Firmware works I think, why my networking fails?

Firmware works I think, why my networking fails?

[Piotr Hosowicz]

Hello,

The 2.6.39-git3 kernel works as usual, mii-tool shows that there is 
link. Any newer kernel fails this test. What can I do? What extra 
information would you need?

Regards,

Piotr Hosowicz

-- 
"Wiedza to władza. Ale niewiedza, niestety, nie oznacza jeszcze
braku władzy." Niels Bohr
NP: Peter Green Splinter Group - Big Change Is Gonna Come
NB: 2.6.38-git3

Re: Firmware works I think, why my networking fails?

[Piotr Hosowicz]

On 18.03.2011 12:34, Piotr Hosowicz wrote:
> Hello,
>
> The 2.6.39-git3 kernel works as usual, mii-tool shows that there is
> link. Any newer kernel fails this test. What can I do? What extra
> information would you need?

Here is some more ethtool info, when cannot connect through ADSL via eth0:

aapi205:~# cat eth0.et.BAD.txt
Settings for eth0:
         Supported ports: [ TP MII ]
         Supported link modes:   10baseT/Half 10baseT/Full
                                 100baseT/Half 100baseT/Full
                                 1000baseT/Half 1000baseT/Full
         Supports auto-negotiation: Yes
         Advertised link modes:  1000baseT/Half 1000baseT/Full
         Advertised pause frame use: No
         Advertised auto-negotiation: Yes
         Speed: 10Mb/s
         Duplex: Half
         Port: MII
         PHYAD: 0
         Transceiver: internal
         Auto-negotiation: on
         Supports Wake-on: pumbg
         Wake-on: g
         Current message level: 0x00000033 (51)
         Link detected: no

Regards,

Piotr Hosowicz

-- 
TV: "Gruchała jest taka, że cieszy się z każdego pchnięcia."
NP: Banda Do Sol - Tempo
NB: 2.6.38-git3