Re: [PATCH] microblaze: Fix level/edge irq sensibility

[Michal Simek <monstr@monstr.eu>]

Michal Simek wrote:
> Patches:
> "microblaze: Convert to new irq function names"
> sha (4adc192ec7d977c74c750320f289af9d61c1caca)
> and
> "microblaze: Use generic show_interrupts()"
> sha(9d61c18b25726306c9231428c17db42e3ff29ba7)
> 
> should also setup edge/level in irq_set_chip_and_handler_name
> name parameter.
> 
> Error log:
> ~ # cat /proc/interrupts
>            CPU0
>   2:          2  Xilinx INTC-Xilinx INTC  eth0
>   3:          2  Xilinx INTC-Xilinx INTC  eth0
>   4:        241  Xilinx INTC-Xilinx INTC  timer
>   6:        108  Xilinx INTC-Xilinx INTC  serial
> 
> Fixed:
> ~ # cat /proc/interrupts
>            CPU0
>   2:          2  Xilinx INTC-edge      eth0
>   3:          2  Xilinx INTC-edge      eth0
>   4:        241  Xilinx INTC-level     timer
>   6:        108  Xilinx INTC-edge      serial
> 
> Signed-off-by: Michal Simek <monstr@monstr.eu>
> ---
>  arch/microblaze/kernel/intc.c |    4 ++--
>  1 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/microblaze/kernel/intc.c b/arch/microblaze/kernel/intc.c
> index 5ba7e16..71efa51 100644
> --- a/arch/microblaze/kernel/intc.c
> +++ b/arch/microblaze/kernel/intc.c
> @@ -158,11 +158,11 @@ void __init init_IRQ(void)
>  	for (i = 0; i < nr_irq; ++i) {
>  		if (intr_type & (0x00000001 << i)) {
>  			irq_set_chip_and_handler_name(i, &intc_dev,
> -				handle_edge_irq, intc_dev.name);
> +				handle_edge_irq, "level");
>  			irq_clear_status_flags(i, IRQ_LEVEL);
>  		} else {
>  			irq_set_chip_and_handler_name(i, &intc_dev,
> -				handle_level_irq, intc_dev.name);
> +				handle_level_irq, "edge");

oou - vice-versa - this is level and above is edge.
Will send v2

M



-- 
Michal Simek, Ing. (M.Eng)
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel 2.6 Microblaze Linux - http://www.monstr.eu/fdt/
Microblaze U-BOOT custodian