Re: [PATCH v4 1/2] ata: pata_at91.c bugfix for initial_timing initialisation

[Sergei Shtylyov <sshtylyov@mvista.com>]

Hello.

Igor Plyatov wrote:

> The "struct ata_timing" must contain 10 members, but ".dmack_hold" member was
> forgotten for "initial_timing" initialisation. This patch fixes such a problem.

> Signed-off-by: Igor Plyatov <plyatov@gmail.com>
> ---
>  drivers/ata/pata_at91.c |   14 ++++++++++++--
>  1 files changed, 12 insertions(+), 2 deletions(-)

> diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c
> index 0da0dcc..0267d54 100644
> --- a/drivers/ata/pata_at91.c
> +++ b/drivers/ata/pata_at91.c
> @@ -49,8 +49,18 @@ struct at91_ide_info {
>  	void __iomem *alt_addr;
>  };
>  
> -static const struct ata_timing initial_timing =
> -	{XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0};
> +static const struct ata_timing initial_timing = {
> +	.mode		= XFER_PIO_0,
> +	.setup		= 70,
> +	.act8b		= 290,
> +	.rec8b		= 240,
> +	.cyc8b		= 600,
> +	.active		= 165,
> +	.recover	= 150,
> +	.dmack_hold	= 0,
> +	.cycle		= 600,
> +	.udma		= 0
> +};

   There's no need to explicitly initialize to 0.

MBR, Sergei