From: Anthony Liguori <anthony@codemonkey.ws>
To: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>,
Jamie Lokier <jamie@shareable.org>, Thomas Weber <swirl@gmx.li>,
gleb@redhat.com, virtualization@lists.linux-foundation.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] virtio-pci: add softlinks between virtio and pci
Date: Wed, 05 Jan 2011 13:28:34 -0600 [thread overview]
Message-ID: <4D24C662.9070804@codemonkey.ws> (raw)
In-Reply-To: <20110105191711.GA27489@redhat.com>
On 01/05/2011 01:17 PM, Michael S. Tsirkin wrote:
> We sometimes need to map between the virtio device and
> the given pci device. One such use is OS installer that
> gets the boot pci device from BIOS and needs to
> find the relevant block device. Since it can't,
> installation fails.
>
I have no objection to this patch but I'm a tad confused by the description.
I assume you mean the installer is querying the boot device via int13
get driver parameters such that it returns the pci address of the device?
Or is it querying geometry information and then trying to find the best
match block device?
If it's the former, I don't really understand the need for a backlink
since the PCI address gives you a link to the block device. OTOH, if
it's the later, it would make sense but then your description doesn't
really make much sense.
At any rate, a better commit message would be helpful in explaining the
need for this.
Regards,
Anthony Liguori
> Supply softlinks between these to make it possible.
>
> Signed-off-by: Michael S. Tsirkin<mst@redhat.com>
> ---
>
> Gleb, could you please ack that this patch below
> will be enough to fix the installer issue that
> you see?
>
> drivers/virtio/virtio_pci.c | 18 +++++++++++++++++-
> 1 files changed, 17 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
> index ef8d9d5..06eb2f8 100644
> --- a/drivers/virtio/virtio_pci.c
> +++ b/drivers/virtio/virtio_pci.c
> @@ -25,6 +25,7 @@
> #include<linux/virtio_pci.h>
> #include<linux/highmem.h>
> #include<linux/spinlock.h>
> +#include<linux/sysfs.h>
>
> MODULE_AUTHOR("Anthony Liguori<aliguori@us.ibm.com>");
> MODULE_DESCRIPTION("virtio-pci");
> @@ -667,8 +668,21 @@ static int __devinit virtio_pci_probe(struct pci_dev *pci_dev,
> if (err)
> goto out_set_drvdata;
>
> - return 0;
> + err = sysfs_create_link(&pci_dev->dev.kobj,&vp_dev->vdev.dev.kobj,
> + "virtio_device");
> + if (err)
> + goto out_register_device;
> +
> + err = sysfs_create_link(&vp_dev->vdev.dev.kobj,&pci_dev->dev.kobj,
> + "bus_device");
> + if (err)
> + goto out_create_link;
>
> + return 0;
> +out_create_link:
> + sysfs_remove_link(&pci_dev->dev.kobj, "virtio_device");
> +out_register_device:
> + unregister_virtio_device(&vp_dev->vdev);
> out_set_drvdata:
> pci_set_drvdata(pci_dev, NULL);
> pci_iounmap(pci_dev, vp_dev->ioaddr);
> @@ -685,6 +699,8 @@ static void __devexit virtio_pci_remove(struct pci_dev *pci_dev)
> {
> struct virtio_pci_device *vp_dev = pci_get_drvdata(pci_dev);
>
> + sysfs_remove_link(&vp_dev->vdev.dev.kobj, "bus_device");
> + sysfs_remove_link(&pci_dev->dev.kobj, "virtio_device");
> unregister_virtio_device(&vp_dev->vdev);
> }
>
>
next prev parent reply other threads:[~2011-01-05 19:28 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-05 19:17 [PATCH] virtio-pci: add softlinks between virtio and pci Michael S. Tsirkin
2011-01-05 19:28 ` Anthony Liguori [this message]
2011-01-05 19:38 ` Michael S. Tsirkin
2011-01-05 20:06 ` Anthony Liguori
2011-01-05 20:05 ` Michael S. Tsirkin
2011-01-05 20:08 ` Anthony Liguori
2011-01-05 21:15 ` Michael S. Tsirkin
2011-01-06 8:51 ` Gleb Natapov
2011-01-07 8:54 ` Milton Miller
2011-01-07 8:55 ` [PATCH] virtio: remove virtio-pci root device Milton Miller
2011-01-07 10:24 ` Michael S. Tsirkin
2011-01-09 15:18 ` Michael S. Tsirkin
2011-01-10 11:18 ` Gleb Natapov
2011-01-10 11:22 ` Michael S. Tsirkin
2011-01-10 11:27 ` Gleb Natapov
2011-01-10 11:42 ` Gleb Natapov
2011-01-10 12:08 ` Michael S. Tsirkin
2011-01-10 12:50 ` Gleb Natapov
2011-01-10 13:31 ` Michael S. Tsirkin
2011-01-10 13:40 ` Gleb Natapov
2011-01-10 14:19 ` Michael S. Tsirkin
2011-01-10 17:10 ` Gleb Natapov
2011-01-10 17:19 ` Michael S. Tsirkin
2011-01-17 0:33 ` Rusty Russell
2011-01-10 17:44 ` Michael S. Tsirkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D24C662.9070804@codemonkey.ws \
--to=anthony@codemonkey.ws \
--cc=gleb@redhat.com \
--cc=jamie@shareable.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mst@redhat.com \
--cc=rusty@rustcorp.com.au \
--cc=swirl@gmx.li \
--cc=virtualization@lists.linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox