From: Yinghai Lu <yinghai@kernel.org>
To: Thomas Gleixner <tglx@linutronix.de>, Ingo Molnar <mingo@elte.hu>,
"H. Peter Anvin" <hpa@zytor.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>,
"Eric W. Biederman" <ebiederm@xmission.com>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: [PATCH 2/5] x86, apic: Remove early_init_lapic_mapping
Date: Tue, 07 Dec 2010 00:55:29 -0800 [thread overview]
Message-ID: <4CFDF681.3030509@kernel.org> (raw)
In-Reply-To: <4CFDF544.8020309@kernel.org>
It is almost the same as smp_register_lapic_addr()
Just need to make smp_read_mpc() call smp_register_lapic_addr when early==1.
also add printing out in smp_register_lapic_address()
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
arch/x86/include/asm/apic.h | 1 -
arch/x86/kernel/apic/apic.c | 24 ++----------------------
arch/x86/kernel/mpparse.c | 8 ++------
arch/x86/mm/amdtopology_64.c | 1 -
4 files changed, 4 insertions(+), 30 deletions(-)
Index: linux-2.6/arch/x86/mm/amdtopology_64.c
===================================================================
--- linux-2.6.orig/arch/x86/mm/amdtopology_64.c
+++ linux-2.6/arch/x86/mm/amdtopology_64.c
@@ -66,7 +66,6 @@ static __init void early_get_boot_cpu_id
if (smp_found_config)
early_get_smp_config();
#endif
- early_init_lapic_mapping();
}
int __init amd_get_nodes(struct bootnode *physnodes)
Index: linux-2.6/arch/x86/kernel/apic/apic.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/apic/apic.c
+++ linux-2.6/arch/x86/kernel/apic/apic.c
@@ -1625,28 +1625,6 @@ no_apic:
}
#endif
-#ifdef CONFIG_X86_64
-void __init early_init_lapic_mapping(void)
-{
- /*
- * If no local APIC can be found then go out
- * : it means there is no mpatable and MADT
- */
- if (!smp_found_config)
- return;
-
- set_fixmap_nocache(FIX_APIC_BASE, mp_lapic_addr);
- apic_printk(APIC_VERBOSE, "mapped APIC to %16lx (%16lx)\n",
- APIC_BASE, mp_lapic_addr);
-
- /*
- * Fetch the APIC ID of the BSP in case we have a
- * default configuration (or the MP table is broken).
- */
- boot_cpu_physical_apicid = read_apic_id();
-}
-#endif
-
/**
* init_apic_mappings - initialize APIC mappings
*/
@@ -1702,6 +1680,8 @@ void __init register_lapic_address(unsig
mp_lapic_addr = address;
set_fixmap_nocache(FIX_APIC_BASE, address);
+ apic_printk(APIC_VERBOSE, "mapped APIC to %16lx (%16lx)\n",
+ APIC_BASE, mp_lapic_addr);
if (boot_cpu_physical_apicid == -1U) {
boot_cpu_physical_apicid = read_apic_id();
apic_version[boot_cpu_physical_apicid] =
Index: linux-2.6/arch/x86/kernel/mpparse.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/mpparse.c
+++ linux-2.6/arch/x86/kernel/mpparse.c
@@ -289,17 +289,13 @@ static int __init smp_read_mpc(struct mp
#ifdef CONFIG_X86_32
generic_mps_oem_check(mpc, oem, str);
#endif
- /* save the local APIC address, it might be non-default */
+ /* Initialize the lapic mapping */
if (!acpi_lapic)
- mp_lapic_addr = mpc->lapic;
+ register_lapic_address(mpc->lapic);
if (early)
return 1;
- /* Initialize the lapic mapping */
- if (!acpi_lapic)
- register_lapic_address(mpc->lapic);
-
if (mpc->oemptr)
x86_init.mpparse.smp_read_mpc_oem(mpc);
Index: linux-2.6/arch/x86/include/asm/apic.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/apic.h
+++ linux-2.6/arch/x86/include/asm/apic.h
@@ -245,7 +245,6 @@ extern int apic_force_enable(void);
* On 32bit this is mach-xxx local
*/
#ifdef CONFIG_X86_64
-extern void early_init_lapic_mapping(void);
extern int apic_is_clustered_box(void);
#else
static inline int apic_is_clustered_box(void)
next prev parent reply other threads:[~2010-12-07 8:56 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <4CFDF544.8020309@kernel.org>
2010-12-07 8:55 ` [PATCH 1/5] x86, apic: Merge two register_lapic_address() Yinghai Lu
2010-12-09 20:54 ` [tip:x86/apic-cleanups] x86, apic: Unify identical register_lapic_address() functions tip-bot for Yinghai Lu
2010-12-07 8:55 ` Yinghai Lu [this message]
2010-12-09 20:55 ` [tip:x86/apic-cleanups] x86, apic: Remove early_init_lapic_mapping() tip-bot for Yinghai Lu
2010-12-07 8:55 ` [PATCH 3/5] x86, apic: Use register_lapic_address in init_apic_mapping Yinghai Lu
2010-12-09 20:55 ` [tip:x86/apic-cleanups] x86, apic: Use register_lapic_address() in init_apic_mapping() tip-bot for Yinghai Lu
2010-12-07 8:55 ` [PATCH 4/5] x86, sfi: Use register_lapic_address() Yinghai Lu
2010-12-09 20:55 ` [tip:x86/apic-cleanups] " tip-bot for Yinghai Lu
2010-12-07 8:55 ` [PATCH 5/5] x86, x2apic: Don't map lapic addr for preenabled x2apic system Yinghai Lu
2010-12-09 20:56 ` [tip:x86/apic-cleanups] x86, x2apic: Don't map lapic addr for preenabled x2apic systems tip-bot for Yinghai Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4CFDF681.3030509@kernel.org \
--to=yinghai@kernel.org \
--cc=ebiederm@xmission.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=suresh.b.siddha@intel.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox