From: Tao Ma <tm@tao.ma>
To: Vivek Goyal <vgoyal@redhat.com>
Cc: linux-kernel@vger.kernel.org, Jens Axboe <axboe@kernel.dk>
Subject: Re: CFQ: async queue blocks the whole system
Date: Mon, 13 Jun 2011 18:08:40 +0800 [thread overview]
Message-ID: <4DF5E1A8.7080100@tao.ma> (raw)
In-Reply-To: <20110610154414.GA31853@redhat.com>
On 06/10/2011 11:44 PM, Vivek Goyal wrote:
> On Fri, Jun 10, 2011 at 06:00:37PM +0800, Tao Ma wrote:
>> On 06/10/2011 05:14 PM, Vivek Goyal wrote:
>>> On Fri, Jun 10, 2011 at 01:48:37PM +0800, Tao Ma wrote:
>>>
>>> [..]
>>>>>> btw, reverting the patch doesn't work. I can still get the livelock.
>>>
>>> What test exactly you are running. I am primarily interested in whether
>>> you still get the hung task timeout warning where a writer is waiting on
>>> get_request_wait() for more than 120 secods or not.
>>>
>>> Livelock might be a different problem and for which Christoph provided
>>> a patch for XFS.
>>>
>>>>>
>>>>> Can you give following patch a try and see if it helps. On my system this
>>>>> does allow CFQ to dispatch some writes once in a while.
>>>> Sorry, this patch doesn't work in my test.
>>>
>>> Can you give me backtrace of say 15 seconds each with and without patch.
>>> I think now we must be dispatching some writes, that's a different thing
>>> that writer still sleeps more than 120 seconds because there are way
>>> too many readers.
>>>
>>> May be we need to look into show workload tree scheduling takes place and
>>> tweak that logic a bit.
>> OK, our test cases can be downloaded for free. ;)
>> svn co http://code.taobao.org/svn/dirbench/trunk/meta_test/press/set_vs_get
>> Modify run.sh to be fit for your need. Normally within 10 mins, you will
>> get the livelock. We have a SAS disk with 15000 RPMs.
>>
>> btw, you have to mount the volume on /test since the test program are
>> not that clever. :)
>
> Thanks for the test program. System keeps on working, that's a different
> thing that writes might not make lot of progress.
>
> What do you mean by livelock in your case. How do you define that?
>
> Couple of times I did see hung_task warning with your test. And I also
> saw that we have most of the time starved WRITES but one in a while we
> will dispatch some writes.
>
> Having said that I will still admit that current logic can completely
> starve async writes if there are sufficient number of readers. I can
> reproduce this simply by launching lots of readers and bunch of writers
> using fio.
>
> So I have written another patch, where I don't allow preemption of
> async queue if it waiting for sync requests to drain and has not
> dispatched any request after having been scheduled.
>
> This atleast makes sure that writes are not starved. But that does not
> mean that whole bunch of async writes are dispatched. In presence of
> lots of read activity, expect 1 write to be dispatched every few seconds.
>
> Please give this patch a try and if it still does not work, please upload
> some bltraces while test is running.
>
> You can also run iostat on disk and should be able to see that with
> the patch you are dispatching writes more often than before.
Sorry, the patch doesn't work.
I used trace event to capture all the blktraces since it doesn't
interfere with the tests, hope it helps.
Please downloaded it from http://blog.coly.li/tmp/blktrace.tar.bz2
Thanks
Tao
>
> Thanks
> Vivek
>
> ---
> block/cfq-iosched.c | 9 ++++++++-
> 1 file changed, 8 insertions(+), 1 deletion(-)
>
> Index: linux-2.6/block/cfq-iosched.c
> ===================================================================
> --- linux-2.6.orig/block/cfq-iosched.c 2011-06-10 09:13:01.000000000 -0400
> +++ linux-2.6/block/cfq-iosched.c 2011-06-10 10:02:31.850831735 -0400
> @@ -3315,8 +3315,15 @@ cfq_should_preempt(struct cfq_data *cfqd
> * if the new request is sync, but the currently running queue is
> * not, let the sync request have priority.
> */
> - if (rq_is_sync(rq) && !cfq_cfqq_sync(cfqq))
> + if (rq_is_sync(rq) && !cfq_cfqq_sync(cfqq)) {
> + /*
> + * Allow atleast one dispatch otherwise this can repeat
> + * and writes can be starved completely
> + */
> + if (!cfqq->slice_dispatch)
> + return false;
> return true;
> + }
>
> if (new_cfqq->cfqg != cfqq->cfqg)
> return false;
>
next prev parent reply other threads:[~2011-06-13 10:08 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-09 10:49 CFQ: async queue blocks the whole system Tao Ma
2011-06-09 14:14 ` Vivek Goyal
2011-06-09 14:34 ` Jens Axboe
2011-06-09 14:47 ` Tao Ma
2011-06-09 15:37 ` Vivek Goyal
2011-06-09 15:44 ` Tao Ma
2011-06-09 18:27 ` Vivek Goyal
2011-06-10 5:48 ` Tao Ma
2011-06-10 9:14 ` Vivek Goyal
2011-06-10 10:00 ` Tao Ma
2011-06-10 15:44 ` Vivek Goyal
2011-06-11 7:24 ` Tao Ma
2011-06-13 10:08 ` Tao Ma [this message]
2011-06-13 21:41 ` Vivek Goyal
2011-06-14 7:03 ` Tao Ma
2011-06-14 13:30 ` Vivek Goyal
2011-06-14 15:42 ` Tao Ma
2011-06-14 21:14 ` Vivek Goyal
2011-06-17 3:04 ` Tao Ma
2011-06-17 12:50 ` Vivek Goyal
2011-06-17 14:34 ` Tao Ma
2011-06-10 1:19 ` Shaohua Li
2011-06-10 1:34 ` Shaohua Li
2011-06-10 2:06 ` Tao Ma
2011-06-10 2:35 ` Shaohua Li
2011-06-10 3:02 ` Tao Ma
2011-06-10 9:20 ` Vivek Goyal
2011-06-10 9:21 ` Jens Axboe
2011-06-13 1:03 ` Shaohua Li
2011-06-10 9:17 ` Vivek Goyal
2011-06-10 9:20 ` Jens Axboe
2011-06-10 9:29 ` Vivek Goyal
2011-06-10 9:31 ` Jens Axboe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4DF5E1A8.7080100@tao.ma \
--to=tm@tao.ma \
--cc=axboe@kernel.dk \
--cc=linux-kernel@vger.kernel.org \
--cc=vgoyal@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox