[PATCH 2/4] dmaengine i.MX dma: check sg entries for valid addresses and lengths

Sascha Hauer
2011-01-31T12:00:59Z

drivers/dma/imx-dma.c | 15 +++++++++++++++
1 files changed, 15 insertions(+), 0 deletions(-)

diff --git a/drivers/dma/imx-dma.c b/drivers/dma/imx-dma.c
index a46e1d9..a1eac99 100644
--- a/drivers/dma/imx-dma.c
+++ b/drivers/dma/imx-dma.c
@@ -243,6 +243,21 @@ static struct dma_async_tx_descriptor *imxdma_prep_slave_sg(
else
dmamode = DMA_MODE_WRITE;

+ switch (imxdmac->word_size) {
+ case DMA_SLAVE_BUSWIDTH_4_BYTES:
+ if (sgl->length & 3 || sgl->dma_address & 3)
+ return NULL;
+ break;
+ case DMA_SLAVE_BUSWIDTH_2_BYTES:
+ if (sgl->length & 1 || sgl->dma_address & 1)
+ return NULL;
+ break;
+ case DMA_SLAVE_BUSWIDTH_1_BYTE:
+ break;
+ default:
+ return NULL;
+ }
+
ret = imx_dma_setup_sg(imxdmac->imxdma_channel, sgl, sg_len,
dma_length, imxdmac->per_address, dmamode);
if (ret)
--
1.7.2.3