* [PATCH 2/3] viafb: split clock and PLL code to an extra file
2011-03-24 16:12 viafb clock patches - second round Florian Tobias Schandinat
2011-03-24 16:12 ` [PATCH 1/3] viafb: add primary/secondary clock on/off switches Florian Tobias Schandinat
@ 2011-03-24 16:12 ` Florian Tobias Schandinat
2011-03-24 16:13 ` [PATCH 3/3] viafb: add VIA slapping capability Florian Tobias Schandinat
2 siblings, 0 replies; 7+ messages in thread
From: Florian Tobias Schandinat @ 2011-03-24 16:12 UTC (permalink / raw)
To: linux-fbdev; +Cc: linux-kernel, Florian Tobias Schandinat
This patch is a huge move operation with some rename and introduces
an interface to still use the functions. This should be a step in
the right direction to reuse the code whenever possible but cleanly
separate code that differs on different platform and keeping the
complexity as low as possible.
pll_config was renamed to via_pll_config to keep the naming scheme.
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
---
drivers/video/via/Makefile | 2 +-
drivers/video/via/hw.c | 288 ++---------------------------------------
drivers/video/via/hw.h | 6 -
drivers/video/via/via_clock.c | 280 +++++++++++++++++++++++++++++++++++++++
drivers/video/via/via_clock.h | 73 +++++++++++
5 files changed, 368 insertions(+), 281 deletions(-)
create mode 100644 drivers/video/via/via_clock.c
create mode 100644 drivers/video/via/via_clock.h
diff --git a/drivers/video/via/Makefile b/drivers/video/via/Makefile
index 96f01ee..5108136 100644
--- a/drivers/video/via/Makefile
+++ b/drivers/video/via/Makefile
@@ -6,4 +6,4 @@ obj-$(CONFIG_FB_VIA) += viafb.o
viafb-y :=viafbdev.o hw.o via_i2c.o dvi.o lcd.o ioctl.o accel.o \
via_utility.o vt1636.o global.o tblDPASetting.o viamode.o \
- via-core.o via-gpio.o via_modesetting.o
+ via-core.o via-gpio.o via_modesetting.o via_clock.o
diff --git a/drivers/video/via/hw.c b/drivers/video/via/hw.c
index 712348d..f1eff0b 100644
--- a/drivers/video/via/hw.c
+++ b/drivers/video/via/hw.c
@@ -21,6 +21,7 @@
#include <linux/via-core.h>
#include "global.h"
+#include "via_clock.h"
static struct pll_limit cle266_pll_limits[] = {
{19, 19, 4, 0},
@@ -484,6 +485,9 @@ static struct via_device_mapping device_mapping[] = {
{VIA_LVDS2, "LVDS2"}
};
+/* structure with function pointers to support clock control */
+static struct via_clock clock;
+
static void load_fix_bit_crtc_reg(void);
static void __devinit init_gfx_chip_info(int chip_type);
static void __devinit init_tmds_chip_info(void);
@@ -1409,230 +1413,10 @@ void viafb_load_FIFO_reg(int set_iga, int hor_active, int ver_active)
}
-static void set_primary_clock_state(u8 state)
-{
- u8 value;
-
- switch (state) {
- case VIA_STATE_ON:
- value = 0x20;
- break;
- case VIA_STATE_OFF:
- value = 0x00;
- break;
- default:
- return;
- }
-
- via_write_reg_mask(VIASR, 0x1B, value, 0x30);
-}
-
-static void set_secondary_clock_state(u8 state)
-{
- u8 value;
-
- switch (state) {
- case VIA_STATE_ON:
- value = 0x80;
- break;
- case VIA_STATE_OFF:
- value = 0x00;
- break;
- default:
- return;
- }
-
- via_write_reg_mask(VIASR, 0x1B, value, 0xC0);
-}
-
-static void set_primary_pll_state(u8 state)
-{
- u8 value;
-
- switch (state) {
- case VIA_STATE_ON:
- value = 0x20;
- break;
- case VIA_STATE_OFF:
- value = 0x00;
- break;
- default:
- return;
- }
-
- via_write_reg_mask(VIASR, 0x2D, value, 0x30);
-}
-
-static void set_secondary_pll_state(u8 state)
-{
- u8 value;
-
- switch (state) {
- case VIA_STATE_ON:
- value = 0x08;
- break;
- case VIA_STATE_OFF:
- value = 0x00;
- break;
- default:
- return;
- }
-
- via_write_reg_mask(VIASR, 0x2D, value, 0x0C);
-}
-
-static u32 cle266_encode_pll(struct pll_config pll)
-{
- return (pll.multiplier << 8)
- | (pll.rshift << 6)
- | pll.divisor;
-}
-
-static u32 k800_encode_pll(struct pll_config pll)
-{
- return ((pll.divisor - 2) << 16)
- | (pll.rshift << 10)
- | (pll.multiplier - 2);
-}
-
-static u32 vx855_encode_pll(struct pll_config pll)
-{
- return (pll.divisor << 16)
- | (pll.rshift << 10)
- | pll.multiplier;
-}
-
-static inline void cle266_set_primary_pll_encoded(u32 data)
-{
- via_write_reg_mask(VIASR, 0x40, 0x02, 0x02); /* enable reset */
- via_write_reg(VIASR, 0x46, data & 0xFF);
- via_write_reg(VIASR, 0x47, (data >> 8) & 0xFF);
- via_write_reg_mask(VIASR, 0x40, 0x00, 0x02); /* disable reset */
-}
-
-static inline void k800_set_primary_pll_encoded(u32 data)
-{
- via_write_reg_mask(VIASR, 0x40, 0x02, 0x02); /* enable reset */
- via_write_reg(VIASR, 0x44, data & 0xFF);
- via_write_reg(VIASR, 0x45, (data >> 8) & 0xFF);
- via_write_reg(VIASR, 0x46, (data >> 16) & 0xFF);
- via_write_reg_mask(VIASR, 0x40, 0x00, 0x02); /* disable reset */
-}
-
-static inline void cle266_set_secondary_pll_encoded(u32 data)
-{
- via_write_reg_mask(VIASR, 0x40, 0x04, 0x04); /* enable reset */
- via_write_reg(VIASR, 0x44, data & 0xFF);
- via_write_reg(VIASR, 0x45, (data >> 8) & 0xFF);
- via_write_reg_mask(VIASR, 0x40, 0x00, 0x04); /* disable reset */
-}
-
-static inline void k800_set_secondary_pll_encoded(u32 data)
-{
- via_write_reg_mask(VIASR, 0x40, 0x04, 0x04); /* enable reset */
- via_write_reg(VIASR, 0x4A, data & 0xFF);
- via_write_reg(VIASR, 0x4B, (data >> 8) & 0xFF);
- via_write_reg(VIASR, 0x4C, (data >> 16) & 0xFF);
- via_write_reg_mask(VIASR, 0x40, 0x00, 0x04); /* disable reset */
-}
-
-static void cle266_set_primary_pll(struct pll_config config)
-{
- cle266_set_primary_pll_encoded(cle266_encode_pll(config));
-}
-
-static void k800_set_primary_pll(struct pll_config config)
-{
- k800_set_primary_pll_encoded(k800_encode_pll(config));
-}
-
-static void vx855_set_primary_pll(struct pll_config config)
-{
- k800_set_primary_pll_encoded(vx855_encode_pll(config));
-}
-
-static void cle266_set_secondary_pll(struct pll_config config)
-{
- cle266_set_secondary_pll_encoded(cle266_encode_pll(config));
-}
-
-static void k800_set_secondary_pll(struct pll_config config)
-{
- k800_set_secondary_pll_encoded(k800_encode_pll(config));
-}
-
-static void vx855_set_secondary_pll(struct pll_config config)
-{
- k800_set_secondary_pll_encoded(vx855_encode_pll(config));
-}
-
-enum via_clksrc {
- VIA_CLKSRC_X1 = 0,
- VIA_CLKSRC_TVX1,
- VIA_CLKSRC_TVPLL,
- VIA_CLKSRC_DVP1TVCLKR,
- VIA_CLKSRC_CAP0,
- VIA_CLKSRC_CAP1,
-};
-
-static inline u8 set_clock_source_common(enum via_clksrc source, bool use_pll)
-{
- u8 data = 0;
-
- switch (source) {
- case VIA_CLKSRC_X1:
- data = 0x00;
- break;
- case VIA_CLKSRC_TVX1:
- data = 0x02;
- break;
- case VIA_CLKSRC_TVPLL:
- data = 0x04; /* 0x06 should be the same */
- break;
- case VIA_CLKSRC_DVP1TVCLKR:
- data = 0x0A;
- break;
- case VIA_CLKSRC_CAP0:
- data = 0xC;
- break;
- case VIA_CLKSRC_CAP1:
- data = 0x0E;
- break;
- }
-
- if (!use_pll)
- data |= 1;
-
- return data;
-}
-
-static void set_primary_clock_source(enum via_clksrc source, bool use_pll)
-{
- u8 data = set_clock_source_common(source, use_pll) << 4;
- via_write_reg_mask(VIACR, 0x6C, data, 0xF0);
-}
-
-static void set_secondary_clock_source(enum via_clksrc source, bool use_pll)
-{
- u8 data = set_clock_source_common(source, use_pll);
- via_write_reg_mask(VIACR, 0x6C, data, 0x0F);
-}
-
-static inline u32 get_pll_internal_frequency(u32 ref_freq,
- struct pll_config pll)
-{
- return ref_freq / pll.divisor * pll.multiplier;
-}
-
-static inline u32 get_pll_output_frequency(u32 ref_freq, struct pll_config pll)
-{
- return get_pll_internal_frequency(ref_freq, pll)>>pll.rshift;
-}
-
-static struct pll_config get_pll_config(struct pll_limit *limits, int size,
+static struct via_pll_config get_pll_config(struct pll_limit *limits, int size,
int clk)
{
- struct pll_config cur, up, down, best = {0, 1, 0};
+ struct via_pll_config cur, up, down, best = {0, 1, 0};
const u32 f0 = 14318180; /* X1 frequency */
int i, f;
@@ -1662,9 +1446,9 @@ static struct pll_config get_pll_config(struct pll_limit *limits, int size,
return best;
}
-static struct pll_config get_best_pll_config(int clk)
+static struct via_pll_config get_best_pll_config(int clk)
{
- struct pll_config config;
+ struct via_pll_config config;
switch (viaparinfo->chip_info->gfx_chip_name) {
case UNICHROME_CLE266:
@@ -1700,57 +1484,12 @@ static struct pll_config get_best_pll_config(int clk)
/* Set VCLK*/
void viafb_set_vclock(u32 clk, int set_iga)
{
- struct pll_config config = get_best_pll_config(clk);
+ struct via_pll_config config = get_best_pll_config(clk);
- if (set_iga == IGA1) {
- /* Change D,N FOR VCLK */
- switch (viaparinfo->chip_info->gfx_chip_name) {
- case UNICHROME_CLE266:
- case UNICHROME_K400:
- cle266_set_primary_pll(config);
- break;
- case UNICHROME_K800:
- case UNICHROME_PM800:
- case UNICHROME_CN700:
- case UNICHROME_CX700:
- case UNICHROME_CN750:
- case UNICHROME_K8M890:
- case UNICHROME_P4M890:
- case UNICHROME_P4M900:
- case UNICHROME_VX800:
- k800_set_primary_pll(config);
- break;
- case UNICHROME_VX855:
- case UNICHROME_VX900:
- vx855_set_primary_pll(config);
- break;
- }
- }
-
- if (set_iga == IGA2) {
- /* Change D,N FOR LCK */
- switch (viaparinfo->chip_info->gfx_chip_name) {
- case UNICHROME_CLE266:
- case UNICHROME_K400:
- cle266_set_secondary_pll(config);
- break;
- case UNICHROME_K800:
- case UNICHROME_PM800:
- case UNICHROME_CN700:
- case UNICHROME_CX700:
- case UNICHROME_CN750:
- case UNICHROME_K8M890:
- case UNICHROME_P4M890:
- case UNICHROME_P4M900:
- case UNICHROME_VX800:
- k800_set_secondary_pll(config);
- break;
- case UNICHROME_VX855:
- case UNICHROME_VX900:
- vx855_set_secondary_pll(config);
- break;
- }
- }
+ if (set_iga == IGA1)
+ clock.set_primary_pll(config);
+ if (set_iga == IGA2)
+ clock.set_secondary_pll(config);
/* Fire! */
via_write_misc_reg_mask(0x0C, 0x0C); /* select external clock */
@@ -2059,6 +1798,7 @@ void viafb_fill_crtc_timing(struct crt_mode_table *crt_table,
void __devinit viafb_init_chip_info(int chip_type)
{
+ via_clock_init(&clock, chip_type);
init_gfx_chip_info(chip_type);
init_tmds_chip_info();
init_lvds_chip_info();
diff --git a/drivers/video/via/hw.h b/drivers/video/via/hw.h
index 2cdce9b..7e9f51a 100644
--- a/drivers/video/via/hw.h
+++ b/drivers/video/via/hw.h
@@ -732,12 +732,6 @@ struct _lcd_scaling_factor {
struct _lcd_ver_scaling_factor lcd_ver_scaling_factor;
};
-struct pll_config {
- u16 multiplier;
- u8 divisor;
- u8 rshift;
-};
-
struct pll_limit {
u16 multiplier_min;
u16 multiplier_max;
diff --git a/drivers/video/via/via_clock.c b/drivers/video/via/via_clock.c
new file mode 100644
index 0000000..29afe4c
--- /dev/null
+++ b/drivers/video/via/via_clock.c
@@ -0,0 +1,280 @@
+/*
+ * Copyright 1998-2008 VIA Technologies, Inc. All Rights Reserved.
+ * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved.
+ * Copyright 2011 Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public
+ * License as published by the Free Software Foundation;
+ * either version 2, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even
+ * the implied warranty of MERCHANTABILITY or FITNESS FOR
+ * A PARTICULAR PURPOSE.See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+/*
+ * clock and PLL management functions
+ */
+
+#include <linux/kernel.h>
+#include <linux/via-core.h>
+#include "via_clock.h"
+#include "global.h"
+#include "debug.h"
+
+static inline u32 cle266_encode_pll(struct via_pll_config pll)
+{
+ return (pll.multiplier << 8)
+ | (pll.rshift << 6)
+ | pll.divisor;
+}
+
+static inline u32 k800_encode_pll(struct via_pll_config pll)
+{
+ return ((pll.divisor - 2) << 16)
+ | (pll.rshift << 10)
+ | (pll.multiplier - 2);
+}
+
+static inline u32 vx855_encode_pll(struct via_pll_config pll)
+{
+ return (pll.divisor << 16)
+ | (pll.rshift << 10)
+ | pll.multiplier;
+}
+
+static inline void cle266_set_primary_pll_encoded(u32 data)
+{
+ via_write_reg_mask(VIASR, 0x40, 0x02, 0x02); /* enable reset */
+ via_write_reg(VIASR, 0x46, data & 0xFF);
+ via_write_reg(VIASR, 0x47, (data >> 8) & 0xFF);
+ via_write_reg_mask(VIASR, 0x40, 0x00, 0x02); /* disable reset */
+}
+
+static inline void k800_set_primary_pll_encoded(u32 data)
+{
+ via_write_reg_mask(VIASR, 0x40, 0x02, 0x02); /* enable reset */
+ via_write_reg(VIASR, 0x44, data & 0xFF);
+ via_write_reg(VIASR, 0x45, (data >> 8) & 0xFF);
+ via_write_reg(VIASR, 0x46, (data >> 16) & 0xFF);
+ via_write_reg_mask(VIASR, 0x40, 0x00, 0x02); /* disable reset */
+}
+
+static inline void cle266_set_secondary_pll_encoded(u32 data)
+{
+ via_write_reg_mask(VIASR, 0x40, 0x04, 0x04); /* enable reset */
+ via_write_reg(VIASR, 0x44, data & 0xFF);
+ via_write_reg(VIASR, 0x45, (data >> 8) & 0xFF);
+ via_write_reg_mask(VIASR, 0x40, 0x00, 0x04); /* disable reset */
+}
+
+static inline void k800_set_secondary_pll_encoded(u32 data)
+{
+ via_write_reg_mask(VIASR, 0x40, 0x04, 0x04); /* enable reset */
+ via_write_reg(VIASR, 0x4A, data & 0xFF);
+ via_write_reg(VIASR, 0x4B, (data >> 8) & 0xFF);
+ via_write_reg(VIASR, 0x4C, (data >> 16) & 0xFF);
+ via_write_reg_mask(VIASR, 0x40, 0x00, 0x04); /* disable reset */
+}
+
+static void cle266_set_primary_pll(struct via_pll_config config)
+{
+ cle266_set_primary_pll_encoded(cle266_encode_pll(config));
+}
+
+static void k800_set_primary_pll(struct via_pll_config config)
+{
+ k800_set_primary_pll_encoded(k800_encode_pll(config));
+}
+
+static void vx855_set_primary_pll(struct via_pll_config config)
+{
+ k800_set_primary_pll_encoded(vx855_encode_pll(config));
+}
+
+static void cle266_set_secondary_pll(struct via_pll_config config)
+{
+ cle266_set_secondary_pll_encoded(cle266_encode_pll(config));
+}
+
+static void k800_set_secondary_pll(struct via_pll_config config)
+{
+ k800_set_secondary_pll_encoded(k800_encode_pll(config));
+}
+
+static void vx855_set_secondary_pll(struct via_pll_config config)
+{
+ k800_set_secondary_pll_encoded(vx855_encode_pll(config));
+}
+
+static void set_primary_pll_state(u8 state)
+{
+ u8 value;
+
+ switch (state) {
+ case VIA_STATE_ON:
+ value = 0x20;
+ break;
+ case VIA_STATE_OFF:
+ value = 0x00;
+ break;
+ default:
+ return;
+ }
+
+ via_write_reg_mask(VIASR, 0x2D, value, 0x30);
+}
+
+static void set_secondary_pll_state(u8 state)
+{
+ u8 value;
+
+ switch (state) {
+ case VIA_STATE_ON:
+ value = 0x08;
+ break;
+ case VIA_STATE_OFF:
+ value = 0x00;
+ break;
+ default:
+ return;
+ }
+
+ via_write_reg_mask(VIASR, 0x2D, value, 0x0C);
+}
+
+static void set_primary_clock_state(u8 state)
+{
+ u8 value;
+
+ switch (state) {
+ case VIA_STATE_ON:
+ value = 0x20;
+ break;
+ case VIA_STATE_OFF:
+ value = 0x00;
+ break;
+ default:
+ return;
+ }
+
+ via_write_reg_mask(VIASR, 0x1B, value, 0x30);
+}
+
+static void set_secondary_clock_state(u8 state)
+{
+ u8 value;
+
+ switch (state) {
+ case VIA_STATE_ON:
+ value = 0x80;
+ break;
+ case VIA_STATE_OFF:
+ value = 0x00;
+ break;
+ default:
+ return;
+ }
+
+ via_write_reg_mask(VIASR, 0x1B, value, 0xC0);
+}
+
+static inline u8 set_clock_source_common(enum via_clksrc source, bool use_pll)
+{
+ u8 data = 0;
+
+ switch (source) {
+ case VIA_CLKSRC_X1:
+ data = 0x00;
+ break;
+ case VIA_CLKSRC_TVX1:
+ data = 0x02;
+ break;
+ case VIA_CLKSRC_TVPLL:
+ data = 0x04; /* 0x06 should be the same */
+ break;
+ case VIA_CLKSRC_DVP1TVCLKR:
+ data = 0x0A;
+ break;
+ case VIA_CLKSRC_CAP0:
+ data = 0xC;
+ break;
+ case VIA_CLKSRC_CAP1:
+ data = 0x0E;
+ break;
+ }
+
+ if (!use_pll)
+ data |= 1;
+
+ return data;
+}
+
+static void set_primary_clock_source(enum via_clksrc source, bool use_pll)
+{
+ u8 data = set_clock_source_common(source, use_pll) << 4;
+ via_write_reg_mask(VIACR, 0x6C, data, 0xF0);
+}
+
+static void set_secondary_clock_source(enum via_clksrc source, bool use_pll)
+{
+ u8 data = set_clock_source_common(source, use_pll);
+ via_write_reg_mask(VIACR, 0x6C, data, 0x0F);
+}
+
+void via_clock_init(struct via_clock *clock, int gfx_chip)
+{
+ switch (gfx_chip) {
+ case UNICHROME_CLE266:
+ case UNICHROME_K400:
+ clock->set_primary_clock_state = NULL;
+ clock->set_primary_clock_source = NULL;
+ clock->set_primary_pll_state = NULL;
+ clock->set_primary_pll = cle266_set_primary_pll;
+
+ clock->set_secondary_clock_state = NULL;
+ clock->set_secondary_clock_source = NULL;
+ clock->set_secondary_pll_state = NULL;
+ clock->set_secondary_pll = cle266_set_secondary_pll;
+ break;
+ case UNICHROME_K800:
+ case UNICHROME_PM800:
+ case UNICHROME_CN700:
+ case UNICHROME_CX700:
+ case UNICHROME_CN750:
+ case UNICHROME_K8M890:
+ case UNICHROME_P4M890:
+ case UNICHROME_P4M900:
+ case UNICHROME_VX800:
+ clock->set_primary_clock_state = set_primary_clock_state;
+ clock->set_primary_clock_source = set_primary_clock_source;
+ clock->set_primary_pll_state = set_primary_pll_state;
+ clock->set_primary_pll = k800_set_primary_pll;
+
+ clock->set_secondary_clock_state = set_secondary_clock_state;
+ clock->set_secondary_clock_source = set_secondary_clock_source;
+ clock->set_secondary_pll_state = set_secondary_pll_state;
+ clock->set_secondary_pll = k800_set_secondary_pll;
+ break;
+ case UNICHROME_VX855:
+ case UNICHROME_VX900:
+ clock->set_primary_clock_state = set_primary_clock_state;
+ clock->set_primary_clock_source = set_primary_clock_source;
+ clock->set_primary_pll_state = set_primary_pll_state;
+ clock->set_primary_pll = vx855_set_primary_pll;
+
+ clock->set_secondary_clock_state = set_secondary_clock_state;
+ clock->set_secondary_clock_source = set_secondary_clock_source;
+ clock->set_secondary_pll_state = set_secondary_pll_state;
+ clock->set_secondary_pll = vx855_set_secondary_pll;
+ break;
+
+ }
+}
diff --git a/drivers/video/via/via_clock.h b/drivers/video/via/via_clock.h
new file mode 100644
index 0000000..f213a7a
--- /dev/null
+++ b/drivers/video/via/via_clock.h
@@ -0,0 +1,73 @@
+/*
+ * Copyright 1998-2008 VIA Technologies, Inc. All Rights Reserved.
+ * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved.
+ * Copyright 2011 Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public
+ * License as published by the Free Software Foundation;
+ * either version 2, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even
+ * the implied warranty of MERCHANTABILITY or FITNESS FOR
+ * A PARTICULAR PURPOSE.See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+/*
+ * clock and PLL management functions
+ */
+
+#ifndef __VIA_CLOCK_H__
+#define __VIA_CLOCK_H__
+
+#include <linux/types.h>
+
+enum via_clksrc {
+ VIA_CLKSRC_X1 = 0,
+ VIA_CLKSRC_TVX1,
+ VIA_CLKSRC_TVPLL,
+ VIA_CLKSRC_DVP1TVCLKR,
+ VIA_CLKSRC_CAP0,
+ VIA_CLKSRC_CAP1,
+};
+
+struct via_pll_config {
+ u16 multiplier;
+ u8 divisor;
+ u8 rshift;
+};
+
+struct via_clock {
+ void (*set_primary_clock_state)(u8 state);
+ void (*set_primary_clock_source)(enum via_clksrc src, bool use_pll);
+ void (*set_primary_pll_state)(u8 state);
+ void (*set_primary_pll)(struct via_pll_config config);
+
+ void (*set_secondary_clock_state)(u8 state);
+ void (*set_secondary_clock_source)(enum via_clksrc src, bool use_pll);
+ void (*set_secondary_pll_state)(u8 state);
+ void (*set_secondary_pll)(struct via_pll_config config);
+};
+
+
+static inline u32 get_pll_internal_frequency(u32 ref_freq,
+ struct via_pll_config pll)
+{
+ return ref_freq / pll.divisor * pll.multiplier;
+}
+
+static inline u32 get_pll_output_frequency(u32 ref_freq,
+ struct via_pll_config pll)
+{
+ return get_pll_internal_frequency(ref_freq, pll) >> pll.rshift;
+}
+
+void via_clock_init(struct via_clock *clock, int gfx_chip);
+
+#endif /* __VIA_CLOCK_H__ */
--
1.6.3.2
^ permalink raw reply related [flat|nested] 7+ messages in thread