Re: [PATCH 1/3]Fix typo interrupt(s) to interrupt(s)

["Justin P. Mattock" <justinmattock@gmail.com>]

jiri,

not sure if you saw these, adding you to the Cc's list

> From: "Justin P. Mattock"<justinmattock@gmail.com>
>
> The patch below fixes some typos interrrupt to interrupt.
> Note I sent something similar a few months ago, either this was the same or
> newly created typos have been created.
>
> Signed-off-by: Justin P. Mattock<justinmattock@gmail.com>
>
> ---
>   arch/arm/mach-omap2/smartreflex.c                |    2 +-
>   arch/powerpc/platforms/embedded6xx/storcenter.c  |    2 +-
>   drivers/net/arm/ks8695net.c                      |    2 +-
>   drivers/net/atlx/atl1.c                          |    2 +-
>   drivers/net/sky2.c                               |    2 +-
>   drivers/net/wireless/rtlwifi/pci.c               |    2 +-
>   drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c |    4 ++--
>   drivers/staging/ft1000/ft1000-usb/ft1000_hw.c    |    2 +-
>   drivers/tty/serial/mrst_max3110.c                |    2 +-
>   drivers/usb/gadget/langwell_udc.c                |    2 +-
>   drivers/usb/musb/musb_gadget.c                   |    2 +-
>   11 files changed, 12 insertions(+), 12 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c
> index fb7dc52..8b6da75 100644
> --- a/arch/arm/mach-omap2/smartreflex.c
> +++ b/arch/arm/mach-omap2/smartreflex.c
> @@ -247,7 +247,7 @@ static void sr_stop_vddautocomp(struct omap_sr *sr)
>    * driver register and sr device intializtion API's. Only one call
>    * will ultimately succeed.
>    *
> - * Currently this function registers interrrupt handler for a particular SR
> + * Currently this function registers interrupt handler for a particular SR
>    * if smartreflex class driver is already registered and has
>    * requested for interrupts and the SR interrupt line in present.
>    */
> diff --git a/arch/powerpc/platforms/embedded6xx/storcenter.c b/arch/powerpc/platforms/embedded6xx/storcenter.c
> index 613070e..f1eebca 100644
> --- a/arch/powerpc/platforms/embedded6xx/storcenter.c
> +++ b/arch/powerpc/platforms/embedded6xx/storcenter.c
> @@ -77,7 +77,7 @@ static void __init storcenter_setup_arch(void)
>   }
>
>   /*
> - * Interrupt setup and service.  Interrrupts on the turbostation come
> + * Interrupt setup and service.  Interrupts on the turbostation come
>    * from the four PCI slots plus onboard 8241 devices: I2C, DUART.
>    */
>   static void __init storcenter_init_IRQ(void)
> diff --git a/drivers/net/arm/ks8695net.c b/drivers/net/arm/ks8695net.c
> index a7b0caa..47e7be6 100644
> --- a/drivers/net/arm/ks8695net.c
> +++ b/drivers/net/arm/ks8695net.c
> @@ -412,7 +412,7 @@ ks8695_tx_irq(int irq, void *dev_id)
>    *    Interrupt Status Register (Offset 0xF208)
>    *        Bit29: WAN MAC Receive Status
>    *        Bit16: LAN MAC Receive Status
> - *    So, this Rx interrrupt enable/status bit number is equal
> + *    So, this Rx interrupt enable/status bit number is equal
>    *    as Rx IRQ number.
>    */
>   static inline u32 ks8695_get_rx_enable_bit(struct ks8695_priv *ksp)
> diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c
> index cd5789f..ab1d8a4 100644
> --- a/drivers/net/atlx/atl1.c
> +++ b/drivers/net/atlx/atl1.c
> @@ -858,7 +858,7 @@ static s32 atl1_init_hw(struct atl1_hw *hw)
>   	atl1_init_flash_opcode(hw);
>
>   	if (!hw->phy_configured) {
> -		/* enable GPHY LinkChange Interrrupt */
> +		/* enable GPHY LinkChange Interrupt */
>   		ret_val = atl1_write_phy_reg(hw, 18, 0xC00);
>   		if (ret_val)
>   			return ret_val;
> diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
> index 3ee41da..a04c56e 100644
> --- a/drivers/net/sky2.c
> +++ b/drivers/net/sky2.c
> @@ -1973,7 +1973,7 @@ static void sky2_hw_down(struct sky2_port *sky2)
>
>   	sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
>
> -	/* Force any delayed status interrrupt and NAPI */
> +	/* Force any delayed status interrupt and NAPI */
>   	sky2_write32(hw, STAT_LEV_TIMER_CNT, 0);
>   	sky2_write32(hw, STAT_TX_TIMER_CNT, 0);
>   	sky2_write32(hw, STAT_ISR_TIMER_CNT, 0);
> diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c
> index 9f8ccae..52cd981 100644
> --- a/drivers/net/wireless/rtlwifi/pci.c
> +++ b/drivers/net/wireless/rtlwifi/pci.c
> @@ -1573,7 +1573,7 @@ static void rtl_pci_stop(struct ieee80211_hw *hw)
>   	u8 RFInProgressTimeOut = 0;
>
>   	/*
> -	 *should before disable interrrupt&adapter
> +	 *should before disable interrupt&adapter
>   	 *and will do it immediately.
>   	 */
>   	set_hal_stop(rtlhal);
> diff --git a/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c b/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c
> index 830822f..f7ce399 100644
> --- a/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c
> +++ b/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c
> @@ -390,10 +390,10 @@ static void ft1000_reset_asic(struct net_device *dev)
>   	}
>   	mdelay(1);
>   	if (info->AsicID == ELECTRABUZZ_ID) {
> -		// set watermark to -1 in order to not generate an interrrupt
> +		// set watermark to -1 in order to not generate an interrupt
>   		ft1000_write_reg(dev, FT1000_REG_WATERMARK, 0xffff);
>   	} else {
> -		// set watermark to -1 in order to not generate an interrrupt
> +		// set watermark to -1 in order to not generate an interrupt
>   		ft1000_write_reg(dev, FT1000_REG_MAG_WATERMARK, 0xffff);
>   	}
>   	// clear interrupts
> diff --git a/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c b/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c
> index b0a4211..d3642a2 100644
> --- a/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c
> +++ b/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c
> @@ -601,7 +601,7 @@ static void ft1000_reset_asic(struct net_device *dev)
>
>   	mdelay(1);
>
> -	/* set watermark to -1 in order to not generate an interrrupt */
> +	/* set watermark to -1 in order to not generate an interrupt */
>   	ft1000_write_register(ft1000dev, 0xffff, FT1000_REG_MAG_WATERMARK);
>
>   	/* clear interrupts */
> diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c
> index 1bd2845..e829ac2 100644
> --- a/drivers/tty/serial/mrst_max3110.c
> +++ b/drivers/tty/serial/mrst_max3110.c
> @@ -23,7 +23,7 @@
>    *    1 word. If SPI master controller doesn't support sclk frequency change,
>    *    then the char need be sent out one by one with some delay
>    *
> - * 2. Currently only RX available interrrupt is used, no need for waiting TXE
> + * 2. Currently only RX available interrupt is used, no need for waiting TXE
>    *    interrupt for a low speed UART device
>    */
>
> diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c
> index 9cee88a..8d6ca5e 100644
> --- a/drivers/usb/gadget/langwell_udc.c
> +++ b/drivers/usb/gadget/langwell_udc.c
> @@ -2968,7 +2968,7 @@ static irqreturn_t langwell_irq(int irq, void *_dev)
>   		handle_port_change(dev);
>   	}
>
> -	/* suspend interrrupt */
> +	/* suspend interrupt */
>   	if (irq_sts&  STS_SLI) {
>   		dev_vdbg(&dev->pdev->dev, "suspend interrupt\n");
>   		handle_bus_suspend(dev);
> diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
> index 0a50a35..e30d56d 100644
> --- a/drivers/usb/musb/musb_gadget.c
> +++ b/drivers/usb/musb/musb_gadget.c
> @@ -704,7 +704,7 @@ static void rxstate(struct musb *musb, struct musb_request *req)
>   	 * most these gadgets, end of is signified either by a short packet,
>   	 * or filling the last byte of the buffer.  (Sending extra data in
>   	 * that last pckate should trigger an overflow fault.)  But in mode 1,
> -	 * we don't get DMA completion interrrupt for short packets.
> +	 * we don't get DMA completion interrupt for short packets.
>   	 *
>   	 * Theoretically, we could enable DMAReq irq (MUSB_RXCSR_DMAMODE = 1),
>   	 * to get endpoint interrupt on every DMA req, but that didn't seem