Re: [PATCH 2/3] power: ds2782_battery: add MODULE_DEVICE_TABLE

Ryan Mallon
2011-03-01T20:15:05Z

On 03/01/2011 10:23 PM, Axel Lin wrote:
> The device table is required to load modules based on modaliases.
> After adding the MODULE_DEVICE_TABLE, below entries will be added to
> modules.alias:
> alias i2c:ds2786 ds2782_battery
> alias i2c:ds2782 ds2782_battery
>
> Signed-off-by: Axel Lin <axel.lin@gmail.com>

Thanks Axel,

Acked-by: Ryan Mallon <ryan@bluewatersys.com>

> ---
> drivers/power/ds2782_battery.c | 1 +
> 1 files changed, 1 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/power/ds2782_battery.c b/drivers/power/ds2782_battery.c
> index 6957e8a..4d2dc4f 100644
> --- a/drivers/power/ds2782_battery.c
> +++ b/drivers/power/ds2782_battery.c
> @@ -393,6 +393,7 @@ static const struct i2c_device_id ds278x_id[] = {
> {"ds2786", DS2786},
> {},
> };
> +MODULE_DEVICE_TABLE(i2c, ds278x_id);
>
> static struct i2c_driver ds278x_battery_driver = {
> .driver = {

--
Bluewater Systems Ltd - ARM Technology Solution Centre

Ryan Mallon 5 Amuri Park, 404 Barbadoes St
ryan@bluewatersys.com PO Box 13 889, Christchurch 8013
http://www.bluewatersys.com New Zealand
Phone: +64 3 3779127 Freecall: Australia 1800 148 751
Fax: +64 3 3779135 USA 1800 261 2934