From: Jiri Slaby <jslaby@suse.cz>
To: Greg Kroah-Hartman <gregkh@suse.de>
Cc: linux-kernel@vger.kernel.org, "Dr. Werner Fink" <werner@suse.de>,
Alan Cox <alan@lxorguk.ukuu.org.uk>
Subject: Re: [PATCH 28/49] tty: Add a new file /proc/tty/consoles
Date: Sat, 23 Oct 2010 13:24:47 +0200 [thread overview]
Message-ID: <4CC2C5FF.5060008@suse.cz> (raw)
In-Reply-To: <1287771688-14805-28-git-send-email-gregkh@suse.de>
On 10/22/2010 08:21 PM, Greg Kroah-Hartman wrote:
> --- a/fs/proc/proc_tty.c
> +++ b/fs/proc/proc_tty.c
...
> @@ -137,6 +140,160 @@ static const struct file_operations proc_tty_drivers_operations = {
> };
>
> /*
> + * The device ID of file descriptor 0 of the current reading
> + * task if a character device...
> + */
> +static dev_t current_dev;
> +
> +/*
> + * This is the handler for /proc/tty/consoles
> + */
> +static int show_console_dev(struct seq_file *m, void *v)
> +{
> + const struct tty_driver *driver;
> + struct console *con;
> + int index, len;
> + char flags[10];
> + dev_t dev;
> +
> + if (v == SEQ_START_TOKEN)
> + return 0;
> + con = (struct console *)v;
You don't hold the console sem now, so the console may be already gone,
right? You should hold the sem from ->start till ->stop.
> + if (!con)
> + return 0;
> + driver = con->device(con, &index);
Some consoles, especially the early ones don't have con->device IIRC.
If, for some reason, they are not switched to proper ttyS* (e.g. the
port fails to init), this will crash.
> + if (!driver)
> + return 0;
> + dev = MKDEV(driver->major, driver->minor_start) + index;
> +
> + index = 0;
> + if (con->flags & CON_ENABLED)
> + flags[index++] = 'E';
> + if (con->flags & CON_CONSDEV)
> + flags[index++] = 'C';
> + if (con->flags & CON_BOOT)
> + flags[index++] = 'B';
> + if (con->flags & CON_PRINTBUFFER)
> + flags[index++] = 'p';
> + if (con->flags & CON_BRL)
> + flags[index++] = 'b';
> + if (con->flags & CON_ANYTIME)
> + flags[index++] = 'a';
> + if (current_dev == dev)
> + flags[index++] = '*';
> + flags[index] = 0;
> +
> + seq_printf(m, "%s%d%n", con->name, con->index, &len);
> + len = 21 - len;
> + if (len < 1)
> + len = 1;
> + seq_printf(m, "%*c", len, ' ');
> + seq_printf(m, "%c%c%c (%s)%n", con->read ? 'R' : '-',
> + con->write ? 'W' : '-', con->unblank ? 'U' : '-',
> + flags, &len);
> + len = 13 - len;
> + if (len < 1)
> + len = 1;
> + seq_printf(m, "%*c%4d:%d\n", len, ' ', MAJOR(dev), MINOR(dev));
> +
> + return 0;
> +}
regards,
--
js
suse labs
next prev parent reply other threads:[~2010-10-23 11:24 UTC|newest]
Thread overview: 71+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-22 17:51 [GIT PATCH] TTY/Serial merge for .37-rc1 Greg KH
2010-10-22 18:20 ` [PATCH 01/49] tty: add tty_struct->dev pointer to corresponding device instance Greg Kroah-Hartman
2010-10-22 18:20 ` [PATCH 02/49] serport: place serport serio device correctly in the device tree Greg Kroah-Hartman
2010-10-22 18:20 ` [PATCH 03/49] serial: mfd: snprintf() returns largish values Greg Kroah-Hartman
2010-10-22 18:20 ` [PATCH 04/49] serial: Add CONSOLE_POLL support for uartlite Greg Kroah-Hartman
2010-10-22 18:20 ` [PATCH 05/49] tty: Remove __GFP_NOFAIL from tty_add_file() Greg Kroah-Hartman
2010-10-22 18:20 ` [PATCH 06/49] ioctl: Use asm-generic/ioctls.h on arm (enables termiox) Greg Kroah-Hartman
2010-10-22 18:20 ` [PATCH 07/49] ioctl: Use asm-generic/ioctls.h on avr32 " Greg Kroah-Hartman
2010-10-22 18:20 ` [PATCH 08/49] ioctl: Use asm-generic/ioctls.h on cris " Greg Kroah-Hartman
2010-10-25 14:10 ` Jesper Nilsson
2010-10-22 18:20 ` [PATCH 09/49] ioctl: Use asm-generic/ioctls.h on frv " Greg Kroah-Hartman
2010-10-22 18:20 ` [PATCH 10/49] ioctl: Use asm-generic/ioctls.h on h8300 " Greg Kroah-Hartman
2010-10-22 18:20 ` [PATCH 11/49] ioctl: Use asm-generic/ioctls.h on ia64 " Greg Kroah-Hartman
2010-10-22 18:20 ` [PATCH 12/49] ioctl: Use asm-generic/ioctls.h on m32r " Greg Kroah-Hartman
2010-10-22 18:20 ` [PATCH 13/49] ioctl: Use asm-generic/ioctls.h on m68k " Greg Kroah-Hartman
2010-10-22 18:20 ` [PATCH 14/49] ioctl: Use asm-generic/ioctls.h on mn10300 " Greg Kroah-Hartman
2010-10-22 18:20 ` [PATCH 15/49] ioctl: Use asm-generic/ioctls.h on s390 " Greg Kroah-Hartman
2010-10-22 18:20 ` [PATCH 16/49] serial-core: skip call set_termios/console_start when no_console_suspend Greg Kroah-Hartman
2010-10-22 18:20 ` [PATCH 17/49] serial-core: restore termios settings when resume console ports Greg Kroah-Hartman
2010-10-22 18:20 ` [PATCH 18/49] add ttyprintk driver Greg Kroah-Hartman
2010-10-22 18:20 ` [PATCH 19/49] Char: mxser, call pci_disable_device from probe/remove Greg Kroah-Hartman
2010-10-22 18:20 ` [PATCH 20/49] tty_io: check return code of tty_register_device Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 21/49] serial: mrst_max3110: some code cleanup Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 22/49] serial: mrst_max3110: Make the IRQ option runtime Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 23/49] serial: max3107: Fix memory leaks when returning on error Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 24/49] tty: Make tiocgicount a handler Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 25/49] tty: Convert the USB drivers to the new icount interface Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 26/49] tty: icount changeover for other main devices Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 27/49] tty: Fix warning left over from TIOCGICOUNT changes Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 28/49] tty: Add a new file /proc/tty/consoles Greg Kroah-Hartman
2010-10-23 11:24 ` Jiri Slaby [this message]
2010-10-23 11:40 ` Jiri Slaby
2010-10-23 11:51 ` Al Viro
2010-10-23 12:00 ` Jiri Slaby
2010-10-23 12:26 ` Al Viro
2010-10-23 15:46 ` Greg KH
2010-10-23 16:53 ` Greg KH
2010-10-23 17:03 ` Greg KH
2010-10-23 12:04 ` Al Viro
2010-10-25 7:51 ` Dr. Werner Fink
2010-10-27 0:50 ` Al Viro
2010-10-27 9:27 ` Dr. Werner Fink
2010-10-27 9:51 ` Jiri Slaby
2010-10-27 11:31 ` Dr. Werner Fink
2010-10-23 11:46 ` Christoph Hellwig
2010-10-22 18:21 ` [PATCH 29/49] vcs: add poll/fasync support Greg Kroah-Hartman
2010-11-10 0:12 ` Kay Sievers
2010-11-10 1:26 ` Nicolas Pitre
2010-11-10 1:42 ` Kay Sievers
2010-11-10 6:33 ` Nicolas Pitre
2010-11-10 9:35 ` Kay Sievers
2010-10-22 18:21 ` [PATCH 30/49] vcs: invoke the vt update callback when /dev/vcs* is written to Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 31/49] tty: MAINTAINERS: add drivers/serial/jsm/ as maintained driver Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 32/49] serial: 8250: Don't delay after transmitter is ready Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 33/49] serial: mark the 8250 driver as maintained Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 34/49] serial: Factor out uart_poll_timeout() from 8250 driver Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 35/49] altera_uart: Add support for polling mode (IRQ-less) Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 36/49] altera_uart: Add support for getting mapbase and IRQ from resources Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 37/49] altera_uart: Add support for different address strides Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 38/49] altera_uart: Make it possible to use Altera UART and 8250 ports together Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 39/49] altera_uart: Fixup type usage of port flags Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 40/49] altera_uart: Fix missing prototype for registering an early console Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 41/49] altera_uart: Don't use plain integer as NULL pointer Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 42/49] 8250: allow platforms to override PM hook Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 43/49] Alchemy: Add UART PM methods Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 44/49] jsm: Remove the uart port on errors Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 45/49] serial: mfd: add more baud rates support Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 46/49] serial/imx: check that the buffer is non-empty before sending it out Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 47/49] serial: abstraction for 8250 legacy ports Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 48/49] serial: bfin_sport_uart: speed up sport RX sample rate to be 3% faster Greg Kroah-Hartman
2010-10-22 18:21 ` [PATCH 49/49] serial8250: ratelimit "too much work" error Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4CC2C5FF.5060008@suse.cz \
--to=jslaby@suse.cz \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=gregkh@suse.de \
--cc=linux-kernel@vger.kernel.org \
--cc=werner@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox