Re: [PATCH net-next-2.6 v3] can: Topcliff: PCH_CAN driver: Add Flow control,

[Marc Kleine-Budde <mkl@pengutronix.de>]

[-- Attachment #1: Type: text/plain, Size: 1795 bytes --]

On 11/24/2010 01:09 AM, Tomoya MORINAGA wrote:
> On Monday, November 22, 2010 5:27 PM, Marc Kleine-Budde wrote:
>>>>>> Still we have the busy waiting in the TX path. Maybe you can move the
>>>>>> waiting before accessing the if[1] and remove the busy waiting here.
>>>>> I can't understand your saying.
>>>>> For transmitting data, calling pch_can_rw_msg_obj is mandatory.
>>>> Yes, but the busy wait is not needed. It should be enough to do the
>>>> busy-waiting _before_ accessing the if[1].
>>>
>>> Do you mean we should create other pch_can_rw_msg_obj which doesn't have busy wait ?
>> ACK, and this non busy waiting is use in the TX path. But you add a busy
>> wait only function before accessing the if[1] in the TX path.
> 
> The "busy waiting" of pch_can_rw_msg_obj is for next processing accesses to Message object.
> If deleting this busy waiting, next processing can access to Message object, regardless previous transfer doesn't
> complete yet.
> Thus, I think, the "busy waiting" is necessary.

Yes, it's necessary, but not where it is done currently.
Let me outline how I think the TX path should look like:

pch_xmit() {
	take_care_about_flow_control();
	prepare_can_frame_to_be_copied_to_tx_if();

	/* most likely we don't have to wait here */
	wait_until_tx_if_is_ready();

	copy_can_frame_to_tx_if();

	/* trigger tx in hardware */
	send_tx_if_but_dont_do_busywait();

	/* tx_if is busy now, but before we access it, we'll check tx_if is ready */
}

cheers, Marc

-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 262 bytes --]