[PATCH] stable: sheevaplug-setup.c fix LED color name and add support for second LED This is a patch to the sheevaplug-setup.c file that fixes the color name of the existing health LED. That LED gpio 49 is green when off and blue when on. The patch also adds support for the second LED that is green when off and red when on. Signed-off-by: Robin Becker <robin@reportlab.com>

[PATCH] stable: sheevaplug-setup.c fix LED color name and add support for second LED This is a patch to the sheevaplug-setup.c file that fixes the color name of the existing health LED. That LED gpio 49 is green when off and blue when on. The patch also adds support for the second LED that is green when off and red when on. Signed-off-by: Robin Becker <robin@reportlab.com>

[Robin Becker]

From: replabrobin <robin@reportlab.com>

---
 arch/arm/mach-kirkwood/sheevaplug-setup.c |   12 ++++++++++--
 1 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c
index d2eec35..40441da 100644
--- a/arch/arm/mach-kirkwood/sheevaplug-setup.c
+++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
@@ -58,7 +58,13 @@ static struct mvsdio_platform_data sheeva_esata_mvsdio_data = {
 
 static struct gpio_led sheevaplug_led_pins[] = {
 	{
-		.name			= "plug:green:health",
+		.name			= "plug:red:misc",
+		.default_trigger	= "none",
+		.gpio			= 46,
+		.active_low		= 1,
+	},
+	{
+		.name			= "plug:blue:health",
 		.default_trigger	= "default-on",
 		.gpio			= 49,
 		.active_low		= 1,
@@ -80,13 +86,15 @@ static struct platform_device sheevaplug_leds = {
 
 static unsigned int sheevaplug_mpp_config[] __initdata = {
 	MPP29_GPIO,	/* USB Power Enable */
-	MPP49_GPIO,	/* LED */
+	MPP46_GPIO,	/* RED LED */
+	MPP49_GPIO,	/* BLUE LED */
 	0
 };
 
 static unsigned int sheeva_esata_mpp_config[] __initdata = {
 	MPP29_GPIO,	/* USB Power Enable */
 	MPP44_GPIO,	/* SD Write Protect */
+	MPP46_GPIO,	/* RED LED */
 	MPP47_GPIO,	/* SD Card Detect */
 	MPP49_GPIO,	/* LED Green */
 	0
-- 
1.7.4.1

Re: [PATCH] stable: sheevaplug-setup.c fix LED color name and add support for second LED This is a patch to the sheevaplug-setup.c file that fixes the color name of the existing health LED. That LED gpio 49 is green when off and blue when on. The patch also adds support for the second LED that is green when off and red when on. Signed-off-by: Robin Becker <robin@reportlab.com>

[Sergei Shtylyov]

Hello.

On 09-03-2011 16:27, Robin Becker wrote:

> From: replabrobin <robin@reportlab.com>

    Real name is required in signoff.

WBR, Sergei