From: Chris Boot <bootc@bootc.net>
To: target-devel@vger.kernel.org,
linux1394-devel@lists.sourceforge.net,
linux-scsi@vger.kernel.org, lkml <linux-kernel@vger.kernel.org>
Subject: FireWire/SBP2 Target mode
Date: Wed, 17 Aug 2011 15:51:12 +0100 [thread overview]
Message-ID: <4E4BD560.4010806@bootc.net> (raw)
Hi folks,
Now that we have a nice SCSI target framework in the kernel, and drivers
either in-tree or being worked on for iSCSI, FC, FCoE, SAS and iSER, I
was wondering about the possibility of adding FireWire to that list.
Apple Macs have had a FireWire Target Disk mode for a long time, and
there is even a program called Endpoint[1] that apparently does this on
Linux though it looks completely untouched since 2003 and no longer
works as it depends on the old FireWire stack.
I would very much like to see something like this added to the kernel,
and would very much like to contribute to writing this feature. However
my kernel development knowledge is very limited indeed so this would
require a lot hand-holding and mentoring.
What's the interest in such a feature? Would anyone be able to give some
(a lot?) of their time to help write this?
Thanks,
Chris
[1] http://oss.oracle.com/projects/endpoint/
next reply other threads:[~2011-08-17 14:56 UTC|newest]
Thread overview: 100+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-17 14:51 Chris Boot [this message]
2011-08-17 18:57 ` FireWire/SBP2 Target mode Stefan Richter
2011-08-18 16:19 ` Clemens Ladisch
2012-02-01 19:50 ` Andy Grover
2012-02-01 21:41 ` Stefan Richter
2012-02-02 9:22 ` Boaz Harrosh
2012-02-02 10:09 ` Clemens Ladisch
2012-02-06 13:13 ` Chris Boot
2012-02-06 14:43 ` Clemens Ladisch
2012-02-06 14:51 ` Chris Boot
2012-02-06 20:26 ` Stefan Richter
2012-02-06 22:28 ` Chris Boot
2012-02-06 23:00 ` Julian Calaby
2012-02-06 23:09 ` Chris Boot
2012-02-07 7:38 ` Chris Boot
2012-02-07 10:06 ` Julian Calaby
2012-02-07 19:17 ` Stefan Richter
2012-02-07 19:53 ` Chris Boot
2012-02-11 19:43 ` [RFC][PATCH 00/13] firewire-sbp-target: FireWire SBP-2 SCSI target Chris Boot
2012-02-11 19:44 ` [PATCH 01/13] firewire: Add function to get speed from opaque struct fw_request Chris Boot
2012-02-11 19:44 ` [PATCH 02/13] firewire: Add EXPORT_SYMBOL_GPL(fw_card_release) Chris Boot
2012-02-11 19:44 ` [PATCH 03/13] firewire-sbp-target: Add Kconfig, Makefile and TODO Chris Boot
2012-02-13 12:50 ` Nicholas A. Bellinger
2012-02-11 19:44 ` [PATCH 04/13] firewire-sbp-target: Add sbp_base.h header Chris Boot
2012-02-11 19:44 ` [PATCH 05/13] firewire-sbp-target: Add sbp_configfs.c Chris Boot
2012-02-11 19:44 ` [PATCH 06/13] firewire-sbp-target: Add sbp_fabric.{c,h} Chris Boot
2012-02-13 13:06 ` Nicholas A. Bellinger
[not found] ` <337FFBD7-6B4A-41CA-BB57-6038C935B5BF@bootc.net>
2012-02-13 19:53 ` Stefan Richter
2012-02-13 22:41 ` Nicholas A. Bellinger
2012-02-11 19:44 ` [PATCH 07/13] firewire-sbp-target: Add sbp_proto.{c,h} Chris Boot
2012-02-11 19:44 ` [PATCH 08/13] firewire-sbp-target: add sbp_management_agent.{c,h} Chris Boot
2012-02-11 19:44 ` [PATCH 09/13] firewire-sbp-target: Add sbp_login.{c,h} Chris Boot
2012-02-11 19:44 ` [PATCH 10/13] firewire-sbp-target: Add sbp_target_agent.{c,h} Chris Boot
2012-02-11 19:44 ` [PATCH 11/13] firewire-sbp-target: Add sbp_scsi_cmnd.{c,h} Chris Boot
2012-02-11 19:44 ` [PATCH 12/13] firewire-sbp-target: Add sbp_util.{c,h} Chris Boot
2012-02-11 19:44 ` [PATCH 13/13] firewire-sbp-target: Add to target Kconfig and Makefile Chris Boot
2012-02-12 14:12 ` [RFC][PATCH 00/13] firewire-sbp-target: FireWire SBP-2 SCSI target Stefan Richter
2012-02-12 15:13 ` Chris Boot
2012-02-12 16:16 ` Stefan Richter
2012-02-15 14:47 ` [PATCH v2 00/11] " Chris Boot
2012-02-15 14:47 ` [PATCH v2 01/11] firewire: Add function to get speed from opaque struct fw_request Chris Boot
2012-02-15 19:09 ` Stefan Richter
2012-02-15 19:10 ` Chris Boot
2012-02-15 22:01 ` Stefan Richter
2012-02-16 9:12 ` Chris Boot
2012-02-15 14:47 ` [PATCH v2 02/11] firewire: Move fw_card kref functions into linux/firewire.h Chris Boot
2012-02-15 19:10 ` Stefan Richter
2012-02-16 9:18 ` Chris Boot
2012-02-15 14:47 ` [PATCH v2 03/11] firewire-sbp-target: Add Kconfig, Makefile and TODO Chris Boot
2012-02-15 14:47 ` [PATCH v2 04/11] firewire-sbp-target: Add sbp_base.h header Chris Boot
2012-02-15 19:15 ` Stefan Richter
2012-02-16 9:55 ` Chris Boot
2012-02-15 14:47 ` [PATCH v2 05/11] firewire-sbp-target: Add sbp_configfs.c Chris Boot
2012-02-15 19:21 ` Stefan Richter
2012-02-16 9:57 ` Chris Boot
2012-02-16 13:48 ` Stefan Richter
2012-02-15 14:47 ` [PATCH v2 06/11] firewire-sbp-target: Add sbp_fabric.{c,h} Chris Boot
2012-02-15 14:47 ` [PATCH v2 07/11] firewire-sbp-target: add sbp_management_agent.{c,h} Chris Boot
2012-02-15 19:48 ` Stefan Richter
2012-02-16 10:28 ` Chris Boot
2012-02-16 14:12 ` Stefan Richter
2012-02-15 14:47 ` [PATCH v2 08/11] firewire-sbp-target: Add sbp_login.{c,h} Chris Boot
2012-02-15 21:00 ` Stefan Richter
2012-02-16 11:21 ` Chris Boot
2012-03-03 17:37 ` Stefan Richter
2012-03-15 17:48 ` Paul E. McKenney
2012-02-15 14:47 ` [PATCH v2 09/11] firewire-sbp-target: Add sbp_target_agent.{c,h} Chris Boot
2012-02-15 21:27 ` Stefan Richter
2012-02-16 11:25 ` Chris Boot
2012-02-18 14:59 ` Stefan Richter
2012-02-18 15:05 ` Chris Boot
2012-02-15 14:47 ` [PATCH v2 10/11] firewire-sbp-target: Add sbp_scsi_cmnd.{c,h} Chris Boot
2012-02-15 14:47 ` [PATCH v2 11/11] firewire-sbp-target: Add to target Kconfig and Makefile Chris Boot
2012-04-11 14:20 ` [PATCH v3 00/11] firewire-sbp-target: FireWire SBP-2 SCSI target Chris Boot
2012-04-11 14:20 ` [PATCH 01/11] firewire: Add function to get speed from opaque struct fw_request Chris Boot
2012-04-11 14:20 ` [PATCH 02/11] firewire: Move fw_card kref functions into linux/firewire.h Chris Boot
2012-04-11 14:20 ` [PATCH 03/11] firewire-sbp-target: Add Kconfig, Makefile and TODO Chris Boot
2012-04-11 14:20 ` [PATCH 04/11] firewire-sbp-target: Add sbp_base.h header Chris Boot
2012-04-11 14:20 ` [PATCH 05/11] firewire-sbp-target: Add sbp_configfs.c Chris Boot
2012-04-11 14:20 ` [PATCH 06/11] firewire-sbp-target: Add sbp_fabric.{c,h} Chris Boot
2012-04-11 14:20 ` [PATCH 07/11] firewire-sbp-target: Add sbp_management_agent.{c,h} Chris Boot
2012-04-11 14:20 ` [PATCH 08/11] firewire-sbp-target: Add sbp_login.{c,h} Chris Boot
2012-04-14 10:17 ` Stefan Richter
2012-04-11 14:20 ` [PATCH 09/11] firewire-sbp-target: Add sbp_target_agent.{c,h} Chris Boot
2012-04-14 10:49 ` Stefan Richter
2012-04-14 11:33 ` Stefan Richter
2012-04-11 14:20 ` [PATCH 10/11] firewire-sbp-target: Add sbp_scsi_cmnd.{c,h} Chris Boot
2012-04-11 14:20 ` [PATCH 11/11] firewire-sbp-target: Add to target Kconfig and Makefile Chris Boot
2012-04-12 21:02 ` [PATCH v3 00/11] firewire-sbp-target: FireWire SBP-2 SCSI target Andy Grover
2012-04-13 3:03 ` Nicholas A. Bellinger
2012-04-13 13:16 ` Chris Boot
2012-04-14 1:23 ` Nicholas A. Bellinger
2012-04-14 9:12 ` [PATCH 0/2] sbp-target: cleanup after merge into single file Chris Boot
2012-04-14 9:12 ` [PATCH 1/2] sbp-target: minor cleanups after merging " Chris Boot
2012-04-14 9:12 ` [PATCH 2/2] sbp-target: update TODO file Chris Boot
2012-04-14 21:44 ` [PATCH 0/2] sbp-target: cleanup after merge into single file Nicholas A. Bellinger
2012-04-14 23:11 ` Stefan Richter
2012-04-15 1:22 ` Nicholas A. Bellinger
2012-04-17 10:48 ` [PATCH v3 00/11] firewire-sbp-target: FireWire SBP-2 SCSI target Chris Boot
2012-04-18 7:17 ` Nicholas A. Bellinger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E4BD560.4010806@bootc.net \
--to=bootc@bootc.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=linux1394-devel@lists.sourceforge.net \
--cc=target-devel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).