From: Sid Boyce <sboyce@blueyonder.co.uk>
To: LKML Mailing List <linux-kernel@vger.kernel.org>,
opensuse factory list <opensuse-factory@opensuse.org>
Subject: 2.6.37-rc3-git installed modules zero bytes long
Date: Tue, 30 Nov 2010 14:59:55 +0000 [thread overview]
Message-ID: <4CF5116B.8040204@blueyonder.co.uk> (raw)
openSUSE 11.3 on one box and openSUSE 11.4 Milestone 4 on the other.
I have a message that says the built modules not found. When I check
e.g /lib/modules/2.7.37-rc3-git7-smp, most modules are zero bytes long.
I have to "make modules_install" and use modprobe on each.
To get the network up on the 11.3 box "modprobe r6189" then "rcnetwork
restart", "modprobe rtl8187", "/etc/init.d/network-remotefs start",
etc., etc.
Then ifconfig is OK for those devices.
eth_s1_0 Link encap:Ethernet HWaddr 00:1C:F0:BB:14:E1
inet addr:192.168.10.10 Bcast:192.168.10.255 Mask:255.255.255.0
inet6 addr: fe80::21c:f0ff:febb:14e1/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1927 errors:0 dropped:0 overruns:0 frame:0
TX packets:1923 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:287532 (280.7 Kb) TX bytes:283044 (276.4 Kb)
Interrupt:17 Base address:0xe000
wlan0 Link encap:Ethernet HWaddr 00:15:AF:23:04:37
inet addr:192.168.1.4 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::215:afff:fe23:437/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:25 errors:0 dropped:0 overruns:0 frame:0
TX packets:62 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:4324 (4.2 Kb) TX bytes:18470 (18.0 Kb)
On 11.3 module-init-tools-3.12-1.3.x86_64
On 11.4 Milestone 4 module-init-tools-3.12-5.3.x86_64
tindog:/usr/src/linux-2.6.37-rc3-git7 # grep MODULE .config
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODULE_SRCVERSION_ALL=y
Another guy has emailed me saying he's seen the same.
11.3
====
gcc version 4.5.0 20100604 [gcc-4_5-branch revision 160292] (SUSE Linux)
11.4 Milestone 4
================
gcc version 4.5.1 20101116 [gcc-4_5-branch revision 166793] (SUSE Linux)
Regards
Sid.
--
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
Senior Staff Specialist, Cricket Coach
Microsoft Windows Free Zone - Linux used for all Computing Tasks
next reply other threads:[~2010-11-30 15:00 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-30 14:59 Sid Boyce [this message]
2010-11-30 15:48 ` 2.6.37-rc3-git installed modules zero bytes long Américo Wang
[not found] ` <4CF53364.1090807@blueyonder.co.uk>
2010-12-01 6:07 ` Américo Wang
2010-12-01 14:48 ` Sid Boyce
2011-02-26 1:41 ` Sid Boyce
2011-02-26 3:16 ` Sid Boyce
2011-03-01 17:54 ` 2.6.37-rc3-git installed modules zero bytes long - only on root xfs Sid Boyce
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4CF5116B.8040204@blueyonder.co.uk \
--to=sboyce@blueyonder.co.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=opensuse-factory@opensuse.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox