* 2.6.38.5-rc1 usb problem
@ 2011-05-02 8:31 Klaus Dittrich
2011-05-02 8:57 ` Oliver Neukum
0 siblings, 1 reply; 3+ messages in thread
From: Klaus Dittrich @ 2011-05-02 8:31 UTC (permalink / raw)
To: linux-kernel
With 2.6.38.5-rc1 my usb-scanner will be not detected, with 2.6.38.4 it
will.
System is Intel Q9550 SMP 64-bit
/var/log/messages ..
May 2 10:07:12 x1 klogd: [ 3030.380011] usb 3-1: new full speed USB device using uhci_hcd and address 16
May 2 10:07:27 x1 klogd: [ 3045.500013] usb 3-1: device descriptor read/64, error -110
May 2 10:07:42 x1 klogd: [ 3060.730008] usb 3-1: device descriptor read/64, error -110
May 2 10:07:42 x1 klogd: [ 3060.960012] usb 3-1: new full speed USB device using uhci_hcd and address 17
May 2 10:07:57 x1 klogd: [ 3076.080010] usb 3-1: device descriptor read/64, error -110
May 2 10:08:13 x1 klogd: [ 3091.310011] usb 3-1: device descriptor read/64, error -110
May 2 10:08:13 x1 klogd: [ 3091.540009] usb 3-1: new full speed USB device using uhci_hcd and address 18
May 2 10:08:23 x1 klogd: [ 3101.960009] usb 3-1: device not accepting address 18, error -110
May 2 10:08:23 x1 klogd: [ 3102.080009] usb 3-1: new full speed USB device using uhci_hcd and address 19
May 2 10:08:34 x1 klogd: [ 3112.500010] usb 3-1: device not accepting address 19, error -110
May 2 10:08:34 x1 klogd: [ 3112.500024] hub 3-0:1.0: unable to enumerate USB device on port 1
/var/log/messages of 2.6.38.4
May 2 10:17:56 x1 klogd: [ 61.308007] usb 7-2: new full speed USB device using uhci_hcd and address 2
May 2 10:17:57 x1 klogd: [ 61.472210] usb 7-2: New USB device found, idVendor=10c4, idProduct=ea60
May 2 10:17:57 x1 klogd: [ 61.472213] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
May 2 10:17:57 x1 klogd: [ 61.472215] usb 7-2: Product: CP2102 USB to UART Bridge Controller
May 2 10:17:57 x1 klogd: [ 61.472217] usb 7-2: Manufacturer: Silicon Labs May 2 10:17:57 x1 klogd: [ 61.472219] usb 7-2: SerialNumber: 0001
May 2 10:18:08 x1 klogd: [ 73.328009] usb 3-1: new full speed USB device using uhci_hcd and address 4
May 2 10:18:09 x1 klogd: [ 73.842237] usb 3-1: New USB device found, idVendor=04b8, idProduct=010a
May 2 10:18:09 x1 klogd: [ 73.842239] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
May 2 10:18:09 x1 klogd: [ 73.842242] usb 3-1: Product: Perfection1640 May 2 10:18:09 x1 klogd: [ 73.842243] usb 3-1: Manufacturer: EPSON
Please cc me, I am not subscribed.
--
Klaus
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: 2.6.38.5-rc1 usb problem
2011-05-02 8:31 2.6.38.5-rc1 usb problem Klaus Dittrich
@ 2011-05-02 8:57 ` Oliver Neukum
[not found] ` <4DBE8B88.2080104@df1tl.local.here>
0 siblings, 1 reply; 3+ messages in thread
From: Oliver Neukum @ 2011-05-02 8:57 UTC (permalink / raw)
To: Klaus Dittrich; +Cc: linux-kernel
Am Montag, 2. Mai 2011, 10:31:17 schrieb Klaus Dittrich:
> With 2.6.38.5-rc1 my usb-scanner will be not detected, with 2.6.38.4 it
> will.
This must be an odd side effect. Can you bisect?
Regards
Oliver
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: 2.6.38.5-rc1 usb problem
[not found] ` <201105021252.30677.oneukum@suse.de>
@ 2011-05-02 12:56 ` Klaus Dittrich
0 siblings, 0 replies; 3+ messages in thread
From: Klaus Dittrich @ 2011-05-02 12:56 UTC (permalink / raw)
To: Oliver Neukum; +Cc: linux-kernel
I did some further tests.
When I switch on the scanner I gets not recognized. as described before.
If I then disconnect the usb-cable, of the already switched on scanner,
and then reconnect it, the scanner gets recognized.
new full speed USB device using uhci_hcd
Product: Perfection1640
Manufacturer: EPSON
A timing problem?
My camera, has no problems.
new high speed USB device using ehci_hcd
Product: Canon Digital Camera
Manufacturer: Canon Inc.
Hope this helps to localise the problem.
--
Klaus
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2011-05-02 12:56 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-05-02 8:31 2.6.38.5-rc1 usb problem Klaus Dittrich
2011-05-02 8:57 ` Oliver Neukum
[not found] ` <4DBE8B88.2080104@df1tl.local.here>
[not found] ` <201105021252.30677.oneukum@suse.de>
2011-05-02 12:56 ` Klaus Dittrich
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox