.h"
> @@ -1145,7 +1146,7 @@ static int stac92xx_build_controls(struct hda_codec *codec)
>  		/* correct volume offset */
>  		vmaster_tlv[2] += vmaster_tlv[3] * spec->volume_offset;
>  		/* minimum value is actually mute */
> -		vmaster_tlv[3] |= 0x1000;
> +		vmaster_tlv[3] |= TLV_DB_SCALE_MUTE;
>  		err = snd_hda_add_vmaster(codec, "Master Playback Volume",
>  					  vmaster_tlv, slave_vols);
>  		if (err < 0)
> 

Re: DVB: af9015 defunct [was: mmotm 2010-10-20-15-01 uploaded]

[Jiri Slaby]

On 10/22/2010 03:56 PM, Mauro Carvalho Chehab wrote:
> --- a/drivers/media/dvb/dvb-usb/af9015.c
> +++ b/drivers/media/dvb/dvb-usb/af9015.c
> @@ -1144,7 +1144,7 @@ static struct qt1010_config af9015_qt1010_config = {
>  
>  static struct tda18271_config af9015_tda18271_config = {
>  	.gate = TDA18271_GATE_DIGITAL,
> -	.small_i2c = 1,
> +	.small_i2c = TDA18271_16_BYTE_CHUNK_INIT;,

No, it doesn't help (note the i2c line which prints the small_i2c entry):
dvb-usb: found a 'Leadtek WinFast DTV Dongle Gold' in cold state, will
try to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'
dvb-usb: found a 'Leadtek WinFast DTV Dongle Gold' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software
demuxer.
DVB: registering new adapter (Leadtek WinFast DTV Dongle Gold)
af9013: firmware version:4.95.0.0
DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)...
af9015_tuner_attach: i2c 16
tda18271 16-00c0: creating new instance
TDA18271HD/C2 detected @ 16-00c0
af9015: command failed:1
tda18271_write_regs: [16-00c0|M] ERROR: idx = 0x0, len = 39,
i2c_transfer returned: -1
af9015: command failed:1
tda18271_write_regs: [16-00c0|M] ERROR: idx = 0x20, len = 1,
i2c_transfer returned: -1
af9015: command failed:1
tda18271_write_regs: [16-00c0|M] ERROR: idx = 0x20, len = 1,
i2c_transfer returned: -1
af9015: command failed:1
tda18271_write_regs: [16-00c0|M] ERROR: idx = 0x20, len = 1,
i2c_transfer returned: -1
af9015: command failed:1
tda18271_write_regs: [16-00c0|M] ERROR: idx = 0x20, len = 1,
i2c_transfer returned: -1
af9015: command failed:1
tda18271_write_regs: [16-00c0|M] ERROR: idx = 0x5, len = 11,
i2c_transfer returned: -1
af9015: command failed:1
tda18271_write_regs: [16-00c0|M] ERROR: idx = 0x13, len = 1,
i2c_transfer returned: -1
af9015: command failed:1
tda18271_write_regs: [16-00c0|M] ERROR: idx = 0x13, len = 1,
i2c_transfer returned: -1
af9015: command failed:1
tda18271_write_regs: [16-00c0|M] ERROR: idx = 0x3, len = 1, i2c_transfer
returned: -1
af9015: command failed:1
tda18271_write_regs: [16-00c0|M] ERROR: idx = 0x5, len = 7, i2c_transfer
returned: -1
af9015: command failed:1
tda18271_write_regs: [16-00c0|M] ERROR: idx = 0x4, len = 1, i2c_transfer
returned: -1
af9015: command failed:1
tda18271_write_regs: [16-00c0|M] ERROR: idx = 0x5, len = 11,
i2c_transfer returned: -1
af9015: command failed:1
tda18271_write_regs: [16-00c0|M] ERROR: idx = 0x3, len = 1, i2c_transfer
returned: -1
af9015: command failed:1
tda18271_write_regs: [16-00c0|M] ERROR: idx = 0x5, len = 7, i2c_transfer
returned: -1
af9015: command failed:1
tda18271_write_regs: [16-00c0|M] ERROR: idx = 0x4, len = 1, i2c_transfer
returned: -1
af9015: command failed:1
tda18271_write_regs: [16-00c0|M] ERROR: idx = 0x5, len = 11,
i2c_transfer returned: -1
af9015: command failed:1
tda18271_write_regs: [16-00c0|M] ERROR: idx = 0x3, len = 1, i2c_transfer
returned: -1
af9015: command failed:1
tda18271_write_regs: [16-00c0|M] ERROR: idx = 0x5, len = 7, i2c_transfer
returned: -1
af9015: command failed:1
tda18271_write_regs: [16-00c0|M] ERROR: idx = 0x4, len = 1, i2c_transfer
returned: -1
af9015: command failed:1
tda18271_write_regs: [16-00c0|M] ERROR: idx = 0x6, len = 1, i2c_transfer
returned: -1
af9015: command failed:1
tda18271_write_regs: [16-00c0|M] ERROR: idx = 0x3, len = 1, i2c_transfer
returned: -1
dvb-usb: Leadtek WinFast DTV Dongle Gold successfully initialized and
connected.
usbcore: registered new interface driver dvb_usb_af9015


regards,
-- 
js

Re: HDA: no sound [was: mmotm 2010-10-20-15-01 uploaded]

[Colin Guthrie]

'Twas brillig, and Takashi Iwai at 22/10/10 15:03 did gyre and gimble:
> At Fri, 22 Oct 2010 13:31:53 +0200,
> Clemens Ladisch wrote:
>>
>> Jiri Slaby wrote:
>>> On 10/21/2010 10:05 AM, Takashi Iwai wrote:
>>>>   commit de8c85f7840e5e29629de95f5af24297fb325e0b
>>>>     ALSA: HDA: Sigmatel: work around incorrect master muting
>>>
>>> Reverting this one helps.
>>
>> This one introduced even more wrong volume information on some codecs.
>> Pleasy try this patch on top:
> 
> Argh!  There is always a reason why we should define a constant.
> I applied the fix now.
> 
> This explains why the old patch worked on Colin's machine.
> His codec chip is different (STAC9200?), and it doesn't go in this
> code path but has a static Master volume creation.

Yup I have a STAC9200 so that explains it... silly me as I did see this
line and figured "the value will be right" rather than questioning it.

Anyway, glad this has been found and there is now (presumably) no need
for a revert :)

Col

-- 

Colin Guthrie
gmane(at)colin.guthr.ie
http://colin.guthr.ie/

Day Job:
  Tribalogic Limited [http://www.tribalogic.net/]
Open Source:
  Mageia Contributor [http://www.mageia.org/]
  PulseAudio Hacker [http://www.pulseaudio.org/]
  Trac Hacker [http://trac.edgewall.org/]

Re: DVB: af9015 defunct [was: mmotm 2010-10-20-15-01 uploaded]

[Mauro Carvalho Chehab]

Em 22-10-2010 12:06, Jiri Slaby escreveu:
> On 10/22/2010 03:56 PM, Mauro Carvalho Chehab wrote:
>> --- a/drivers/media/dvb/dvb-usb/af9015.c
>> +++ b/drivers/media/dvb/dvb-usb/af9015.c
>> @@ -1144,7 +1144,7 @@ static struct qt1010_config af9015_qt1010_config = {
>>  
>>  static struct tda18271_config af9015_tda18271_config = {
>>  	.gate = TDA18271_GATE_DIGITAL,
>> -	.small_i2c = 1,
>> +	.small_i2c = TDA18271_16_BYTE_CHUNK_INIT;,
> 
> No, it doesn't help (note the i2c line which prints the small_i2c entry):
> dvb-usb: found a 'Leadtek WinFast DTV Dongle Gold' in cold state, will
> try to load a firmware
> dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'
> dvb-usb: found a 'Leadtek WinFast DTV Dongle Gold' in warm state.
> dvb-usb: will pass the complete MPEG2 transport stream to the software
> demuxer.
> DVB: registering new adapter (Leadtek WinFast DTV Dongle Gold)
> af9013: firmware version:4.95.0.0
> DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)...
> af9015_tuner_attach: i2c 16
> tda18271 16-00c0: creating new instance
> TDA18271HD/C2 detected @ 16-00c0
> af9015: command failed:1

> tda18271_write_regs: [16-00c0|M] ERROR: idx = 0x0, len = 39,
> i2c_transfer returned: -1

Hmm...

int tda18271_write_regs(struct dvb_frontend *fe, int idx, int len)
{
...
        switch (priv->small_i2c) {
        case TDA18271_03_BYTE_CHUNK_INIT:
                max = 3;
                break;
        case TDA18271_08_BYTE_CHUNK_INIT:
                max = 8;
                break;
        case TDA18271_16_BYTE_CHUNK_INIT:
                max = 16;
                break;
        case TDA18271_39_BYTE_CHUNK_INIT:
        default:
                max = 39;
        }


with small_i2c = 1, the driver will not restrict the maximum length size.

It's weird that the patch didn't fix it. Are you sure that reverting this
patch is enough to make the driver work?

Please test this one.

It will properly log the size of the message the driver tried to use, and will
reduce the max number of bytes per I2C transfer to 8.

Cheers,
Mauro

---

Fix tda18271 usage with af9015 

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

diff --git a/drivers/media/common/tuners/tda18271-common.c b/drivers/media/common/tuners/tda18271-common.c
index 195b30e..5466d47 100644
--- a/drivers/media/common/tuners/tda18271-common.c
+++ b/drivers/media/common/tuners/tda18271-common.c
@@ -237,7 +237,7 @@ int tda18271_write_regs(struct dvb_frontend *fe, int idx, int len)
 
 	if (ret != 1)
 		tda_err("ERROR: idx = 0x%x, len = %d, "
-			"i2c_transfer returned: %d\n", idx, len, ret);
+			"i2c_transfer returned: %d\n", idx, max, ret);
 
 	return (ret == 1 ? 0 : ret);
 }
diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c
index 3ef19a8..e3c9bb5 100644
--- a/drivers/media/dvb/dvb-usb/af9015.c
+++ b/drivers/media/dvb/dvb-usb/af9015.c
@@ -1131,7 +1131,7 @@ static struct qt1010_config af9015_qt1010_config = {
 
 static struct tda18271_config af9015_tda18271_config = {
 	.gate = TDA18271_GATE_DIGITAL,
-	.small_i2c = 1,
+	.small_i2c = TDA18271_08_BYTE_CHUNK_INIT,
 };
 
 static struct mxl5005s_config af9015_mxl5003_config = {

	

Re: DVB: af9015 defunct [was: mmotm 2010-10-20-15-01 uploaded]

[Jiri Slaby]

On 10/27/2010 06:12 PM, Mauro Carvalho Chehab wrote:
> Em 22-10-2010 12:06, Jiri Slaby escreveu:
>> On 10/22/2010 03:56 PM, Mauro Carvalho Chehab wrote:
>>> --- a/drivers/media/dvb/dvb-usb/af9015.c
>>> +++ b/drivers/media/dvb/dvb-usb/af9015.c
>>> @@ -1144,7 +1144,7 @@ static struct qt1010_config af9015_qt1010_config = {
>>>  
>>>  static struct tda18271_config af9015_tda18271_config = {
>>>  	.gate = TDA18271_GATE_DIGITAL,
>>> -	.small_i2c = 1,
>>> +	.small_i2c = TDA18271_16_BYTE_CHUNK_INIT;,
>>
>> No, it doesn't help (note the i2c line which prints the small_i2c entry):
>> dvb-usb: found a 'Leadtek WinFast DTV Dongle Gold' in cold state, will
>> try to load a firmware
>> dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'
>> dvb-usb: found a 'Leadtek WinFast DTV Dongle Gold' in warm state.
>> dvb-usb: will pass the complete MPEG2 transport stream to the software
>> demuxer.
>> DVB: registering new adapter (Leadtek WinFast DTV Dongle Gold)
>> af9013: firmware version:4.95.0.0
>> DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)...
>> af9015_tuner_attach: i2c 16
>> tda18271 16-00c0: creating new instance
>> TDA18271HD/C2 detected @ 16-00c0
>> af9015: command failed:1
> 
>> tda18271_write_regs: [16-00c0|M] ERROR: idx = 0x0, len = 39,
>> i2c_transfer returned: -1
> 
> Hmm...
> 
> int tda18271_write_regs(struct dvb_frontend *fe, int idx, int len)
> {
> ...
>         switch (priv->small_i2c) {
>         case TDA18271_03_BYTE_CHUNK_INIT:
>                 max = 3;
>                 break;
>         case TDA18271_08_BYTE_CHUNK_INIT:
>                 max = 8;
>                 break;
>         case TDA18271_16_BYTE_CHUNK_INIT:
>                 max = 16;
>                 break;
>         case TDA18271_39_BYTE_CHUNK_INIT:
>         default:
>                 max = 39;
>         }
> 
> 
> with small_i2c = 1, the driver will not restrict the maximum length size.

Actually it will make it 39.

> It's weird that the patch didn't fix it. Are you sure that reverting this
> patch is enough to make the driver work?

Yes, I'm 100% sure.

> Please test this one.
> 
> It will properly log the size of the message the driver tried to use, and will
> reduce the max number of bytes per I2C transfer to 8.

Yes, this one works. And to be sure that 16 doesn't work I unplugged and
replugged the device (I didn't last time). And boom, it works too. So
.small_i2c = TDA18271_16_BYTE_CHUNK_INIT fixes the issue as well.

> --- a/drivers/media/dvb/dvb-usb/af9015.c
> +++ b/drivers/media/dvb/dvb-usb/af9015.c
> @@ -1131,7 +1131,7 @@ static struct qt1010_config af9015_qt1010_config = {
>  
>  static struct tda18271_config af9015_tda18271_config = {
>  	.gate = TDA18271_GATE_DIGITAL,
> -	.small_i2c = 1,
> +	.small_i2c = TDA18271_08_BYTE_CHUNK_INIT,
>  };
>  
>  static struct mxl5005s_config af9015_mxl5003_config = {

thanks,
-- 
js

Re: DVB: af9015 defunct [was: mmotm 2010-10-20-15-01 uploaded]

[Antti Palosaari]

On 10/27/2010 07:12 PM, Mauro Carvalho Chehab wrote:
> int tda18271_write_regs(struct dvb_frontend *fe, int idx, int len)
> {
> ...
>          switch (priv->small_i2c) {
>          case TDA18271_03_BYTE_CHUNK_INIT:
>                  max = 3;
>                  break;
>          case TDA18271_08_BYTE_CHUNK_INIT:
>                  max = 8;
>                  break;
>          case TDA18271_16_BYTE_CHUNK_INIT:
>                  max = 16;
>                  break;
>          case TDA18271_39_BYTE_CHUNK_INIT:
>          default:
>                  max = 39;
>          }
>
>
> with small_i2c = 1, the driver will not restrict the maximum length size.
>
> It's weird that the patch didn't fix it. Are you sure that reverting this
> patch is enough to make the driver work?
>
> Please test this one.
>
> It will properly log the size of the message the driver tried to use, and will
> reduce the max number of bytes per I2C transfer to 8.

All in all, this small_i2c was added (Michael Krufky and I) when this 
tuner was taken in use with af9015 and it was 16 bytes initially. I 
think those other chunks are added later.
AF9015 I2C adapter can write 21 bytes at once.
Correct solution is to add option which splits writes as wanted (like 
option .i2c_wr_max) to the TDA18271. I have no HW to test.

Antti
-- 
http://palosaari.fi/

Re: DVB: af9015 defunct [was: mmotm 2010-10-20-15-01 uploaded]

[Mauro Carvalho Chehab]

Em 27-10-2010 14:36, Jiri Slaby escreveu:

>> It will properly log the size of the message the driver tried to use, and will
>> reduce the max number of bytes per I2C transfer to 8.
> 
> Yes, this one works. And to be sure that 16 doesn't work I unplugged and
> replugged the device (I didn't last time). And boom, it works too. So
> .small_i2c = TDA18271_16_BYTE_CHUNK_INIT fixes the issue as well.

Ok, I'm adding the enclosing patch to the tree, adding a proper description
about the regression. 

I'll be adding it to the tree.

Thanks!
Mauro

---

commit 7655e594945289b418af39f6669fea4666a7b520
Author: Mauro Carvalho Chehab <mchehab@redhat.com>
Date:   Wed Oct 27 14:55:34 2010 -0200

    [media] af9015: Fix max I2C message size when used with tda18271
    
    Changeset 1724c8fa7eb33d68898e060a08a8e6a88348b62f added an option to change
    the maximum I2C size to 8 bytes. However, it forgot to replace the previous
    usage at af9015 to use the newly defined macro value
    (TDA18271_16_BYTE_CHUNK_INIT).
    
    A latter changeset (e350d44fed8eb86a7192a579e3687fcd76a4645b) extended the
    possible values for .small_i2c field and, instead of using a random sequence
    of numbers, it used a number that makes more sense (e. g. the actual limit,
    in terms of bytes).
    
    However, as af9015 were using .small_i2c = 1, this become undefined, and the
    restriction of a max size of 16 was gone.
    
    While here, fix the reported msg size at tda18271-common.c.
    
    Reported-by: Jiri Slaby <jirislaby@gmail.com>
    Tested-by: Jiri Slaby <jirislaby@gmail.com>
    Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

diff --git a/drivers/media/common/tuners/tda18271-common.c b/drivers/media/common/tuners/tda18271-common.c
index 195b30e..5466d47 100644
--- a/drivers/media/common/tuners/tda18271-common.c
+++ b/drivers/media/common/tuners/tda18271-common.c
@@ -237,7 +237,7 @@ int tda18271_write_regs(struct dvb_frontend *fe, int idx, int len)
 
 	if (ret != 1)
 		tda_err("ERROR: idx = 0x%x, len = %d, "
-			"i2c_transfer returned: %d\n", idx, len, ret);
+			"i2c_transfer returned: %d\n", idx, max, ret);
 
 	return (ret == 1 ? 0 : ret);
 }
diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c
index 3ef19a8..31c0a0e 100644
--- a/drivers/media/dvb/dvb-usb/af9015.c
+++ b/drivers/media/dvb/dvb-usb/af9015.c
@@ -1131,7 +1131,7 @@ static struct qt1010_config af9015_qt1010_config = {
 
 static struct tda18271_config af9015_tda18271_config = {
 	.gate = TDA18271_GATE_DIGITAL,
-	.small_i2c = 1,
+	.small_i2c = TDA18271_16_BYTE_CHUNK_INIT,
 };
 
 static struct mxl5005s_config af9015_mxl5003_config = {

Re: DVB: af9015 defunct [was: mmotm 2010-10-20-15-01 uploaded]

[Mauro Carvalho Chehab]

Em 27-10-2010 14:41, Antti Palosaari escreveu:
> On 10/27/2010 07:12 PM, Mauro Carvalho Chehab wrote:
>> int tda18271_write_regs(struct dvb_frontend *fe, int idx, int len)
>> {
>> ...
>>          switch (priv->small_i2c) {
>>          case TDA18271_03_BYTE_CHUNK_INIT:
>>                  max = 3;
>>                  break;
>>          case TDA18271_08_BYTE_CHUNK_INIT:
>>                  max = 8;
>>                  break;
>>          case TDA18271_16_BYTE_CHUNK_INIT:
>>                  max = 16;
>>                  break;
>>          case TDA18271_39_BYTE_CHUNK_INIT:
>>          default:
>>                  max = 39;
>>          }
>>
>>
>> with small_i2c = 1, the driver will not restrict the maximum length size.
>>
>> It's weird that the patch didn't fix it. Are you sure that reverting this
>> patch is enough to make the driver work?
>>
>> Please test this one.
>>
>> It will properly log the size of the message the driver tried to use, and will
>> reduce the max number of bytes per I2C transfer to 8.
> 
> All in all, this small_i2c was added (Michael Krufky and I) when this tuner was taken in use with af9015 and it was 16 bytes initially. I think those other chunks are added later.

Yeah, another change added a max restriction of 8.

> AF9015 I2C adapter can write 21 bytes at once.
> Correct solution is to add option which splits writes as wanted (like option .i2c_wr_max) to the TDA18271. I have no HW to test.

Changing to 21 won't change anything in practice, as it will still use 3 URB's for transferring data.
Only at setup, it needs to write values on more than 16 registers.

The current way that .small_i2c is defined is like that: it specifies the maximum amount of data
that can be transferred.

I won't object to change it from an enum into an integer, although I would
do it only if we need to touch on that code for another reason.

Cheers,
Mauro

Re: mmotm 2010-10-20 - netfilter Kconfig whinge

[Patrick McHardy]

[-- Attachment #1: Type: text/plain, Size: 763 bytes --]

Am 21.10.2010 13:14, schrieb Valdis.Kletnieks@vt.edu:
> On Wed, 20 Oct 2010 15:01:43 PDT, akpm@linux-foundation.org said:
>> The mm-of-the-moment snapshot 2010-10-20-15-01 has been uploaded to
>>
>>    http://userweb.kernel.org/~akpm/mmotm/
> 
> Seen during 'make oldconfig':
> 
>       Input subsystem LEDs Trigger (LEDS_TRIGGER_INPUT) [N/m/y/?] (NEW) m
>       *
>       * iptables trigger is under Netfilter config (LED target)
>       *
> warning: (NETFILTER_XT_MATCH_REALM && NET && INET && NETFILTER && NETFILTER_XTABLES && NETFILTER_ADVANCED || NET_CLS_ROUTE4 && NET && NET_SCHED) selects NET_CLS_ROUTE which has unmet direct dependencies (NET && NET_SCHED)
> #
> # configuration written to .config

Thanks for the report, this is how I intend to fix it:


[-- Attachment #2: x --]
[-- Type: text/plain, Size: 12101 bytes --]

commit f6ce9a8f0a591865534f1fdd78848c328e36f08d
Author: Patrick McHardy <kaber@trash.net>
Date:   Fri Oct 29 19:09:49 2010 +0200

    netfilter: fix Kconfig dependencies
    
    Fix dependencies of netfilter realm match: it depends on NET_CLS_ROUTE,
    which itself depends on NET_SCHED; this dependency is missing from netfilter.
    
    Since matching on realms is also useful without having NET_SCHED enabled and
    the option really only controls whether the tclassid member is included in
    route and dst entries, rename the config option to IP_ROUTE_CLASSID and move
    it outside of traffic scheduling context to get rid of the NET_SCHED dependeny.
    
    Reported-by: Vladis Kletnieks <Valdis.Kletnieks@vt.edu>
    Signed-off-by: Patrick McHardy <kaber@trash.net>

diff --git a/include/net/dst.h b/include/net/dst.h
index ffe9cb7..4639ca5 100644
--- a/include/net/dst.h
+++ b/include/net/dst.h
@@ -72,7 +72,7 @@ struct dst_entry {
 
 	u32			metrics[RTAX_MAX];
 
-#ifdef CONFIG_NET_CLS_ROUTE
+#ifdef CONFIG_IP_ROUTE_CLASSID
 	__u32			tclassid;
 #else
 	__u32			__pad2;
diff --git a/include/net/ip_fib.h b/include/net/ip_fib.h
index ba3666d..626b448 100644
--- a/include/net/ip_fib.h
+++ b/include/net/ip_fib.h
@@ -55,7 +55,7 @@ struct fib_nh {
 	int			nh_weight;
 	int			nh_power;
 #endif
-#ifdef CONFIG_NET_CLS_ROUTE
+#ifdef CONFIG_IP_ROUTE_CLASSID
 	__u32			nh_tclassid;
 #endif
 	int			nh_oif;
@@ -199,7 +199,7 @@ static inline int fib_lookup(struct net *net, const struct flowi *flp,
 extern int __net_init fib4_rules_init(struct net *net);
 extern void __net_exit fib4_rules_exit(struct net *net);
 
-#ifdef CONFIG_NET_CLS_ROUTE
+#ifdef CONFIG_IP_ROUTE_CLASSID
 extern u32 fib_rules_tclass(struct fib_result *res);
 #endif
 
@@ -233,7 +233,7 @@ extern struct fib_table *fib_hash_table(u32 id);
 
 static inline void fib_combine_itag(u32 *itag, struct fib_result *res)
 {
-#ifdef CONFIG_NET_CLS_ROUTE
+#ifdef CONFIG_IP_ROUTE_CLASSID
 #ifdef CONFIG_IP_MULTIPLE_TABLES
 	u32 rtag;
 #endif
diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig
index 9e95d7f..dcb2e18 100644
--- a/net/ipv4/Kconfig
+++ b/net/ipv4/Kconfig
@@ -140,6 +140,9 @@ config IP_ROUTE_VERBOSE
 	  handled by the klogd daemon which is responsible for kernel messages
 	  ("man klogd").
 
+config IP_ROUTE_CLASSID
+	bool
+
 config IP_PNP
 	bool "IP: kernel level autoconfiguration"
 	help
@@ -655,4 +658,3 @@ config TCP_MD5SIG
 	  on the Internet.
 
 	  If unsure, say N.
-
diff --git a/net/ipv4/fib_rules.c b/net/ipv4/fib_rules.c
index 7981a24..9cefe72 100644
--- a/net/ipv4/fib_rules.c
+++ b/net/ipv4/fib_rules.c
@@ -41,12 +41,12 @@ struct fib4_rule {
 	__be32			srcmask;
 	__be32			dst;
 	__be32			dstmask;
-#ifdef CONFIG_NET_CLS_ROUTE
+#ifdef CONFIG_IP_ROUTE_CLASSID
 	u32			tclassid;
 #endif
 };
 
-#ifdef CONFIG_NET_CLS_ROUTE
+#ifdef CONFIG_IP_ROUTE_CLASSID
 u32 fib_rules_tclass(struct fib_result *res)
 {
 	return res->r ? ((struct fib4_rule *) res->r)->tclassid : 0;
@@ -165,7 +165,7 @@ static int fib4_rule_configure(struct fib_rule *rule, struct sk_buff *skb,
 	if (frh->dst_len)
 		rule4->dst = nla_get_be32(tb[FRA_DST]);
 
-#ifdef CONFIG_NET_CLS_ROUTE
+#ifdef CONFIG_IP_ROUTE_CLASSID
 	if (tb[FRA_FLOW])
 		rule4->tclassid = nla_get_u32(tb[FRA_FLOW]);
 #endif
@@ -195,7 +195,7 @@ static int fib4_rule_compare(struct fib_rule *rule, struct fib_rule_hdr *frh,
 	if (frh->tos && (rule4->tos != frh->tos))
 		return 0;
 
-#ifdef CONFIG_NET_CLS_ROUTE
+#ifdef CONFIG_IP_ROUTE_CLASSID
 	if (tb[FRA_FLOW] && (rule4->tclassid != nla_get_u32(tb[FRA_FLOW])))
 		return 0;
 #endif
@@ -224,7 +224,7 @@ static int fib4_rule_fill(struct fib_rule *rule, struct sk_buff *skb,
 	if (rule4->src_len)
 		NLA_PUT_BE32(skb, FRA_SRC, rule4->src);
 
-#ifdef CONFIG_NET_CLS_ROUTE
+#ifdef CONFIG_IP_ROUTE_CLASSID
 	if (rule4->tclassid)
 		NLA_PUT_U32(skb, FRA_FLOW, rule4->tclassid);
 #endif
diff --git a/net/ipv4/fib_semantics.c b/net/ipv4/fib_semantics.c
index 3e0da3e..a72c62d 100644
--- a/net/ipv4/fib_semantics.c
+++ b/net/ipv4/fib_semantics.c
@@ -200,7 +200,7 @@ static inline int nh_comp(const struct fib_info *fi, const struct fib_info *ofi)
 #ifdef CONFIG_IP_ROUTE_MULTIPATH
 		    nh->nh_weight != onh->nh_weight ||
 #endif
-#ifdef CONFIG_NET_CLS_ROUTE
+#ifdef CONFIG_IP_ROUTE_CLASSID
 		    nh->nh_tclassid != onh->nh_tclassid ||
 #endif
 		    ((nh->nh_flags ^ onh->nh_flags) & ~RTNH_F_DEAD))
@@ -422,7 +422,7 @@ static int fib_get_nhs(struct fib_info *fi, struct rtnexthop *rtnh,
 
 			nla = nla_find(attrs, attrlen, RTA_GATEWAY);
 			nexthop_nh->nh_gw = nla ? nla_get_be32(nla) : 0;
-#ifdef CONFIG_NET_CLS_ROUTE
+#ifdef CONFIG_IP_ROUTE_CLASSID
 			nla = nla_find(attrs, attrlen, RTA_FLOW);
 			nexthop_nh->nh_tclassid = nla ? nla_get_u32(nla) : 0;
 #endif
@@ -476,7 +476,7 @@ int fib_nh_match(struct fib_config *cfg, struct fib_info *fi)
 			nla = nla_find(attrs, attrlen, RTA_GATEWAY);
 			if (nla && nla_get_be32(nla) != nh->nh_gw)
 				return 1;
-#ifdef CONFIG_NET_CLS_ROUTE
+#ifdef CONFIG_IP_ROUTE_CLASSID
 			nla = nla_find(attrs, attrlen, RTA_FLOW);
 			if (nla && nla_get_u32(nla) != nh->nh_tclassid)
 				return 1;
@@ -783,7 +783,7 @@ struct fib_info *fib_create_info(struct fib_config *cfg)
 			goto err_inval;
 		if (cfg->fc_gw && fi->fib_nh->nh_gw != cfg->fc_gw)
 			goto err_inval;
-#ifdef CONFIG_NET_CLS_ROUTE
+#ifdef CONFIG_IP_ROUTE_CLASSID
 		if (cfg->fc_flow && fi->fib_nh->nh_tclassid != cfg->fc_flow)
 			goto err_inval;
 #endif
@@ -796,7 +796,7 @@ struct fib_info *fib_create_info(struct fib_config *cfg)
 		nh->nh_oif = cfg->fc_oif;
 		nh->nh_gw = cfg->fc_gw;
 		nh->nh_flags = cfg->fc_flags;
-#ifdef CONFIG_NET_CLS_ROUTE
+#ifdef CONFIG_IP_ROUTE_CLASSID
 		nh->nh_tclassid = cfg->fc_flow;
 #endif
 #ifdef CONFIG_IP_ROUTE_MULTIPATH
@@ -1006,7 +1006,7 @@ int fib_dump_info(struct sk_buff *skb, u32 pid, u32 seq, int event,
 
 		if (fi->fib_nh->nh_oif)
 			NLA_PUT_U32(skb, RTA_OIF, fi->fib_nh->nh_oif);
-#ifdef CONFIG_NET_CLS_ROUTE
+#ifdef CONFIG_IP_ROUTE_CLASSID
 		if (fi->fib_nh[0].nh_tclassid)
 			NLA_PUT_U32(skb, RTA_FLOW, fi->fib_nh[0].nh_tclassid);
 #endif
@@ -1031,7 +1031,7 @@ int fib_dump_info(struct sk_buff *skb, u32 pid, u32 seq, int event,
 
 			if (nh->nh_gw)
 				NLA_PUT_BE32(skb, RTA_GATEWAY, nh->nh_gw);
-#ifdef CONFIG_NET_CLS_ROUTE
+#ifdef CONFIG_IP_ROUTE_CLASSID
 			if (nh->nh_tclassid)
 				NLA_PUT_U32(skb, RTA_FLOW, nh->nh_tclassid);
 #endif
diff --git a/net/ipv4/ip_input.c b/net/ipv4/ip_input.c
index d859bcc..d7b2b09 100644
--- a/net/ipv4/ip_input.c
+++ b/net/ipv4/ip_input.c
@@ -340,7 +340,7 @@ static int ip_rcv_finish(struct sk_buff *skb)
 		}
 	}
 
-#ifdef CONFIG_NET_CLS_ROUTE
+#ifdef CONFIG_IP_ROUTE_CLASSID
 	if (unlikely(skb_dst(skb)->tclassid)) {
 		struct ip_rt_acct *st = this_cpu_ptr(ip_rt_acct);
 		u32 idx = skb_dst(skb)->tclassid;
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index 987bf9a..866b226 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -509,7 +509,7 @@ static const struct file_operations rt_cpu_seq_fops = {
 	.release = seq_release,
 };
 
-#ifdef CONFIG_NET_CLS_ROUTE
+#ifdef CONFIG_IP_ROUTE_CLASSID
 static int rt_acct_proc_show(struct seq_file *m, void *v)
 {
 	struct ip_rt_acct *dst, *src;
@@ -562,14 +562,14 @@ static int __net_init ip_rt_do_proc_init(struct net *net)
 	if (!pde)
 		goto err2;
 
-#ifdef CONFIG_NET_CLS_ROUTE
+#ifdef CONFIG_IP_ROUTE_CLASSID
 	pde = proc_create("rt_acct", 0, net->proc_net, &rt_acct_proc_fops);
 	if (!pde)
 		goto err3;
 #endif
 	return 0;
 
-#ifdef CONFIG_NET_CLS_ROUTE
+#ifdef CONFIG_IP_ROUTE_CLASSID
 err3:
 	remove_proc_entry("rt_cache", net->proc_net_stat);
 #endif
@@ -583,7 +583,7 @@ static void __net_exit ip_rt_do_proc_exit(struct net *net)
 {
 	remove_proc_entry("rt_cache", net->proc_net_stat);
 	remove_proc_entry("rt_cache", net->proc_net);
-#ifdef CONFIG_NET_CLS_ROUTE
+#ifdef CONFIG_IP_ROUTE_CLASSID
 	remove_proc_entry("rt_acct", net->proc_net);
 #endif
 }
@@ -1804,7 +1804,7 @@ void ip_rt_get_source(u8 *addr, struct rtable *rt)
 	memcpy(addr, &src, 4);
 }
 
-#ifdef CONFIG_NET_CLS_ROUTE
+#ifdef CONFIG_IP_ROUTE_CLASSID
 static void set_class_tag(struct rtable *rt, u32 tag)
 {
 	if (!(rt->dst.tclassid & 0xFFFF))
@@ -1831,7 +1831,7 @@ static void rt_set_nexthop(struct rtable *rt, struct fib_result *res, u32 itag)
 			    rt->dst.dev->mtu > 576)
 				rt->dst.metrics[RTAX_MTU-1] = 576;
 		}
-#ifdef CONFIG_NET_CLS_ROUTE
+#ifdef CONFIG_IP_ROUTE_CLASSID
 		rt->dst.tclassid = FIB_RES_NH(*res).nh_tclassid;
 #endif
 	} else
@@ -1847,7 +1847,7 @@ static void rt_set_nexthop(struct rtable *rt, struct fib_result *res, u32 itag)
 	if (dst_metric(&rt->dst, RTAX_ADVMSS) > 65535 - 40)
 		rt->dst.metrics[RTAX_ADVMSS-1] = 65535 - 40;
 
-#ifdef CONFIG_NET_CLS_ROUTE
+#ifdef CONFIG_IP_ROUTE_CLASSID
 #ifdef CONFIG_IP_MULTIPLE_TABLES
 	set_class_tag(rt, fib_rules_tclass(res));
 #endif
@@ -1903,7 +1903,7 @@ static int ip_route_input_mc(struct sk_buff *skb, __be32 daddr, __be32 saddr,
 	rth->fl.mark    = skb->mark;
 	rth->fl.fl4_src	= saddr;
 	rth->rt_src	= saddr;
-#ifdef CONFIG_NET_CLS_ROUTE
+#ifdef CONFIG_IP_ROUTE_CLASSID
 	rth->dst.tclassid = itag;
 #endif
 	rth->rt_iif	=
@@ -2224,7 +2224,7 @@ local_input:
 	rth->fl.mark    = skb->mark;
 	rth->fl.fl4_src	= saddr;
 	rth->rt_src	= saddr;
-#ifdef CONFIG_NET_CLS_ROUTE
+#ifdef CONFIG_IP_ROUTE_CLASSID
 	rth->dst.tclassid = itag;
 #endif
 	rth->rt_iif	=
@@ -2849,7 +2849,7 @@ static int rt_fill_info(struct net *net,
 	}
 	if (rt->dst.dev)
 		NLA_PUT_U32(skb, RTA_OIF, rt->dst.dev->ifindex);
-#ifdef CONFIG_NET_CLS_ROUTE
+#ifdef CONFIG_IP_ROUTE_CLASSID
 	if (rt->dst.tclassid)
 		NLA_PUT_U32(skb, RTA_FLOW, rt->dst.tclassid);
 #endif
@@ -3274,9 +3274,9 @@ static __net_initdata struct pernet_operations rt_genid_ops = {
 };
 
 
-#ifdef CONFIG_NET_CLS_ROUTE
+#ifdef CONFIG_IP_ROUTE_CLASSID
 struct ip_rt_acct __percpu *ip_rt_acct __read_mostly;
-#endif /* CONFIG_NET_CLS_ROUTE */
+#endif /* CONFIG_IP_ROUTE_CLASSID */
 
 static __initdata unsigned long rhash_entries;
 static int __init set_rhash_entries(char *str)
@@ -3292,7 +3292,7 @@ int __init ip_rt_init(void)
 {
 	int rc = 0;
 
-#ifdef CONFIG_NET_CLS_ROUTE
+#ifdef CONFIG_IP_ROUTE_CLASSID
 	ip_rt_acct = __alloc_percpu(256 * sizeof(struct ip_rt_acct), __alignof__(struct ip_rt_acct));
 	if (!ip_rt_acct)
 		panic("IP: failed to allocate ip_rt_acct\n");
diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig
index 1534f2b..1b79353 100644
--- a/net/netfilter/Kconfig
+++ b/net/netfilter/Kconfig
@@ -886,7 +886,7 @@ config NETFILTER_XT_MATCH_RATEEST
 config NETFILTER_XT_MATCH_REALM
 	tristate  '"realm" match support'
 	depends on NETFILTER_ADVANCED
-	select NET_CLS_ROUTE
+	select IP_ROUTE_CLASSID
 	help
 	  This option adds a `realm' match, which allows you to use the realm
 	  key from the routing subsystem inside iptables.
diff --git a/net/sched/Kconfig b/net/sched/Kconfig
index a36270a..4b753ef 100644
--- a/net/sched/Kconfig
+++ b/net/sched/Kconfig
@@ -243,7 +243,7 @@ config NET_CLS_TCINDEX
 
 config NET_CLS_ROUTE4
 	tristate "Routing decision (ROUTE)"
-	select NET_CLS_ROUTE
+	select IP_ROUTE_CLASSID
 	select NET_CLS
 	---help---
 	  If you say Y here, you will be able to classify packets
@@ -252,9 +252,6 @@ config NET_CLS_ROUTE4
 	  To compile this code as a module, choose M here: the
 	  module will be called cls_route.
 
-config NET_CLS_ROUTE
-	bool
-
 config NET_CLS_FW
 	tristate "Netfilter mark (FW)"
 	select NET_CLS
diff --git a/net/sched/cls_flow.c b/net/sched/cls_flow.c
index 5b271a1..a3b293d 100644
--- a/net/sched/cls_flow.c
+++ b/net/sched/cls_flow.c
@@ -276,7 +276,7 @@ fallback:
 
 static u32 flow_get_rtclassid(const struct sk_buff *skb)
 {
-#ifdef CONFIG_NET_CLS_ROUTE
+#ifdef CONFIG_IP_ROUTE_CLASSID
 	if (skb_dst(skb))
 		return skb_dst(skb)->tclassid;
 #endif
diff --git a/net/sched/em_meta.c b/net/sched/em_meta.c
index 34da5e2..0d66e58 100644
--- a/net/sched/em_meta.c
+++ b/net/sched/em_meta.c
@@ -255,7 +255,7 @@ META_COLLECTOR(int_rtclassid)
 	if (unlikely(skb_dst(skb) == NULL))
 		*err = -1;
 	else
-#ifdef CONFIG_NET_CLS_ROUTE
+#ifdef CONFIG_IP_ROUTE_CLASSID
 		dst->value = skb_dst(skb)->tclassid;
 #else
 		dst->value = 0;