From: Jiri Slaby <jirislaby@gmail.com>
To: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: linux-kernel@vger.kernel.org, akpm@linux-foundation.org,
mm-commits@vger.kernel.org, Antti Palosaari <crope@iki.fi>,
Greg KH <gregkh@suse.de>, USB list <linux-usb@vger.kernel.org>
Subject: Re: DVB: af9015 defunct [was: mmotm 2010-10-20-15-01 uploaded]
Date: Fri, 22 Oct 2010 16:06:38 +0200 [thread overview]
Message-ID: <4CC19A6E.8010909@gmail.com> (raw)
In-Reply-To: <4CC19804.1080109@redhat.com>
On 10/22/2010 03:56 PM, Mauro Carvalho Chehab wrote:
> --- a/drivers/media/dvb/dvb-usb/af9015.c
> +++ b/drivers/media/dvb/dvb-usb/af9015.c
> @@ -1144,7 +1144,7 @@ static struct qt1010_config af9015_qt1010_config = {
>
> static struct tda18271_config af9015_tda18271_config = {
> .gate = TDA18271_GATE_DIGITAL,
> - .small_i2c = 1,
> + .small_i2c = TDA18271_16_BYTE_CHUNK_INIT;,
No, it doesn't help (note the i2c line which prints the small_i2c entry):
dvb-usb: found a 'Leadtek WinFast DTV Dongle Gold' in cold state, will
try to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'
dvb-usb: found a 'Leadtek WinFast DTV Dongle Gold' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software
demuxer.
DVB: registering new adapter (Leadtek WinFast DTV Dongle Gold)
af9013: firmware version:4.95.0.0
DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)...
af9015_tuner_attach: i2c 16
tda18271 16-00c0: creating new instance
TDA18271HD/C2 detected @ 16-00c0
af9015: command failed:1
tda18271_write_regs: [16-00c0|M] ERROR: idx = 0x0, len = 39,
i2c_transfer returned: -1
af9015: command failed:1
tda18271_write_regs: [16-00c0|M] ERROR: idx = 0x20, len = 1,
i2c_transfer returned: -1
af9015: command failed:1
tda18271_write_regs: [16-00c0|M] ERROR: idx = 0x20, len = 1,
i2c_transfer returned: -1
af9015: command failed:1
tda18271_write_regs: [16-00c0|M] ERROR: idx = 0x20, len = 1,
i2c_transfer returned: -1
af9015: command failed:1
tda18271_write_regs: [16-00c0|M] ERROR: idx = 0x20, len = 1,
i2c_transfer returned: -1
af9015: command failed:1
tda18271_write_regs: [16-00c0|M] ERROR: idx = 0x5, len = 11,
i2c_transfer returned: -1
af9015: command failed:1
tda18271_write_regs: [16-00c0|M] ERROR: idx = 0x13, len = 1,
i2c_transfer returned: -1
af9015: command failed:1
tda18271_write_regs: [16-00c0|M] ERROR: idx = 0x13, len = 1,
i2c_transfer returned: -1
af9015: command failed:1
tda18271_write_regs: [16-00c0|M] ERROR: idx = 0x3, len = 1, i2c_transfer
returned: -1
af9015: command failed:1
tda18271_write_regs: [16-00c0|M] ERROR: idx = 0x5, len = 7, i2c_transfer
returned: -1
af9015: command failed:1
tda18271_write_regs: [16-00c0|M] ERROR: idx = 0x4, len = 1, i2c_transfer
returned: -1
af9015: command failed:1
tda18271_write_regs: [16-00c0|M] ERROR: idx = 0x5, len = 11,
i2c_transfer returned: -1
af9015: command failed:1
tda18271_write_regs: [16-00c0|M] ERROR: idx = 0x3, len = 1, i2c_transfer
returned: -1
af9015: command failed:1
tda18271_write_regs: [16-00c0|M] ERROR: idx = 0x5, len = 7, i2c_transfer
returned: -1
af9015: command failed:1
tda18271_write_regs: [16-00c0|M] ERROR: idx = 0x4, len = 1, i2c_transfer
returned: -1
af9015: command failed:1
tda18271_write_regs: [16-00c0|M] ERROR: idx = 0x5, len = 11,
i2c_transfer returned: -1
af9015: command failed:1
tda18271_write_regs: [16-00c0|M] ERROR: idx = 0x3, len = 1, i2c_transfer
returned: -1
af9015: command failed:1
tda18271_write_regs: [16-00c0|M] ERROR: idx = 0x5, len = 7, i2c_transfer
returned: -1
af9015: command failed:1
tda18271_write_regs: [16-00c0|M] ERROR: idx = 0x4, len = 1, i2c_transfer
returned: -1
af9015: command failed:1
tda18271_write_regs: [16-00c0|M] ERROR: idx = 0x6, len = 1, i2c_transfer
returned: -1
af9015: command failed:1
tda18271_write_regs: [16-00c0|M] ERROR: idx = 0x3, len = 1, i2c_transfer
returned: -1
dvb-usb: Leadtek WinFast DTV Dongle Gold successfully initialized and
connected.
usbcore: registered new interface driver dvb_usb_af9015
regards,
--
js
next prev parent reply other threads:[~2010-10-22 14:06 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-20 22:01 mmotm 2010-10-20-15-01 uploaded akpm
2010-10-21 2:54 ` Li Zefan
2010-10-21 3:15 ` Li Zefan
2010-10-21 3:38 ` Konrad Rzeszutek Wilk
2010-10-21 3:44 ` Li Zefan
2010-10-21 14:28 ` Konrad Rzeszutek Wilk
2010-10-21 3:46 ` Andrew Morton
2010-10-21 7:17 ` Peter Zijlstra
2010-10-21 7:30 ` Andrew Morton
2010-10-21 9:52 ` Peter Zijlstra
2010-10-21 9:54 ` Peter Zijlstra
2010-10-21 7:41 ` HDA: no sound [was: mmotm 2010-10-20-15-01 uploaded] Jiri Slaby
2010-10-21 7:49 ` Takashi Iwai
2010-10-21 7:57 ` Jiri Slaby
2010-10-21 8:05 ` Takashi Iwai
2010-10-21 18:27 ` Jiri Slaby
2010-10-21 19:20 ` Takashi Iwai
2010-10-21 19:21 ` Jiri Slaby
2010-10-21 19:22 ` Takashi Iwai
2010-10-21 19:40 ` Takashi Iwai
2010-10-21 20:29 ` Valdis.Kletnieks
2010-10-21 20:48 ` Takashi Iwai
2010-10-21 21:24 ` Valdis.Kletnieks
2010-10-21 21:31 ` Takashi Iwai
2010-10-21 21:42 ` Jiri Slaby
2010-10-22 8:46 ` Colin Guthrie
2010-10-22 9:02 ` Takashi Iwai
2010-10-22 9:18 ` Jiri Slaby
2010-10-22 9:40 ` Takashi Iwai
2010-10-22 9:45 ` Jiri Slaby
2010-10-22 10:26 ` Takashi Iwai
2010-10-22 11:10 ` Jiri Slaby
2010-10-22 9:41 ` Colin Guthrie
2010-10-22 11:31 ` [alsa-devel] " Clemens Ladisch
2010-10-22 11:51 ` Jiri Slaby
2010-10-22 14:03 ` Takashi Iwai
2010-10-22 19:53 ` Colin Guthrie
2010-10-21 15:22 ` Valdis.Kletnieks
2010-10-21 17:59 ` Jiri Slaby
2010-10-21 11:10 ` mmotm 2010-10-20-15-01 uploaded Zimny Lech
2010-10-21 11:14 ` mmotm 2010-10-20 - netfilter Kconfig whinge Valdis.Kletnieks
2010-10-29 19:11 ` Patrick McHardy
2010-10-21 17:51 ` DVB: af9015 defunct [was: mmotm 2010-10-20-15-01 uploaded] Jiri Slaby
2010-10-21 22:24 ` Jiri Slaby
2010-10-22 9:21 ` Jiri Slaby
2010-10-22 13:56 ` Mauro Carvalho Chehab
2010-10-22 14:06 ` Jiri Slaby [this message]
2010-10-27 16:12 ` Mauro Carvalho Chehab
2010-10-27 16:36 ` Jiri Slaby
2010-10-27 17:05 ` Mauro Carvalho Chehab
2010-10-27 16:41 ` Antti Palosaari
2010-10-27 17:11 ` Mauro Carvalho Chehab
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4CC19A6E.8010909@gmail.com \
--to=jirislaby@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=crope@iki.fi \
--cc=gregkh@suse.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mchehab@redhat.com \
--cc=mm-commits@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox