From: Chase Douglas <chase.douglas@canonical.com>
To: djkurtz@chromium.org
Cc: dmitry.torokhov@gmail.com, rydberg@euromail.se,
rubini@cvml.unipv.it, linux-input@vger.kernel.org,
linux-kernel@vger.kernel.org, derek.foreman@collabora.co.uk,
daniel.stone@collabora.co.uk, olofj@chromium.org
Subject: Re: [PATCH 06/12] Input: synaptics - fuzz position if touchpad reports reduced filtering
Date: Tue, 05 Jul 2011 10:49:59 -0700 [thread overview]
Message-ID: <4E134EC7.7050001@canonical.com> (raw)
In-Reply-To: <1309324042-22943-7-git-send-email-djkurtz@chromium.org>
On 06/28/2011 10:07 PM, djkurtz@chromium.org wrote:
> From: Daniel Kurtz <djkurtz@chromium.org>
>
> Synaptics touchpads indicate via a capability bit when they perform
> reduced filtering on position data.
> In such a case, use a non-zero fuzz value.
> Fuzz = 8 was chosen empirically by observing the raw position data
> reported by a clickpad indicating it had reduced filtering.
>
> Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Seems reasonable to me.
Acked-by: Chase Douglas <chase.douglas@canonical.com>
> ---
> drivers/input/mouse/synaptics.c | 17 ++++++++++-------
> drivers/input/mouse/synaptics.h | 3 +++
> 2 files changed, 13 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
> index 74b1222..dc54675 100644
> --- a/drivers/input/mouse/synaptics.c
> +++ b/drivers/input/mouse/synaptics.c
> @@ -687,23 +687,27 @@ static psmouse_ret_t synaptics_process_byte(struct psmouse *psmouse)
> static void set_input_params(struct input_dev *dev, struct synaptics_data *priv)
> {
> int i;
> + int fuzz = 0;
>
> __set_bit(INPUT_PROP_POINTER, dev->propbit);
>
> + if (SYN_CAP_REDUCED_FILTERING(priv->ext_cap_0c))
> + fuzz = SYN_REDUCED_FILTER_FUZZ;
> +
> __set_bit(EV_ABS, dev->evbit);
> - input_set_abs_params(dev, ABS_X,
> - XMIN_NOMINAL, priv->x_max ?: XMAX_NOMINAL, 0, 0);
> - input_set_abs_params(dev, ABS_Y,
> - YMIN_NOMINAL, priv->y_max ?: YMAX_NOMINAL, 0, 0);
> + input_set_abs_params(dev, ABS_X, XMIN_NOMINAL,
> + priv->x_max ?: XMAX_NOMINAL, fuzz, 0);
> + input_set_abs_params(dev, ABS_Y, YMIN_NOMINAL,
> + priv->y_max ?: YMAX_NOMINAL, fuzz, 0);
> input_set_abs_params(dev, ABS_PRESSURE, 0, 255, 0, 0);
>
> if (SYN_CAP_ADV_GESTURE(priv->ext_cap_0c)) {
> __set_bit(INPUT_PROP_SEMI_MT, dev->propbit);
> input_mt_init_slots(dev, 2);
> input_set_abs_params(dev, ABS_MT_POSITION_X, XMIN_NOMINAL,
> - priv->x_max ?: XMAX_NOMINAL, 0, 0);
> + priv->x_max ?: XMAX_NOMINAL, fuzz, 0);
> input_set_abs_params(dev, ABS_MT_POSITION_Y, YMIN_NOMINAL,
> - priv->y_max ?: YMAX_NOMINAL, 0, 0);
> + priv->y_max ?: YMAX_NOMINAL, fuzz, 0);
>
> input_abs_set_res(dev, ABS_MT_POSITION_X, priv->x_res);
> input_abs_set_res(dev, ABS_MT_POSITION_Y, priv->y_res);
> @@ -977,4 +981,3 @@ bool synaptics_supported(void)
> }
>
> #endif /* CONFIG_MOUSE_PS2_SYNAPTICS */
> -
> diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h
> index 34bedde..8a68e66 100644
> --- a/drivers/input/mouse/synaptics.h
> +++ b/drivers/input/mouse/synaptics.h
> @@ -110,6 +110,9 @@
> #define SYN_NEWABS_RELAXED 2
> #define SYN_OLDABS 3
>
> +/* amount to fuzz position data when touchpad reports reduced filtering */
> +#define SYN_REDUCED_FILTER_FUZZ 8
> +
> /*
> * A structure to describe the state of the touchpad hardware (buttons and pad)
> */
next prev parent reply other threads:[~2011-07-05 17:50 UTC|newest]
Thread overview: 71+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-29 5:07 [PATCH 00/12] Synaptics image sensor support djkurtz
2011-06-29 5:07 ` [PATCH 01/12] Input: synaptics - cleanup 0x0c query documentation djkurtz
2011-07-05 17:33 ` Chase Douglas
2011-07-06 13:50 ` Daniel Kurtz
2011-07-07 6:30 ` Dmitry Torokhov
2011-06-29 5:07 ` [PATCH 02/12] Input: synaptics - do not invert y if 0 djkurtz
2011-07-04 21:08 ` Henrik Rydberg
2011-07-05 4:29 ` Daniel Kurtz
2011-07-05 18:07 ` Henrik Rydberg
2011-07-05 18:39 ` Chris Bagwell
2011-07-05 23:02 ` Daniel Kurtz
2011-07-05 17:42 ` Chase Douglas
2011-07-05 22:50 ` Daniel Kurtz
2011-07-05 23:06 ` Chase Douglas
2011-07-05 23:15 ` Daniel Kurtz
2011-07-05 23:25 ` Dmitry Torokhov
2011-06-29 5:07 ` [PATCH 03/12] Input: synaptics - fix minimum reported ABS_TOOL_WIDTH djkurtz
2011-06-29 13:28 ` Chris Bagwell
2011-06-29 16:48 ` Daniel Kurtz
2011-06-29 19:46 ` Chris Bagwell
2011-07-04 21:14 ` Henrik Rydberg
2011-07-09 6:24 ` Jeffrey Brown
2011-06-29 5:07 ` [PATCH 04/12] Input: synaptics - set resolution for MT_POSITION_X/Y axes djkurtz
2011-07-05 17:44 ` Chase Douglas
2011-07-07 6:23 ` Dmitry Torokhov
2011-06-29 5:07 ` [PATCH 05/12] Input: synaptics - process button bits in AGM packets djkurtz
2011-07-04 21:24 ` Henrik Rydberg
2011-07-05 4:38 ` Daniel Kurtz
2011-07-05 18:18 ` Henrik Rydberg
2011-07-05 18:19 ` Chase Douglas
2011-07-05 17:47 ` Chase Douglas
2011-07-07 6:24 ` Dmitry Torokhov
2011-06-29 5:07 ` [PATCH 06/12] Input: synaptics - fuzz position if touchpad reports reduced filtering djkurtz
2011-07-05 17:49 ` Chase Douglas [this message]
2011-07-07 6:25 ` Dmitry Torokhov
2011-06-29 5:07 ` [PATCH 07/12] Input: synaptics - rename synaptics_data.mt to agm djkurtz
2011-07-04 21:26 ` Henrik Rydberg
2011-07-05 4:39 ` Daniel Kurtz
2011-07-05 18:20 ` Henrik Rydberg
2011-07-05 17:53 ` Chase Douglas
2011-06-29 5:07 ` [PATCH 08/12] Input: synaptics - rename set_slot to be more descriptive djkurtz
2011-07-05 17:54 ` Chase Douglas
2011-07-07 6:27 ` Dmitry Torokhov
2011-06-29 5:07 ` [PATCH 09/12] Input: synaptics - add image sensor support djkurtz
2011-07-04 21:42 ` Henrik Rydberg
2011-07-05 5:08 ` Daniel Kurtz
2011-07-05 19:27 ` Henrik Rydberg
2011-07-06 16:41 ` Daniel Kurtz
2011-07-06 17:08 ` Chase Douglas
2011-07-06 17:45 ` Dmitry Torokhov
2011-07-06 18:47 ` Henrik Rydberg
2011-07-06 18:58 ` Dmitry Torokhov
2011-07-06 19:31 ` Henrik Rydberg
2011-07-06 20:00 ` Dmitry Torokhov
2011-07-06 20:20 ` Henrik Rydberg
2011-07-06 21:22 ` Chase Douglas
2011-07-06 21:36 ` Dmitry Torokhov
2011-07-06 22:16 ` Chase Douglas
2011-07-06 22:35 ` Henrik Rydberg
2011-07-06 23:30 ` Chase Douglas
2011-06-29 5:07 ` [PATCH 10/12] Input: synaptics - decode AGM packet types djkurtz
2011-06-29 10:02 ` Chase Douglas
2011-06-29 10:07 ` Daniel Stone
2011-06-29 10:32 ` Chase Douglas
2011-06-29 11:26 ` Daniel Kurtz
2011-06-29 11:04 ` Daniel Kurtz
2011-07-05 18:17 ` Chase Douglas
2011-07-05 18:55 ` Chris Bagwell
2011-07-06 16:53 ` Daniel Kurtz
2011-06-29 5:07 ` [PATCH 11/12] Input: synaptics - process finger (<=3) transitions djkurtz
2011-06-29 5:07 ` [PATCH 12/12] Input: synaptics - process finger (<=5) transitions djkurtz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E134EC7.7050001@canonical.com \
--to=chase.douglas@canonical.com \
--cc=daniel.stone@collabora.co.uk \
--cc=derek.foreman@collabora.co.uk \
--cc=djkurtz@chromium.org \
--cc=dmitry.torokhov@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=olofj@chromium.org \
--cc=rubini@cvml.unipv.it \
--cc=rydberg@euromail.se \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox