From: "Jiří Pinkava" <Jiri.Pinkava@vscht.cz>
To: Randy Dunlap <randy.dunlap@oracle.com>
Cc: "ben-linux@fluff.org" <ben-linux@fluff.org>,
"kgene.kim@samsung.com" <kgene.kim@samsung.com>,
"dwmw2@infradead.org" <dwmw2@infradead.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"linux-mtd@lists.infradead.org" <linux-mtd@lists.infradead.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] nand: Fix S3C NAND clock stop
Date: Mon, 11 Apr 2011 05:15:17 +0200 [thread overview]
Message-ID: <4DA27245.6@vscht.cz> (raw)
In-Reply-To: <4DA261DA.2050404@oracle.com>
[-- Attachment #1: Type: text/plain, Size: 4329 bytes --]
Current implementation of s3c2410_nand_select_chip call
clk_disable every time when chip = -1 (de-select). This happend
multiple times even if chip was already de-selected. This causes
disabling clock even if they are already disabled and due to
nature of clock subsytem implementation this causes nand clock
to be disabled and newer enabled again.
Signed-off-by: Jiri Pinkava <jiri.pinkava@vscht.cz>
---
drivers/mtd/nand/s3c2410.c | 57
+++++++++++++++++++++++++++++++------------
1 files changed, 41 insertions(+), 16 deletions(-)
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index 33d832d..fbc37dc 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -54,8 +54,14 @@ static int hardware_ecc = 1;
static int hardware_ecc = 0;
#endif
+#define CLOCK_DISABLE 0
+#define CLOCK_ENABLE 1
+#define CLOCK_SUSPEND 2
+
+static int clock_state = CLOCK_DISABLE;
+
#ifdef CONFIG_MTD_NAND_S3C2410_CLKSTOP
-static int clock_stop = 1;
+static const int clock_stop = 1;
#else
static const int clock_stop = 0;
#endif
@@ -159,11 +165,33 @@ static struct s3c2410_platform_nand
*to_nand_plat(struct platform_device *dev)
return dev->dev.platform_data;
}
-static inline int allow_clk_stop(struct s3c2410_nand_info *info)
+static inline int allow_clk_suspend(struct s3c2410_nand_info *info)
{
return clock_stop;
}
+/**
+ * s3c2410_nand_clk_set_state - Enable, disable or suspend NAND clock.
+ * @info: The controller instance.
+ * @new_state: State to which clock should be set.
+ */
+static void s3c2410_nand_clk_set_state(struct s3c2410_nand_info *info,
+ int new_state)
+{
+ if (!allow_clk_suspend(info) && new_state == CLOCK_SUSPEND)
+ return;
+
+ if (clock_state == CLOCK_ENABLE) {
+ if (new_state != CLOCK_ENABLE)
+ clk_disable(info->clk);
+ } else {
+ if (new_state == CLOCK_ENABLE)
+ clk_enable(info->clk);
+ }
+
+ clock_state = new_state;
+}
+
/* timing calculations */
#define NS_IN_KHZ 1000000
@@ -333,8 +361,8 @@ static void s3c2410_nand_select_chip(struct mtd_info
*mtd, int chip)
nmtd = this->priv;
info = nmtd->info;
- if (chip != -1 && allow_clk_stop(info))
- clk_enable(info->clk);
+ if (chip != -1)
+ s3c2410_nand_clk_set_state(info, CLOCK_ENABLE);
cur = readl(info->sel_reg);
@@ -356,8 +384,8 @@ static void s3c2410_nand_select_chip(struct mtd_info
*mtd, int chip)
writel(cur, info->sel_reg);
- if (chip == -1 && allow_clk_stop(info))
- clk_disable(info->clk);
+ if (chip == -1)
+ s3c2410_nand_clk_set_state(info, CLOCK_SUSPEND);
}
/* s3c2410_nand_hwcontrol
@@ -694,8 +722,7 @@ static int s3c24xx_nand_remove(struct
platform_device *pdev)
/* free the common resources */
if (info->clk != NULL && !IS_ERR(info->clk)) {
- if (!allow_clk_stop(info))
- clk_disable(info->clk);
+ s3c2410_nand_clk_set_state(info, CLOCK_DISABLE);
clk_put(info->clk);
}
@@ -947,7 +974,7 @@ static int s3c24xx_nand_probe(struct platform_device
*pdev)
goto exit_error;
}
- clk_enable(info->clk);
+ s3c2410_nand_clk_set_state(info, CLOCK_ENABLE);
/* allocate and map the resource */
@@ -1026,9 +1053,9 @@ static int s3c24xx_nand_probe(struct
platform_device *pdev)
goto exit_error;
}
- if (allow_clk_stop(info)) {
+ if (allow_clk_suspend(info)) {
dev_info(&pdev->dev, "clock idle support enabled\n");
- clk_disable(info->clk);
+ s3c2410_nand_clk_set_state(info, CLOCK_SUSPEND);
}
pr_debug("initialised ok\n");
@@ -1059,8 +1086,7 @@ static int s3c24xx_nand_suspend(struct
platform_device *dev, pm_message_t pm)
writel(info->save_sel | info->sel_bit, info->sel_reg);
- if (!allow_clk_stop(info))
- clk_disable(info->clk);
+ s3c2410_nand_clk_set_state(info, CLOCK_DISABLE);
}
return 0;
@@ -1072,7 +1098,7 @@ static int s3c24xx_nand_resume(struct
platform_device *dev)
unsigned long sel;
if (info) {
- clk_enable(info->clk);
+ s3c2410_nand_clk_set_state(info, CLOCK_ENABLE);
s3c2410_nand_inithw(info);
/* Restore the state of the nFCE line. */
@@ -1082,8 +1108,7 @@ static int s3c24xx_nand_resume(struct
platform_device *dev)
sel |= info->save_sel & info->sel_bit;
writel(sel, info->sel_reg);
- if (allow_clk_stop(info))
- clk_disable(info->clk);
+ s3c2410_nand_clk_set_state(info, CLOCK_SUSPEND);
}
return 0;
--
1.7.4.4
[-- Attachment #2: 0001-nand-Fix-S3C-NAND-clock-stop.patch --]
[-- Type: text/x-patch, Size: 4499 bytes --]
>From 4fd7086f28d6452f1edafa903e7becd5a0f017c6 Mon Sep 17 00:00:00 2001
From: Jiri Pinkava <jiri.pinkava@vscht.cz>
Date: Mon, 11 Apr 2011 03:20:33 +0200
Subject: [PATCH] nand: Fix S3C NAND clock stop
Current implementation of s3c2410_nand_select_chip call
clk_disable every time when chip = -1 (de-select). This happend
multiple times even if chip was already de-selected. This causes
disabling clock even if they are already disabled and due to
nature of clock subsytem implementation this causes nand clock
to be disabled and newer enabled again.
Signed-off-by: Jiri Pinkava <jiri.pinkava@vscht.cz>
---
drivers/mtd/nand/s3c2410.c | 57 +++++++++++++++++++++++++++++++------------
1 files changed, 41 insertions(+), 16 deletions(-)
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index 33d832d..fbc37dc 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -54,8 +54,14 @@ static int hardware_ecc = 1;
static int hardware_ecc = 0;
#endif
+#define CLOCK_DISABLE 0
+#define CLOCK_ENABLE 1
+#define CLOCK_SUSPEND 2
+
+static int clock_state = CLOCK_DISABLE;
+
#ifdef CONFIG_MTD_NAND_S3C2410_CLKSTOP
-static int clock_stop = 1;
+static const int clock_stop = 1;
#else
static const int clock_stop = 0;
#endif
@@ -159,11 +165,33 @@ static struct s3c2410_platform_nand *to_nand_plat(struct platform_device *dev)
return dev->dev.platform_data;
}
-static inline int allow_clk_stop(struct s3c2410_nand_info *info)
+static inline int allow_clk_suspend(struct s3c2410_nand_info *info)
{
return clock_stop;
}
+/**
+ * s3c2410_nand_clk_set_state - Enable, disable or suspend NAND clock.
+ * @info: The controller instance.
+ * @new_state: State to which clock should be set.
+ */
+static void s3c2410_nand_clk_set_state(struct s3c2410_nand_info *info,
+ int new_state)
+{
+ if (!allow_clk_suspend(info) && new_state == CLOCK_SUSPEND)
+ return;
+
+ if (clock_state == CLOCK_ENABLE) {
+ if (new_state != CLOCK_ENABLE)
+ clk_disable(info->clk);
+ } else {
+ if (new_state == CLOCK_ENABLE)
+ clk_enable(info->clk);
+ }
+
+ clock_state = new_state;
+}
+
/* timing calculations */
#define NS_IN_KHZ 1000000
@@ -333,8 +361,8 @@ static void s3c2410_nand_select_chip(struct mtd_info *mtd, int chip)
nmtd = this->priv;
info = nmtd->info;
- if (chip != -1 && allow_clk_stop(info))
- clk_enable(info->clk);
+ if (chip != -1)
+ s3c2410_nand_clk_set_state(info, CLOCK_ENABLE);
cur = readl(info->sel_reg);
@@ -356,8 +384,8 @@ static void s3c2410_nand_select_chip(struct mtd_info *mtd, int chip)
writel(cur, info->sel_reg);
- if (chip == -1 && allow_clk_stop(info))
- clk_disable(info->clk);
+ if (chip == -1)
+ s3c2410_nand_clk_set_state(info, CLOCK_SUSPEND);
}
/* s3c2410_nand_hwcontrol
@@ -694,8 +722,7 @@ static int s3c24xx_nand_remove(struct platform_device *pdev)
/* free the common resources */
if (info->clk != NULL && !IS_ERR(info->clk)) {
- if (!allow_clk_stop(info))
- clk_disable(info->clk);
+ s3c2410_nand_clk_set_state(info, CLOCK_DISABLE);
clk_put(info->clk);
}
@@ -947,7 +974,7 @@ static int s3c24xx_nand_probe(struct platform_device *pdev)
goto exit_error;
}
- clk_enable(info->clk);
+ s3c2410_nand_clk_set_state(info, CLOCK_ENABLE);
/* allocate and map the resource */
@@ -1026,9 +1053,9 @@ static int s3c24xx_nand_probe(struct platform_device *pdev)
goto exit_error;
}
- if (allow_clk_stop(info)) {
+ if (allow_clk_suspend(info)) {
dev_info(&pdev->dev, "clock idle support enabled\n");
- clk_disable(info->clk);
+ s3c2410_nand_clk_set_state(info, CLOCK_SUSPEND);
}
pr_debug("initialised ok\n");
@@ -1059,8 +1086,7 @@ static int s3c24xx_nand_suspend(struct platform_device *dev, pm_message_t pm)
writel(info->save_sel | info->sel_bit, info->sel_reg);
- if (!allow_clk_stop(info))
- clk_disable(info->clk);
+ s3c2410_nand_clk_set_state(info, CLOCK_DISABLE);
}
return 0;
@@ -1072,7 +1098,7 @@ static int s3c24xx_nand_resume(struct platform_device *dev)
unsigned long sel;
if (info) {
- clk_enable(info->clk);
+ s3c2410_nand_clk_set_state(info, CLOCK_ENABLE);
s3c2410_nand_inithw(info);
/* Restore the state of the nFCE line. */
@@ -1082,8 +1108,7 @@ static int s3c24xx_nand_resume(struct platform_device *dev)
sel |= info->save_sel & info->sel_bit;
writel(sel, info->sel_reg);
- if (allow_clk_stop(info))
- clk_disable(info->clk);
+ s3c2410_nand_clk_set_state(info, CLOCK_SUSPEND);
}
return 0;
--
1.7.4.4
next prev parent reply other threads:[~2011-04-11 3:15 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-11 1:27 [PATCH] nand: Fix S3C NAND clock stop Jiri Pinkava
2011-04-11 2:05 ` Randy Dunlap
2011-04-11 3:15 ` Jiří Pinkava [this message]
2011-04-11 14:48 ` Jiri Pinkava
2011-04-13 3:36 ` Artem Bityutskiy
2011-04-13 9:59 ` [PATCH 1/2] " Jiri Pinkava
2011-04-13 9:59 ` [PATCH 2/2] nand: Remove unnecessary variable Jiri Pinkava
2011-04-14 12:17 ` Artem Bityutskiy
2011-04-14 12:16 ` [PATCH 1/2] nand: Fix S3C NAND clock stop Artem Bityutskiy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4DA27245.6@vscht.cz \
--to=jiri.pinkava@vscht.cz \
--cc=ben-linux@fluff.org \
--cc=dwmw2@infradead.org \
--cc=kgene.kim@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=randy.dunlap@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).