Re: [PATCH 6/6] ce4100: Add support for CE4100 EHCI IP block to EHCI driver

[Dirk Brandewie <dirk.brandewie@gmail.com>]

In a previous patch in this series GregKH asked that the PCI ID not be added 
to pci_ids.h for ID's that are only used by a single file.  
Here is an updated version of the EHCI controller patch.

Subject: [PATCH] ce4100: Add support for CE4100 EHCI IP block to EHCI driver

This patch adds support for the EHCI IP block present on the Intel
CE4100.

Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
CC: linux-usb@vger.kernel.org
CC: David Brownell <dbrownell@users.sourceforge.net>
---
 drivers/usb/host/ehci-pci.c |    4 ++++
 1 files changed, 4 insertions(+), 0 deletions(-)

diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index a1e8d27..da2b196 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -124,6 +124,10 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 			ehci_info(ehci, "disable lpm for langwell/penwell\n");
 			ehci->has_lpm = 0;
 		}
+		if (pdev->device == 0x2e70) {
+			hcd->has_tt = 1;
+			tdi_reset(ehci);
+		}
 		break;
 	case PCI_VENDOR_ID_TDI:
 		if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) {
-- 
1.7.2.3