From: Yinghai Lu <yinghai@kernel.org>
To: Ram Pai <linuxram@us.ibm.com>, Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>
Subject: [PATCH 1/2] pci: Using add_list in pcie hotplug path.
Date: Fri, 06 May 2011 13:43:42 -0700 [thread overview]
Message-ID: <4DC45D7E.3020900@kernel.org> (raw)
In-Reply-To: <4DC4586C.6020308@kernel.org>
During pci remove/rescan testing found:
[ 541.141614] pci 0000:c0:03.0: PCI bridge to [bus c4-c9]
[ 541.141965] pci 0000:c0:03.0: bridge window [io 0x1000-0x0fff]
[ 541.159181] pci 0000:c0:03.0: bridge window [mem 0xf0000000-0xf00fffff]
[ 541.159540] pci 0000:c0:03.0: bridge window [mem 0xfc180000000-0xfc197ffffff 64bit pref]
[ 541.179374] pci 0000:c0:03.0: device not available (can't reserve [io 0x1000-0x0fff])
[ 541.199198] pci 0000:c0:03.0: Error enabling bridge (-22), continuing
[ 541.199202] pci 0000:c0:03.0: enabling bus mastering
[ 541.199209] pci 0000:c0:03.0: setting latency timer to 64
[ 541.199917] pcieport 0000:c0:03.0: device not available (can't reserve [io 0x1000-0x0fff])
[ 541.199963] pcieport: probe of 0000:c0:03.0 failed with error -22
This bug was uncovered by commit
| commit c8adf9a3e873eddaaec11ac410a99ef6b9656938
| Author: Ram Pai <linuxram@us.ibm.com>
| Date: Mon Feb 14 17:43:20 2011 -0800
|
| PCI: pre-allocate additional resources to devices only after successful allo
cation of essential resources.
After that commit, pci_hotplug_io_size is changed to additional_io_size from minium size.
So it will not get into failed list, and will not be reset there.
It turns out we need to add_head for those calling.
So those resource get reset properly.
after patch, will get right result:
[ 621.206655] pci 0000:c0:03.0: PCI bridge to [bus c4-c9]
[ 621.206912] pci 0000:c0:03.0: bridge window [io disabled]
[ 621.226594] pci 0000:c0:03.0: bridge window [mem 0xf0000000-0xf00fffff]
[ 621.226904] pci 0000:c0:03.0: bridge window [mem 0xfc180000000-0xfc197ffffff 64bit pref]
[ 621.247012] pci 0000:c0:03.0: enabling bus mastering
[ 621.247275] pci 0000:c0:03.0: setting latency timer to 64
[ 621.267656] pcieport 0000:c0:03.0: setting latency timer to 64
[ 621.268134] pcieport 0000:c0:03.0: irq 160 for MSI/MSI-X
[ 621.286832] pcieport 0000:c0:03.0: Signaling PME through PCIe PME interrupt
[ 621.306360] pci 0000:c4:00.0: Signaling PME through PCIe PME interrupt
[ 621.306684] pcie_pme 0000:c0:03.0:pcie01: service driver pcie_pme loaded
[ 621.326512] aer 0000:c0:03.0:pcie02: service driver aer loaded
[ 621.326911] pciehp 0000:c0:03.0:pcie04: Hotplug Controller:
We also need this patch when pluging in hotplug chassis without cards.
-v2: update a little bit descriptions.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
drivers/pci/setup-bus.c | 18 ++++++++++++------
1 file changed, 12 insertions(+), 6 deletions(-)
Index: linux-2.6/drivers/pci/setup-bus.c
===================================================================
--- linux-2.6.orig/drivers/pci/setup-bus.c
+++ linux-2.6/drivers/pci/setup-bus.c
@@ -217,13 +217,14 @@ static void __assign_resources_sorted(st
}
static void pdev_assign_resources_sorted(struct pci_dev *dev,
+ struct resource_list_x *add_head,
struct resource_list_x *fail_head)
{
struct resource_list head;
head.next = NULL;
__dev_sort_resources(dev, &head);
- __assign_resources_sorted(&head, NULL, fail_head);
+ __assign_resources_sorted(&head, add_head, fail_head);
}
@@ -852,17 +853,19 @@ void __ref pci_bus_assign_resources(cons
EXPORT_SYMBOL(pci_bus_assign_resources);
static void __ref __pci_bridge_assign_resources(const struct pci_dev *bridge,
+ struct resource_list_x *add_head,
struct resource_list_x *fail_head)
{
struct pci_bus *b;
- pdev_assign_resources_sorted((struct pci_dev *)bridge, fail_head);
+ pdev_assign_resources_sorted((struct pci_dev *)bridge,
+ add_head, fail_head);
b = bridge->subordinate;
if (!b)
return;
- __pci_bus_assign_resources(b, NULL, fail_head);
+ __pci_bus_assign_resources(b, add_head, fail_head);
switch (bridge->class >> 8) {
case PCI_CLASS_BRIDGE_PCI:
@@ -1129,6 +1132,8 @@ enable_and_dump:
void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge)
{
struct pci_bus *parent = bridge->subordinate;
+ struct resource_list_x add_list; /* list of resources that
+ want additional resources */
int tried_times = 0;
struct resource_list_x head, *list;
int retval;
@@ -1136,11 +1141,12 @@ void pci_assign_unassigned_bridge_resour
IORESOURCE_PREFETCH;
head.next = NULL;
+ add_list.next = NULL;
again:
- pci_bus_size_bridges(parent);
- __pci_bridge_assign_resources(bridge, &head);
-
+ __pci_bus_size_bridges(parent, &add_list);
+ __pci_bridge_assign_resources(bridge, &add_list, &head);
+ BUG_ON(add_list.next);
tried_times++;
if (!head.next)
next prev parent reply other threads:[~2011-05-06 20:44 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-05 7:24 [PATCH] pci: Check bridge resources after resource allocation Yinghai Lu
2011-05-06 8:12 ` Ram Pai
2011-05-06 20:22 ` Yinghai Lu
2011-05-06 20:43 ` Yinghai Lu [this message]
2011-05-06 20:44 ` [PATCH 2/2] pci: honor child buses add_size in hot plug configuration Yinghai Lu
2011-05-07 1:52 ` [PATCH] pci: Check bridge resources after resource allocation Ram Pai
2011-05-07 2:37 ` Yinghai Lu
2011-05-08 7:55 ` [PATCH -v2] " Yinghai Lu
2011-05-09 21:20 ` Jesse Barnes
2011-05-09 22:36 ` Linus Torvalds
2011-05-11 1:19 ` Yinghai Lu
2011-05-12 18:06 ` Ram Pai
2011-05-12 18:14 ` Linus Torvalds
2011-05-12 18:22 ` Ram Pai
2011-05-12 18:37 ` Jesse Barnes
2011-05-12 19:18 ` Linus Torvalds
2011-05-12 19:34 ` Jesse Barnes
2011-05-14 1:06 ` Yinghai Lu
2011-05-16 7:59 ` Ram Pai
2011-05-16 20:55 ` Yinghai Lu
2011-05-16 22:36 ` Ram Pai
2011-05-17 3:52 ` Jesse Barnes
2011-05-17 5:22 ` Linus Torvalds
2011-05-12 18:22 ` Yinghai Lu
2011-05-12 18:30 ` Yinghai Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4DC45D7E.3020900@kernel.org \
--to=yinghai@kernel.org \
--cc=jbarnes@virtuousgeek.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linuxram@us.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).