* [PATCH] input: misc: add lis331dlh driver
@ 2010-11-11 11:58 mems applications
2010-11-11 13:03 ` Datta, Shubhrajyoti
0 siblings, 1 reply; 4+ messages in thread
From: mems applications @ 2010-11-11 11:58 UTC (permalink / raw)
To: dmitry.torokhov; +Cc: carmine.iascone, matteo.dameno, linux-input, linux-kernel
Add STMicroelectronics LIS331DLH digital accelerometer device driver
Signed-off-by: Carmine Iascone <carmine.iascone@st.com>
---
drivers/input/misc/Kconfig | 7 +
drivers/input/misc/Makefile | 2 +-
drivers/input/misc/lis331dlh.c | 836 ++++++++++++++++++++++++++++++++++++++++
drivers/input/misc/lis331dlh.h | 83 ++++
4 files changed, 927 insertions(+), 1 deletions(-)
create mode 100644 drivers/input/misc/lis331dlh.c
create mode 100644 drivers/input/misc/lis331dlh.h
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index b99b8cb..eb58bd3 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -448,4 +448,11 @@ config INPUT_ADXL34X_SPI
To compile this driver as a module, choose M here: the
module will be called adxl34x-spi.
+config INPUT_LIS331DLH
+ tristate "STMicroelectronics LIS331DLH Accelerometer"
+ depends on I2C
+ ---help---
+ If you say yes here you get support for the STMicroelectronics
+ LIS331DLH accelerometer sensor
+
endif
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 1fe1f6c..819e1a3 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_INPUT_DM355EVM) += dm355evm_keys.o
obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o
obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o
obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o
+obj-$(CONFIG_INPUT_LIS331DLH) += lis331dlh.o
obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o
obj-$(CONFIG_INPUT_MAX8925_ONKEY) += max8925_onkey.o
obj-$(CONFIG_INPUT_PCAP) += pcap_keys.o
@@ -42,4 +43,3 @@ obj-$(CONFIG_INPUT_WINBOND_CIR) += winbond-cir.o
obj-$(CONFIG_INPUT_WISTRON_BTNS) += wistron_btns.o
obj-$(CONFIG_INPUT_WM831X_ON) += wm831x-on.o
obj-$(CONFIG_INPUT_YEALINK) += yealink.o
-
diff --git a/drivers/input/misc/lis331dlh.c b/drivers/input/misc/lis331dlh.c
new file mode 100644
index 0000000..2b72c12
--- /dev/null
+++ b/drivers/input/misc/lis331dlh.c
@@ -0,0 +1,836 @@
+/******************** (C) COPYRIGHT 2010 STMicroelectronics ********************
+*
+* File Name : lis331dlh.c
+* Authors : MSH - Motion Mems BU - Application Team
+* : Carmine Iascone (carmine.iascone@st.com)
+* : Matteo Dameno (matteo.dameno@st.com)
+* Version : V 1.0.0
+* Date : 08/11/2010
+* Description : LIS331DLH sensor API
+*
+********************************************************************************
+*
+* This program is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License version 2 as
+* published by the Free Software Foundation.
+*
+* THE PRESENT SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES
+* OR CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED, FOR THE SOLE
+* PURPOSE TO SUPPORT YOUR APPLICATION DEVELOPMENT.
+* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+* CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+*
+* THIS SOFTWARE IS SPECIFICALLY DESIGNED FOR EXCLUSIVE USE WITH ST PARTS.
+*
+******************************************************************************/
+#include "lis331dlh.h"
+
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <linux/input-polldev.h>
+#include <linux/slab.h>
+
+
+#define LIS331DLH_DEV_NAME "lis331dlh"
+
+/** Maximum polled-device-reported g value */
+#define G_MAX 8000
+
+#define SHIFT_ADJ_2G 4
+#define SHIFT_ADJ_4G 3
+#define SHIFT_ADJ_8G 2
+
+#define AXISDATA_REG 0x28
+
+/* ctrl 1: pm2 pm1 pm0 dr1 dr0 zenable yenable zenable */
+#define CTRL_REG1 0x20 /* power control reg */
+#define CTRL_REG2 0x21 /* power control reg */
+#define CTRL_REG3 0x22 /* power control reg */
+#define CTRL_REG4 0x23 /* interrupt control reg */
+
+#define FUZZ 0
+#define FLAT 0
+#define I2C_RETRY_DELAY 5
+#define I2C_RETRIES 5
+#define AUTO_INCREMENT 0x80
+
+static struct {
+ unsigned int cutoff;
+ unsigned int mask;
+} odr_table[] = {
+ {
+ 3, LIS331DLH_PM_NORMAL | LIS331DLH_ODR1000}, {
+ 10, LIS331DLH_PM_NORMAL | LIS331DLH_ODR400}, {
+ 20, LIS331DLH_PM_NORMAL | LIS331DLH_ODR100}, {
+ 100, LIS331DLH_PM_NORMAL | LIS331DLH_ODR50}, {
+ 200, LIS331DLH_ODR1000 | LIS331DLH_ODR10}, {
+ 500, LIS331DLH_ODR1000 | LIS331DLH_ODR5}, {
+ 1000, LIS331DLH_ODR1000 | LIS331DLH_ODR2}, {
+ 2000, LIS331DLH_ODR1000 | LIS331DLH_ODR1}, {
+ 0, LIS331DLH_ODR1000 | LIS331DLH_ODRHALF},};
+
+struct lis331dlh_data {
+ struct i2c_client *client;
+ struct lis331dlh_platform_data *pdata;
+
+ struct mutex lock;
+
+ struct input_polled_dev *input_poll_dev;
+
+ int hw_initialized;
+ atomic_t enabled;
+ int on_before_suspend;
+
+ u8 reg_addr;
+
+ u8 shift_adj;
+ u8 resume_state[5];
+};
+
+/*
+ * Because misc devices can not carry a pointer from driver register to
+ * open, we keep this global. This limits the driver to a single instance.
+ */
+struct lis331dlh_data *lis331dlh_misc_data;
+
+static int lis331dlh_i2c_read(struct lis331dlh_data *acc,
+ u8 *buf, int len)
+{
+ int err;
+
+ struct i2c_msg msgs[] = {
+ {
+ .addr = acc->client->addr,
+ .flags = acc->client->flags & I2C_M_TEN,
+ .len = 1,
+ .buf = buf,
+ },
+ {
+ .addr = acc->client->addr,
+ .flags = (acc->client->flags & I2C_M_TEN) | I2C_M_RD,
+ .len = len,
+ .buf = buf,
+ },
+ };
+
+ err = i2c_transfer(acc->client->adapter, msgs, 2);
+
+ if (err != 2) {
+ dev_err(&acc->client->dev, "read transfer error\n");
+ err = -EIO;
+ } else {
+ err = 0;
+ }
+
+ return err;
+}
+
+static int lis331dlh_i2c_write(struct lis331dlh_data *acc,
+ u8 *buf, int len)
+{
+ int err;
+
+ struct i2c_msg msgs[] = {
+ {
+ .addr = acc->client->addr,
+ .flags = acc->client->flags & I2C_M_TEN,
+ .len = len + 1,
+ .buf = buf,
+ },
+ };
+
+ err = i2c_transfer(acc->client->adapter, msgs, 1);
+
+ if (err != 1) {
+ dev_err(&acc->client->dev, "write transfer error\n");
+ err = -EIO;
+ } else {
+ err = 0;
+ }
+
+ return err;
+}
+
+static int lis331dlh_hw_init(struct lis331dlh_data *acc)
+{
+ int err = -1;
+ u8 buf[6];
+
+ buf[0] = (AUTO_INCREMENT | CTRL_REG1);
+ buf[1] = acc->resume_state[0];
+ buf[2] = acc->resume_state[1];
+ buf[3] = acc->resume_state[2];
+ buf[4] = acc->resume_state[3];
+ buf[5] = acc->resume_state[4];
+ err = lis331dlh_i2c_write(acc, buf, 5);
+ if (err < 0)
+ return err;
+
+ acc->hw_initialized = 1;
+
+ return 0;
+}
+
+static void lis331dlh_device_power_off(struct lis331dlh_data *acc)
+{
+ int err;
+ u8 buf[2] = { CTRL_REG1,
+ LIS331DLH_PM_OFF | LIS331DLH_ENABLE_ALL_AXES };
+
+ err = lis331dlh_i2c_write(acc, buf, 1);
+ if (err < 0)
+ dev_err(&acc->client->dev, "soft power off failed\n");
+
+ if (acc->pdata->power_off)
+ acc->pdata->power_off();
+
+ acc->hw_initialized = 0;
+
+}
+
+static int lis331dlh_device_power_on(struct lis331dlh_data *acc)
+{
+ int err;
+
+ if (acc->pdata->power_on) {
+ err = acc->pdata->power_on();
+ if (err < 0)
+ return err;
+ }
+
+ if (!acc->hw_initialized) {
+ err = lis331dlh_hw_init(acc);
+ if (err < 0) {
+ lis331dlh_device_power_off(acc);
+ return err;
+ }
+ }
+
+ return 0;
+}
+
+int lis331dlh_update_g_range(struct lis331dlh_data *acc, u8 new_g_range)
+{
+ int err;
+ u8 shift;
+ u8 buf[2];
+ switch (new_g_range) {
+ case LIS331DLH_G_2G:
+ shift = SHIFT_ADJ_2G;
+ break;
+ case LIS331DLH_G_4G:
+ shift = SHIFT_ADJ_4G;
+ break;
+ case LIS331DLH_G_8G:
+ shift = SHIFT_ADJ_8G;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (atomic_read(&acc->enabled)) {
+ /* Set configuration register 4, which contains g range setting
+ * NOTE: this is a straight overwrite because this driver does
+ * not use any of the other configuration bits in this
+ * register. Should this become untrue, we will have to read
+ * out the value and only change the relevant bits --XX----
+ * (marked by X) */
+ buf[0] = CTRL_REG4;
+ buf[1] = new_g_range;
+ err = lis331dlh_i2c_write(acc, buf, 1);
+ if (err < 0)
+ return err;
+ }
+
+ acc->resume_state[3] = new_g_range;
+ acc->shift_adj = shift;
+
+ return 0;
+}
+
+int lis331dlh_update_odr(struct lis331dlh_data *acc, int poll_interval)
+{
+ int err = -1;
+ int i;
+ u8 config[2];
+
+ /* Convert the poll interval into an output data rate configuration
+ * that is as low as possible. The ordering of these checks must be
+ * maintained due to the cascading cut off values - poll intervals are
+ * checked from shortest to longest. At each check, if the next lower
+ * ODR cannot support the current poll interval, we stop searching */
+ for (i = 0; i < ARRAY_SIZE(odr_table); i++) {
+ config[1] = odr_table[i].mask;
+ if (poll_interval < odr_table[i].cutoff)
+ break;
+ }
+
+ config[1] |= LIS331DLH_ENABLE_ALL_AXES;
+
+ /* If device is currently enabled, we need to write new
+ * configuration out to it */
+ if (atomic_read(&acc->enabled)) {
+ config[0] = CTRL_REG1;
+ err = lis331dlh_i2c_write(acc, config, 1);
+ if (err < 0)
+ return err;
+ }
+
+ acc->resume_state[0] = config[1];
+
+ return 0;
+}
+
+static int decode(u8 *p, int adj)
+{
+ s16 v = p[0] | (p[1] << 8);
+ return (int) v >> adj;
+}
+
+static int lis331dlh_get_data(struct lis331dlh_data *acc,
+ int *xyz)
+{
+ int err = -1;
+ /* Data bytes from hardware xL, xH, yL, yH, zL, zH */
+ u8 acc_data[6];
+ /* x,y,z hardware data */
+ int hw_d[3] = { 0 };
+
+ acc_data[0] = (AUTO_INCREMENT | AXISDATA_REG);
+ err = lis331dlh_i2c_read(acc, acc_data, 6);
+ if (err < 0)
+ return err;
+
+ hw_d[0] = decode(acc_data, acc->shift_adj);
+ hw_d[1] = decode(acc_data + 2, acc->shift_adj);
+ hw_d[2] = decode(acc_data + 4, acc->shift_adj);
+
+ xyz[0] = ((acc->pdata->negate_x) ? (-hw_d[acc->pdata->axis_map_x])
+ : (hw_d[acc->pdata->axis_map_x]));
+ xyz[1] = ((acc->pdata->negate_y) ? (-hw_d[acc->pdata->axis_map_y])
+ : (hw_d[acc->pdata->axis_map_y]));
+ xyz[2] = ((acc->pdata->negate_z) ? (-hw_d[acc->pdata->axis_map_z])
+ : (hw_d[acc->pdata->axis_map_z]));
+
+ return err;
+}
+
+static void lis331dlh_report_values(struct lis331dlh_data *acc,
+ int *xyz)
+{
+ struct input_dev *input = acc->input_poll_dev->input;
+ input_report_abs(input, ABS_X, xyz[0]);
+ input_report_abs(input, ABS_Y, xyz[1]);
+ input_report_abs(input, ABS_Z, xyz[2]);
+ input_sync(input);
+}
+
+static int lis331dlh_enable(struct lis331dlh_data *acc)
+{
+ int err;
+
+ if (!atomic_cmpxchg(&acc->enabled, 0, 1)) {
+
+ err = lis331dlh_device_power_on(acc);
+ if (err < 0) {
+ atomic_set(&acc->enabled, 0);
+ return err;
+ }
+ }
+
+ return 0;
+}
+
+static int lis331dlh_disable(struct lis331dlh_data *acc)
+{
+ if (atomic_cmpxchg(&acc->enabled, 1, 0))
+ lis331dlh_device_power_off(acc);
+
+ return 0;
+}
+
+static ssize_t attr_get_polling_rate(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct lis331dlh_data *acc = dev_get_drvdata(dev);
+ int val;
+ mutex_lock(&acc->lock);
+ val = acc->pdata->poll_interval;
+ mutex_unlock(&acc->lock);
+ return sprintf(buf, "%d\n", val);
+}
+
+static ssize_t attr_set_polling_rate(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t size)
+{
+ struct lis331dlh_data *acc = dev_get_drvdata(dev);
+ unsigned long interval_ms;
+
+ if (strict_strtoul(buf, 10, &interval_ms))
+ return -EINVAL;
+ if (!interval_ms)
+ return -EINVAL;
+ mutex_lock(&acc->lock);
+ acc->pdata->poll_interval = interval_ms;
+ lis331dlh_update_odr(acc, interval_ms);
+ mutex_unlock(&acc->lock);
+ return size;
+}
+
+static ssize_t attr_get_range(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct lis331dlh_data *acc = dev_get_drvdata(dev);
+ char range;
+ char val;
+ mutex_lock(&acc->lock);
+ val = acc->pdata->g_range ;
+ switch (val) {
+ case LIS331DLH_G_2G:
+ range = 2;
+ break;
+ case LIS331DLH_G_4G:
+ range = 4;
+ break;
+ case LIS331DLH_G_8G:
+ range = 8;
+ break;
+ default:
+ range = 2;
+ break;
+ }
+ mutex_unlock(&acc->lock);
+ return sprintf(buf, "%d\n", range);
+}
+
+static ssize_t attr_set_range(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t size)
+{
+ struct lis331dlh_data *acc = dev_get_drvdata(dev);
+ unsigned long val;
+ if (strict_strtoul(buf, 10, &val))
+ return -EINVAL;
+ mutex_lock(&acc->lock);
+ acc->pdata->g_range = val;
+ lis331dlh_update_g_range(acc, val);
+ mutex_unlock(&acc->lock);
+ return size;
+}
+
+static ssize_t attr_get_enable(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct lis331dlh_data *acc = dev_get_drvdata(dev);
+ int val = atomic_read(&acc->enabled);
+ return sprintf(buf, "%d\n", val);
+}
+
+static ssize_t attr_set_enable(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t size)
+{
+ struct lis331dlh_data *acc = dev_get_drvdata(dev);
+ unsigned long val;
+
+ if (strict_strtoul(buf, 10, &val))
+ return -EINVAL;
+
+ if (val)
+ lis331dlh_enable(acc);
+ else
+ lis331dlh_disable(acc);
+
+ return size;
+}
+
+static ssize_t attr_reg_set(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t size)
+{
+ int rc;
+ struct lis331dlh_data *acc = dev_get_drvdata(dev);
+ u8 x[2];
+ unsigned long val;
+
+ if (strict_strtoul(buf, 16, &val))
+ return -EINVAL;
+ mutex_lock(&acc->lock);
+ x[0] = acc->reg_addr;
+ mutex_unlock(&acc->lock);
+ x[1] = val;
+ rc = lis331dlh_i2c_write(acc, x, 1);
+ return size;
+}
+
+static ssize_t attr_reg_get(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ ssize_t ret;
+ struct lis331dlh_data *acc = dev_get_drvdata(dev);
+ int rc;
+ u8 data;
+
+ mutex_lock(&acc->lock);
+ data = acc->reg_addr;
+ mutex_unlock(&acc->lock);
+ rc = lis331dlh_i2c_read(acc, &data, 1);
+ ret = sprintf(buf, "0x%02x\n", data);
+ return ret;
+}
+
+static ssize_t attr_addr_set(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t size)
+{
+ struct lis331dlh_data *acc = dev_get_drvdata(dev);
+ unsigned long val;
+ if (strict_strtoul(buf, 16, &val))
+ return -EINVAL;
+ mutex_lock(&acc->lock);
+ acc->reg_addr = val;
+ mutex_unlock(&acc->lock);
+ return size;
+}
+
+static struct device_attribute attributes[] = {
+ __ATTR(pollrate_ms, 0666, attr_get_polling_rate, attr_set_polling_rate),
+ __ATTR(range, 0666, attr_get_range, attr_set_range),
+ __ATTR(enable, 0666, attr_get_enable, attr_set_enable),
+ __ATTR(reg_value, 0600, attr_reg_get, attr_reg_set),
+ __ATTR(reg_addr, 0200, NULL, attr_addr_set),
+};
+
+static int create_sysfs_interfaces(struct device *dev)
+{
+ int i;
+ for (i = 0; i < ARRAY_SIZE(attributes); i++)
+ if (device_create_file(dev, attributes + i))
+ goto error;
+ return 0;
+
+error:
+ for ( ; i >= 0; i--)
+ device_remove_file(dev, attributes + i);
+ dev_err(dev, "%s:Unable to create interface\n", __func__);
+ return -1;
+}
+
+static int remove_sysfs_interfaces(struct device *dev)
+{
+ int i;
+ for (i = 0; i < ARRAY_SIZE(attributes); i++)
+ device_remove_file(dev, attributes + i);
+ return 0;
+}
+
+
+static void lis331dlh_input_poll_func(struct input_polled_dev *dev)
+{
+ struct lis331dlh_data *acc = dev->private;
+
+ int xyz[3] = { 0 };
+ int err;
+
+ /* acc = container_of((struct delayed_work *)work,
+ struct lis331dlh_data, input_work); */
+
+ mutex_lock(&acc->lock);
+ err = lis331dlh_get_data(acc, xyz);
+ if (err < 0)
+ dev_err(&acc->client->dev, "get_acceleration_data failed\n");
+ else
+ lis331dlh_report_values(acc, xyz);
+
+ mutex_unlock(&acc->lock);
+}
+
+int lis331dlh_input_open(struct input_dev *input)
+{
+ struct lis331dlh_data *acc = input_get_drvdata(input);
+
+ return lis331dlh_enable(acc);
+}
+
+void lis331dlh_input_close(struct input_dev *dev)
+{
+ struct lis331dlh_data *acc = input_get_drvdata(dev);
+
+ lis331dlh_disable(acc);
+}
+
+static int lis331dlh_validate_pdata(struct lis331dlh_data *acc)
+{
+ acc->pdata->poll_interval = max(acc->pdata->poll_interval,
+ acc->pdata->min_interval);
+
+ if (acc->pdata->axis_map_x > 2 ||
+ acc->pdata->axis_map_y > 2 || acc->pdata->axis_map_z > 2) {
+ dev_err(&acc->client->dev,
+ "invalid axis_map value x:%u y:%u z%u\n",
+ acc->pdata->axis_map_x, acc->pdata->axis_map_y,
+ acc->pdata->axis_map_z);
+ return -EINVAL;
+ }
+
+ /* Only allow 0 and 1 for negation boolean flag */
+ if (acc->pdata->negate_x > 1 || acc->pdata->negate_y > 1 ||
+ acc->pdata->negate_z > 1) {
+ dev_err(&acc->client->dev,
+ "invalid negate value x:%u y:%u z:%u\n",
+ acc->pdata->negate_x, acc->pdata->negate_y,
+ acc->pdata->negate_z);
+ return -EINVAL;
+ }
+
+ /* Enforce minimum polling interval */
+ if (acc->pdata->poll_interval < acc->pdata->min_interval) {
+ dev_err(&acc->client->dev, "minimum poll interval violated\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int lis331dlh_input_init(struct lis331dlh_data *acc)
+{
+ int err;
+ struct input_dev *input;
+
+ acc->input_poll_dev = input_allocate_polled_device();
+ if (!acc->input_poll_dev) {
+ err = -ENOMEM;
+ dev_err(&acc->client->dev, "input device allocate failed\n");
+ goto err0;
+ }
+
+ /* set input-polldev handlers */
+ acc->input_poll_dev->private = acc;
+ acc->input_poll_dev->poll = lis331dlh_input_poll_func;
+ acc->input_poll_dev->poll_interval = acc->pdata->poll_interval;
+
+ input = acc->input_poll_dev->input;
+
+ input->open = lis331dlh_input_open;
+ input->close = lis331dlh_input_close;
+ input->name = LIS331DLH_DEV_NAME;
+ input->id.bustype = BUS_I2C;
+ input->dev.parent = &acc->client->dev;
+
+ input_set_drvdata(acc->input_poll_dev->input, acc);
+
+ set_bit(EV_ABS, input->evbit);
+
+ input_set_abs_params(input, ABS_X, -G_MAX, G_MAX, FUZZ, FLAT);
+ input_set_abs_params(input, ABS_Y, -G_MAX, G_MAX, FUZZ, FLAT);
+ input_set_abs_params(input, ABS_Z, -G_MAX, G_MAX, FUZZ, FLAT);
+
+ input->name = "accelerometer";
+
+ err = input_register_polled_device(acc->input_poll_dev);
+ if (err) {
+ dev_err(&acc->client->dev,
+ "unable to register input polled device %s\n",
+ acc->input_poll_dev->input->name);
+ goto err1;
+ }
+
+ return 0;
+
+err1:
+ input_free_polled_device(acc->input_poll_dev);
+err0:
+ return err;
+}
+
+static void lis331dlh_input_cleanup(struct lis331dlh_data *acc)
+{
+ input_unregister_polled_device(acc->input_poll_dev);
+ input_free_polled_device(acc->input_poll_dev);
+}
+
+static int lis331dlh_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct lis331dlh_data *acc;
+ int err = -1;
+
+ if (client->dev.platform_data == NULL) {
+ dev_err(&client->dev, "platform data is NULL. exiting.\n");
+ err = -ENODEV;
+ goto err0;
+ }
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+ dev_err(&client->dev, "client not i2c capable\n");
+ err = -ENODEV;
+ goto err0;
+ }
+
+ acc = kzalloc(sizeof(*acc), GFP_KERNEL);
+ if (acc == NULL) {
+ dev_err(&client->dev,
+ "failed to allocate memory for module data\n");
+ err = -ENOMEM;
+ goto err0;
+ }
+
+ mutex_init(&acc->lock);
+ mutex_lock(&acc->lock);
+ acc->client = client;
+
+ acc->pdata = kmalloc(sizeof(*acc->pdata), GFP_KERNEL);
+ if (acc->pdata == NULL)
+ goto err1;
+
+ memcpy(acc->pdata, client->dev.platform_data, sizeof(*acc->pdata));
+
+ err = lis331dlh_validate_pdata(acc);
+ if (err < 0) {
+ dev_err(&client->dev, "failed to validate platform data\n");
+ goto err1_1;
+ }
+
+ i2c_set_clientdata(client, acc);
+
+ if (acc->pdata->init) {
+ err = acc->pdata->init();
+ if (err < 0)
+ goto err1_1;
+ }
+
+ memset(acc->resume_state, 0, ARRAY_SIZE(acc->resume_state));
+
+ acc->resume_state[0] = 0x27;
+ acc->resume_state[1] = 0x00;
+ acc->resume_state[2] = 0x00;
+ acc->resume_state[3] = 0x00;
+ acc->resume_state[4] = 0x00;
+
+ err = lis331dlh_device_power_on(acc);
+ if (err < 0)
+ goto err2;
+
+ atomic_set(&acc->enabled, 1);
+
+ err = lis331dlh_update_g_range(acc, acc->pdata->g_range);
+ if (err < 0) {
+ dev_err(&client->dev, "update_g_range failed\n");
+ goto err2;
+ }
+
+ err = lis331dlh_update_odr(acc, acc->pdata->poll_interval);
+ if (err < 0) {
+ dev_err(&client->dev, "update_odr failed\n");
+ goto err2;
+ }
+
+ err = lis331dlh_input_init(acc);
+ if (err < 0)
+ goto err3;
+
+ err = create_sysfs_interfaces(&client->dev);
+ if (err < 0) {
+ dev_err(&client->dev, "lsm_acc_device register failed\n");
+ goto err4;
+ }
+
+ lis331dlh_device_power_off(acc);
+
+ /* As default, do not report information */
+ atomic_set(&acc->enabled, 0);
+
+ mutex_unlock(&acc->lock);
+
+ dev_info(&client->dev, "lis331dlh probed\n");
+
+ return 0;
+
+err4:
+ lis331dlh_input_cleanup(acc);
+err3:
+ lis331dlh_device_power_off(acc);
+err2:
+ if (acc->pdata->exit)
+ acc->pdata->exit();
+err1_1:
+ mutex_unlock(&acc->lock);
+ kfree(acc->pdata);
+err1:
+ kfree(acc);
+err0:
+ return err;
+}
+
+static int __devexit lis331dlh_remove(struct i2c_client *client)
+{
+ /* TODO: revisit ordering here once _probe order is finalized */
+ struct lis331dlh_data *acc = i2c_get_clientdata(client);
+ lis331dlh_input_cleanup(acc);
+ lis331dlh_device_power_off(acc);
+ remove_sysfs_interfaces(&client->dev);
+ if (acc->pdata->exit)
+ acc->pdata->exit();
+ kfree(acc->pdata);
+ kfree(acc);
+
+ return 0;
+}
+
+static int lis331dlh_resume(struct i2c_client *client)
+{
+ struct lis331dlh_data *acc = i2c_get_clientdata(client);
+
+ if (acc->on_before_suspend)
+ return lis331dlh_enable(acc);
+ return 0;
+}
+
+static int lis331dlh_suspend(struct i2c_client *client, pm_message_t mesg)
+{
+ struct lis331dlh_data *acc = i2c_get_clientdata(client);
+
+ acc->on_before_suspend = atomic_read(&acc->enabled);
+ return lis331dlh_disable(acc);
+}
+
+static const struct i2c_device_id lis331dlh_id[] = {
+ {LIS331DLH_DEV_NAME, 0},
+ {},
+};
+
+MODULE_DEVICE_TABLE(i2c, lis331dlh_id);
+
+static struct i2c_driver lis331dlh_driver = {
+ .driver = {
+ .name = LIS331DLH_DEV_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = lis331dlh_probe,
+ .remove = __devexit_p(lis331dlh_remove),
+ .resume = lis331dlh_resume,
+ .suspend = lis331dlh_suspend,
+ .id_table = lis331dlh_id,
+};
+
+static int __init lis331dlh_init(void)
+{
+ pr_debug("LIS331DLH driver for the accelerometer part\n");
+ return i2c_add_driver(&lis331dlh_driver);
+}
+
+static void __exit lis331dlh_exit(void)
+{
+ i2c_del_driver(&lis331dlh_driver);
+ return;
+}
+
+module_init(lis331dlh_init);
+module_exit(lis331dlh_exit);
+
+MODULE_DESCRIPTION("lis331dlh accelerometer driver");
+MODULE_AUTHOR("STMicroelectronics");
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/input/misc/lis331dlh.h b/drivers/input/misc/lis331dlh.h
new file mode 100644
index 0000000..4ea008a
--- /dev/null
+++ b/drivers/input/misc/lis331dlh.h
@@ -0,0 +1,83 @@
+/******************** (C) COPYRIGHT 2010 STMicroelectronics ********************
+*
+* File Name : lis331dlh.h
+* Authors : MSH - Motion Mems BU - Application Team
+* : Carmine Iascone (carmine.iascone@st.com)
+* : Matteo Dameno (matteo.dameno@st.com)
+* Version : V 1.0.0
+* Date : 08/11/2010
+* Description : LIS331DLH sensor API
+*
+********************************************************************************
+*
+* This program is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License version 2 as
+* published by the Free Software Foundation.
+*
+* THE PRESENT SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES
+* OR CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED, FOR THE SOLE
+* PURPOSE TO SUPPORT YOUR APPLICATION DEVELOPMENT.
+* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+* CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+*
+* THIS SOFTWARE IS SPECIFICALLY DESIGNED FOR EXCLUSIVE USE WITH ST PARTS.
+*
+*******************************************************************************/
+
+#ifndef __LIS331DLH_H__
+#define __LIS331DLH_H__
+
+#include <linux/types.h>
+
+/************************************************/
+/* Accelerometer section defines */
+/************************************************/
+
+/* Accelerometer Sensor Full Scale */
+#define LIS331DLH_G_2G 0x00
+#define LIS331DLH_G_4G 0x10
+#define LIS331DLH_G_8G 0x30
+
+/* Accelerometer Sensor Operating Mode */
+#define LIS331DLH_PM_OFF 0x00
+#define LIS331DLH_PM_NORMAL 0x20
+#define LIS331DLH_ENABLE_ALL_AXES 0x07
+
+/* Accelerometer output data rate */
+#define LIS331DLH_ODRHALF 0x40 /* 0.5Hz output data rate */
+#define LIS331DLH_ODR1 0x60 /* 1Hz output data rate */
+#define LIS331DLH_ODR2 0x80 /* 2Hz output data rate */
+#define LIS331DLH_ODR5 0xA0 /* 5Hz output data rate */
+#define LIS331DLH_ODR10 0xC0 /* 10Hz output data rate */
+#define LIS331DLH_ODR50 0x00 /* 50Hz output data rate */
+#define LIS331DLH_ODR100 0x08 /* 100Hz output data rate */
+#define LIS331DLH_ODR400 0x10 /* 400Hz output data rate */
+#define LIS331DLH_ODR1000 0x18 /* 1000Hz output data rate */
+
+#ifdef __KERNEL__
+struct lis331dlh_platform_data {
+
+ int poll_interval;
+ int min_interval;
+
+ u8 g_range;
+
+ u8 axis_map_x;
+ u8 axis_map_y;
+ u8 axis_map_z;
+
+ u8 negate_x;
+ u8 negate_y;
+ u8 negate_z;
+
+ int (*init)(void);
+ void (*exit)(void);
+ int (*power_on)(void);
+ int (*power_off)(void);
+
+};
+#endif /* __KERNEL__ */
+
+#endif /* __LIS331DLH_H__ */
--
1.5.4.3
^ permalink raw reply related [flat|nested] 4+ messages in thread
* RE: [PATCH] input: misc: add lis331dlh driver
2010-11-11 11:58 [PATCH] input: misc: add lis331dlh driver mems applications
@ 2010-11-11 13:03 ` Datta, Shubhrajyoti
2010-11-18 15:51 ` Carmine IASCONE
2010-11-18 19:08 ` Jonathan Cameron
0 siblings, 2 replies; 4+ messages in thread
From: Datta, Shubhrajyoti @ 2010-11-11 13:03 UTC (permalink / raw)
To: mems applications, dmitry.torokhov@gmail.com
Cc: carmine.iascone@st.com, matteo.dameno@st.com,
linux-input@vger.kernel.org, linux-kernel@vger.kernel.org
> -----Original Message-----
> From: linux-input-owner@vger.kernel.org [mailto:linux-input-
> owner@vger.kernel.org] On Behalf Of mems applications
> Sent: Thursday, November 11, 2010 5:28 PM
> To: dmitry.torokhov@gmail.com
> Cc: carmine.iascone@st.com; matteo.dameno@st.com; linux-
> input@vger.kernel.org; linux-kernel@vger.kernel.org
> Subject: [PATCH] input: misc: add lis331dlh driver
>
> Add STMicroelectronics LIS331DLH digital accelerometer device driver
>
> Signed-off-by: Carmine Iascone <carmine.iascone@st.com>
> ---
> drivers/input/misc/Kconfig | 7 +
> drivers/input/misc/Makefile | 2 +-
> drivers/input/misc/lis331dlh.c | 836
> ++++++++++++++++++++++++++++++++++++++++
> drivers/input/misc/lis331dlh.h | 83 ++++
> 4 files changed, 927 insertions(+), 1 deletions(-)
> create mode 100644 drivers/input/misc/lis331dlh.c
> create mode 100644 drivers/input/misc/lis331dlh.h
>
> diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
> index b99b8cb..eb58bd3 100644
> --- a/drivers/input/misc/Kconfig
> +++ b/drivers/input/misc/Kconfig
> @@ -448,4 +448,11 @@ config INPUT_ADXL34X_SPI
> To compile this driver as a module, choose M here: the
> module will be called adxl34x-spi.
>
> +config INPUT_LIS331DLH
> + tristate "STMicroelectronics LIS331DLH Accelerometer"
> + depends on I2C
> + ---help---
> + If you say yes here you get support for the STMicroelectronics
> + LIS331DLH accelerometer sensor
> +
> endif
> diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
> index 1fe1f6c..819e1a3 100644
> --- a/drivers/input/misc/Makefile
> +++ b/drivers/input/misc/Makefile
> @@ -23,6 +23,7 @@ obj-$(CONFIG_INPUT_DM355EVM) += dm355evm_keys.o
> obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o
> obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o
> obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o
> +obj-$(CONFIG_INPUT_LIS331DLH) += lis331dlh.o
> obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o
> obj-$(CONFIG_INPUT_MAX8925_ONKEY) += max8925_onkey.o
> obj-$(CONFIG_INPUT_PCAP) += pcap_keys.o
> @@ -42,4 +43,3 @@ obj-$(CONFIG_INPUT_WINBOND_CIR) += winbond-
> cir.o
> obj-$(CONFIG_INPUT_WISTRON_BTNS) += wistron_btns.o
> obj-$(CONFIG_INPUT_WM831X_ON) += wm831x-on.o
> obj-$(CONFIG_INPUT_YEALINK) += yealink.o
> -
> diff --git a/drivers/input/misc/lis331dlh.c
> b/drivers/input/misc/lis331dlh.c
> new file mode 100644
> index 0000000..2b72c12
> --- /dev/null
> +++ b/drivers/input/misc/lis331dlh.c
> @@ -0,0 +1,836 @@
> +/******************** (C) COPYRIGHT 2010 STMicroelectronics
> ********************
> +*
> +* File Name : lis331dlh.c
> +* Authors : MSH - Motion Mems BU - Application Team
> +* : Carmine Iascone (carmine.iascone@st.com)
> +* : Matteo Dameno (matteo.dameno@st.com)
> +* Version : V 1.0.0
> +* Date : 08/11/2010
> +* Description : LIS331DLH sensor API
> +*
> +*************************************************************************
> *******
> +*
> +* This program is free software; you can redistribute it and/or modify
> +* it under the terms of the GNU General Public License version 2 as
> +* published by the Free Software Foundation.
> +*
> +* THE PRESENT SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT
> WARRANTIES
> +* OR CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED, FOR THE SOLE
> +* PURPOSE TO SUPPORT YOUR APPLICATION DEVELOPMENT.
> +* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
> DIRECT,
> +* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
> FROM THE
> +* CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
> +* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
> +*
> +* THIS SOFTWARE IS SPECIFICALLY DESIGNED FOR EXCLUSIVE USE WITH ST PARTS.
> +*
> +*************************************************************************
> *****/
> +#include "lis331dlh.h"
> +
> +#include <linux/i2c.h>
> +#include <linux/mutex.h>
> +#include <linux/input-polldev.h>
> +#include <linux/slab.h>
> +
> +
> +#define LIS331DLH_DEV_NAME "lis331dlh"
> +
> +/** Maximum polled-device-reported g value */
> +#define G_MAX 8000
> +
> +#define SHIFT_ADJ_2G 4
> +#define SHIFT_ADJ_4G 3
> +#define SHIFT_ADJ_8G 2
> +
> +#define AXISDATA_REG 0x28
> +
> +/* ctrl 1: pm2 pm1 pm0 dr1 dr0 zenable yenable zenable */
> +#define CTRL_REG1 0x20 /* power control reg */
> +#define CTRL_REG2 0x21 /* power control reg */
> +#define CTRL_REG3 0x22 /* power control reg */
> +#define CTRL_REG4 0x23 /* interrupt control reg */
> +
> +#define FUZZ 0
> +#define FLAT 0
> +#define I2C_RETRY_DELAY 5
> +#define I2C_RETRIES 5
> +#define AUTO_INCREMENT 0x80
> +
> +static struct {
> + unsigned int cutoff;
> + unsigned int mask;
> +} odr_table[] = {
> + {
> + 3, LIS331DLH_PM_NORMAL | LIS331DLH_ODR1000}, {
> + 10, LIS331DLH_PM_NORMAL | LIS331DLH_ODR400}, {
> + 20, LIS331DLH_PM_NORMAL | LIS331DLH_ODR100}, {
> + 100, LIS331DLH_PM_NORMAL | LIS331DLH_ODR50}, {
> + 200, LIS331DLH_ODR1000 | LIS331DLH_ODR10}, {
> + 500, LIS331DLH_ODR1000 | LIS331DLH_ODR5}, {
> + 1000, LIS331DLH_ODR1000 | LIS331DLH_ODR2}, {
> + 2000, LIS331DLH_ODR1000 | LIS331DLH_ODR1}, {
> + 0, LIS331DLH_ODR1000 | LIS331DLH_ODRHALF},};
> +
> +struct lis331dlh_data {
> + struct i2c_client *client;
> + struct lis331dlh_platform_data *pdata;
> +
> + struct mutex lock;
> +
> + struct input_polled_dev *input_poll_dev;
> +
> + int hw_initialized;
> + atomic_t enabled;
> + int on_before_suspend;
> +
> + u8 reg_addr;
> +
> + u8 shift_adj;
> + u8 resume_state[5];
> +};
> +
> +/*
> + * Because misc devices can not carry a pointer from driver register to
> + * open, we keep this global. This limits the driver to a single
> instance.
> + */
> +struct lis331dlh_data *lis331dlh_misc_data;
> +
> +static int lis331dlh_i2c_read(struct lis331dlh_data *acc,
> + u8 *buf, int len)
> +{
> + int err;
> +
> + struct i2c_msg msgs[] = {
> + {
> + .addr = acc->client->addr,
> + .flags = acc->client->flags & I2C_M_TEN,
> + .len = 1,
> + .buf = buf,
> + },
> + {
> + .addr = acc->client->addr,
> + .flags = (acc->client->flags & I2C_M_TEN) | I2C_M_RD,
> + .len = len,
> + .buf = buf,
> + },
> + };
> +
> + err = i2c_transfer(acc->client->adapter, msgs, 2);
> +
> + if (err != 2) {
> + dev_err(&acc->client->dev, "read transfer error\n");
> + err = -EIO;
> + } else {
> + err = 0;
> + }
> +
> + return err;
> +}
> +
> +static int lis331dlh_i2c_write(struct lis331dlh_data *acc,
> + u8 *buf, int len)
> +{
> + int err;
> +
> + struct i2c_msg msgs[] = {
> + {
> + .addr = acc->client->addr,
> + .flags = acc->client->flags & I2C_M_TEN,
> + .len = len + 1,
> + .buf = buf,
> + },
> + };
> +
> + err = i2c_transfer(acc->client->adapter, msgs, 1);
> +
> + if (err != 1) {
> + dev_err(&acc->client->dev, "write transfer error\n");
> + err = -EIO;
> + } else {
> + err = 0;
> + }
> +
> + return err;
> +}
> +
> +static int lis331dlh_hw_init(struct lis331dlh_data *acc)
> +{
> + int err = -1;
> + u8 buf[6];
> +
> + buf[0] = (AUTO_INCREMENT | CTRL_REG1);
> + buf[1] = acc->resume_state[0];
> + buf[2] = acc->resume_state[1];
> + buf[3] = acc->resume_state[2];
> + buf[4] = acc->resume_state[3];
> + buf[5] = acc->resume_state[4];
> + err = lis331dlh_i2c_write(acc, buf, 5);
> + if (err < 0)
> + return err;
> +
> + acc->hw_initialized = 1;
> +
> + return 0;
> +}
> +
> +static void lis331dlh_device_power_off(struct lis331dlh_data *acc)
> +{
> + int err;
> + u8 buf[2] = { CTRL_REG1,
> + LIS331DLH_PM_OFF | LIS331DLH_ENABLE_ALL_AXES };
> +
> + err = lis331dlh_i2c_write(acc, buf, 1);
> + if (err < 0)
> + dev_err(&acc->client->dev, "soft power off failed\n");
> +
> + if (acc->pdata->power_off)
> + acc->pdata->power_off();
> +
> + acc->hw_initialized = 0;
> +
> +}
> +
> +static int lis331dlh_device_power_on(struct lis331dlh_data *acc)
> +{
> + int err;
> +
> + if (acc->pdata->power_on) {
> + err = acc->pdata->power_on();
> + if (err < 0)
> + return err;
> + }
> +
> + if (!acc->hw_initialized) {
> + err = lis331dlh_hw_init(acc);
> + if (err < 0) {
> + lis331dlh_device_power_off(acc);
> + return err;
> + }
> + }
> +
> + return 0;
> +}
> +
> +int lis331dlh_update_g_range(struct lis331dlh_data *acc, u8 new_g_range)
> +{
> + int err;
> + u8 shift;
> + u8 buf[2];
> + switch (new_g_range) {
> + case LIS331DLH_G_2G:
> + shift = SHIFT_ADJ_2G;
> + break;
> + case LIS331DLH_G_4G:
> + shift = SHIFT_ADJ_4G;
> + break;
> + case LIS331DLH_G_8G:
> + shift = SHIFT_ADJ_8G;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + if (atomic_read(&acc->enabled)) {
> + /* Set configuration register 4, which contains g range
> setting
> + * NOTE: this is a straight overwrite because this driver
> does
> + * not use any of the other configuration bits in this
> + * register. Should this become untrue, we will have to read
> + * out the value and only change the relevant bits --XX----
> + * (marked by X) */
> + buf[0] = CTRL_REG4;
> + buf[1] = new_g_range;
> + err = lis331dlh_i2c_write(acc, buf, 1);
> + if (err < 0)
> + return err;
> + }
> +
> + acc->resume_state[3] = new_g_range;
> + acc->shift_adj = shift;
> +
> + return 0;
> +}
> +
> +int lis331dlh_update_odr(struct lis331dlh_data *acc, int poll_interval)
> +{
> + int err = -1;
> + int i;
> + u8 config[2];
> +
> + /* Convert the poll interval into an output data rate configuration
> + * that is as low as possible. The ordering of these checks must
> be
> + * maintained due to the cascading cut off values - poll intervals
> are
> + * checked from shortest to longest. At each check, if the next
> lower
> + * ODR cannot support the current poll interval, we stop searching
> */
> + for (i = 0; i < ARRAY_SIZE(odr_table); i++) {
> + config[1] = odr_table[i].mask;
> + if (poll_interval < odr_table[i].cutoff)
> + break;
> + }
> +
> + config[1] |= LIS331DLH_ENABLE_ALL_AXES;
> +
> + /* If device is currently enabled, we need to write new
> + * configuration out to it */
> + if (atomic_read(&acc->enabled)) {
> + config[0] = CTRL_REG1;
> + err = lis331dlh_i2c_write(acc, config, 1);
> + if (err < 0)
> + return err;
> + }
> +
> + acc->resume_state[0] = config[1];
> +
> + return 0;
> +}
> +
> +static int decode(u8 *p, int adj)
> +{
> + s16 v = p[0] | (p[1] << 8);
> + return (int) v >> adj;
> +}
> +
> +static int lis331dlh_get_data(struct lis331dlh_data *acc,
> + int *xyz)
> +{
> + int err = -1;
> + /* Data bytes from hardware xL, xH, yL, yH, zL, zH */
> + u8 acc_data[6];
> + /* x,y,z hardware data */
> + int hw_d[3] = { 0 };
> +
> + acc_data[0] = (AUTO_INCREMENT | AXISDATA_REG);
> + err = lis331dlh_i2c_read(acc, acc_data, 6);
> + if (err < 0)
> + return err;
> +
> + hw_d[0] = decode(acc_data, acc->shift_adj);
> + hw_d[1] = decode(acc_data + 2, acc->shift_adj);
> + hw_d[2] = decode(acc_data + 4, acc->shift_adj);
> +
> + xyz[0] = ((acc->pdata->negate_x) ? (-hw_d[acc->pdata->axis_map_x])
> + : (hw_d[acc->pdata->axis_map_x]));
> + xyz[1] = ((acc->pdata->negate_y) ? (-hw_d[acc->pdata->axis_map_y])
> + : (hw_d[acc->pdata->axis_map_y]));
> + xyz[2] = ((acc->pdata->negate_z) ? (-hw_d[acc->pdata->axis_map_z])
> + : (hw_d[acc->pdata->axis_map_z]));
> +
> + return err;
> +}
> +
> +static void lis331dlh_report_values(struct lis331dlh_data *acc,
> + int *xyz)
> +{
> + struct input_dev *input = acc->input_poll_dev->input;
> + input_report_abs(input, ABS_X, xyz[0]);
> + input_report_abs(input, ABS_Y, xyz[1]);
> + input_report_abs(input, ABS_Z, xyz[2]);
> + input_sync(input);
> +}
> +
> +static int lis331dlh_enable(struct lis331dlh_data *acc)
> +{
> + int err;
> +
> + if (!atomic_cmpxchg(&acc->enabled, 0, 1)) {
> +
> + err = lis331dlh_device_power_on(acc);
> + if (err < 0) {
> + atomic_set(&acc->enabled, 0);
> + return err;
> + }
> + }
> +
> + return 0;
> +}
> +
> +static int lis331dlh_disable(struct lis331dlh_data *acc)
> +{
> + if (atomic_cmpxchg(&acc->enabled, 1, 0))
> + lis331dlh_device_power_off(acc);
> +
> + return 0;
> +}
> +
> +static ssize_t attr_get_polling_rate(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + struct lis331dlh_data *acc = dev_get_drvdata(dev);
> + int val;
> + mutex_lock(&acc->lock);
> + val = acc->pdata->poll_interval;
> + mutex_unlock(&acc->lock);
> + return sprintf(buf, "%d\n", val);
> +}
> +
> +static ssize_t attr_set_polling_rate(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t size)
> +{
> + struct lis331dlh_data *acc = dev_get_drvdata(dev);
> + unsigned long interval_ms;
> +
> + if (strict_strtoul(buf, 10, &interval_ms))
> + return -EINVAL;
> + if (!interval_ms)
> + return -EINVAL;
> + mutex_lock(&acc->lock);
> + acc->pdata->poll_interval = interval_ms;
> + lis331dlh_update_odr(acc, interval_ms);
> + mutex_unlock(&acc->lock);
> + return size;
> +}
> +
> +static ssize_t attr_get_range(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct lis331dlh_data *acc = dev_get_drvdata(dev);
> + char range;
> + char val;
> + mutex_lock(&acc->lock);
> + val = acc->pdata->g_range ;
> + switch (val) {
> + case LIS331DLH_G_2G:
> + range = 2;
> + break;
> + case LIS331DLH_G_4G:
> + range = 4;
> + break;
> + case LIS331DLH_G_8G:
> + range = 8;
> + break;
> + default:
> + range = 2;
> + break;
> + }
> + mutex_unlock(&acc->lock);
> + return sprintf(buf, "%d\n", range);
> +}
> +
> +static ssize_t attr_set_range(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t size)
> +{
> + struct lis331dlh_data *acc = dev_get_drvdata(dev);
> + unsigned long val;
> + if (strict_strtoul(buf, 10, &val))
> + return -EINVAL;
> + mutex_lock(&acc->lock);
> + acc->pdata->g_range = val;
> + lis331dlh_update_g_range(acc, val);
> + mutex_unlock(&acc->lock);
> + return size;
> +}
> +
> +static ssize_t attr_get_enable(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct lis331dlh_data *acc = dev_get_drvdata(dev);
> + int val = atomic_read(&acc->enabled);
> + return sprintf(buf, "%d\n", val);
> +}
> +
> +static ssize_t attr_set_enable(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t size)
> +{
> + struct lis331dlh_data *acc = dev_get_drvdata(dev);
> + unsigned long val;
> +
> + if (strict_strtoul(buf, 10, &val))
> + return -EINVAL;
> +
> + if (val)
> + lis331dlh_enable(acc);
> + else
> + lis331dlh_disable(acc);
> +
> + return size;
> +}
> +
> +static ssize_t attr_reg_set(struct device *dev, struct device_attribute
> *attr,
> + const char *buf, size_t size)
> +{
> + int rc;
> + struct lis331dlh_data *acc = dev_get_drvdata(dev);
> + u8 x[2];
> + unsigned long val;
> +
> + if (strict_strtoul(buf, 16, &val))
> + return -EINVAL;
> + mutex_lock(&acc->lock);
> + x[0] = acc->reg_addr;
> + mutex_unlock(&acc->lock);
> + x[1] = val;
> + rc = lis331dlh_i2c_write(acc, x, 1);
> + return size;
> +}
> +
> +static ssize_t attr_reg_get(struct device *dev, struct device_attribute
> *attr,
> + char *buf)
> +{
> + ssize_t ret;
> + struct lis331dlh_data *acc = dev_get_drvdata(dev);
> + int rc;
> + u8 data;
> +
> + mutex_lock(&acc->lock);
> + data = acc->reg_addr;
> + mutex_unlock(&acc->lock);
> + rc = lis331dlh_i2c_read(acc, &data, 1);
> + ret = sprintf(buf, "0x%02x\n", data);
> + return ret;
> +}
> +
> +static ssize_t attr_addr_set(struct device *dev, struct device_attribute
> *attr,
> + const char *buf, size_t size)
> +{
> + struct lis331dlh_data *acc = dev_get_drvdata(dev);
> + unsigned long val;
> + if (strict_strtoul(buf, 16, &val))
> + return -EINVAL;
> + mutex_lock(&acc->lock);
> + acc->reg_addr = val;
> + mutex_unlock(&acc->lock);
> + return size;
> +}
> +
> +static struct device_attribute attributes[] = {
> + __ATTR(pollrate_ms, 0666, attr_get_polling_rate,
> attr_set_polling_rate),
> + __ATTR(range, 0666, attr_get_range, attr_set_range),
> + __ATTR(enable, 0666, attr_get_enable, attr_set_enable),
> + __ATTR(reg_value, 0600, attr_reg_get, attr_reg_set),
> + __ATTR(reg_addr, 0200, NULL, attr_addr_set),
> +};
> +
> +static int create_sysfs_interfaces(struct device *dev)
> +{
> + int i;
> + for (i = 0; i < ARRAY_SIZE(attributes); i++)
> + if (device_create_file(dev, attributes + i))
> + goto error;
> + return 0;
> +
> +error:
> + for ( ; i >= 0; i--)
> + device_remove_file(dev, attributes + i);
> + dev_err(dev, "%s:Unable to create interface\n", __func__);
> + return -1;
> +}
> +
> +static int remove_sysfs_interfaces(struct device *dev)
> +{
> + int i;
> + for (i = 0; i < ARRAY_SIZE(attributes); i++)
> + device_remove_file(dev, attributes + i);
> + return 0;
> +}
> +
> +
> +static void lis331dlh_input_poll_func(struct input_polled_dev *dev)
> +{
> + struct lis331dlh_data *acc = dev->private;
> +
> + int xyz[3] = { 0 };
> + int err;
> +
> + /* acc = container_of((struct delayed_work *)work,
> + struct lis331dlh_data, input_work); */
> +
> + mutex_lock(&acc->lock);
> + err = lis331dlh_get_data(acc, xyz);
> + if (err < 0)
> + dev_err(&acc->client->dev, "get_acceleration_data failed\n");
> + else
> + lis331dlh_report_values(acc, xyz);
> +
> + mutex_unlock(&acc->lock);
> +}
> +
> +int lis331dlh_input_open(struct input_dev *input)
> +{
> + struct lis331dlh_data *acc = input_get_drvdata(input);
> +
> + return lis331dlh_enable(acc);
> +}
> +
> +void lis331dlh_input_close(struct input_dev *dev)
> +{
> + struct lis331dlh_data *acc = input_get_drvdata(dev);
> +
> + lis331dlh_disable(acc);
> +}
> +
> +static int lis331dlh_validate_pdata(struct lis331dlh_data *acc)
> +{
> + acc->pdata->poll_interval = max(acc->pdata->poll_interval,
> + acc->pdata->min_interval);
> +
> + if (acc->pdata->axis_map_x > 2 ||
> + acc->pdata->axis_map_y > 2 || acc->pdata->axis_map_z > 2) {
> + dev_err(&acc->client->dev,
> + "invalid axis_map value x:%u y:%u z%u\n",
> + acc->pdata->axis_map_x, acc->pdata->axis_map_y,
> + acc->pdata->axis_map_z);
> + return -EINVAL;
> + }
> +
> + /* Only allow 0 and 1 for negation boolean flag */
> + if (acc->pdata->negate_x > 1 || acc->pdata->negate_y > 1 ||
> + acc->pdata->negate_z > 1) {
> + dev_err(&acc->client->dev,
> + "invalid negate value x:%u y:%u z:%u\n",
> + acc->pdata->negate_x, acc->pdata->negate_y,
> + acc->pdata->negate_z);
> + return -EINVAL;
> + }
> +
> + /* Enforce minimum polling interval */
> + if (acc->pdata->poll_interval < acc->pdata->min_interval) {
> + dev_err(&acc->client->dev, "minimum poll interval
> violated\n");
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static int lis331dlh_input_init(struct lis331dlh_data *acc)
> +{
> + int err;
> + struct input_dev *input;
> +
> + acc->input_poll_dev = input_allocate_polled_device();
> + if (!acc->input_poll_dev) {
> + err = -ENOMEM;
> + dev_err(&acc->client->dev, "input device allocate failed\n");
> + goto err0;
> + }
why a polled_device is preferred over input device?
> +
> + /* set input-polldev handlers */
> + acc->input_poll_dev->private = acc;
> + acc->input_poll_dev->poll = lis331dlh_input_poll_func;
> + acc->input_poll_dev->poll_interval = acc->pdata->poll_interval;
> +
> + input = acc->input_poll_dev->input;
> +
> + input->open = lis331dlh_input_open;
> + input->close = lis331dlh_input_close;
> + input->name = LIS331DLH_DEV_NAME;
> + input->id.bustype = BUS_I2C;
> + input->dev.parent = &acc->client->dev;
> +
> + input_set_drvdata(acc->input_poll_dev->input, acc);
> +
> + set_bit(EV_ABS, input->evbit);
> +
> + input_set_abs_params(input, ABS_X, -G_MAX, G_MAX, FUZZ, FLAT);
> + input_set_abs_params(input, ABS_Y, -G_MAX, G_MAX, FUZZ, FLAT);
> + input_set_abs_params(input, ABS_Z, -G_MAX, G_MAX, FUZZ, FLAT);
> +
> + input->name = "accelerometer";
> +
> + err = input_register_polled_device(acc->input_poll_dev);
> + if (err) {
> + dev_err(&acc->client->dev,
> + "unable to register input polled device %s\n",
> + acc->input_poll_dev->input->name);
> + goto err1;
> + }
> +
> + return 0;
> +
> +err1:
> + input_free_polled_device(acc->input_poll_dev);
> +err0:
> + return err;
> +}
> +
> +static void lis331dlh_input_cleanup(struct lis331dlh_data *acc)
> +{
> + input_unregister_polled_device(acc->input_poll_dev);
> + input_free_polled_device(acc->input_poll_dev);
> +}
> +
> +static int lis331dlh_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
Do you need it after init?
> +{
> + struct lis331dlh_data *acc;
> + int err = -1;
> +
> + if (client->dev.platform_data == NULL) {
> + dev_err(&client->dev, "platform data is NULL. exiting.\n");
> + err = -ENODEV;
> + goto err0;
> + }
> +
> + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
> + dev_err(&client->dev, "client not i2c capable\n");
> + err = -ENODEV;
> + goto err0;
> + }
> +
> + acc = kzalloc(sizeof(*acc), GFP_KERNEL);
> + if (acc == NULL) {
> + dev_err(&client->dev,
> + "failed to allocate memory for module data\n");
> + err = -ENOMEM;
> + goto err0;
> + }
> +
> + mutex_init(&acc->lock);
> + mutex_lock(&acc->lock);
> + acc->client = client;
> +
> + acc->pdata = kmalloc(sizeof(*acc->pdata), GFP_KERNEL);
> + if (acc->pdata == NULL)
> + goto err1;
> +
> + memcpy(acc->pdata, client->dev.platform_data, sizeof(*acc->pdata));
> +
> + err = lis331dlh_validate_pdata(acc);
> + if (err < 0) {
> + dev_err(&client->dev, "failed to validate platform data\n");
> + goto err1_1;
> + }
> +
> + i2c_set_clientdata(client, acc);
> +
> + if (acc->pdata->init) {
> + err = acc->pdata->init();
> + if (err < 0)
> + goto err1_1;
> + }
> +
> + memset(acc->resume_state, 0, ARRAY_SIZE(acc->resume_state));
> +
> + acc->resume_state[0] = 0x27;
> + acc->resume_state[1] = 0x00;
> + acc->resume_state[2] = 0x00;
> + acc->resume_state[3] = 0x00;
> + acc->resume_state[4] = 0x00;
> +
> + err = lis331dlh_device_power_on(acc);
> + if (err < 0)
> + goto err2;
What does power on do ? Do you think it make sense for open/close.
Just curious not a comment.
> +
> + atomic_set(&acc->enabled, 1);
> +
> + err = lis331dlh_update_g_range(acc, arioucc->pdata->g_range);
> + if (err < 0) {
> + dev_err(&client->dev, "update_g_range failed\n");
> + goto err2;
> + }
> +
> + err = lis331dlh_update_odr(acc, acc->pdata->poll_interval);
> + if (err < 0) {
> + dev_err(&client->dev, "update_odr failed\n");
> + goto err2;
> + }
> +
> + err = lis331dlh_input_init(acc);
> + if (err < 0)
> + goto err3;
> +
> + err = create_sysfs_interfaces(&client->dev);
> + if (err < 0) {
> + dev_err(&client->dev, "lsm_acc_device register failed\n");
> + goto err4;
> + }
> +
> + lis331dlh_device_power_off(acc);
> +
> + /* As default, do not report information */
> + atomic_set(&acc->enabled, 0);
> +
> + mutex_unlock(&acc->lock);
> +
> + dev_info(&client->dev, "lis331dlh probed\n");
> +
> + return 0;
> +
> +err4:
> + lis331dlh_input_cleanup(acc);
> +err3:
> + lis331dlh_device_power_off(acc);
> +err2:
> + if (acc->pdata->exit)
> + acc->pdata->exit();
> +err1_1:
> + mutex_unlock(&acc->lock);
> + kfree(acc->pdata);
> +err1:
> + kfree(acc);
> +err0:
> + return err;
> +}
> +
> +static int __devexit lis331dlh_remove(struct i2c_client *client)
> +{
> + /* TODO: revisit ordering here once _probe order is finalized */
> + struct lis331dlh_data *acc = i2c_get_clientdata(client);
> + lis331dlh_input_cleanup(acc);
> + lis331dlh_device_power_off(acc);
> + remove_sysfs_interfaces(&client->dev);
> + if (acc->pdata->exit)
> + acc->pdata->exit();
> + kfree(acc->pdata);
> + kfree(acc);
> +
> + return 0;
> +}
> +
> +static int lis331dlh_resume(struct i2c_client *client)
> +{
> + struct lis331dlh_data *acc = i2c_get_clientdata(client);
> +
> + if (acc->on_before_suspend)
> + return lis331dlh_enable(acc);
> + return 0;
> +}
> +
> +static int lis331dlh_suspend(struct i2c_client *client, pm_message_t
> mesg)
> +{
> + struct lis331dlh_data *acc = i2c_get_clientdata(client);
> +
> + acc->on_before_suspend = atomic_read(&acc->enabled);
> + return lis331dlh_disable(acc);
> +}
> +
> +static const struct i2c_device_id lis331dlh_id[] = {
> + {LIS331DLH_DEV_NAME, 0},
> + {},
> +};
> +
> +MODULE_DEVICE_TABLE(i2c, lis331dlh_id);
> +
> +static struct i2c_driver lis331dlh_driver = {
> + .driver = {
> + .name = LIS331DLH_DEV_NAME,
> + .owner = THIS_MODULE,
> + },
> + .probe = lis331dlh_probe,
> + .remove = __devexit_p(lis331dlh_remove),
> + .resume = lis331dlh_resume,
> + .suspend = lis331dlh_suspend,
You may consider Pm.suspend resume
> + .id_table = lis331dlh_id,
> +};
> +
> +static int __init lis331dlh_init(void)
> +{
> + pr_debug("LIS331DLH driver for the accelerometer part\n");
> + return i2c_add_driver(&lis331dlh_driver);
> +}
> +
> +static void __exit lis331dlh_exit(void)
> +{
> + i2c_del_driver(&lis331dlh_driver);
> + return;
> +}
> +
> +module_init(lis331dlh_init);
> +module_exit(lis331dlh_exit);
> +
> +MODULE_DESCRIPTION("lis331dlh accelerometer driver");
> +MODULE_AUTHOR("STMicroelectronics");
> +MODULE_LICENSE("GPL");
> +
> diff --git a/drivers/input/misc/lis331dlh.h
> b/drivers/input/misc/lis331dlh.h
> new file mode 100644
> index 0000000..4ea008a
> --- /dev/null
> +++ b/drivers/input/misc/lis331dlh.h
> @@ -0,0 +1,83 @@
> +/******************** (C) COPYRIGHT 2010 STMicroelectronics
> ********************
> +*
> +* File Name : lis331dlh.h
> +* Authors : MSH - Motion Mems BU - Application Team
> +* : Carmine Iascone (carmine.iascone@st.com)
> +* : Matteo Dameno (matteo.dameno@st.com)
> +* Version : V 1.0.0
> +* Date : 08/11/2010
> +* Description : LIS331DLH sensor API
> +*
> +*************************************************************************
> *******
> +*
> +* This program is free software; you can redistribute it and/or modify
> +* it under the terms of the GNU General Public License version 2 as
> +* published by the Free Software Foundation.
> +*
> +* THE PRESENT SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT
> WARRANTIES
> +* OR CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED, FOR THE SOLE
> +* PURPOSE TO SUPPORT YOUR APPLICATION DEVELOPMENT.
> +* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
> DIRECT,
> +* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
> FROM THE
> +* CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
> +* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
> +*
> +* THIS SOFTWARE IS SPECIFICALLY DESIGNED FOR EXCLUSIVE USE WITH ST PARTS.
> +*
> +*************************************************************************
> ******/
> +
> +#ifndef __LIS331DLH_H__
> +#define __LIS331DLH_H__
> +
> +#include <linux/types.h>
> +
> +/************************************************/
> +/* Accelerometer section defines */
> +/************************************************/
> +
> +/* Accelerometer Sensor Full Scale */
> +#define LIS331DLH_G_2G 0x00
> +#define LIS331DLH_G_4G 0x10
> +#define LIS331DLH_G_8G 0x30
> +
> +/* Accelerometer Sensor Operating Mode */
> +#define LIS331DLH_PM_OFF 0x00
> +#define LIS331DLH_PM_NORMAL 0x20
> +#define LIS331DLH_ENABLE_ALL_AXES 0x07
> +
> +/* Accelerometer output data rate */
> +#define LIS331DLH_ODRHALF 0x40 /* 0.5Hz output data rate */
> +#define LIS331DLH_ODR1 0x60 /* 1Hz output data rate */
> +#define LIS331DLH_ODR2 0x80 /* 2Hz output data rate */
> +#define LIS331DLH_ODR5 0xA0 /* 5Hz output data rate */
> +#define LIS331DLH_ODR10 0xC0 /* 10Hz output data rate
> */
> +#define LIS331DLH_ODR50 0x00 /* 50Hz output data rate
> */
> +#define LIS331DLH_ODR100 0x08 /* 100Hz output data rate */
> +#define LIS331DLH_ODR400 0x10 /* 400Hz output data rate */
> +#define LIS331DLH_ODR1000 0x18 /* 1000Hz output data rate */
> +
> +#ifdef __KERNEL__
> +struct lis331dlh_platform_data {
> +
> + int poll_interval;
> + int min_interval;
> +
> + u8 g_range;
> +
> + u8 axis_map_x;
> + u8 axis_map_y;
> + u8 axis_map_z;
> +
> + u8 negate_x;
> + u8 negate_y;
> + u8 negate_z;
> +
> + int (*init)(void);
> + void (*exit)(void);
> + int (*power_on)(void);
> + int (*power_off)(void);
> +
> +};
> +#endif /* __KERNEL__ */
> +
> +#endif /* __LIS331DLH_H__ */
> --
> 1.5.4.3
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-input" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 4+ messages in thread
* RE: [PATCH] input: misc: add lis331dlh driver
2010-11-11 13:03 ` Datta, Shubhrajyoti
@ 2010-11-18 15:51 ` Carmine IASCONE
2010-11-18 19:08 ` Jonathan Cameron
1 sibling, 0 replies; 4+ messages in thread
From: Carmine IASCONE @ 2010-11-18 15:51 UTC (permalink / raw)
To: Datta, Shubhrajyoti, dmitry.torokhov@gmail.com
Cc: Matteo DAMENO, linux-input@vger.kernel.org,
linux-kernel@vger.kernel.org
> -----Original Message-----
> From: Datta, Shubhrajyoti [mailto:shubhrajyoti@ti.com]
> Sent: Thursday, November 11, 2010 2:03 PM
> To: mems applications; dmitry.torokhov@gmail.com
> Cc: Carmine IASCONE; Matteo DAMENO; linux-input@vger.kernel.org; linux-
> kernel@vger.kernel.org
> Subject: RE: [PATCH] input: misc: add lis331dlh driver
>
>
>
> > -----Original Message-----
> > From: linux-input-owner@vger.kernel.org [mailto:linux-input-
> > owner@vger.kernel.org] On Behalf Of mems applications
> > Sent: Thursday, November 11, 2010 5:28 PM
> > To: dmitry.torokhov@gmail.com
> > Cc: carmine.iascone@st.com; matteo.dameno@st.com; linux-
> > input@vger.kernel.org; linux-kernel@vger.kernel.org
> > Subject: [PATCH] input: misc: add lis331dlh driver
> >
> > Add STMicroelectronics LIS331DLH digital accelerometer device driver
> >
> > Signed-off-by: Carmine Iascone <carmine.iascone@st.com>
> > ---
> > drivers/input/misc/Kconfig | 7 +
> > drivers/input/misc/Makefile | 2 +-
> > drivers/input/misc/lis331dlh.c | 836
> > ++++++++++++++++++++++++++++++++++++++++
> > drivers/input/misc/lis331dlh.h | 83 ++++
> > 4 files changed, 927 insertions(+), 1 deletions(-)
> > create mode 100644 drivers/input/misc/lis331dlh.c
> > create mode 100644 drivers/input/misc/lis331dlh.h
> >
> > diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
> > index b99b8cb..eb58bd3 100644
> > --- a/drivers/input/misc/Kconfig
> > +++ b/drivers/input/misc/Kconfig
> > @@ -448,4 +448,11 @@ config INPUT_ADXL34X_SPI
> > To compile this driver as a module, choose M here: the
> > module will be called adxl34x-spi.
> >
> > +config INPUT_LIS331DLH
> > + tristate "STMicroelectronics LIS331DLH Accelerometer"
> > + depends on I2C
> > + ---help---
> > + If you say yes here you get support for the STMicroelectronics
> > + LIS331DLH accelerometer sensor
> > +
> > endif
> > diff --git a/drivers/input/misc/Makefile
> b/drivers/input/misc/Makefile
> > index 1fe1f6c..819e1a3 100644
> > --- a/drivers/input/misc/Makefile
> > +++ b/drivers/input/misc/Makefile
> > @@ -23,6 +23,7 @@ obj-$(CONFIG_INPUT_DM355EVM) +=
> dm355evm_keys.o
> > obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o
> > obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o
> > obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o
> > +obj-$(CONFIG_INPUT_LIS331DLH) += lis331dlh.o
> > obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o
> > obj-$(CONFIG_INPUT_MAX8925_ONKEY) += max8925_onkey.o
> > obj-$(CONFIG_INPUT_PCAP) += pcap_keys.o
> > @@ -42,4 +43,3 @@ obj-$(CONFIG_INPUT_WINBOND_CIR) +=
> winbond-
> > cir.o
> > obj-$(CONFIG_INPUT_WISTRON_BTNS) += wistron_btns.o
> > obj-$(CONFIG_INPUT_WM831X_ON) += wm831x-on.o
> > obj-$(CONFIG_INPUT_YEALINK) += yealink.o
> > -
> > diff --git a/drivers/input/misc/lis331dlh.c
> > b/drivers/input/misc/lis331dlh.c
> > new file mode 100644
> > index 0000000..2b72c12
> > --- /dev/null
> > +++ b/drivers/input/misc/lis331dlh.c
> > @@ -0,0 +1,836 @@
> > +/******************** (C) COPYRIGHT 2010 STMicroelectronics
> > ********************
> > +*
> > +* File Name : lis331dlh.c
> > +* Authors : MSH - Motion Mems BU - Application Team
> > +* : Carmine Iascone (carmine.iascone@st.com)
> > +* : Matteo Dameno (matteo.dameno@st.com)
> > +* Version : V 1.0.0
> > +* Date : 08/11/2010
> > +* Description : LIS331DLH sensor API
> > +*
> >
> +**********************************************************************
> ***
> > *******
> > +*
> > +* This program is free software; you can redistribute it and/or
> modify
> > +* it under the terms of the GNU General Public License version 2 as
> > +* published by the Free Software Foundation.
> > +*
> > +* THE PRESENT SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT
> > WARRANTIES
> > +* OR CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED, FOR THE SOLE
> > +* PURPOSE TO SUPPORT YOUR APPLICATION DEVELOPMENT.
> > +* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
> > DIRECT,
> > +* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS
> ARISING
> > FROM THE
> > +* CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
> CODING
> > +* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
> > +*
> > +* THIS SOFTWARE IS SPECIFICALLY DESIGNED FOR EXCLUSIVE USE WITH ST
> PARTS.
> > +*
> >
> +**********************************************************************
> ***
> > *****/
> > +#include "lis331dlh.h"
> > +
> > +#include <linux/i2c.h>
> > +#include <linux/mutex.h>
> > +#include <linux/input-polldev.h>
> > +#include <linux/slab.h>
> > +
> > +
> > +#define LIS331DLH_DEV_NAME "lis331dlh"
> > +
> > +/** Maximum polled-device-reported g value */
> > +#define G_MAX 8000
> > +
> > +#define SHIFT_ADJ_2G 4
> > +#define SHIFT_ADJ_4G 3
> > +#define SHIFT_ADJ_8G 2
> > +
> > +#define AXISDATA_REG 0x28
> > +
> > +/* ctrl 1: pm2 pm1 pm0 dr1 dr0 zenable yenable zenable */
> > +#define CTRL_REG1 0x20 /* power control reg */
> > +#define CTRL_REG2 0x21 /* power control reg */
> > +#define CTRL_REG3 0x22 /* power control reg */
> > +#define CTRL_REG4 0x23 /* interrupt control reg */
> > +
> > +#define FUZZ 0
> > +#define FLAT 0
> > +#define I2C_RETRY_DELAY 5
> > +#define I2C_RETRIES 5
> > +#define AUTO_INCREMENT 0x80
> > +
> > +static struct {
> > + unsigned int cutoff;
> > + unsigned int mask;
> > +} odr_table[] = {
> > + {
> > + 3, LIS331DLH_PM_NORMAL | LIS331DLH_ODR1000}, {
> > + 10, LIS331DLH_PM_NORMAL | LIS331DLH_ODR400}, {
> > + 20, LIS331DLH_PM_NORMAL | LIS331DLH_ODR100}, {
> > + 100, LIS331DLH_PM_NORMAL | LIS331DLH_ODR50}, {
> > + 200, LIS331DLH_ODR1000 | LIS331DLH_ODR10}, {
> > + 500, LIS331DLH_ODR1000 | LIS331DLH_ODR5}, {
> > + 1000, LIS331DLH_ODR1000 | LIS331DLH_ODR2}, {
> > + 2000, LIS331DLH_ODR1000 | LIS331DLH_ODR1}, {
> > + 0, LIS331DLH_ODR1000 | LIS331DLH_ODRHALF},};
> > +
> > +struct lis331dlh_data {
> > + struct i2c_client *client;
> > + struct lis331dlh_platform_data *pdata;
> > +
> > + struct mutex lock;
> > +
> > + struct input_polled_dev *input_poll_dev;
> > +
> > + int hw_initialized;
> > + atomic_t enabled;
> > + int on_before_suspend;
> > +
> > + u8 reg_addr;
> > +
> > + u8 shift_adj;
> > + u8 resume_state[5];
> > +};
> > +
> > +/*
> > + * Because misc devices can not carry a pointer from driver register
> to
> > + * open, we keep this global. This limits the driver to a single
> > instance.
> > + */
> > +struct lis331dlh_data *lis331dlh_misc_data;
> > +
> > +static int lis331dlh_i2c_read(struct lis331dlh_data *acc,
> > + u8 *buf, int len)
> > +{
> > + int err;
> > +
> > + struct i2c_msg msgs[] = {
> > + {
> > + .addr = acc->client->addr,
> > + .flags = acc->client->flags & I2C_M_TEN,
> > + .len = 1,
> > + .buf = buf,
> > + },
> > + {
> > + .addr = acc->client->addr,
> > + .flags = (acc->client->flags & I2C_M_TEN) | I2C_M_RD,
> > + .len = len,
> > + .buf = buf,
> > + },
> > + };
> > +
> > + err = i2c_transfer(acc->client->adapter, msgs, 2);
> > +
> > + if (err != 2) {
> > + dev_err(&acc->client->dev, "read transfer error\n");
> > + err = -EIO;
> > + } else {
> > + err = 0;
> > + }
> > +
> > + return err;
> > +}
> > +
> > +static int lis331dlh_i2c_write(struct lis331dlh_data *acc,
> > + u8 *buf, int len)
> > +{
> > + int err;
> > +
> > + struct i2c_msg msgs[] = {
> > + {
> > + .addr = acc->client->addr,
> > + .flags = acc->client->flags & I2C_M_TEN,
> > + .len = len + 1,
> > + .buf = buf,
> > + },
> > + };
> > +
> > + err = i2c_transfer(acc->client->adapter, msgs, 1);
> > +
> > + if (err != 1) {
> > + dev_err(&acc->client->dev, "write transfer error\n");
> > + err = -EIO;
> > + } else {
> > + err = 0;
> > + }
> > +
> > + return err;
> > +}
> > +
> > +static int lis331dlh_hw_init(struct lis331dlh_data *acc)
> > +{
> > + int err = -1;
> > + u8 buf[6];
> > +
> > + buf[0] = (AUTO_INCREMENT | CTRL_REG1);
> > + buf[1] = acc->resume_state[0];
> > + buf[2] = acc->resume_state[1];
> > + buf[3] = acc->resume_state[2];
> > + buf[4] = acc->resume_state[3];
> > + buf[5] = acc->resume_state[4];
> > + err = lis331dlh_i2c_write(acc, buf, 5);
> > + if (err < 0)
> > + return err;
> > +
> > + acc->hw_initialized = 1;
> > +
> > + return 0;
> > +}
> > +
> > +static void lis331dlh_device_power_off(struct lis331dlh_data *acc)
> > +{
> > + int err;
> > + u8 buf[2] = { CTRL_REG1,
> > + LIS331DLH_PM_OFF | LIS331DLH_ENABLE_ALL_AXES };
> > +
> > + err = lis331dlh_i2c_write(acc, buf, 1);
> > + if (err < 0)
> > + dev_err(&acc->client->dev, "soft power off failed\n");
> > +
> > + if (acc->pdata->power_off)
> > + acc->pdata->power_off();
> > +
> > + acc->hw_initialized = 0;
> > +
> > +}
> > +
> > +static int lis331dlh_device_power_on(struct lis331dlh_data *acc)
> > +{
> > + int err;
> > +
> > + if (acc->pdata->power_on) {
> > + err = acc->pdata->power_on();
> > + if (err < 0)
> > + return err;
> > + }
> > +
> > + if (!acc->hw_initialized) {
> > + err = lis331dlh_hw_init(acc);
> > + if (err < 0) {
> > + lis331dlh_device_power_off(acc);
> > + return err;
> > + }
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +int lis331dlh_update_g_range(struct lis331dlh_data *acc, u8
> new_g_range)
> > +{
> > + int err;
> > + u8 shift;
> > + u8 buf[2];
> > + switch (new_g_range) {
> > + case LIS331DLH_G_2G:
> > + shift = SHIFT_ADJ_2G;
> > + break;
> > + case LIS331DLH_G_4G:
> > + shift = SHIFT_ADJ_4G;
> > + break;
> > + case LIS331DLH_G_8G:
> > + shift = SHIFT_ADJ_8G;
> > + break;
> > + default:
> > + return -EINVAL;
> > + }
> > +
> > + if (atomic_read(&acc->enabled)) {
> > + /* Set configuration register 4, which contains g range
> > setting
> > + * NOTE: this is a straight overwrite because this
> driver
> > does
> > + * not use any of the other configuration bits in this
> > + * register. Should this become untrue, we will have
> to read
> > + * out the value and only change the relevant bits --
> XX----
> > + * (marked by X) */
> > + buf[0] = CTRL_REG4;
> > + buf[1] = new_g_range;
> > + err = lis331dlh_i2c_write(acc, buf, 1);
> > + if (err < 0)
> > + return err;
> > + }
> > +
> > + acc->resume_state[3] = new_g_range;
> > + acc->shift_adj = shift;
> > +
> > + return 0;
> > +}
> > +
> > +int lis331dlh_update_odr(struct lis331dlh_data *acc, int
> poll_interval)
> > +{
> > + int err = -1;
> > + int i;
> > + u8 config[2];
> > +
> > + /* Convert the poll interval into an output data rate
> configuration
> > + * that is as low as possible. The ordering of these checks
> must
> > be
> > + * maintained due to the cascading cut off values - poll
> intervals
> > are
> > + * checked from shortest to longest. At each check, if the
> next
> > lower
> > + * ODR cannot support the current poll interval, we stop
> searching
> > */
> > + for (i = 0; i < ARRAY_SIZE(odr_table); i++) {
> > + config[1] = odr_table[i].mask;
> > + if (poll_interval < odr_table[i].cutoff)
> > + break;
> > + }
> > +
> > + config[1] |= LIS331DLH_ENABLE_ALL_AXES;
> > +
> > + /* If device is currently enabled, we need to write new
> > + * configuration out to it */
> > + if (atomic_read(&acc->enabled)) {
> > + config[0] = CTRL_REG1;
> > + err = lis331dlh_i2c_write(acc, config, 1);
> > + if (err < 0)
> > + return err;
> > + }
> > +
> > + acc->resume_state[0] = config[1];
> > +
> > + return 0;
> > +}
> > +
> > +static int decode(u8 *p, int adj)
> > +{
> > + s16 v = p[0] | (p[1] << 8);
> > + return (int) v >> adj;
> > +}
> > +
> > +static int lis331dlh_get_data(struct lis331dlh_data *acc,
> > + int *xyz)
> > +{
> > + int err = -1;
> > + /* Data bytes from hardware xL, xH, yL, yH, zL, zH */
> > + u8 acc_data[6];
> > + /* x,y,z hardware data */
> > + int hw_d[3] = { 0 };
> > +
> > + acc_data[0] = (AUTO_INCREMENT | AXISDATA_REG);
> > + err = lis331dlh_i2c_read(acc, acc_data, 6);
> > + if (err < 0)
> > + return err;
> > +
> > + hw_d[0] = decode(acc_data, acc->shift_adj);
> > + hw_d[1] = decode(acc_data + 2, acc->shift_adj);
> > + hw_d[2] = decode(acc_data + 4, acc->shift_adj);
> > +
> > + xyz[0] = ((acc->pdata->negate_x) ? (-hw_d[acc->pdata-
> >axis_map_x])
> > + : (hw_d[acc->pdata->axis_map_x]));
> > + xyz[1] = ((acc->pdata->negate_y) ? (-hw_d[acc->pdata-
> >axis_map_y])
> > + : (hw_d[acc->pdata->axis_map_y]));
> > + xyz[2] = ((acc->pdata->negate_z) ? (-hw_d[acc->pdata-
> >axis_map_z])
> > + : (hw_d[acc->pdata->axis_map_z]));
> > +
> > + return err;
> > +}
> > +
> > +static void lis331dlh_report_values(struct lis331dlh_data *acc,
> > + int *xyz)
> > +{
> > + struct input_dev *input = acc->input_poll_dev->input;
> > + input_report_abs(input, ABS_X, xyz[0]);
> > + input_report_abs(input, ABS_Y, xyz[1]);
> > + input_report_abs(input, ABS_Z, xyz[2]);
> > + input_sync(input);
> > +}
> > +
> > +static int lis331dlh_enable(struct lis331dlh_data *acc)
> > +{
> > + int err;
> > +
> > + if (!atomic_cmpxchg(&acc->enabled, 0, 1)) {
> > +
> > + err = lis331dlh_device_power_on(acc);
> > + if (err < 0) {
> > + atomic_set(&acc->enabled, 0);
> > + return err;
> > + }
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int lis331dlh_disable(struct lis331dlh_data *acc)
> > +{
> > + if (atomic_cmpxchg(&acc->enabled, 1, 0))
> > + lis331dlh_device_power_off(acc);
> > +
> > + return 0;
> > +}
> > +
> > +static ssize_t attr_get_polling_rate(struct device *dev,
> > + struct device_attribute *attr,
> > + char *buf)
> > +{
> > + struct lis331dlh_data *acc = dev_get_drvdata(dev);
> > + int val;
> > + mutex_lock(&acc->lock);
> > + val = acc->pdata->poll_interval;
> > + mutex_unlock(&acc->lock);
> > + return sprintf(buf, "%d\n", val);
> > +}
> > +
> > +static ssize_t attr_set_polling_rate(struct device *dev,
> > + struct device_attribute *attr,
> > + const char *buf, size_t size)
> > +{
> > + struct lis331dlh_data *acc = dev_get_drvdata(dev);
> > + unsigned long interval_ms;
> > +
> > + if (strict_strtoul(buf, 10, &interval_ms))
> > + return -EINVAL;
> > + if (!interval_ms)
> > + return -EINVAL;
> > + mutex_lock(&acc->lock);
> > + acc->pdata->poll_interval = interval_ms;
> > + lis331dlh_update_odr(acc, interval_ms);
> > + mutex_unlock(&acc->lock);
> > + return size;
> > +}
> > +
> > +static ssize_t attr_get_range(struct device *dev,
> > + struct device_attribute *attr, char
> *buf)
> > +{
> > + struct lis331dlh_data *acc = dev_get_drvdata(dev);
> > + char range;
> > + char val;
> > + mutex_lock(&acc->lock);
> > + val = acc->pdata->g_range ;
> > + switch (val) {
> > + case LIS331DLH_G_2G:
> > + range = 2;
> > + break;
> > + case LIS331DLH_G_4G:
> > + range = 4;
> > + break;
> > + case LIS331DLH_G_8G:
> > + range = 8;
> > + break;
> > + default:
> > + range = 2;
> > + break;
> > + }
> > + mutex_unlock(&acc->lock);
> > + return sprintf(buf, "%d\n", range);
> > +}
> > +
> > +static ssize_t attr_set_range(struct device *dev,
> > + struct device_attribute *attr,
> > + const char *buf, size_t size)
> > +{
> > + struct lis331dlh_data *acc = dev_get_drvdata(dev);
> > + unsigned long val;
> > + if (strict_strtoul(buf, 10, &val))
> > + return -EINVAL;
> > + mutex_lock(&acc->lock);
> > + acc->pdata->g_range = val;
> > + lis331dlh_update_g_range(acc, val);
> > + mutex_unlock(&acc->lock);
> > + return size;
> > +}
> > +
> > +static ssize_t attr_get_enable(struct device *dev,
> > + struct device_attribute *attr, char
> *buf)
> > +{
> > + struct lis331dlh_data *acc = dev_get_drvdata(dev);
> > + int val = atomic_read(&acc->enabled);
> > + return sprintf(buf, "%d\n", val);
> > +}
> > +
> > +static ssize_t attr_set_enable(struct device *dev,
> > + struct device_attribute *attr,
> > + const char *buf, size_t size)
> > +{
> > + struct lis331dlh_data *acc = dev_get_drvdata(dev);
> > + unsigned long val;
> > +
> > + if (strict_strtoul(buf, 10, &val))
> > + return -EINVAL;
> > +
> > + if (val)
> > + lis331dlh_enable(acc);
> > + else
> > + lis331dlh_disable(acc);
> > +
> > + return size;
> > +}
> > +
> > +static ssize_t attr_reg_set(struct device *dev, struct
> device_attribute
> > *attr,
> > + const char *buf, size_t size)
> > +{
> > + int rc;
> > + struct lis331dlh_data *acc = dev_get_drvdata(dev);
> > + u8 x[2];
> > + unsigned long val;
> > +
> > + if (strict_strtoul(buf, 16, &val))
> > + return -EINVAL;
> > + mutex_lock(&acc->lock);
> > + x[0] = acc->reg_addr;
> > + mutex_unlock(&acc->lock);
> > + x[1] = val;
> > + rc = lis331dlh_i2c_write(acc, x, 1);
> > + return size;
> > +}
> > +
> > +static ssize_t attr_reg_get(struct device *dev, struct
> device_attribute
> > *attr,
> > + char *buf)
> > +{
> > + ssize_t ret;
> > + struct lis331dlh_data *acc = dev_get_drvdata(dev);
> > + int rc;
> > + u8 data;
> > +
> > + mutex_lock(&acc->lock);
> > + data = acc->reg_addr;
> > + mutex_unlock(&acc->lock);
> > + rc = lis331dlh_i2c_read(acc, &data, 1);
> > + ret = sprintf(buf, "0x%02x\n", data);
> > + return ret;
> > +}
> > +
> > +static ssize_t attr_addr_set(struct device *dev, struct
> device_attribute
> > *attr,
> > + const char *buf, size_t size)
> > +{
> > + struct lis331dlh_data *acc = dev_get_drvdata(dev);
> > + unsigned long val;
> > + if (strict_strtoul(buf, 16, &val))
> > + return -EINVAL;
> > + mutex_lock(&acc->lock);
> > + acc->reg_addr = val;
> > + mutex_unlock(&acc->lock);
> > + return size;
> > +}
> > +
> > +static struct device_attribute attributes[] = {
> > + __ATTR(pollrate_ms, 0666, attr_get_polling_rate,
> > attr_set_polling_rate),
> > + __ATTR(range, 0666, attr_get_range, attr_set_range),
> > + __ATTR(enable, 0666, attr_get_enable, attr_set_enable),
> > + __ATTR(reg_value, 0600, attr_reg_get, attr_reg_set),
> > + __ATTR(reg_addr, 0200, NULL, attr_addr_set),
> > +};
> > +
> > +static int create_sysfs_interfaces(struct device *dev)
> > +{
> > + int i;
> > + for (i = 0; i < ARRAY_SIZE(attributes); i++)
> > + if (device_create_file(dev, attributes + i))
> > + goto error;
> > + return 0;
> > +
> > +error:
> > + for ( ; i >= 0; i--)
> > + device_remove_file(dev, attributes + i);
> > + dev_err(dev, "%s:Unable to create interface\n", __func__);
> > + return -1;
> > +}
> > +
> > +static int remove_sysfs_interfaces(struct device *dev)
> > +{
> > + int i;
> > + for (i = 0; i < ARRAY_SIZE(attributes); i++)
> > + device_remove_file(dev, attributes + i);
> > + return 0;
> > +}
> > +
> > +
> > +static void lis331dlh_input_poll_func(struct input_polled_dev *dev)
> > +{
> > + struct lis331dlh_data *acc = dev->private;
> > +
> > + int xyz[3] = { 0 };
> > + int err;
> > +
> > + /* acc = container_of((struct delayed_work *)work,
> > + struct lis331dlh_data, input_work); */
> > +
> > + mutex_lock(&acc->lock);
> > + err = lis331dlh_get_data(acc, xyz);
> > + if (err < 0)
> > + dev_err(&acc->client->dev, "get_acceleration_data
> failed\n");
> > + else
> > + lis331dlh_report_values(acc, xyz);
> > +
> > + mutex_unlock(&acc->lock);
> > +}
> > +
> > +int lis331dlh_input_open(struct input_dev *input)
> > +{
> > + struct lis331dlh_data *acc = input_get_drvdata(input);
> > +
> > + return lis331dlh_enable(acc);
> > +}
> > +
> > +void lis331dlh_input_close(struct input_dev *dev)
> > +{
> > + struct lis331dlh_data *acc = input_get_drvdata(dev);
> > +
> > + lis331dlh_disable(acc);
> > +}
> > +
> > +static int lis331dlh_validate_pdata(struct lis331dlh_data *acc)
> > +{
> > + acc->pdata->poll_interval = max(acc->pdata->poll_interval,
> > + acc->pdata->min_interval);
> > +
> > + if (acc->pdata->axis_map_x > 2 ||
> > + acc->pdata->axis_map_y > 2 || acc->pdata->axis_map_z > 2) {
> > + dev_err(&acc->client->dev,
> > + "invalid axis_map value x:%u y:%u z%u\n",
> > + acc->pdata->axis_map_x, acc->pdata->axis_map_y,
> > + acc->pdata->axis_map_z);
> > + return -EINVAL;
> > + }
> > +
> > + /* Only allow 0 and 1 for negation boolean flag */
> > + if (acc->pdata->negate_x > 1 || acc->pdata->negate_y > 1 ||
> > + acc->pdata->negate_z > 1) {
> > + dev_err(&acc->client->dev,
> > + "invalid negate value x:%u y:%u z:%u\n",
> > + acc->pdata->negate_x, acc->pdata->negate_y,
> > + acc->pdata->negate_z);
> > + return -EINVAL;
> > + }
> > +
> > + /* Enforce minimum polling interval */
> > + if (acc->pdata->poll_interval < acc->pdata->min_interval) {
> > + dev_err(&acc->client->dev, "minimum poll interval
> > violated\n");
> > + return -EINVAL;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int lis331dlh_input_init(struct lis331dlh_data *acc)
> > +{
> > + int err;
> > + struct input_dev *input;
> > +
> > + acc->input_poll_dev = input_allocate_polled_device();
> > + if (!acc->input_poll_dev) {
> > + err = -ENOMEM;
> > + dev_err(&acc->client->dev, "input device allocate
> failed\n");
> > + goto err0;
> > + }
>
> why a polled_device is preferred over input device?
>
We decided to use the polled-device because at the moment the driver works in
polling mode and we don't manage any interrupts. Anyway we are going to introduce
the interrupts management in a short time.
> > +
> > + /* set input-polldev handlers */
> > + acc->input_poll_dev->private = acc;
> > + acc->input_poll_dev->poll = lis331dlh_input_poll_func;
> > + acc->input_poll_dev->poll_interval = acc->pdata->poll_interval;
> > +
> > + input = acc->input_poll_dev->input;
> > +
> > + input->open = lis331dlh_input_open;
> > + input->close = lis331dlh_input_close;
> > + input->name = LIS331DLH_DEV_NAME;
> > + input->id.bustype = BUS_I2C;
> > + input->dev.parent = &acc->client->dev;
> > +
> > + input_set_drvdata(acc->input_poll_dev->input, acc);
> > +
> > + set_bit(EV_ABS, input->evbit);
> > +
> > + input_set_abs_params(input, ABS_X, -G_MAX, G_MAX, FUZZ, FLAT);
> > + input_set_abs_params(input, ABS_Y, -G_MAX, G_MAX, FUZZ, FLAT);
> > + input_set_abs_params(input, ABS_Z, -G_MAX, G_MAX, FUZZ, FLAT);
> > +
> > + input->name = "accelerometer";
> > +
> > + err = input_register_polled_device(acc->input_poll_dev);
> > + if (err) {
> > + dev_err(&acc->client->dev,
> > + "unable to register input polled device %s\n",
> > + acc->input_poll_dev->input->name);
> > + goto err1;
> > + }
> > +
> > + return 0;
> > +
> > +err1:
> > + input_free_polled_device(acc->input_poll_dev);
> > +err0:
> > + return err;
> > +}
> > +
> > +static void lis331dlh_input_cleanup(struct lis331dlh_data *acc)
> > +{
> > + input_unregister_polled_device(acc->input_poll_dev);
> > + input_free_polled_device(acc->input_poll_dev);
> > +}
> > +
> > +static int lis331dlh_probe(struct i2c_client *client,
> > + const struct i2c_device_id *id)
> Do you need it after init?
>
What do you exactly mean? It is called automatically during the
driver registration.
> > +{
> > + struct lis331dlh_data *acc;
> > + int err = -1;
> > +
> > + if (client->dev.platform_data == NULL) {
> > + dev_err(&client->dev, "platform data is NULL.
> exiting.\n");
> > + err = -ENODEV;
> > + goto err0;
> > + }
> > +
> > + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
> > + dev_err(&client->dev, "client not i2c capable\n");
> > + err = -ENODEV;
> > + goto err0;
> > + }
> > +
> > + acc = kzalloc(sizeof(*acc), GFP_KERNEL);
> > + if (acc == NULL) {
> > + dev_err(&client->dev,
> > + "failed to allocate memory for module data\n");
> > + err = -ENOMEM;
> > + goto err0;
> > + }
> > +
> > + mutex_init(&acc->lock);
> > + mutex_lock(&acc->lock);
> > + acc->client = client;
> > +
> > + acc->pdata = kmalloc(sizeof(*acc->pdata), GFP_KERNEL);
> > + if (acc->pdata == NULL)
> > + goto err1;
> > +
> > + memcpy(acc->pdata, client->dev.platform_data, sizeof(*acc-
> >pdata));
> > +
> > + err = lis331dlh_validate_pdata(acc);
> > + if (err < 0) {
> > + dev_err(&client->dev, "failed to validate platform
> data\n");
> > + goto err1_1;
> > + }
> > +
> > + i2c_set_clientdata(client, acc);
> > +
> > + if (acc->pdata->init) {
> > + err = acc->pdata->init();
> > + if (err < 0)
> > + goto err1_1;
> > + }
> > +
> > + memset(acc->resume_state, 0, ARRAY_SIZE(acc->resume_state));
> > +
> > + acc->resume_state[0] = 0x27;
> > + acc->resume_state[1] = 0x00;
> > + acc->resume_state[2] = 0x00;
> > + acc->resume_state[3] = 0x00;
> > + acc->resume_state[4] = 0x00;
> > +
> > + err = lis331dlh_device_power_on(acc);
> > + if (err < 0)
> > + goto err2;
> What does power on do ? Do you think it make sense for open/close.
> Just curious not a comment.
>
Power on function manages the initialization of the device both during
the probe, and every time you exit from the suspend/power down mode.
> > +
> > + atomic_set(&acc->enabled, 1);
> > +
> > + err = lis331dlh_update_g_range(acc, arioucc->pdata->g_range);
> > + if (err < 0) {
> > + dev_err(&client->dev, "update_g_range failed\n");
> > + goto err2;
> > + }
> > +
> > + err = lis331dlh_update_odr(acc, acc->pdata->poll_interval);
> > + if (err < 0) {
> > + dev_err(&client->dev, "update_odr failed\n");
> > + goto err2;
> > + }
> > +
> > + err = lis331dlh_input_init(acc);
> > + if (err < 0)
> > + goto err3;
> > +
> > + err = create_sysfs_interfaces(&client->dev);
> > + if (err < 0) {
> > + dev_err(&client->dev, "lsm_acc_device register
> failed\n");
> > + goto err4;
> > + }
> > +
> > + lis331dlh_device_power_off(acc);
> > +
> > + /* As default, do not report information */
> > + atomic_set(&acc->enabled, 0);
> > +
> > + mutex_unlock(&acc->lock);
> > +
> > + dev_info(&client->dev, "lis331dlh probed\n");
> > +
> > + return 0;
> > +
> > +err4:
> > + lis331dlh_input_cleanup(acc);
> > +err3:
> > + lis331dlh_device_power_off(acc);
> > +err2:
> > + if (acc->pdata->exit)
> > + acc->pdata->exit();
> > +err1_1:
> > + mutex_unlock(&acc->lock);
> > + kfree(acc->pdata);
> > +err1:
> > + kfree(acc);
> > +err0:
> > + return err;
> > +}
> > +
> > +static int __devexit lis331dlh_remove(struct i2c_client *client)
> > +{
> > + /* TODO: revisit ordering here once _probe order is finalized
> */
> > + struct lis331dlh_data *acc = i2c_get_clientdata(client);
> > + lis331dlh_input_cleanup(acc);
> > + lis331dlh_device_power_off(acc);
> > + remove_sysfs_interfaces(&client->dev);
> > + if (acc->pdata->exit)
> > + acc->pdata->exit();
> > + kfree(acc->pdata);
> > + kfree(acc);
> > +
> > + return 0;
> > +}
> > +
> > +static int lis331dlh_resume(struct i2c_client *client)
> > +{
> > + struct lis331dlh_data *acc = i2c_get_clientdata(client);
> > +
> > + if (acc->on_before_suspend)
> > + return lis331dlh_enable(acc);
> > + return 0;
> > +}
> > +
> > +static int lis331dlh_suspend(struct i2c_client *client, pm_message_t
> > mesg)
> > +{
> > + struct lis331dlh_data *acc = i2c_get_clientdata(client);
> > +
> > + acc->on_before_suspend = atomic_read(&acc->enabled);
> > + return lis331dlh_disable(acc);
> > +}
> > +
> > +static const struct i2c_device_id lis331dlh_id[] = {
> > + {LIS331DLH_DEV_NAME, 0},
> > + {},
> > +};
> > +
> > +MODULE_DEVICE_TABLE(i2c, lis331dlh_id);
> > +
> > +static struct i2c_driver lis331dlh_driver = {
> > + .driver = {
> > + .name = LIS331DLH_DEV_NAME,
> > + .owner = THIS_MODULE,
> > + },
> > + .probe = lis331dlh_probe,
> > + .remove = __devexit_p(lis331dlh_remove),
> > + .resume = lis331dlh_resume,
> > + .suspend = lis331dlh_suspend,
>
> You may consider Pm.suspend resume
Yes, thanks, we will do it.
> > + .id_table = lis331dlh_id,
> > +};
> > +
> > +static int __init lis331dlh_init(void)
> > +{
> > + pr_debug("LIS331DLH driver for the accelerometer part\n");
> > + return i2c_add_driver(&lis331dlh_driver);
> > +}
> > +
> > +static void __exit lis331dlh_exit(void)
> > +{
> > + i2c_del_driver(&lis331dlh_driver);
> > + return;
> > +}
> > +
> > +module_init(lis331dlh_init);
> > +module_exit(lis331dlh_exit);
> > +
> > +MODULE_DESCRIPTION("lis331dlh accelerometer driver");
> > +MODULE_AUTHOR("STMicroelectronics");
> > +MODULE_LICENSE("GPL");
> > +
> > diff --git a/drivers/input/misc/lis331dlh.h
> > b/drivers/input/misc/lis331dlh.h
> > new file mode 100644
> > index 0000000..4ea008a
> > --- /dev/null
> > +++ b/drivers/input/misc/lis331dlh.h
> > @@ -0,0 +1,83 @@
> > +/******************** (C) COPYRIGHT 2010 STMicroelectronics
> > ********************
> > +*
> > +* File Name : lis331dlh.h
> > +* Authors : MSH - Motion Mems BU - Application Team
> > +* : Carmine Iascone (carmine.iascone@st.com)
> > +* : Matteo Dameno (matteo.dameno@st.com)
> > +* Version : V 1.0.0
> > +* Date : 08/11/2010
> > +* Description : LIS331DLH sensor API
> > +*
> >
> +**********************************************************************
> ***
> > *******
> > +*
> > +* This program is free software; you can redistribute it and/or
> modify
> > +* it under the terms of the GNU General Public License version 2 as
> > +* published by the Free Software Foundation.
> > +*
> > +* THE PRESENT SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT
> > WARRANTIES
> > +* OR CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED, FOR THE SOLE
> > +* PURPOSE TO SUPPORT YOUR APPLICATION DEVELOPMENT.
> > +* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
> > DIRECT,
> > +* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS
> ARISING
> > FROM THE
> > +* CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
> CODING
> > +* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
> > +*
> > +* THIS SOFTWARE IS SPECIFICALLY DESIGNED FOR EXCLUSIVE USE WITH ST
> PARTS.
> > +*
> >
> +**********************************************************************
> ***
> > ******/
> > +
> > +#ifndef __LIS331DLH_H__
> > +#define __LIS331DLH_H__
> > +
> > +#include <linux/types.h>
> > +
> > +/************************************************/
> > +/* Accelerometer section defines */
> > +/************************************************/
> > +
> > +/* Accelerometer Sensor Full Scale */
> > +#define LIS331DLH_G_2G 0x00
> > +#define LIS331DLH_G_4G 0x10
> > +#define LIS331DLH_G_8G 0x30
> > +
> > +/* Accelerometer Sensor Operating Mode */
> > +#define LIS331DLH_PM_OFF 0x00
> > +#define LIS331DLH_PM_NORMAL 0x20
> > +#define LIS331DLH_ENABLE_ALL_AXES 0x07
> > +
> > +/* Accelerometer output data rate */
> > +#define LIS331DLH_ODRHALF 0x40 /* 0.5Hz output data
> rate */
> > +#define LIS331DLH_ODR1 0x60 /* 1Hz output
> data rate */
> > +#define LIS331DLH_ODR2 0x80 /* 2Hz output
> data rate */
> > +#define LIS331DLH_ODR5 0xA0 /* 5Hz output
> data rate */
> > +#define LIS331DLH_ODR10 0xC0 /* 10Hz output
> data rate
> > */
> > +#define LIS331DLH_ODR50 0x00 /* 50Hz output
> data rate
> > */
> > +#define LIS331DLH_ODR100 0x08 /* 100Hz output data
> rate */
> > +#define LIS331DLH_ODR400 0x10 /* 400Hz output data
> rate */
> > +#define LIS331DLH_ODR1000 0x18 /* 1000Hz output data
> rate */
> > +
> > +#ifdef __KERNEL__
> > +struct lis331dlh_platform_data {
> > +
> > + int poll_interval;
> > + int min_interval;
> > +
> > + u8 g_range;
> > +
> > + u8 axis_map_x;
> > + u8 axis_map_y;
> > + u8 axis_map_z;
> > +
> > + u8 negate_x;
> > + u8 negate_y;
> > + u8 negate_z;
> > +
> > + int (*init)(void);
> > + void (*exit)(void);
> > + int (*power_on)(void);
> > + int (*power_off)(void);
> > +
> > +};
> > +#endif /* __KERNEL__ */
> > +
> > +#endif /* __LIS331DLH_H__ */
> > --
> > 1.5.4.3
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-
> input" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] input: misc: add lis331dlh driver
2010-11-11 13:03 ` Datta, Shubhrajyoti
2010-11-18 15:51 ` Carmine IASCONE
@ 2010-11-18 19:08 ` Jonathan Cameron
1 sibling, 0 replies; 4+ messages in thread
From: Jonathan Cameron @ 2010-11-18 19:08 UTC (permalink / raw)
To: Datta, Shubhrajyoti
Cc: mems applications, dmitry.torokhov@gmail.com,
carmine.iascone@st.com, matteo.dameno@st.com,
linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
Eric Piel
On 11/11/10 13:03, Datta, Shubhrajyoti wrote:
>
>
>> -----Original Message-----
>> From: linux-input-owner@vger.kernel.org [mailto:linux-input-
>> owner@vger.kernel.org] On Behalf Of mems applications
>> Sent: Thursday, November 11, 2010 5:28 PM
>> To: dmitry.torokhov@gmail.com
>> Cc: carmine.iascone@st.com; matteo.dameno@st.com; linux-
>> input@vger.kernel.org; linux-kernel@vger.kernel.org
>> Subject: [PATCH] input: misc: add lis331dlh driver
>>
>> Add STMicroelectronics LIS331DLH digital accelerometer device driver
Cc'd Eric Piel (I think this is the latest email related to this driver).
Key question for Eric is: Is this part already supported by your lis3vl02dq
driver? If not, is adding support simple enough to justify them sharing
a driver?
>>
>> Signed-off-by: Carmine Iascone <carmine.iascone@st.com>
>> ---
>> drivers/input/misc/Kconfig | 7 +
>> drivers/input/misc/Makefile | 2 +-
>> drivers/input/misc/lis331dlh.c | 836
>> ++++++++++++++++++++++++++++++++++++++++
>> drivers/input/misc/lis331dlh.h | 83 ++++
>> 4 files changed, 927 insertions(+), 1 deletions(-)
>> create mode 100644 drivers/input/misc/lis331dlh.c
>> create mode 100644 drivers/input/misc/lis331dlh.h
>>
>> diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
>> index b99b8cb..eb58bd3 100644
>> --- a/drivers/input/misc/Kconfig
>> +++ b/drivers/input/misc/Kconfig
>> @@ -448,4 +448,11 @@ config INPUT_ADXL34X_SPI
>> To compile this driver as a module, choose M here: the
>> module will be called adxl34x-spi.
>>
>> +config INPUT_LIS331DLH
>> + tristate "STMicroelectronics LIS331DLH Accelerometer"
>> + depends on I2C
>> + ---help---
>> + If you say yes here you get support for the STMicroelectronics
>> + LIS331DLH accelerometer sensor
>> +
>> endif
>> diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
>> index 1fe1f6c..819e1a3 100644
>> --- a/drivers/input/misc/Makefile
>> +++ b/drivers/input/misc/Makefile
>> @@ -23,6 +23,7 @@ obj-$(CONFIG_INPUT_DM355EVM) += dm355evm_keys.o
>> obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o
>> obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o
>> obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o
>> +obj-$(CONFIG_INPUT_LIS331DLH) += lis331dlh.o
>> obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o
>> obj-$(CONFIG_INPUT_MAX8925_ONKEY) += max8925_onkey.o
>> obj-$(CONFIG_INPUT_PCAP) += pcap_keys.o
>> @@ -42,4 +43,3 @@ obj-$(CONFIG_INPUT_WINBOND_CIR) += winbond-
>> cir.o
>> obj-$(CONFIG_INPUT_WISTRON_BTNS) += wistron_btns.o
>> obj-$(CONFIG_INPUT_WM831X_ON) += wm831x-on.o
>> obj-$(CONFIG_INPUT_YEALINK) += yealink.o
>> -
>> diff --git a/drivers/input/misc/lis331dlh.c
>> b/drivers/input/misc/lis331dlh.c
>> new file mode 100644
>> index 0000000..2b72c12
>> --- /dev/null
>> +++ b/drivers/input/misc/lis331dlh.c
>> @@ -0,0 +1,836 @@
>> +/******************** (C) COPYRIGHT 2010 STMicroelectronics
>> ********************
>> +*
>> +* File Name : lis331dlh.c
>> +* Authors : MSH - Motion Mems BU - Application Team
>> +* : Carmine Iascone (carmine.iascone@st.com)
>> +* : Matteo Dameno (matteo.dameno@st.com)
>> +* Version : V 1.0.0
>> +* Date : 08/11/2010
>> +* Description : LIS331DLH sensor API
>> +*
>> +*************************************************************************
>> *******
>> +*
>> +* This program is free software; you can redistribute it and/or modify
>> +* it under the terms of the GNU General Public License version 2 as
>> +* published by the Free Software Foundation.
>> +*
>> +* THE PRESENT SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT
>> WARRANTIES
>> +* OR CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED, FOR THE SOLE
>> +* PURPOSE TO SUPPORT YOUR APPLICATION DEVELOPMENT.
>> +* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
>> DIRECT,
>> +* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
>> FROM THE
>> +* CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
>> +* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
>> +*
>> +* THIS SOFTWARE IS SPECIFICALLY DESIGNED FOR EXCLUSIVE USE WITH ST PARTS.
>> +*
>> +*************************************************************************
>> *****/
>> +#include "lis331dlh.h"
>> +
>> +#include <linux/i2c.h>
>> +#include <linux/mutex.h>
>> +#include <linux/input-polldev.h>
>> +#include <linux/slab.h>
>> +
>> +
>> +#define LIS331DLH_DEV_NAME "lis331dlh"
>> +
>> +/** Maximum polled-device-reported g value */
>> +#define G_MAX 8000
>> +
>> +#define SHIFT_ADJ_2G 4
>> +#define SHIFT_ADJ_4G 3
>> +#define SHIFT_ADJ_8G 2
>> +
>> +#define AXISDATA_REG 0x28
>> +
>> +/* ctrl 1: pm2 pm1 pm0 dr1 dr0 zenable yenable zenable */
>> +#define CTRL_REG1 0x20 /* power control reg */
>> +#define CTRL_REG2 0x21 /* power control reg */
>> +#define CTRL_REG3 0x22 /* power control reg */
>> +#define CTRL_REG4 0x23 /* interrupt control reg */
>> +
>> +#define FUZZ 0
>> +#define FLAT 0
>> +#define I2C_RETRY_DELAY 5
>> +#define I2C_RETRIES 5
>> +#define AUTO_INCREMENT 0x80
>> +
>> +static struct {
>> + unsigned int cutoff;
>> + unsigned int mask;
>> +} odr_table[] = {
>> + {
>> + 3, LIS331DLH_PM_NORMAL | LIS331DLH_ODR1000}, {
>> + 10, LIS331DLH_PM_NORMAL | LIS331DLH_ODR400}, {
>> + 20, LIS331DLH_PM_NORMAL | LIS331DLH_ODR100}, {
>> + 100, LIS331DLH_PM_NORMAL | LIS331DLH_ODR50}, {
>> + 200, LIS331DLH_ODR1000 | LIS331DLH_ODR10}, {
>> + 500, LIS331DLH_ODR1000 | LIS331DLH_ODR5}, {
>> + 1000, LIS331DLH_ODR1000 | LIS331DLH_ODR2}, {
>> + 2000, LIS331DLH_ODR1000 | LIS331DLH_ODR1}, {
>> + 0, LIS331DLH_ODR1000 | LIS331DLH_ODRHALF},};
>> +
>> +struct lis331dlh_data {
>> + struct i2c_client *client;
>> + struct lis331dlh_platform_data *pdata;
>> +
>> + struct mutex lock;
>> +
>> + struct input_polled_dev *input_poll_dev;
>> +
>> + int hw_initialized;
>> + atomic_t enabled;
>> + int on_before_suspend;
>> +
>> + u8 reg_addr;
>> +
>> + u8 shift_adj;
>> + u8 resume_state[5];
>> +};
>> +
>> +/*
>> + * Because misc devices can not carry a pointer from driver register to
>> + * open, we keep this global. This limits the driver to a single
>> instance.
>> + */
>> +struct lis331dlh_data *lis331dlh_misc_data;
>> +
>> +static int lis331dlh_i2c_read(struct lis331dlh_data *acc,
>> + u8 *buf, int len)
>> +{
>> + int err;
>> +
>> + struct i2c_msg msgs[] = {
>> + {
>> + .addr = acc->client->addr,
>> + .flags = acc->client->flags & I2C_M_TEN,
>> + .len = 1,
>> + .buf = buf,
>> + },
>> + {
>> + .addr = acc->client->addr,
>> + .flags = (acc->client->flags & I2C_M_TEN) | I2C_M_RD,
>> + .len = len,
>> + .buf = buf,
>> + },
>> + };
>> +
>> + err = i2c_transfer(acc->client->adapter, msgs, 2);
>> +
>> + if (err != 2) {
>> + dev_err(&acc->client->dev, "read transfer error\n");
>> + err = -EIO;
>> + } else {
>> + err = 0;
>> + }
>> +
>> + return err;
>> +}
>> +
>> +static int lis331dlh_i2c_write(struct lis331dlh_data *acc,
>> + u8 *buf, int len)
>> +{
>> + int err;
>> +
>> + struct i2c_msg msgs[] = {
>> + {
>> + .addr = acc->client->addr,
>> + .flags = acc->client->flags & I2C_M_TEN,
>> + .len = len + 1,
>> + .buf = buf,
>> + },
>> + };
>> +
>> + err = i2c_transfer(acc->client->adapter, msgs, 1);
>> +
>> + if (err != 1) {
>> + dev_err(&acc->client->dev, "write transfer error\n");
>> + err = -EIO;
>> + } else {
>> + err = 0;
>> + }
>> +
>> + return err;
>> +}
>> +
>> +static int lis331dlh_hw_init(struct lis331dlh_data *acc)
>> +{
>> + int err = -1;
>> + u8 buf[6];
>> +
>> + buf[0] = (AUTO_INCREMENT | CTRL_REG1);
>> + buf[1] = acc->resume_state[0];
>> + buf[2] = acc->resume_state[1];
>> + buf[3] = acc->resume_state[2];
>> + buf[4] = acc->resume_state[3];
>> + buf[5] = acc->resume_state[4];
>> + err = lis331dlh_i2c_write(acc, buf, 5);
>> + if (err < 0)
>> + return err;
>> +
>> + acc->hw_initialized = 1;
>> +
>> + return 0;
>> +}
>> +
>> +static void lis331dlh_device_power_off(struct lis331dlh_data *acc)
>> +{
>> + int err;
>> + u8 buf[2] = { CTRL_REG1,
>> + LIS331DLH_PM_OFF | LIS331DLH_ENABLE_ALL_AXES };
>> +
>> + err = lis331dlh_i2c_write(acc, buf, 1);
>> + if (err < 0)
>> + dev_err(&acc->client->dev, "soft power off failed\n");
>> +
>> + if (acc->pdata->power_off)
>> + acc->pdata->power_off();
>> +
>> + acc->hw_initialized = 0;
>> +
>> +}
>> +
>> +static int lis331dlh_device_power_on(struct lis331dlh_data *acc)
>> +{
>> + int err;
>> +
>> + if (acc->pdata->power_on) {
>> + err = acc->pdata->power_on();
>> + if (err < 0)
>> + return err;
>> + }
>> +
>> + if (!acc->hw_initialized) {
>> + err = lis331dlh_hw_init(acc);
>> + if (err < 0) {
>> + lis331dlh_device_power_off(acc);
>> + return err;
>> + }
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +int lis331dlh_update_g_range(struct lis331dlh_data *acc, u8 new_g_range)
>> +{
>> + int err;
>> + u8 shift;
>> + u8 buf[2];
>> + switch (new_g_range) {
>> + case LIS331DLH_G_2G:
>> + shift = SHIFT_ADJ_2G;
>> + break;
>> + case LIS331DLH_G_4G:
>> + shift = SHIFT_ADJ_4G;
>> + break;
>> + case LIS331DLH_G_8G:
>> + shift = SHIFT_ADJ_8G;
>> + break;
>> + default:
>> + return -EINVAL;
>> + }
>> +
>> + if (atomic_read(&acc->enabled)) {
>> + /* Set configuration register 4, which contains g range
>> setting
>> + * NOTE: this is a straight overwrite because this driver
>> does
>> + * not use any of the other configuration bits in this
>> + * register. Should this become untrue, we will have to read
>> + * out the value and only change the relevant bits --XX----
>> + * (marked by X) */
>> + buf[0] = CTRL_REG4;
>> + buf[1] = new_g_range;
>> + err = lis331dlh_i2c_write(acc, buf, 1);
>> + if (err < 0)
>> + return err;
>> + }
>> +
>> + acc->resume_state[3] = new_g_range;
>> + acc->shift_adj = shift;
>> +
>> + return 0;
>> +}
>> +
>> +int lis331dlh_update_odr(struct lis331dlh_data *acc, int poll_interval)
>> +{
>> + int err = -1;
>> + int i;
>> + u8 config[2];
>> +
>> + /* Convert the poll interval into an output data rate configuration
>> + * that is as low as possible. The ordering of these checks must
>> be
>> + * maintained due to the cascading cut off values - poll intervals
>> are
>> + * checked from shortest to longest. At each check, if the next
>> lower
>> + * ODR cannot support the current poll interval, we stop searching
>> */
>> + for (i = 0; i < ARRAY_SIZE(odr_table); i++) {
>> + config[1] = odr_table[i].mask;
>> + if (poll_interval < odr_table[i].cutoff)
>> + break;
>> + }
>> +
>> + config[1] |= LIS331DLH_ENABLE_ALL_AXES;
>> +
>> + /* If device is currently enabled, we need to write new
>> + * configuration out to it */
>> + if (atomic_read(&acc->enabled)) {
>> + config[0] = CTRL_REG1;
>> + err = lis331dlh_i2c_write(acc, config, 1);
>> + if (err < 0)
>> + return err;
>> + }
>> +
>> + acc->resume_state[0] = config[1];
>> +
>> + return 0;
>> +}
>> +
>> +static int decode(u8 *p, int adj)
>> +{
>> + s16 v = p[0] | (p[1] << 8);
>> + return (int) v >> adj;
>> +}
>> +
>> +static int lis331dlh_get_data(struct lis331dlh_data *acc,
>> + int *xyz)
>> +{
>> + int err = -1;
>> + /* Data bytes from hardware xL, xH, yL, yH, zL, zH */
>> + u8 acc_data[6];
>> + /* x,y,z hardware data */
>> + int hw_d[3] = { 0 };
>> +
>> + acc_data[0] = (AUTO_INCREMENT | AXISDATA_REG);
>> + err = lis331dlh_i2c_read(acc, acc_data, 6);
>> + if (err < 0)
>> + return err;
>> +
>> + hw_d[0] = decode(acc_data, acc->shift_adj);
>> + hw_d[1] = decode(acc_data + 2, acc->shift_adj);
>> + hw_d[2] = decode(acc_data + 4, acc->shift_adj);
>> +
>> + xyz[0] = ((acc->pdata->negate_x) ? (-hw_d[acc->pdata->axis_map_x])
>> + : (hw_d[acc->pdata->axis_map_x]));
>> + xyz[1] = ((acc->pdata->negate_y) ? (-hw_d[acc->pdata->axis_map_y])
>> + : (hw_d[acc->pdata->axis_map_y]));
>> + xyz[2] = ((acc->pdata->negate_z) ? (-hw_d[acc->pdata->axis_map_z])
>> + : (hw_d[acc->pdata->axis_map_z]));
>> +
>> + return err;
>> +}
>> +
>> +static void lis331dlh_report_values(struct lis331dlh_data *acc,
>> + int *xyz)
>> +{
>> + struct input_dev *input = acc->input_poll_dev->input;
>> + input_report_abs(input, ABS_X, xyz[0]);
>> + input_report_abs(input, ABS_Y, xyz[1]);
>> + input_report_abs(input, ABS_Z, xyz[2]);
>> + input_sync(input);
>> +}
>> +
>> +static int lis331dlh_enable(struct lis331dlh_data *acc)
>> +{
>> + int err;
>> +
>> + if (!atomic_cmpxchg(&acc->enabled, 0, 1)) {
>> +
>> + err = lis331dlh_device_power_on(acc);
>> + if (err < 0) {
>> + atomic_set(&acc->enabled, 0);
>> + return err;
>> + }
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int lis331dlh_disable(struct lis331dlh_data *acc)
>> +{
>> + if (atomic_cmpxchg(&acc->enabled, 1, 0))
>> + lis331dlh_device_power_off(acc);
>> +
>> + return 0;
>> +}
>> +
>> +static ssize_t attr_get_polling_rate(struct device *dev,
>> + struct device_attribute *attr,
>> + char *buf)
>> +{
>> + struct lis331dlh_data *acc = dev_get_drvdata(dev);
>> + int val;
>> + mutex_lock(&acc->lock);
>> + val = acc->pdata->poll_interval;
>> + mutex_unlock(&acc->lock);
>> + return sprintf(buf, "%d\n", val);
>> +}
>> +
>> +static ssize_t attr_set_polling_rate(struct device *dev,
>> + struct device_attribute *attr,
>> + const char *buf, size_t size)
>> +{
>> + struct lis331dlh_data *acc = dev_get_drvdata(dev);
>> + unsigned long interval_ms;
>> +
>> + if (strict_strtoul(buf, 10, &interval_ms))
>> + return -EINVAL;
>> + if (!interval_ms)
>> + return -EINVAL;
>> + mutex_lock(&acc->lock);
>> + acc->pdata->poll_interval = interval_ms;
>> + lis331dlh_update_odr(acc, interval_ms);
>> + mutex_unlock(&acc->lock);
>> + return size;
>> +}
>> +
>> +static ssize_t attr_get_range(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct lis331dlh_data *acc = dev_get_drvdata(dev);
>> + char range;
>> + char val;
>> + mutex_lock(&acc->lock);
>> + val = acc->pdata->g_range ;
>> + switch (val) {
>> + case LIS331DLH_G_2G:
>> + range = 2;
>> + break;
>> + case LIS331DLH_G_4G:
>> + range = 4;
>> + break;
>> + case LIS331DLH_G_8G:
>> + range = 8;
>> + break;
>> + default:
>> + range = 2;
>> + break;
>> + }
>> + mutex_unlock(&acc->lock);
>> + return sprintf(buf, "%d\n", range);
>> +}
>> +
>> +static ssize_t attr_set_range(struct device *dev,
>> + struct device_attribute *attr,
>> + const char *buf, size_t size)
>> +{
>> + struct lis331dlh_data *acc = dev_get_drvdata(dev);
>> + unsigned long val;
>> + if (strict_strtoul(buf, 10, &val))
>> + return -EINVAL;
>> + mutex_lock(&acc->lock);
>> + acc->pdata->g_range = val;
>> + lis331dlh_update_g_range(acc, val);
>> + mutex_unlock(&acc->lock);
>> + return size;
>> +}
>> +
>> +static ssize_t attr_get_enable(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct lis331dlh_data *acc = dev_get_drvdata(dev);
>> + int val = atomic_read(&acc->enabled);
>> + return sprintf(buf, "%d\n", val);
>> +}
>> +
>> +static ssize_t attr_set_enable(struct device *dev,
>> + struct device_attribute *attr,
>> + const char *buf, size_t size)
>> +{
>> + struct lis331dlh_data *acc = dev_get_drvdata(dev);
>> + unsigned long val;
>> +
>> + if (strict_strtoul(buf, 10, &val))
>> + return -EINVAL;
>> +
>> + if (val)
>> + lis331dlh_enable(acc);
>> + else
>> + lis331dlh_disable(acc);
>> +
>> + return size;
>> +}
>> +
>> +static ssize_t attr_reg_set(struct device *dev, struct device_attribute
>> *attr,
>> + const char *buf, size_t size)
>> +{
>> + int rc;
>> + struct lis331dlh_data *acc = dev_get_drvdata(dev);
>> + u8 x[2];
>> + unsigned long val;
>> +
>> + if (strict_strtoul(buf, 16, &val))
>> + return -EINVAL;
>> + mutex_lock(&acc->lock);
>> + x[0] = acc->reg_addr;
>> + mutex_unlock(&acc->lock);
>> + x[1] = val;
>> + rc = lis331dlh_i2c_write(acc, x, 1);
>> + return size;
>> +}
>> +
>> +static ssize_t attr_reg_get(struct device *dev, struct device_attribute
>> *attr,
>> + char *buf)
>> +{
>> + ssize_t ret;
>> + struct lis331dlh_data *acc = dev_get_drvdata(dev);
>> + int rc;
>> + u8 data;
>> +
>> + mutex_lock(&acc->lock);
>> + data = acc->reg_addr;
>> + mutex_unlock(&acc->lock);
>> + rc = lis331dlh_i2c_read(acc, &data, 1);
>> + ret = sprintf(buf, "0x%02x\n", data);
>> + return ret;
>> +}
>> +
>> +static ssize_t attr_addr_set(struct device *dev, struct device_attribute
>> *attr,
>> + const char *buf, size_t size)
>> +{
>> + struct lis331dlh_data *acc = dev_get_drvdata(dev);
>> + unsigned long val;
>> + if (strict_strtoul(buf, 16, &val))
>> + return -EINVAL;
>> + mutex_lock(&acc->lock);
>> + acc->reg_addr = val;
>> + mutex_unlock(&acc->lock);
>> + return size;
>> +}
>> +
>> +static struct device_attribute attributes[] = {
>> + __ATTR(pollrate_ms, 0666, attr_get_polling_rate,
>> attr_set_polling_rate),
>> + __ATTR(range, 0666, attr_get_range, attr_set_range),
>> + __ATTR(enable, 0666, attr_get_enable, attr_set_enable),
>> + __ATTR(reg_value, 0600, attr_reg_get, attr_reg_set),
>> + __ATTR(reg_addr, 0200, NULL, attr_addr_set),
>> +};
>> +
>> +static int create_sysfs_interfaces(struct device *dev)
>> +{
>> + int i;
>> + for (i = 0; i < ARRAY_SIZE(attributes); i++)
>> + if (device_create_file(dev, attributes + i))
>> + goto error;
>> + return 0;
>> +
>> +error:
>> + for ( ; i >= 0; i--)
>> + device_remove_file(dev, attributes + i);
>> + dev_err(dev, "%s:Unable to create interface\n", __func__);
>> + return -1;
>> +}
>> +
>> +static int remove_sysfs_interfaces(struct device *dev)
>> +{
>> + int i;
>> + for (i = 0; i < ARRAY_SIZE(attributes); i++)
>> + device_remove_file(dev, attributes + i);
>> + return 0;
>> +}
>> +
>> +
>> +static void lis331dlh_input_poll_func(struct input_polled_dev *dev)
>> +{
>> + struct lis331dlh_data *acc = dev->private;
>> +
>> + int xyz[3] = { 0 };
>> + int err;
>> +
>> + /* acc = container_of((struct delayed_work *)work,
>> + struct lis331dlh_data, input_work); */
>> +
>> + mutex_lock(&acc->lock);
>> + err = lis331dlh_get_data(acc, xyz);
>> + if (err < 0)
>> + dev_err(&acc->client->dev, "get_acceleration_data failed\n");
>> + else
>> + lis331dlh_report_values(acc, xyz);
>> +
>> + mutex_unlock(&acc->lock);
>> +}
>> +
>> +int lis331dlh_input_open(struct input_dev *input)
>> +{
>> + struct lis331dlh_data *acc = input_get_drvdata(input);
>> +
>> + return lis331dlh_enable(acc);
>> +}
>> +
>> +void lis331dlh_input_close(struct input_dev *dev)
>> +{
>> + struct lis331dlh_data *acc = input_get_drvdata(dev);
>> +
>> + lis331dlh_disable(acc);
>> +}
>> +
>> +static int lis331dlh_validate_pdata(struct lis331dlh_data *acc)
>> +{
>> + acc->pdata->poll_interval = max(acc->pdata->poll_interval,
>> + acc->pdata->min_interval);
>> +
>> + if (acc->pdata->axis_map_x > 2 ||
>> + acc->pdata->axis_map_y > 2 || acc->pdata->axis_map_z > 2) {
>> + dev_err(&acc->client->dev,
>> + "invalid axis_map value x:%u y:%u z%u\n",
>> + acc->pdata->axis_map_x, acc->pdata->axis_map_y,
>> + acc->pdata->axis_map_z);
>> + return -EINVAL;
>> + }
>> +
>> + /* Only allow 0 and 1 for negation boolean flag */
>> + if (acc->pdata->negate_x > 1 || acc->pdata->negate_y > 1 ||
>> + acc->pdata->negate_z > 1) {
>> + dev_err(&acc->client->dev,
>> + "invalid negate value x:%u y:%u z:%u\n",
>> + acc->pdata->negate_x, acc->pdata->negate_y,
>> + acc->pdata->negate_z);
>> + return -EINVAL;
>> + }
>> +
>> + /* Enforce minimum polling interval */
>> + if (acc->pdata->poll_interval < acc->pdata->min_interval) {
>> + dev_err(&acc->client->dev, "minimum poll interval
>> violated\n");
>> + return -EINVAL;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int lis331dlh_input_init(struct lis331dlh_data *acc)
>> +{
>> + int err;
>> + struct input_dev *input;
>> +
>> + acc->input_poll_dev = input_allocate_polled_device();
>> + if (!acc->input_poll_dev) {
>> + err = -ENOMEM;
>> + dev_err(&acc->client->dev, "input device allocate failed\n");
>> + goto err0;
>> + }
>
> why a polled_device is preferred over input device?
>
>> +
>> + /* set input-polldev handlers */
>> + acc->input_poll_dev->private = acc;
>> + acc->input_poll_dev->poll = lis331dlh_input_poll_func;
>> + acc->input_poll_dev->poll_interval = acc->pdata->poll_interval;
>> +
>> + input = acc->input_poll_dev->input;
>> +
>> + input->open = lis331dlh_input_open;
>> + input->close = lis331dlh_input_close;
>> + input->name = LIS331DLH_DEV_NAME;
>> + input->id.bustype = BUS_I2C;
>> + input->dev.parent = &acc->client->dev;
>> +
>> + input_set_drvdata(acc->input_poll_dev->input, acc);
>> +
>> + set_bit(EV_ABS, input->evbit);
>> +
>> + input_set_abs_params(input, ABS_X, -G_MAX, G_MAX, FUZZ, FLAT);
>> + input_set_abs_params(input, ABS_Y, -G_MAX, G_MAX, FUZZ, FLAT);
>> + input_set_abs_params(input, ABS_Z, -G_MAX, G_MAX, FUZZ, FLAT);
>> +
>> + input->name = "accelerometer";
>> +
>> + err = input_register_polled_device(acc->input_poll_dev);
>> + if (err) {
>> + dev_err(&acc->client->dev,
>> + "unable to register input polled device %s\n",
>> + acc->input_poll_dev->input->name);
>> + goto err1;
>> + }
>> +
>> + return 0;
>> +
>> +err1:
>> + input_free_polled_device(acc->input_poll_dev);
>> +err0:
>> + return err;
>> +}
>> +
>> +static void lis331dlh_input_cleanup(struct lis331dlh_data *acc)
>> +{
>> + input_unregister_polled_device(acc->input_poll_dev);
>> + input_free_polled_device(acc->input_poll_dev);
>> +}
>> +
>> +static int lis331dlh_probe(struct i2c_client *client,
>> + const struct i2c_device_id *id)
> Do you need it after init?
>
>> +{
>> + struct lis331dlh_data *acc;
>> + int err = -1;
>> +
>> + if (client->dev.platform_data == NULL) {
>> + dev_err(&client->dev, "platform data is NULL. exiting.\n");
>> + err = -ENODEV;
>> + goto err0;
>> + }
>> +
>> + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
>> + dev_err(&client->dev, "client not i2c capable\n");
>> + err = -ENODEV;
>> + goto err0;
>> + }
>> +
>> + acc = kzalloc(sizeof(*acc), GFP_KERNEL);
>> + if (acc == NULL) {
>> + dev_err(&client->dev,
>> + "failed to allocate memory for module data\n");
>> + err = -ENOMEM;
>> + goto err0;
>> + }
>> +
>> + mutex_init(&acc->lock);
>> + mutex_lock(&acc->lock);
>> + acc->client = client;
>> +
>> + acc->pdata = kmalloc(sizeof(*acc->pdata), GFP_KERNEL);
>> + if (acc->pdata == NULL)
>> + goto err1;
>> +
>> + memcpy(acc->pdata, client->dev.platform_data, sizeof(*acc->pdata));
>> +
>> + err = lis331dlh_validate_pdata(acc);
>> + if (err < 0) {
>> + dev_err(&client->dev, "failed to validate platform data\n");
>> + goto err1_1;
>> + }
>> +
>> + i2c_set_clientdata(client, acc);
>> +
>> + if (acc->pdata->init) {
>> + err = acc->pdata->init();
>> + if (err < 0)
>> + goto err1_1;
>> + }
>> +
>> + memset(acc->resume_state, 0, ARRAY_SIZE(acc->resume_state));
>> +
>> + acc->resume_state[0] = 0x27;
>> + acc->resume_state[1] = 0x00;
>> + acc->resume_state[2] = 0x00;
>> + acc->resume_state[3] = 0x00;
>> + acc->resume_state[4] = 0x00;
>> +
>> + err = lis331dlh_device_power_on(acc);
>> + if (err < 0)
>> + goto err2;
> What does power on do ? Do you think it make sense for open/close.
> Just curious not a comment.
>
>> +
>> + atomic_set(&acc->enabled, 1);
>> +
>> + err = lis331dlh_update_g_range(acc, arioucc->pdata->g_range);
>> + if (err < 0) {
>> + dev_err(&client->dev, "update_g_range failed\n");
>> + goto err2;
>> + }
>> +
>> + err = lis331dlh_update_odr(acc, acc->pdata->poll_interval);
>> + if (err < 0) {
>> + dev_err(&client->dev, "update_odr failed\n");
>> + goto err2;
>> + }
>> +
>> + err = lis331dlh_input_init(acc);
>> + if (err < 0)
>> + goto err3;
>> +
>> + err = create_sysfs_interfaces(&client->dev);
>> + if (err < 0) {
>> + dev_err(&client->dev, "lsm_acc_device register failed\n");
>> + goto err4;
>> + }
>> +
>> + lis331dlh_device_power_off(acc);
>> +
>> + /* As default, do not report information */
>> + atomic_set(&acc->enabled, 0);
>> +
>> + mutex_unlock(&acc->lock);
>> +
>> + dev_info(&client->dev, "lis331dlh probed\n");
>> +
>> + return 0;
>> +
>> +err4:
>> + lis331dlh_input_cleanup(acc);
>> +err3:
>> + lis331dlh_device_power_off(acc);
>> +err2:
>> + if (acc->pdata->exit)
>> + acc->pdata->exit();
>> +err1_1:
>> + mutex_unlock(&acc->lock);
>> + kfree(acc->pdata);
>> +err1:
>> + kfree(acc);
>> +err0:
>> + return err;
>> +}
>> +
>> +static int __devexit lis331dlh_remove(struct i2c_client *client)
>> +{
>> + /* TODO: revisit ordering here once _probe order is finalized */
>> + struct lis331dlh_data *acc = i2c_get_clientdata(client);
>> + lis331dlh_input_cleanup(acc);
>> + lis331dlh_device_power_off(acc);
>> + remove_sysfs_interfaces(&client->dev);
>> + if (acc->pdata->exit)
>> + acc->pdata->exit();
>> + kfree(acc->pdata);
>> + kfree(acc);
>> +
>> + return 0;
>> +}
>> +
>> +static int lis331dlh_resume(struct i2c_client *client)
>> +{
>> + struct lis331dlh_data *acc = i2c_get_clientdata(client);
>> +
>> + if (acc->on_before_suspend)
>> + return lis331dlh_enable(acc);
>> + return 0;
>> +}
>> +
>> +static int lis331dlh_suspend(struct i2c_client *client, pm_message_t
>> mesg)
>> +{
>> + struct lis331dlh_data *acc = i2c_get_clientdata(client);
>> +
>> + acc->on_before_suspend = atomic_read(&acc->enabled);
>> + return lis331dlh_disable(acc);
>> +}
>> +
>> +static const struct i2c_device_id lis331dlh_id[] = {
>> + {LIS331DLH_DEV_NAME, 0},
>> + {},
>> +};
>> +
>> +MODULE_DEVICE_TABLE(i2c, lis331dlh_id);
>> +
>> +static struct i2c_driver lis331dlh_driver = {
>> + .driver = {
>> + .name = LIS331DLH_DEV_NAME,
>> + .owner = THIS_MODULE,
>> + },
>> + .probe = lis331dlh_probe,
>> + .remove = __devexit_p(lis331dlh_remove),
>> + .resume = lis331dlh_resume,
>> + .suspend = lis331dlh_suspend,
>
> You may consider Pm.suspend resume
>> + .id_table = lis331dlh_id,
>> +};
>> +
>> +static int __init lis331dlh_init(void)
>> +{
>> + pr_debug("LIS331DLH driver for the accelerometer part\n");
>> + return i2c_add_driver(&lis331dlh_driver);
>> +}
>> +
>> +static void __exit lis331dlh_exit(void)
>> +{
>> + i2c_del_driver(&lis331dlh_driver);
>> + return;
>> +}
>> +
>> +module_init(lis331dlh_init);
>> +module_exit(lis331dlh_exit);
>> +
>> +MODULE_DESCRIPTION("lis331dlh accelerometer driver");
>> +MODULE_AUTHOR("STMicroelectronics");
>> +MODULE_LICENSE("GPL");
>> +
>> diff --git a/drivers/input/misc/lis331dlh.h
>> b/drivers/input/misc/lis331dlh.h
>> new file mode 100644
>> index 0000000..4ea008a
>> --- /dev/null
>> +++ b/drivers/input/misc/lis331dlh.h
>> @@ -0,0 +1,83 @@
>> +/******************** (C) COPYRIGHT 2010 STMicroelectronics
>> ********************
>> +*
>> +* File Name : lis331dlh.h
>> +* Authors : MSH - Motion Mems BU - Application Team
>> +* : Carmine Iascone (carmine.iascone@st.com)
>> +* : Matteo Dameno (matteo.dameno@st.com)
>> +* Version : V 1.0.0
>> +* Date : 08/11/2010
>> +* Description : LIS331DLH sensor API
>> +*
>> +*************************************************************************
>> *******
>> +*
>> +* This program is free software; you can redistribute it and/or modify
>> +* it under the terms of the GNU General Public License version 2 as
>> +* published by the Free Software Foundation.
>> +*
>> +* THE PRESENT SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT
>> WARRANTIES
>> +* OR CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED, FOR THE SOLE
>> +* PURPOSE TO SUPPORT YOUR APPLICATION DEVELOPMENT.
>> +* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
>> DIRECT,
>> +* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
>> FROM THE
>> +* CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
>> +* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
>> +*
>> +* THIS SOFTWARE IS SPECIFICALLY DESIGNED FOR EXCLUSIVE USE WITH ST PARTS.
>> +*
>> +*************************************************************************
>> ******/
>> +
>> +#ifndef __LIS331DLH_H__
>> +#define __LIS331DLH_H__
>> +
>> +#include <linux/types.h>
>> +
>> +/************************************************/
>> +/* Accelerometer section defines */
>> +/************************************************/
>> +
>> +/* Accelerometer Sensor Full Scale */
>> +#define LIS331DLH_G_2G 0x00
>> +#define LIS331DLH_G_4G 0x10
>> +#define LIS331DLH_G_8G 0x30
>> +
>> +/* Accelerometer Sensor Operating Mode */
>> +#define LIS331DLH_PM_OFF 0x00
>> +#define LIS331DLH_PM_NORMAL 0x20
>> +#define LIS331DLH_ENABLE_ALL_AXES 0x07
>> +
>> +/* Accelerometer output data rate */
>> +#define LIS331DLH_ODRHALF 0x40 /* 0.5Hz output data rate */
>> +#define LIS331DLH_ODR1 0x60 /* 1Hz output data rate */
>> +#define LIS331DLH_ODR2 0x80 /* 2Hz output data rate */
>> +#define LIS331DLH_ODR5 0xA0 /* 5Hz output data rate */
>> +#define LIS331DLH_ODR10 0xC0 /* 10Hz output data rate
>> */
>> +#define LIS331DLH_ODR50 0x00 /* 50Hz output data rate
>> */
>> +#define LIS331DLH_ODR100 0x08 /* 100Hz output data rate */
>> +#define LIS331DLH_ODR400 0x10 /* 400Hz output data rate */
>> +#define LIS331DLH_ODR1000 0x18 /* 1000Hz output data rate */
>> +
>> +#ifdef __KERNEL__
>> +struct lis331dlh_platform_data {
>> +
>> + int poll_interval;
>> + int min_interval;
>> +
>> + u8 g_range;
>> +
>> + u8 axis_map_x;
>> + u8 axis_map_y;
>> + u8 axis_map_z;
>> +
>> + u8 negate_x;
>> + u8 negate_y;
>> + u8 negate_z;
>> +
>> + int (*init)(void);
>> + void (*exit)(void);
>> + int (*power_on)(void);
>> + int (*power_off)(void);
>> +
>> +};
>> +#endif /* __KERNEL__ */
>> +
>> +#endif /* __LIS331DLH_H__ */
>> --
>> 1.5.4.3
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-input" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2010-11-18 19:01 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-11-11 11:58 [PATCH] input: misc: add lis331dlh driver mems applications
2010-11-11 13:03 ` Datta, Shubhrajyoti
2010-11-18 15:51 ` Carmine IASCONE
2010-11-18 19:08 ` Jonathan Cameron
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox