From: Christian Kujau <lists@nerdbynature.de>
To: LKML <linux-kernel@vger.kernel.org>
Subject: 2.6.32: Attempted to kill the idle task?
Date: Wed, 01 Jun 2011 12:07:01 -0700 [thread overview]
Message-ID: <4DE68DD5.4080702@nerdbynature.de> (raw)
[-- Attachment #1: Type: text/plain, Size: 1963 bytes --]
Hi,
we have a Debian/lenny system (Dell R410) with its "latest"
2.6.32+27~bpo50+1 installed. From time to time the system tends to oops.
Can someone have a quick look at the following, if this makes sense at
all? I suspect the "real" oops message has scrolled away, but this is
all we got so far:
------------------------------------
[4330423.071859] RSP <ffff88012fffdcb8>
[4330423.071926] ---[ end trace b471cad78827bf8a ]--—
[4330423.071994] Kernel panic - not syncing: Attempted to kill the idle
task? [4330423.072068] rid: 0, comm: swapper Tainted: G D 2.6.32-5-amd64
81 [4330423.072139] Call Trace:
[4330423.072206] [afffffff81216ee5>] ? panic+0x86/0x141
[4330423.072277] [afffffff812f6fee>1 ? printk+0x4e/0x58
[4330423.072349] [afffffff81041c07>] ? do_exit+0x72/0x6b5
[4330423.072419] [afffffff8104d011>] ? release_console_sem+0xl7e/0xlaf
[4330423.072493] [afffffff812f9c4d>1 ? oops_end+0xaf/0xb4
[4330423.072563] [afffffff81012734>] ? do_divide_error+0x85/0x81
[4330423.072635] [afffffff81043bdb>1 ? find_busiest_group+0x3cf/0x875
[4330423.072709] [afffffff81192d8a>1 ? vsnprintf+0x9e/0x449
[4330423.072782] [afffffff811b5815>] ? write_vga+0x17/0x4c
[4330423.072852] [afffffff810118db>1 ? divide_error+0x1b/0x20
[4330423.072925] [afffffff81039401>] ? get_avenrun+0x14/0x32
[4330423.072996] [afffffff81043bdb>1 ? find_busiest_group+0x3cf/0x875
[4330423.073069] [afffffff81043b80>] ? find_busiest_group+0x374/0x875
[4330423.073141] [afffffff8103ec61>] ? update_curr+0x131/0x147
[4330423.073212] [afffffff8101651f>1 ? sched_clock+0x5/0x8
[4330423.073283] [afffffff81016539>] ? read_tsc+0xa/0x20
[4330423.073353] [afffffff812f7487>] ? schedule+0x2cc/0x7da
[4330423.073424] [afffffff8106ea2b>1 ? tick_dev_program_event+0x2d/0x95
[4330423.073497] [afffffff8100fee7>] 1 cpu_idle+Oxd8/0xda
------------------------------------
The "original" is attached as a .png, the above is the product of an OCR
conversion.
Thanks,
Christian.
--
make bzImage, not war
[-- Attachment #2: p2.png --]
[-- Type: image/png, Size: 43063 bytes --]
[-- Attachment #3: dmesg_i.txt --]
[-- Type: text/plain, Size: 71325 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-21~ipx+1) (schultheiss@ip-exchange.de) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 SMP Fri Aug 20 08:01:09 CES
[ 0.000000] Command line: root=/dev/sda2 ro
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cf679000 (usable)
[ 0.000000] BIOS-e820: 00000000cf679000 - 00000000cf68f000 (reserved)
[ 0.000000] BIOS-e820: 00000000cf68f000 - 00000000cf6ce000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cf6ce000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] DMI 2.6 present.
[ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-EBFFF uncachable
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 base 00C0000000 mask FFF0000000 write-back
[ 0.000000] 3 base 0100000000 mask FFE0000000 write-back
[ 0.000000] 4 base 0120000000 mask FFF0000000 write-back
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcf679 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cf679000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00cf600000 page 2M
[ 0.000000] 00cf600000 - 00cf679000 page 4k
[ 0.000000] kernel direct mapping tables up to cf679000 @ 8000-b000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000
[ 0.000000] 0100000000 - 0130000000 page 2M
[ 0.000000] kernel direct mapping tables up to 130000000 @ a000-c000
[ 0.000000] RAMDISK: 3788c000 - 37fefd71
[ 0.000000] ACPI: RSDP 00000000000f09e0 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 00000000000f0ae4 0009C (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: FACP 00000000cf6b3f9c 000F4 (v03 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: DSDT 00000000cf68f000 03B39 (v01 DELL PE_SC3 00000001 INTL 20050624)
[ 0.000000] ACPI: FACS 00000000cf6b6000 00040
[ 0.000000] ACPI: APIC 00000000cf6b3478 0015E (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SPCR 00000000cf6b35d8 00050 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: HPET 00000000cf6b362c 00038 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: DM__ 00000000cf6b3668 001C0 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: MCFG 00000000cf6b38c4 0003C (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: WD__ 00000000cf6b3904 00134 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SLIC 00000000cf6b3a3c 00176 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: ERST 00000000cf692cbc 00270 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: HEST 00000000cf692f2c 003A8 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: BERT 00000000cf692b3c 00030 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: EINJ 00000000cf692b6c 00150 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SRAT 00000000cf6b3bc0 00370 (v01 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: TCPA 00000000cf6b3f34 00064 (v02 DELL PE_SC3 00000001 DELL 00000001)
[ 0.000000] ACPI: SSDT 00000000cf6b7000 043F4 (v01 INTEL PPM RCM 80000001 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 1 -> APIC 32 -> Node 0
[ 0.000000] SRAT: PXM 2 -> APIC 0 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 34 -> Node 0
[ 0.000000] SRAT: PXM 2 -> APIC 2 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 50 -> Node 0
[ 0.000000] SRAT: PXM 2 -> APIC 18 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 52 -> Node 0
[ 0.000000] SRAT: PXM 2 -> APIC 20 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 33 -> Node 0
[ 0.000000] SRAT: PXM 2 -> APIC 1 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 35 -> Node 0
[ 0.000000] SRAT: PXM 2 -> APIC 3 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 51 -> Node 0
[ 0.000000] SRAT: PXM 2 -> APIC 19 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 53 -> Node 0
[ 0.000000] SRAT: PXM 2 -> APIC 21 -> Node 1
[ 0.000000] SRAT: Node 1 PXM 2 0-80000000
[ 0.000000] SRAT: Node 0 PXM 1 80000000-d0000000
[ 0.000000] SRAT: Node 0 PXM 1 100000000-130000000
[ 0.000000] NUMA: Using 31 for the hash shift.
[ 0.000000] Bootmem setup node 0 0000000080000000-0000000130000000
[ 0.000000] NODE_DATA [0000000080000000 - 0000000080007fff]
[ 0.000000] bootmap [0000000080008000 - 000000008001dfff] pages 16
[ 0.000000] (8 early reservations) ==> bootmem [0080000000 - 0130000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE
[ 0.000000] #2 [0001000000 - 0001680354] TEXT DATA BSS
[ 0.000000] #3 [003788c000 - 0037fefd71] RAMDISK
[ 0.000000] #4 [000009e800 - 0000100000] BIOS reserved
[ 0.000000] #5 [0001681000 - 000168132d] BRK
[ 0.000000] #6 [0000008000 - 000000a000] PGTABLE
[ 0.000000] #7 [000000a000 - 000000b000] PGTABLE
[ 0.000000] Bootmem setup node 1 0000000000000000-0000000080000000
[ 0.000000] NODE_DATA [000000000000b000 - 0000000000012fff]
[ 0.000000] bootmap [0000000000013000 - 0000000000022fff] pages 10
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0080000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001680354] TEXT DATA BSS ==> [0001000000 - 0001680354]
[ 0.000000] #3 [003788c000 - 0037fefd71] RAMDISK ==> [003788c000 - 0037fefd71]
[ 0.000000] #4 [000009e800 - 0000100000] BIOS reserved ==> [000009e800 - 0000100000]
[ 0.000000] #5 [0001681000 - 000168132d] BRK ==> [0001681000 - 000168132d]
[ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
[ 0.000000] #7 [000000a000 - 000000b000] PGTABLE ==> [000000a000 - 000000b000]
[ 0.000000] found SMP MP-table at [ffff8800000fe710] fe710
[ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880001800000-ffff8800033fffff] on node 1
[ 0.000000] [ffffea0001c00000-ffffea00043fffff] PMD -> [ffff880080200000-ffff880081ffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00130000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 1: 0x00000000 -> 0x000000a0
[ 0.000000] 1: 0x00000100 -> 0x00080000
[ 0.000000] 0: 0x00080000 -> 0x000cf679
[ 0.000000] 0: 0x00100000 -> 0x00130000
[ 0.000000] On node 0 totalpages: 521849
[ 0.000000] DMA32 zone: 7168 pages used for memmap
[ 0.000000] DMA32 zone: 318073 pages, LIFO batch:31
[ 0.000000] Normal zone: 2688 pages used for memmap
[ 0.000000] Normal zone: 193920 pages, LIFO batch:31
[ 0.000000] On node 1 totalpages: 524192
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 103 pages reserved
[ 0.000000] DMA zone: 3841 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7112 pages used for memmap
[ 0.000000] DMA32 zone: 513080 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x20] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x22] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x32] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x34] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x14] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x21] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x23] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x33] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x35] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x15] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x30] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x31] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x32] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x33] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x34] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x35] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x36] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x37] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0x38] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x39] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x3a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x3b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x3c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x3d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x3e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x20] lapic_id[0x3f] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec80000] gsi_base[32])
[ 0.000000] IOAPIC[1]: apic_id 1, version 32, address 0xfec80000, GSI 32-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 32 CPUs, 16 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 56
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cf679000 - 00000000cf68f000
[ 0.000000] PM: Registered nosave memory: 00000000cf68f000 - 00000000cf6ce000
[ 0.000000] PM: Registered nosave memory: 00000000cf6ce000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fe000000
[ 0.000000] PM: Registered nosave memory: 00000000fe000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:10000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:32 nr_node_ids:2
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880003600000 s90328 r8192 d24360 u131072
[ 0.000000] pcpu-alloc: s90328 r8192 d24360 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 02 04 06 08 10 12 14 16 18 20 22 24 26 28 30
[ 0.000000] pcpu-alloc: [1] 01 03 05 07 09 11 13 15 17 19 21 23 25 27 29 31
[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1028914
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/sda2 ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff8800037fe000 - ffff8800077fe000
[ 0.000000] software IO TLB at phys 0x37fe000 - 0x77fe000
[ 0.000000] Memory: 4040176k/4980736k available (3067k kernel code, 796572k absent, 143988k reserved, 1870k data, 584k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=2
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:1208
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 2393.959 MHz processor.
[ 0.000009] Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.91 BogoMIPS (lpj=9575836)
[ 0.000157] Security Framework initialized
[ 0.000224] SELinux: Disabled at boot.
[ 0.000522] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001612] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.002142] Mount-cache hash table entries: 256
[ 0.002370] Initializing cgroup subsys ns
[ 0.002436] Initializing cgroup subsys cpuacct
[ 0.002505] Initializing cgroup subsys devices
[ 0.002570] Initializing cgroup subsys freezer
[ 0.002635] Initializing cgroup subsys net_cls
[ 0.002718] CPU: Physical Processor ID: 1
[ 0.002782] CPU: Processor Core ID: 0
[ 0.002848] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.002956] CPU: L2 cache: 256K
[ 0.003018] CPU: L3 cache: 12288K
[ 0.003082] CPU 0/0x20 -> Node 0
[ 0.003146] mce: CPU supports 9 MCE banks
[ 0.003219] CPU0: Thermal monitoring enabled (TM1)
[ 0.003286] CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 CMCI:8
[ 0.003612] using mwait in idle threads.
[ 0.003676] Performance Events: Westmere events, Intel PMU driver.
[ 0.003831] ... version: 3
[ 0.003895] ... bit width: 48
[ 0.003959] ... generic registers: 4
[ 0.004022] ... value mask: 0000ffffffffffff
[ 0.004088] ... max period: 000000007fffffff
[ 0.004154] ... fixed-purpose events: 3
[ 0.004218] ... event mask: 000000070000000f
[ 0.005088] ACPI: Core revision 20090903
[ 0.011383] Setting APIC routing to physical flat
[ 0.011887] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.051567] CPU0: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
[ 0.156463] Booting processor 1 APIC 0x0 ip 0x6000
[ 0.167063] Initializing CPU#1
[ 0.244194] CPU: Physical Processor ID: 0
[ 0.244195] CPU: Processor Core ID: 0
[ 0.244198] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.244200] CPU: L2 cache: 256K
[ 0.244202] CPU: L3 cache: 12288K
[ 0.244205] CPU 1/0x0 -> Node 1
[ 0.244218] CPU1: Thermal monitoring enabled (TM1)
[ 0.244222] CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 CMCI:8
[ 0.244310] CPU1: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
[ 0.245032] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.265171] Booting processor 2 APIC 0x22 ip 0x6000
[ 0.276395] Initializing CPU#2
[ 0.355996] CPU: Physical Processor ID: 1
[ 0.355997] CPU: Processor Core ID: 1
[ 0.355999] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.356001] CPU: L2 cache: 256K
[ 0.356001] CPU: L3 cache: 12288K
[ 0.356004] CPU 2/0x22 -> Node 0
[ 0.356014] CPU2: Thermal monitoring enabled (TM1)
[ 0.356017] CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.356091] CPU2: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
[ 0.356814] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.376991] Booting processor 3 APIC 0x2 ip 0x6000
[ 0.387591] Initializing CPU#3
[ 0.467801] CPU: Physical Processor ID: 0
[ 0.467803] CPU: Processor Core ID: 1
[ 0.467806] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.467808] CPU: L2 cache: 256K
[ 0.467809] CPU: L3 cache: 12288K
[ 0.467813] CPU 3/0x2 -> Node 1
[ 0.467826] CPU3: Thermal monitoring enabled (TM1)
[ 0.467829] CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.467871] CPU3: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
[ 0.468591] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.488733] Booting processor 4 APIC 0x32 ip 0x6000
[ 0.499215] Initializing CPU#4
[ 0.579604] CPU: Physical Processor ID: 1
[ 0.579605] CPU: Processor Core ID: 9
[ 0.579607] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.579608] CPU: L2 cache: 256K
[ 0.579609] CPU: L3 cache: 12288K
[ 0.579612] CPU 4/0x32 -> Node 0
[ 0.579621] CPU4: Thermal monitoring enabled (TM1)
[ 0.579624] CPU 4 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.579652] CPU4: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
[ 0.580375] checking TSC synchronization [CPU#0 -> CPU#4]: passed.
[ 0.600549] Booting processor 5 APIC 0x12 ip 0x6000
[ 0.611150] Initializing CPU#5
[ 0.691409] CPU: Physical Processor ID: 0
[ 0.691411] CPU: Processor Core ID: 9
[ 0.691414] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.691416] CPU: L2 cache: 256K
[ 0.691417] CPU: L3 cache: 12288K
[ 0.691420] CPU 5/0x12 -> Node 1
[ 0.691434] CPU5: Thermal monitoring enabled (TM1)
[ 0.691437] CPU 5 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.691467] CPU5: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
[ 0.692188] checking TSC synchronization [CPU#0 -> CPU#5]: passed.
[ 0.712328] Booting processor 6 APIC 0x34 ip 0x6000
[ 0.722807] Initializing CPU#6
[ 0.803212] CPU: Physical Processor ID: 1
[ 0.803213] CPU: Processor Core ID: 10
[ 0.803215] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.803216] CPU: L2 cache: 256K
[ 0.803217] CPU: L3 cache: 12288K
[ 0.803219] CPU 6/0x34 -> Node 0
[ 0.803229] CPU6: Thermal monitoring enabled (TM1)
[ 0.803232] CPU 6 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.803247] CPU6: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
[ 0.803971] checking TSC synchronization [CPU#0 -> CPU#6]: passed.
[ 0.824148] Booting processor 7 APIC 0x14 ip 0x6000
[ 0.834747] Initializing CPU#7
[ 0.915017] CPU: Physical Processor ID: 0
[ 0.915019] CPU: Processor Core ID: 10
[ 0.915022] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.915024] CPU: L2 cache: 256K
[ 0.915025] CPU: L3 cache: 12288K
[ 0.915028] CPU 7/0x14 -> Node 1
[ 0.915041] CPU7: Thermal monitoring enabled (TM1)
[ 0.915045] CPU 7 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.915085] CPU7: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
[ 0.915807] checking TSC synchronization [CPU#0 -> CPU#7]: passed.
[ 0.935956] Booting processor 8 APIC 0x21 ip 0x6000
[ 0.946438] Initializing CPU#8
[ 1.026820] CPU: Physical Processor ID: 1
[ 1.026821] CPU: Processor Core ID: 0
[ 1.026824] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 1.026826] CPU: L2 cache: 256K
[ 1.026827] CPU: L3 cache: 12288K
[ 1.026829] CPU 8/0x21 -> Node 0
[ 1.026840] CPU8: Thermal monitoring enabled (TM1)
[ 1.026843] CPU 8 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 1.026889] CPU8: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
[ 1.027618] checking TSC synchronization [CPU#0 -> CPU#8]: passed.
[ 1.047797] Booting processor 9 APIC 0x1 ip 0x6000
[ 1.058397] Initializing CPU#9
[ 1.138625] CPU: Physical Processor ID: 0
[ 1.138626] CPU: Processor Core ID: 0
[ 1.138629] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 1.138631] CPU: L2 cache: 256K
[ 1.138633] CPU: L3 cache: 12288K
[ 1.138635] CPU 9/0x1 -> Node 1
[ 1.138648] CPU9: Thermal monitoring enabled (TM1)
[ 1.138652] CPU 9 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 1.138715] CPU9: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
[ 1.139437] checking TSC synchronization [CPU#0 -> CPU#9]: passed.
[ 1.159578] Booting processor 10 APIC 0x23 ip 0x6000
[ 1.170056] Initializing CPU#10
[ 1.250427] CPU: Physical Processor ID: 1
[ 1.250428] CPU: Processor Core ID: 1
[ 1.250431] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 1.250432] CPU: L2 cache: 256K
[ 1.250433] CPU: L3 cache: 12288K
[ 1.250435] CPU 10/0x23 -> Node 0
[ 1.250445] CPU10: Thermal monitoring enabled (TM1)
[ 1.250447] CPU 10 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 1.250497] CPU10: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
[ 1.251242] checking TSC synchronization [CPU#0 -> CPU#10]: passed.
[ 1.271431] Booting processor 11 APIC 0x3 ip 0x6000
[ 1.282030] Initializing CPU#11
[ 1.362233] CPU: Physical Processor ID: 0
[ 1.362234] CPU: Processor Core ID: 1
[ 1.362237] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 1.362239] CPU: L2 cache: 256K
[ 1.362240] CPU: L3 cache: 12288K
[ 1.362243] CPU 11/0x3 -> Node 1
[ 1.362256] CPU11: Thermal monitoring enabled (TM1)
[ 1.362259] CPU 11 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 1.362349] CPU11: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
[ 1.363085] checking TSC synchronization [CPU#0 -> CPU#11]: passed.
[ 1.383225] Booting processor 12 APIC 0x33 ip 0x6000
[ 1.393706] Initializing CPU#12
[ 1.474035] CPU: Physical Processor ID: 1
[ 1.474036] CPU: Processor Core ID: 9
[ 1.474039] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 1.474040] CPU: L2 cache: 256K
[ 1.474041] CPU: L3 cache: 12288K
[ 1.474043] CPU 12/0x33 -> Node 0
[ 1.474053] CPU12: Thermal monitoring enabled (TM1)
[ 1.474055] CPU 12 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 1.474159] CPU12: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
[ 1.479923] checking TSC synchronization [CPU#0 -> CPU#12]: passed.
[ 1.500102] Booting processor 13 APIC 0x13 ip 0x6000
[ 1.510703] Initializing CPU#13
[ 1.589833] CPU: Physical Processor ID: 0
[ 1.589835] CPU: Processor Core ID: 9
[ 1.589838] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 1.589840] CPU: L2 cache: 256K
[ 1.589841] CPU: L3 cache: 12288K
[ 1.589844] CPU 13/0x13 -> Node 1
[ 1.589857] CPU13: Thermal monitoring enabled (TM1)
[ 1.589861] CPU 13 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 1.589931] CPU13: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
[ 1.590666] checking TSC synchronization [CPU#0 -> CPU#13]: passed.
[ 1.610809] Booting processor 14 APIC 0x35 ip 0x6000
[ 1.621290] Initializing CPU#14
[ 1.701636] CPU: Physical Processor ID: 1
[ 1.701637] CPU: Processor Core ID: 10
[ 1.701639] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 1.701641] CPU: L2 cache: 256K
[ 1.701641] CPU: L3 cache: 12288K
[ 1.701644] CPU 14/0x35 -> Node 0
[ 1.701653] CPU14: Thermal monitoring enabled (TM1)
[ 1.701656] CPU 14 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 1.701732] CPU14: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
[ 1.702469] checking TSC synchronization [CPU#0 -> CPU#14]: passed.
[ 1.722648] Booting processor 15 APIC 0x15 ip 0x6000
[ 1.733248] Initializing CPU#15
[ 1.813441] CPU: Physical Processor ID: 0
[ 1.813443] CPU: Processor Core ID: 10
[ 1.813446] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 1.813448] CPU: L2 cache: 256K
[ 1.813449] CPU: L3 cache: 12288K
[ 1.813452] CPU 15/0x15 -> Node 1
[ 1.813465] CPU15: Thermal monitoring enabled (TM1)
[ 1.813469] CPU 15 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 1.813567] CPU15: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
[ 1.814302] checking TSC synchronization [CPU#0 -> CPU#15]: passed.
[ 1.834399] Brought up 16 CPUs
[ 1.834463] Total of 16 processors activated (76607.59 BogoMIPS).
[ 1.846664] CPU0 attaching sched-domain:
[ 1.846668] domain 0: span 0,8 level SIBLING
[ 1.846670] groups: 0 (cpu_power = 589) 8 (cpu_power = 589)
[ 1.846675] domain 1: span 0,2,4,6,8,10,12,14 level MC
[ 1.846676] groups: 0,8 (cpu_power = 1178) 2,10 (cpu_power = 1178) 4,12 (cpu_power = 1178) 6,14 (cpu_power = 1178)
[ 1.846683] domain 2: span 0-15 level NODE
[ 1.846685] groups: 0,2,4,6,8,10,12,14 (cpu_power = 4712) 1,3,5,7,9,11,13,15 (cpu_power = 4712)
[ 1.846693] CPU1 attaching sched-domain:
[ 1.846694] domain 0: span 1,9 level SIBLING
[ 1.846696] groups: 1 (cpu_power = 589) 9 (cpu_power = 589)
[ 1.846700] domain 1: span 1,3,5,7,9,11,13,15 level MC
[ 1.846702] groups: 1,9 (cpu_power = 1178) 3,11 (cpu_power = 1178) 5,13 (cpu_power = 1178) 7,15 (cpu_power = 1178)
[ 1.846708] domain 2: span 0-15 level NODE
[ 1.846709] groups: 1,3,5,7,9,11,13,15 (cpu_power = 4712) 0,2,4,6,8,10,12,14 (cpu_power = 4712)
[ 1.846716] CPU2 attaching sched-domain:
[ 1.846717] domain 0: span 2,10 level SIBLING
[ 1.846718] groups: 2 (cpu_power = 589) 10 (cpu_power = 589)
[ 1.846723] domain 1: span 0,2,4,6,8,10,12,14 level MC
[ 1.846724] groups: 2,10 (cpu_power = 1178) 4,12 (cpu_power = 1178) 6,14 (cpu_power = 1178) 0,8 (cpu_power = 1178)
[ 1.846731] domain 2: span 0-15 level NODE
[ 1.846732] groups: 0,2,4,6,8,10,12,14 (cpu_power = 4712) 1,3,5,7,9,11,13,15 (cpu_power = 4712)
[ 1.846738] CPU3 attaching sched-domain:
[ 1.846739] domain 0: span 3,11 level SIBLING
[ 1.846741] groups: 3 (cpu_power = 589) 11 (cpu_power = 589)
[ 1.846745] domain 1: span 1,3,5,7,9,11,13,15 level MC
[ 1.846747] groups: 3,11 (cpu_power = 1178) 5,13 (cpu_power = 1178) 7,15 (cpu_power = 1178) 1,9 (cpu_power = 1178)
[ 1.846753] domain 2: span 0-15 level NODE
[ 1.846755] groups: 1,3,5,7,9,11,13,15 (cpu_power = 4712) 0,2,4,6,8,10,12,14 (cpu_power = 4712)
[ 1.846761] CPU4 attaching sched-domain:
[ 1.846762] domain 0: span 4,12 level SIBLING
[ 1.846764] groups: 4 (cpu_power = 589) 12 (cpu_power = 589)
[ 1.846768] domain 1: span 0,2,4,6,8,10,12,14 level MC
[ 1.846769] groups: 4,12 (cpu_power = 1178) 6,14 (cpu_power = 1178) 0,8 (cpu_power = 1178) 2,10 (cpu_power = 1178)
[ 1.846776] domain 2: span 0-15 level NODE
[ 1.846777] groups: 0,2,4,6,8,10,12,14 (cpu_power = 4712) 1,3,5,7,9,11,13,15 (cpu_power = 4712)
[ 1.846783] CPU5 attaching sched-domain:
[ 1.846784] domain 0: span 5,13 level SIBLING
[ 1.846786] groups: 5 (cpu_power = 589) 13 (cpu_power = 589)
[ 1.846790] domain 1: span 1,3,5,7,9,11,13,15 level MC
[ 1.846792] groups: 5,13 (cpu_power = 1178) 7,15 (cpu_power = 1178) 1,9 (cpu_power = 1178) 3,11 (cpu_power = 1178)
[ 1.846798] domain 2: span 0-15 level NODE
[ 1.846799] groups: 1,3,5,7,9,11,13,15 (cpu_power = 4712) 0,2,4,6,8,10,12,14 (cpu_power = 4712)
[ 1.846806] CPU6 attaching sched-domain:
[ 1.846807] domain 0: span 6,14 level SIBLING
[ 1.846808] groups: 6 (cpu_power = 589) 14 (cpu_power = 589)
[ 1.846813] domain 1: span 0,2,4,6,8,10,12,14 level MC
[ 1.846814] groups: 6,14 (cpu_power = 1178) 0,8 (cpu_power = 1178) 2,10 (cpu_power = 1178) 4,12 (cpu_power = 1178)
[ 1.846821] domain 2: span 0-15 level NODE
[ 1.846822] groups: 0,2,4,6,8,10,12,14 (cpu_power = 4712) 1,3,5,7,9,11,13,15 (cpu_power = 4712)
[ 1.846828] CPU7 attaching sched-domain:
[ 1.846829] domain 0: span 7,15 level SIBLING
[ 1.846831] groups: 7 (cpu_power = 589) 15 (cpu_power = 589)
[ 1.846835] domain 1: span 1,3,5,7,9,11,13,15 level MC
[ 1.846837] groups: 7,15 (cpu_power = 1178) 1,9 (cpu_power = 1178) 3,11 (cpu_power = 1178) 5,13 (cpu_power = 1178)
[ 1.846843] domain 2: span 0-15 level NODE
[ 1.846844] groups: 1,3,5,7,9,11,13,15 (cpu_power = 4712) 0,2,4,6,8,10,12,14 (cpu_power = 4712)
[ 1.846850] CPU8 attaching sched-domain:
[ 1.846852] domain 0: span 0,8 level SIBLING
[ 1.846853] groups: 8 (cpu_power = 589) 0 (cpu_power = 589)
[ 1.846858] domain 1: span 0,2,4,6,8,10,12,14 level MC
[ 1.846859] groups: 0,8 (cpu_power = 1178) 2,10 (cpu_power = 1178) 4,12 (cpu_power = 1178) 6,14 (cpu_power = 1178)
[ 1.846865] domain 2: span 0-15 level NODE
[ 1.846867] groups: 0,2,4,6,8,10,12,14 (cpu_power = 4712) 1,3,5,7,9,11,13,15 (cpu_power = 4712)
[ 1.846873] CPU9 attaching sched-domain:
[ 1.846874] domain 0: span 1,9 level SIBLING
[ 1.846876] groups: 9 (cpu_power = 589) 1 (cpu_power = 589)
[ 1.846880] domain 1: span 1,3,5,7,9,11,13,15 level MC
[ 1.846881] groups: 1,9 (cpu_power = 1178) 3,11 (cpu_power = 1178) 5,13 (cpu_power = 1178) 7,15 (cpu_power = 1178)
[ 1.846888] domain 2: span 0-15 level NODE
[ 1.846889] groups: 1,3,5,7,9,11,13,15 (cpu_power = 4712) 0,2,4,6,8,10,12,14 (cpu_power = 4712)
[ 1.846895] CPU10 attaching sched-domain:
[ 1.846897] domain 0: span 2,10 level SIBLING
[ 1.846898] groups: 10 (cpu_power = 589) 2 (cpu_power = 589)
[ 1.846902] domain 1: span 0,2,4,6,8,10,12,14 level MC
[ 1.846904] groups: 2,10 (cpu_power = 1178) 4,12 (cpu_power = 1178) 6,14 (cpu_power = 1178) 0,8 (cpu_power = 1178)
[ 1.846910] domain 2: span 0-15 level NODE
[ 1.846912] groups: 0,2,4,6,8,10,12,14 (cpu_power = 4712) 1,3,5,7,9,11,13,15 (cpu_power = 4712)
[ 1.846918] CPU11 attaching sched-domain:
[ 1.846919] domain 0: span 3,11 level SIBLING
[ 1.846920] groups: 11 (cpu_power = 589) 3 (cpu_power = 589)
[ 1.846925] domain 1: span 1,3,5,7,9,11,13,15 level MC
[ 1.846927] groups: 3,11 (cpu_power = 1178) 5,13 (cpu_power = 1178) 7,15 (cpu_power = 1178) 1,9 (cpu_power = 1178)
[ 1.846933] domain 2: span 0-15 level NODE
[ 1.846934] groups: 1,3,5,7,9,11,13,15 (cpu_power = 4712) 0,2,4,6,8,10,12,14 (cpu_power = 4712)
[ 1.846940] CPU12 attaching sched-domain:
[ 1.846942] domain 0: span 4,12 level SIBLING
[ 1.846943] groups: 12 (cpu_power = 589) 4 (cpu_power = 589)
[ 1.846948] domain 1: span 0,2,4,6,8,10,12,14 level MC
[ 1.846949] groups: 4,12 (cpu_power = 1178) 6,14 (cpu_power = 1178) 0,8 (cpu_power = 1178) 2,10 (cpu_power = 1178)
[ 1.846955] domain 2: span 0-15 level NODE
[ 1.846957] groups: 0,2,4,6,8,10,12,14 (cpu_power = 4712) 1,3,5,7,9,11,13,15 (cpu_power = 4712)
[ 1.846963] CPU13 attaching sched-domain:
[ 1.846964] domain 0: span 5,13 level SIBLING
[ 1.846966] groups: 13 (cpu_power = 589) 5 (cpu_power = 589)
[ 1.846970] domain 1: span 1,3,5,7,9,11,13,15 level MC
[ 1.846972] groups: 5,13 (cpu_power = 1178) 7,15 (cpu_power = 1178) 1,9 (cpu_power = 1178) 3,11 (cpu_power = 1178)
[ 1.846978] domain 2: span 0-15 level NODE
[ 1.846979] groups: 1,3,5,7,9,11,13,15 (cpu_power = 4712) 0,2,4,6,8,10,12,14 (cpu_power = 4712)
[ 1.846985] CPU14 attaching sched-domain:
[ 1.846987] domain 0: span 6,14 level SIBLING
[ 1.846988] groups: 14 (cpu_power = 589) 6 (cpu_power = 589)
[ 1.846993] domain 1: span 0,2,4,6,8,10,12,14 level MC
[ 1.846994] groups: 6,14 (cpu_power = 1178) 0,8 (cpu_power = 1178) 2,10 (cpu_power = 1178) 4,12 (cpu_power = 1178)
[ 1.847000] domain 2: span 0-15 level NODE
[ 1.847002] groups: 0,2,4,6,8,10,12,14 (cpu_power = 4712) 1,3,5,7,9,11,13,15 (cpu_power = 4712)
[ 1.847008] CPU15 attaching sched-domain:
[ 1.847009] domain 0: span 7,15 level SIBLING
[ 1.847011] groups: 15 (cpu_power = 589) 7 (cpu_power = 589)
[ 1.847015] domain 1: span 1,3,5,7,9,11,13,15 level MC
[ 1.847017] groups: 7,15 (cpu_power = 1178) 1,9 (cpu_power = 1178) 3,11 (cpu_power = 1178) 5,13 (cpu_power = 1178)
[ 1.847023] domain 2: span 0-15 level NODE
[ 1.847024] groups: 1,3,5,7,9,11,13,15 (cpu_power = 4712) 0,2,4,6,8,10,12,14 (cpu_power = 4712)
[ 1.847960] devtmpfs: initialized
[ 1.851591] regulator: core version 0.5
[ 1.851717] NET: Registered protocol family 16
[ 1.851859] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 1.851944] ACPI: bus type pci registered
[ 1.852087] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 1.852157] PCI: MCFG area at e0000000 reserved in E820
[ 1.857134] PCI: Using MMCONFIG at e0000000 - efffffff
[ 1.857200] PCI: Using configuration type 1 for base access
[ 1.857926] bio: create slab <bio-0> at 0
[ 1.858704] ACPI: EC: Look up EC in DSDT
[ 1.861192] ACPI: BIOS _OSI(Linux) query ignored
[ 1.861378] ACPI: Interpreter enabled
[ 1.861443] ACPI: (supports S0 S4 S5)
[ 1.861644] ACPI: Using IOAPIC for interrupt routing
[ 1.865719] ACPI: No dock devices found.
[ 1.866125] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 1.866260] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 1.866330] pci 0000:00:00.0: PME# disabled
[ 1.866450] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.866519] pci 0000:00:01.0: PME# disabled
[ 1.866637] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 1.866706] pci 0000:00:03.0: PME# disabled
[ 1.866826] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 1.866895] pci 0000:00:07.0: PME# disabled
[ 1.867134] pci 0000:00:1a.0: reg 20 io port: [0xec40-0xec5f]
[ 1.867197] pci 0000:00:1a.1: reg 20 io port: [0xec60-0xec7f]
[ 1.867263] pci 0000:00:1a.7: reg 10 32bit mmio: [0xdf0ff800-0xdf0ffbff]
[ 1.867312] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 1.867382] pci 0000:00:1a.7: PME# disabled
[ 1.867491] pci 0000:00:1d.0: reg 20 io port: [0xec80-0xec9f]
[ 1.867553] pci 0000:00:1d.1: reg 20 io port: [0xeca0-0xecbf]
[ 1.867614] pci 0000:00:1d.2: reg 20 io port: [0xecc0-0xecdf]
[ 1.867675] pci 0000:00:1d.3: reg 20 io port: [0xece0-0xecff]
[ 1.867739] pci 0000:00:1d.7: reg 10 32bit mmio: [0xdf0ffc00-0xdf0fffff]
[ 1.867788] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 1.867858] pci 0000:00:1d.7: PME# disabled
[ 1.868033] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 1.868119] pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
[ 1.868189] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f)
[ 1.868275] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f)
[ 1.868360] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 00e0 (mask 000f)
[ 1.868489] pci 0000:00:1f.2: reg 10 io port: [0xe8e0-0xe8e7]
[ 1.868494] pci 0000:00:1f.2: reg 14 io port: [0xe8d0-0xe8d3]
[ 1.868499] pci 0000:00:1f.2: reg 18 io port: [0xe8e8-0xe8ef]
[ 1.868504] pci 0000:00:1f.2: reg 1c io port: [0xe8d4-0xe8d7]
[ 1.868508] pci 0000:00:1f.2: reg 20 io port: [0xec00-0xec0f]
[ 1.868513] pci 0000:00:1f.2: reg 24 io port: [0xec10-0xec1f]
[ 1.868563] pci 0000:00:1f.5: reg 10 io port: [0xe8f0-0xe8f7]
[ 1.868568] pci 0000:00:1f.5: reg 14 io port: [0xe8d8-0xe8db]
[ 1.868573] pci 0000:00:1f.5: reg 18 io port: [0xe8f8-0xe8ff]
[ 1.868577] pci 0000:00:1f.5: reg 1c io port: [0xe8dc-0xe8df]
[ 1.868582] pci 0000:00:1f.5: reg 20 io port: [0xec20-0xec2f]
[ 1.868587] pci 0000:00:1f.5: reg 24 io port: [0xec30-0xec3f]
[ 1.868653] pci 0000:01:00.0: reg 10 64bit mmio: [0xda000000-0xdbffffff]
[ 1.868699] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 1.868768] pci 0000:01:00.0: PME# disabled
[ 1.868878] pci 0000:01:00.1: reg 10 64bit mmio: [0xdc000000-0xddffffff]
[ 1.868924] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
[ 1.868995] pci 0000:01:00.1: PME# disabled
[ 1.869112] pci 0000:00:01.0: bridge 32bit mmio: [0xda000000-0xddffffff]
[ 1.869158] pci 0000:03:00.0: reg 10 io port: [0xfc00-0xfcff]
[ 1.869166] pci 0000:03:00.0: reg 14 64bit mmio: [0xdf2b0000-0xdf2bffff]
[ 1.869173] pci 0000:03:00.0: reg 1c 64bit mmio: [0xdf2c0000-0xdf2fffff]
[ 1.869180] pci 0000:03:00.0: reg 30 32bit mmio pref: [0xdf100000-0xdf1fffff]
[ 1.869198] pci 0000:03:00.0: supports D1 D2
[ 1.869225] pci 0000:00:07.0: bridge io port: [0xf000-0xffff]
[ 1.869228] pci 0000:00:07.0: bridge 32bit mmio: [0xdf100000-0xdf2fffff]
[ 1.869264] pci 0000:04:03.0: reg 10 32bit mmio pref: [0xd9800000-0xd9ffffff]
[ 1.869270] pci 0000:04:03.0: reg 14 32bit mmio: [0xde7fc000-0xde7fffff]
[ 1.869276] pci 0000:04:03.0: reg 18 32bit mmio: [0xde800000-0xdeffffff]
[ 1.869294] pci 0000:04:03.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
[ 1.869357] pci 0000:00:1e.0: transparent bridge
[ 1.869425] pci 0000:00:1e.0: bridge 32bit mmio: [0xde000000-0xdeffffff]
[ 1.869430] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xd9800000-0xd9ffffff]
[ 1.869446] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.869883] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 1.869968] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 1.870050] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]
[ 1.870139] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT]
[ 1.872229] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 14 *15)
[ 1.872864] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 *14 15)
[ 1.873502] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 1.874132] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 1.874763] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 1.875393] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 *6 7 10 11 14 15)
[ 1.876023] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 1.876654] ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 *14 15)
[ 1.877273] vgaarb: device added: PCI:0000:04:03.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.877363] vgaarb: loaded
[ 1.877472] PCI: Using ACPI for IRQ routing
[ 1.877692] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 1.877972] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 1.914284] Switching to clocksource tsc
[ 1.916466] pnp: PnP ACPI init
[ 1.916555] ACPI: bus type pnp registered
[ 1.921561] pnp: PnP ACPI: found 12 devices
[ 1.921629] ACPI: ACPI bus type pnp unregistered
[ 1.921711] system 00:07: ioport range 0x800-0x87f has been reserved
[ 1.921783] system 00:07: ioport range 0x880-0x8ff could not be reserved
[ 1.921855] system 00:07: ioport range 0x900-0x91f has been reserved
[ 1.921930] system 00:07: ioport range 0x920-0x923 has been reserved
[ 1.922001] system 00:07: ioport range 0x924-0x924 has been reserved
[ 1.922073] system 00:07: ioport range 0xc00-0xc7f has been reserved
[ 1.922145] system 00:07: ioport range 0xca0-0xca7 has been reserved
[ 1.922216] system 00:07: ioport range 0xca9-0xcab has been reserved
[ 1.922288] system 00:07: ioport range 0xcad-0xcaf has been reserved
[ 1.922364] system 00:08: ioport range 0xca8-0xca8 has been reserved
[ 1.922440] system 00:08: ioport range 0xcac-0xcac has been reserved
[ 1.922515] system 00:09: iomem range 0xe0000000-0xefffffff has been reserved
[ 1.922591] system 00:0b: iomem range 0xfed90000-0xfed91fff has been reserved
[ 1.927699] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 1.927770] pci 0000:00:01.0: IO window: disabled
[ 1.927841] pci 0000:00:01.0: MEM window: 0xda000000-0xddffffff
[ 1.927913] pci 0000:00:01.0: PREFETCH window: disabled
[ 1.927986] pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
[ 1.928056] pci 0000:00:03.0: IO window: disabled
[ 1.928126] pci 0000:00:03.0: MEM window: disabled
[ 1.928196] pci 0000:00:03.0: PREFETCH window: disabled
[ 1.928268] pci 0000:00:07.0: PCI bridge, secondary bus 0000:03
[ 1.928339] pci 0000:00:07.0: IO window: 0xf000-0xffff
[ 1.928410] pci 0000:00:07.0: MEM window: 0xdf100000-0xdf2fffff
[ 1.928482] pci 0000:00:07.0: PREFETCH window: disabled
[ 1.928556] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 1.928626] pci 0000:00:1e.0: IO window: disabled
[ 1.928697] pci 0000:00:1e.0: MEM window: 0xde000000-0xdeffffff
[ 1.928770] pci 0000:00:1e.0: PREFETCH window: 0x000000d9800000-0x000000d9ffffff
[ 1.928868] alloc irq_desc for 53 on node -1
[ 1.928871] alloc kstat_irqs on node -1
[ 1.928878] pci 0000:00:01.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
[ 1.928952] pci 0000:00:01.0: setting latency timer to 64
[ 1.928960] pci 0000:00:03.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
[ 1.929033] pci 0000:00:03.0: setting latency timer to 64
[ 1.929041] pci 0000:00:07.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
[ 1.929115] pci 0000:00:07.0: setting latency timer to 64
[ 1.929121] pci 0000:00:1e.0: setting latency timer to 64
[ 1.929126] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 1.929129] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 1.929132] pci_bus 0000:01: resource 1 mem: [0xda000000-0xddffffff]
[ 1.929135] pci_bus 0000:03: resource 0 io: [0xf000-0xffff]
[ 1.929138] pci_bus 0000:03: resource 1 mem: [0xdf100000-0xdf2fffff]
[ 1.929141] pci_bus 0000:04: resource 1 mem: [0xde000000-0xdeffffff]
[ 1.929144] pci_bus 0000:04: resource 2 pref mem [0xd9800000-0xd9ffffff]
[ 1.929147] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
[ 1.929149] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 1.929196] NET: Registered protocol family 2
[ 1.929482] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.930739] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.932873] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.933156] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.933227] TCP reno registered
[ 1.933533] NET: Registered protocol family 1
[ 1.950829] pci 0000:04:03.0: Boot video device
[ 1.950874] Unpacking initramfs...
[ 2.218281] Freeing initrd memory: 7567k freed
[ 2.221245] audit: initializing netlink socket (disabled)
[ 2.221324] type=2000 audit(1306951098.872:1): initialized
[ 2.225892] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.227810] VFS: Disk quotas dquot_6.5.2
[ 2.227938] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.228108] msgmni has been set to 7905
[ 2.228733] alg: No test for stdrng (krng)
[ 2.228855] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 2.228943] io scheduler noop registered
[ 2.229009] io scheduler anticipatory registered
[ 2.229077] io scheduler deadline registered
[ 2.229181] io scheduler cfq registered (default)
[ 2.229381] alloc irq_desc for 56 on node -1
[ 2.229384] alloc kstat_irqs on node -1
[ 2.229394] pcieport 0000:00:01.0: irq 56 for MSI/MSI-X
[ 2.229402] pcieport 0000:00:01.0: setting latency timer to 64
[ 2.229513] alloc irq_desc for 57 on node -1
[ 2.229516] alloc kstat_irqs on node -1
[ 2.229523] pcieport 0000:00:03.0: irq 57 for MSI/MSI-X
[ 2.229530] pcieport 0000:00:03.0: setting latency timer to 64
[ 2.229637] alloc irq_desc for 58 on node -1
[ 2.229639] alloc kstat_irqs on node -1
[ 2.229646] pcieport 0000:00:07.0: irq 58 for MSI/MSI-X
[ 2.229653] pcieport 0000:00:07.0: setting latency timer to 64
[ 2.230074] aer 0000:00:01.0:pcie02: service driver aer loaded
[ 2.230112] aer 0000:00:03.0:pcie02: service driver aer loaded
[ 2.230147] aer 0000:00:07.0:pcie02: service driver aer loaded
[ 2.231649] Linux agpgart interface v0.103
[ 2.231754] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.231921] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.232092] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.232417] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.232621] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.232907] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 2.233054] PNP: No PS/2 controller found. Probing ports directly.
[ 2.235804] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.240912] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.241071] mice: PS/2 mouse device common for all mice
[ 2.241178] rtc_cmos 00:04: RTC can wake from S4
[ 2.241286] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 2.241389] rtc0: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 2.241469] cpuidle: using governor ladder
[ 2.241535] cpuidle: using governor menu
[ 2.241603] No iBFT detected.
[ 2.242058] TCP cubic registered
[ 2.242256] NET: Registered protocol family 10
[ 2.243003] lo: Disabled Privacy Extensions
[ 2.243351] Mobile IPv6
[ 2.243415] NET: Registered protocol family 17
[ 2.243566] PM: Resume from disk failed.
[ 2.243576] registered taskstats version 1
[ 2.244181] rtc_cmos 00:04: setting system clock to 2011-06-01 17:58:19 UTC (1306951099)
[ 2.244295] Initalizing network drop monitor service
[ 2.244416] Freeing unused kernel memory: 584k freed
[ 2.244621] Write protecting the kernel read-only data: 4204k
[ 2.262105] udevd version 125 started
[ 2.381849] Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.2 (Aug 21, 2009)
[ 2.381956] alloc irq_desc for 36 on node -1
[ 2.381959] alloc kstat_irqs on node -1
[ 2.381968] bnx2 0000:01:00.0: PCI INT A -> GSI 36 (level, low) -> IRQ 36
[ 2.382044] bnx2 0000:01:00.0: setting latency timer to 64
[ 2.382179] bnx2 0000:01:00.0: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw
[ 2.407818] SCSI subsystem initialized
[ 2.423251] usbcore: registered new interface driver usbfs
[ 2.423345] usbcore: registered new interface driver hub
[ 2.423451] usbcore: registered new device driver usb
[ 2.447184] libata version 3.00 loaded.
[ 2.450657] mpt2sas version 02.100.03.00 loaded
[ 2.450817] scsi0 : Fusion MPT SAS Host
[ 2.451085] alloc irq_desc for 38 on node -1
[ 2.451088] alloc kstat_irqs on node -1
[ 2.451097] mpt2sas 0000:03:00.0: PCI INT A -> GSI 38 (level, low) -> IRQ 38
[ 2.451175] mpt2sas 0000:03:00.0: setting latency timer to 64
[ 2.451179] mpt2sas0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (4048328 kB)
[ 2.451355] alloc irq_desc for 59 on node -1
[ 2.451356] alloc kstat_irqs on node -1
[ 2.451362] mpt2sas 0000:03:00.0: irq 59 for MSI/MSI-X
[ 2.451381] mpt2sas0: PCI-MSI-X enabled: IRQ 59
[ 2.451449] mpt2sas0: iomem(0xdf2b0000), mapped(0xffffc900111c0000), size(65536)
[ 2.451536] mpt2sas0: ioport(0xfc00), size(256)
[ 2.451603] mpt2sas0: sending diag reset !!
[ 2.452661] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.452753] alloc irq_desc for 19 on node -1
[ 2.452755] alloc kstat_irqs on node -1
[ 2.452762] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 2.452863] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 2.452867] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 2.452956] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 2.453068] ehci_hcd 0000:00:1a.7: debug port 1
[ 2.454326] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.457025] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 2.457040] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xdf0ff800
[ 2.470452] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 2.470542] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.470614] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.470709] usb usb1: Product: EHCI Host Controller
[ 2.470777] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 2.470848] usb usb1: SerialNumber: 0000:00:1a.7
[ 2.470983] usb usb1: configuration #1 chosen from 1 choice
[ 2.471080] hub 1-0:1.0: USB hub found
[ 2.471150] hub 1-0:1.0: 4 ports detected
[ 2.471274] alloc irq_desc for 17 on node -1
[ 2.471277] alloc kstat_irqs on node -1
[ 2.471284] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.471364] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2.471367] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 2.471461] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
[ 2.471579] uhci_hcd 0000:00:1a.0: irq 17, io base 0x0000ec40
[ 2.471681] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.471754] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.471840] usb usb2: Product: UHCI Host Controller
[ 2.471908] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 2.471979] usb usb2: SerialNumber: 0000:00:1a.0
[ 2.472109] usb usb2: configuration #1 chosen from 1 choice
[ 2.472205] hub 2-0:1.0: USB hub found
[ 2.472275] hub 2-0:1.0: 2 ports detected
[ 2.472395] ata_piix 0000:00:1f.2: version 2.13
[ 2.472409] alloc irq_desc for 23 on node -1
[ 2.472411] alloc kstat_irqs on node -1
[ 2.472419] ata_piix 0000:00:1f.2: PCI INT C -> GSI 23 (level, low) -> IRQ 23
[ 2.472496] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 2.472821] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 2.472889] scsi1 : ata_piix
[ 2.473026] scsi2 : ata_piix
[ 2.473132] ata1: SATA max UDMA/133 cmd 0xe8e0 ctl 0xe8d0 bmdma 0xec00 irq 23
[ 2.473207] ata2: SATA max UDMA/133 cmd 0xe8e8 ctl 0xe8d4 bmdma 0xec08 irq 23
[ 2.473305] alloc irq_desc for 21 on node -1
[ 2.473307] alloc kstat_irqs on node -1
[ 2.473314] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 2.473426] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.473430] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.473515] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3
[ 2.473625] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.477558] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 2.477573] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xdf0ffc00
[ 2.490416] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.490501] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.490573] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.490660] usb usb3: Product: EHCI Host Controller
[ 2.490728] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 2.490798] usb usb3: SerialNumber: 0000:00:1d.7
[ 2.490926] usb usb3: configuration #1 chosen from 1 choice
[ 2.491022] hub 3-0:1.0: USB hub found
[ 2.491092] hub 3-0:1.0: 4 ports detected
[ 2.491212] alloc irq_desc for 18 on node -1
[ 2.491214] alloc kstat_irqs on node -1
[ 2.491220] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 2.491298] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 2.491302] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 2.491378] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 2.491495] uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000ec60
[ 2.491595] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.491667] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.491754] usb usb4: Product: UHCI Host Controller
[ 2.491822] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 2.491892] usb usb4: SerialNumber: 0000:00:1a.1
[ 2.492016] usb usb4: configuration #1 chosen from 1 choice
[ 2.492114] hub 4-0:1.0: USB hub found
[ 2.492184] hub 4-0:1.0: 2 ports detected
[ 2.492306] alloc irq_desc for 22 on node -1
[ 2.492308] alloc kstat_irqs on node -1
[ 2.492315] ata_piix 0000:00:1f.5: PCI INT D -> GSI 22 (level, low) -> IRQ 22
[ 2.492390] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 2.535491] bnx2 0000:01:00.0: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j3.fw
[ 2.577858] eth0: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem da000000, IRQ 36, node addr 84:2b:2b:13:89:b7
[ 2.577978] alloc irq_desc for 48 on node -1
[ 2.577981] alloc kstat_irqs on node -1
[ 2.577989] bnx2 0000:01:00.1: PCI INT B -> GSI 48 (level, low) -> IRQ 48
[ 2.578066] bnx2 0000:01:00.1: setting latency timer to 64
[ 2.578191] bnx2 0000:01:00.1: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw
[ 2.579841] bnx2 0000:01:00.1: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j3.fw
[ 2.581946] eth1: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem dc000000, IRQ 48, node addr 84:2b:2b:13:89:b8
[ 2.649842] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 2.649907] scsi3 : ata_piix
[ 2.650037] scsi4 : ata_piix
[ 2.650141] ata3: SATA max UDMA/133 cmd 0xe8f0 ctl 0xe8d8 bmdma 0xec20 irq 22
[ 2.650216] ata4: SATA max UDMA/133 cmd 0xe8f8 ctl 0xe8dc bmdma 0xec28 irq 22
[ 2.650325] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 2.650410] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.650414] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.650490] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 2.650600] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ec80
[ 2.650700] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.650772] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.650859] usb usb5: Product: UHCI Host Controller
[ 2.650927] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 2.650997] usb usb5: SerialNumber: 0000:00:1d.0
[ 2.651125] usb usb5: configuration #1 chosen from 1 choice
[ 2.651220] hub 5-0:1.0: USB hub found
[ 2.651290] hub 5-0:1.0: 2 ports detected
[ 2.651401] alloc irq_desc for 20 on node -1
[ 2.651404] alloc kstat_irqs on node -1
[ 2.651410] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 2.651487] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.651490] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.651565] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 2.651680] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000eca0
[ 2.651779] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.651851] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.651938] usb usb6: Product: UHCI Host Controller
[ 2.652005] usb usb6: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 2.652076] usb usb6: SerialNumber: 0000:00:1d.1
[ 2.652199] usb usb6: configuration #1 chosen from 1 choice
[ 2.652294] hub 6-0:1.0: USB hub found
[ 2.652363] hub 6-0:1.0: 2 ports detected
[ 2.652474] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 2.652551] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.652554] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.652628] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 2.652737] uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000ecc0
[ 2.652837] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.652909] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.652996] usb usb7: Product: UHCI Host Controller
[ 2.653064] usb usb7: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 2.653134] usb usb7: SerialNumber: 0000:00:1d.2
[ 2.653254] usb usb7: configuration #1 chosen from 1 choice
[ 2.653352] hub 7-0:1.0: USB hub found
[ 2.653421] hub 7-0:1.0: 2 ports detected
[ 2.653530] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 20 (level, low) -> IRQ 20
[ 2.653607] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.653610] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.653684] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[ 2.653792] uhci_hcd 0000:00:1d.3: irq 20, io base 0x0000ece0
[ 2.653893] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.653965] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.654051] usb usb8: Product: UHCI Host Controller
[ 2.654119] usb usb8: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 2.654189] usb usb8: SerialNumber: 0000:00:1d.3
[ 2.659347] usb usb8: configuration #1 chosen from 1 choice
[ 2.659442] hub 8-0:1.0: USB hub found
[ 2.659512] hub 8-0:1.0: 2 ports detected
[ 2.781225] usb 1-3: new high speed USB device using ehci_hcd and address 2
[ 2.913370] usb 1-3: New USB device found, idVendor=0424, idProduct=2514
[ 2.913444] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.913598] usb 1-3: configuration #1 chosen from 1 choice
[ 2.913770] hub 1-3:1.0: USB hub found
[ 2.913864] hub 1-3:1.0: 4 ports detected
[ 3.088240] ata4: SATA link down (SStatus 4 SControl 0)
[ 3.123422] ata1.00: SATA link down (SStatus 0 SControl 300)
[ 3.123505] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 3.134174] ata2.00: SATA link down (SStatus 0 SControl 300)
[ 3.134256] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 3.244455] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.264385] usb 5-2: new full speed USB device using uhci_hcd and address 2
[ 3.268602] ata3.00: ATAPI: TSSTcorp DVD+/-RW TS-L633C, D250, max UDMA/100
[ 3.268689] ata3.00: applying bridge limits
[ 3.300568] ata3.00: configured for UDMA/100
[ 3.308084] scsi 3:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L633C D250 PQ: 0 ANSI: 5
[ 3.349876] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.349967] Uniform CD-ROM driver Revision: 3.20
[ 3.350140] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 3.357935] sr 3:0:0:0: Attached scsi generic sg0 type 5
[ 3.435349] usb 5-2: New USB device found, idVendor=0624, idProduct=0248
[ 3.435423] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.435496] usb 5-2: Product: USB Composite Device-0
[ 3.435564] usb 5-2: Manufacturer: Avocent
[ 3.435631] usb 5-2: SerialNumber: 20080519
[ 3.435763] usb 5-2: configuration #1 chosen from 1 choice
[ 3.465263] usbcore: registered new interface driver hiddev
[ 3.470468] input: Avocent USB Composite Device-0 as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input1
[ 3.470603] generic-usb 0003:0624:0248.0001: input,hidraw0: USB HID v1.00 Keyboard [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2/input0
[ 3.473422] input: Avocent USB Composite Device-0 as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.1/input/input2
[ 3.473572] generic-usb 0003:0624:0248.0002: input,hidraw1: USB HID v1.00 Mouse [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2/input1
[ 3.473686] usbcore: registered new interface driver usbhid
[ 3.473756] usbhid: v2.6:USB HID core driver
[ 3.659694] mpt2sas0: diag reset: SUCCESS
[ 4.095192] mpt2sas0: Allocated physical memory: size(1091 kB)
[ 4.095263] mpt2sas0: Current Controller Queue Depth(467), Max Controller Queue Depth(3439)
[ 4.095351] mpt2sas0: Scatter Gather Elements per IO(128)
[ 4.327848] mpt2sas0: LSISAS2008: FWVersion(02.15.63.00), ChipRevision(0x02), BiosVersion(07.01.09.00)
[ 4.327942] mpt2sas0: Dell PERC H200 Adapter: Vendor(0x1000), Device(0x0072), SSVID(0x1028), SSDID(0x1F1D)
[ 4.328033] mpt2sas0: Protocol=(Initiator,Target), Capabilities=(Raid,TLR,EEDP,Snapshot Buffer,Diag Trace Buffer,Task Set Full,NCQ)
[ 4.328703] mpt2sas0: sending port enable !!
[ 6.017032] mpt2sas0: host_add: handle(0x0001), sas_addr(0x5a4badb052563800), phys(8)
[ 6.017334] mpt2sas0: failure at /root/build/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/scsi/mpt2sas/mpt2sas_scsih.c:3801/_scsih_add_device()!
[ 11.255679] mpt2sas0: port enable: SUCCESS
[ 11.255954] scsi 0:1:0:0: Direct-Access Dell Virtual Disk 1028 PQ: 0 ANSI: 6
[ 11.256302] scsi 0:1:0:0: RAID1: handle(0x004f), wwid(0x04561af31bc53dfb), pd_count(2), type(SSP)
[ 11.256394] scsi 0:1:0:0: qdepth(128), tagged(1), simple(1), ordered(0), scsi_level(7), cmd_que(1)
[ 11.256586] scsi 0:1:0:0: Attached scsi generic sg1 type 0
[ 11.257779] scsi 0:0:0:0: Direct-Access HITACHI HUS153014VLS300 A598 PQ: 0 ANSI: 5
[ 11.258034] scsi 0:0:0:0: SSP: handle(0x000a), sas_addr(0x5000cca0113e5cd5), device_name(0x0000000000000000)
[ 11.258126] scsi 0:0:0:0: SSP: enclosure_logical_id(0x5a4badb052563800), slot(1)
[ 11.258214] scsi 0:0:0:0: qdepth(254), tagged(1), simple(1), ordered(0), scsi_level(6), cmd_que(1)
[ 11.259088] scsi 0:0:0:0: Attached scsi generic sg2 type 0
[ 11.260730] scsi 0:0:1:0: Direct-Access HITACHI HUS153014VLS300 A598 PQ: 0 ANSI: 5
[ 11.260989] scsi 0:0:1:0: SSP: handle(0x000b), sas_addr(0x5000cca011414a1d), device_name(0x0000000000000000)
[ 11.261094] scsi 0:0:1:0: SSP: enclosure_logical_id(0x5a4badb052563800), slot(0)
[ 11.261203] scsi 0:0:1:0: qdepth(254), tagged(1), simple(1), ordered(0), scsi_level(6), cmd_que(1)
[ 11.262082] scsi 0:0:1:0: Attached scsi generic sg3 type 0
[ 11.283628] sd 0:1:0:0: [sda] 285474816 512-byte logical blocks: (146 GB/136 GiB)
[ 11.283814] sd 0:1:0:0: [sda] Write Protect is off
[ 11.283884] sd 0:1:0:0: [sda] Mode Sense: 03 00 00 08
[ 11.283942] sd 0:1:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 11.284266] sda: sda1 sda2
[ 11.291123] sd 0:1:0:0: [sda] Attached SCSI disk
[ 11.536739] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 11.536813] EXT3-fs: write access will be enabled during recovery.
[ 12.439929] kjournald starting. Commit interval 5 seconds
[ 12.439938] EXT3-fs: sda2: orphan cleanup on readonly fs
[ 12.453773] ext3_orphan_cleanup: deleting unreferenced inode 13795592
[ 12.465837] ext3_orphan_cleanup: deleting unreferenced inode 7721284
[ 12.465849] ext3_orphan_cleanup: deleting unreferenced inode 12189703
[ 12.465857] ext3_orphan_cleanup: deleting unreferenced inode 12189702
[ 12.465862] ext3_orphan_cleanup: deleting unreferenced inode 12189701
[ 12.465868] ext3_orphan_cleanup: deleting unreferenced inode 12189700
[ 12.465874] ext3_orphan_cleanup: deleting unreferenced inode 12189699
[ 12.465879] EXT3-fs: sda2: 7 orphan inodes deleted
[ 12.465949] EXT3-fs: recovery complete.
[ 12.546250] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.207512] udevd version 125 started
[ 13.554486] Monitor-Mwait will be used to enter C-1 state
[ 13.602387] Monitor-Mwait will be used to enter C-3 state
[ 13.602521] processor LNXCPU:00: registered as cooling_device0
[ 13.642491] processor LNXCPU:01: registered as cooling_device1
[ 13.644926] processor LNXCPU:02: registered as cooling_device2
[ 13.659139] processor LNXCPU:03: registered as cooling_device3
[ 13.659311] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 13.659408] ACPI: Power Button [PWRF]
[ 13.669352] ACPI Error: SMBus or IPMI write requires Buffer of length 42, found length 20 (20090903/exfield-286)
[ 13.669548] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._GHL] (Node ffff88012fc0ec00), AE_AML_BUFFER_LIMIT
[ 13.669815] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._PMC] (Node ffff88012fc0eb80), AE_AML_BUFFER_LIMIT
[ 13.670083] ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMC (20090903/power_meter-772)
[ 13.687509] processor LNXCPU:04: registered as cooling_device4
[ 13.714636] processor LNXCPU:05: registered as cooling_device5
[ 13.754610] processor LNXCPU:06: registered as cooling_device6
[ 13.805111] processor LNXCPU:07: registered as cooling_device7
[ 13.821949] processor LNXCPU:08: registered as cooling_device8
[ 13.822685] processor LNXCPU:09: registered as cooling_device9
[ 13.826969] processor LNXCPU:0a: registered as cooling_device10
[ 13.827852] processor LNXCPU:0b: registered as cooling_device11
[ 13.838375] processor LNXCPU:0c: registered as cooling_device12
[ 13.841899] processor LNXCPU:0d: registered as cooling_device13
[ 13.842742] processor LNXCPU:0e: registered as cooling_device14
[ 13.843696] processor LNXCPU:0f: registered as cooling_device15
[ 13.907441] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 13.970241] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 13.988046] Error: Driver 'pcspkr' is already registered, aborting...
[ 14.791462] Adding 4112600k swap on /dev/sda1. Priority:-1 extents:1 across:4112600k
[ 664.707093] EXT3 FS on sda2, internal journal
[ 665.765549] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
[ 665.765638] All bugs added by David S. Miller <davem@redhat.com>
[ 666.516360] alloc irq_desc for 60 on node -1
[ 666.516363] alloc kstat_irqs on node -1
[ 666.516372] bnx2 0000:01:00.0: irq 60 for MSI/MSI-X
[ 666.516374] alloc irq_desc for 61 on node -1
[ 666.516376] alloc kstat_irqs on node -1
[ 666.516379] bnx2 0000:01:00.0: irq 61 for MSI/MSI-X
[ 666.516382] alloc irq_desc for 62 on node -1
[ 666.516384] alloc kstat_irqs on node -1
[ 666.516387] bnx2 0000:01:00.0: irq 62 for MSI/MSI-X
[ 666.516389] alloc irq_desc for 63 on node -1
[ 666.516391] alloc kstat_irqs on node -1
[ 666.516395] bnx2 0000:01:00.0: irq 63 for MSI/MSI-X
[ 666.516397] alloc irq_desc for 64 on node -1
[ 666.516398] alloc kstat_irqs on node -1
[ 666.516402] bnx2 0000:01:00.0: irq 64 for MSI/MSI-X
[ 666.516404] alloc irq_desc for 65 on node -1
[ 666.516406] alloc kstat_irqs on node -1
[ 666.516409] bnx2 0000:01:00.0: irq 65 for MSI/MSI-X
[ 666.516411] alloc irq_desc for 66 on node -1
[ 666.516413] alloc kstat_irqs on node -1
[ 666.516417] bnx2 0000:01:00.0: irq 66 for MSI/MSI-X
[ 666.516419] alloc irq_desc for 67 on node -1
[ 666.516421] alloc kstat_irqs on node -1
[ 666.516424] bnx2 0000:01:00.0: irq 67 for MSI/MSI-X
[ 666.516426] alloc irq_desc for 68 on node -1
[ 666.516428] alloc kstat_irqs on node -1
[ 666.516432] bnx2 0000:01:00.0: irq 68 for MSI/MSI-X
[ 666.576113] bnx2: eth0: using MSIX
[ 666.576851] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 666.864442] alloc irq_desc for 69 on node -1
[ 666.864446] alloc kstat_irqs on node -1
[ 666.864454] bnx2 0000:01:00.1: irq 69 for MSI/MSI-X
[ 666.864457] alloc irq_desc for 70 on node -1
[ 666.864459] alloc kstat_irqs on node -1
[ 666.864462] bnx2 0000:01:00.1: irq 70 for MSI/MSI-X
[ 666.864464] alloc irq_desc for 71 on node -1
[ 666.864466] alloc kstat_irqs on node -1
[ 666.864470] bnx2 0000:01:00.1: irq 71 for MSI/MSI-X
[ 666.864472] alloc irq_desc for 72 on node -1
[ 666.864474] alloc kstat_irqs on node -1
[ 666.864477] bnx2 0000:01:00.1: irq 72 for MSI/MSI-X
[ 666.864479] alloc irq_desc for 73 on node -1
[ 666.864481] alloc kstat_irqs on node -1
[ 666.864485] bnx2 0000:01:00.1: irq 73 for MSI/MSI-X
[ 666.864487] alloc irq_desc for 74 on node -1
[ 666.864489] alloc kstat_irqs on node -1
[ 666.864493] bnx2 0000:01:00.1: irq 74 for MSI/MSI-X
[ 666.864495] alloc irq_desc for 75 on node -1
[ 666.864497] alloc kstat_irqs on node -1
[ 666.864500] bnx2 0000:01:00.1: irq 75 for MSI/MSI-X
[ 666.864502] alloc irq_desc for 76 on node -1
[ 666.864504] alloc kstat_irqs on node -1
[ 666.864508] bnx2 0000:01:00.1: irq 76 for MSI/MSI-X
[ 666.864510] alloc irq_desc for 77 on node -1
[ 666.864512] alloc kstat_irqs on node -1
[ 666.864515] bnx2 0000:01:00.1: irq 77 for MSI/MSI-X
[ 666.927948] bnx2: eth1: using MSIX
[ 666.928697] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 669.727559] bnx2: eth0 NIC Copper Link is Up, 1000 Mbps full duplex
[ 669.728433] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 670.122560] bnx2: eth1 NIC Copper Link is Up, 1000 Mbps full duplex
[ 670.123448] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 673.680340] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
[ 680.145785] eth1: no IPv6 routers present
[ 680.477198] eth0: no IPv6 routers present
[ 707.687061] RPC: Registered udp transport module.
[ 707.687137] RPC: Registered tcp transport module.
[ 707.687205] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 707.708821] Slow work thread pool: Starting up
[ 707.709015] Slow work thread pool: Ready
[ 707.709147] FS-Cache: Loaded
[ 707.732628] FS-Cache: Netfs 'nfs' registered for caching
[ 707.736099] svc: failed to register lockdv1 RPC service (errno 97).
[ 1036.620559] svc: failed to register lockdv1 RPC service (errno 97).
[ 1411.330050] svc: failed to register lockdv1 RPC service (errno 97).
[ 1789.230059] svc: failed to register lockdv1 RPC service (errno 97).
[ 2161.353600] svc: failed to register lockdv1 RPC service (errno 97).
[ 2537.210874] svc: failed to register lockdv1 RPC service (errno 97).
[ 2909.292877] svc: failed to register lockdv1 RPC service (errno 97).
[ 3285.849791] svc: failed to register lockdv1 RPC service (errno 97).
[ 3658.933852] svc: failed to register lockdv1 RPC service (errno 97).
next reply other threads:[~2011-06-01 19:07 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-01 19:07 Christian Kujau [this message]
[not found] ` <BANLkTin8Jb-BWDmZbF_cLTk3rjVU9KQu9A@mail.gmail.com>
2011-06-01 23:24 ` 2.6.32: Attempted to kill the idle task? Christian Kujau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4DE68DD5.4080702@nerdbynature.de \
--to=lists@nerdbynature.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox