sdcard autodetection enabled by running digikam somehow

sdcard autodetection enabled by running digikam somehow

[Harald Dunkel]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi folks,

Maybe its a stupid question, but why do I have to run
digikam to make autodetection of sd cards work?

Before running digikam nothing happens if I insert a sd
card. After running digikam inserting and removing sd cards
is handled as expected, even if I logout and use root to
kill all jobs and agents that might be related to my
previous session (dbus, gconfd-2, gvfsd, etc).

This seems weird.

Of course I also checked lsmod: no additional modules have
been loaded by running digikam.


Kernel is 3.0.6. I am not running KDE or Gnome or any other
fancy desktop gui, only X and fvwm2. No hal, either. lsusb
of the card reader can be found below.


Any helpful comment would be highly appreciated.

Harri
- --------------------------------------------------------------
Bus 003 Device 006: ID 0424:2228 Standard Microsystems Corp. 9-in-2 Card Reader
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x0424 Standard Microsystems Corp.
  idProduct          0x2228 9-in-2 Card Reader
  bcdDevice            4.44
  iManufacturer           1
  iProduct                2
  iSerial                 3
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           39
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xc0
      Self Powered
    MaxPower                2mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     80 Bulk (Zip)
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               1
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
        DEVICE CLASS:  07 21 07 e8 03 fe ff
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)

iEYEARECAAYFAk6V3PEACgkQUTlbRTxpHjcwPgCgkvxiCL03+yppWQ3fXvi8L+Fe
fPUAoIaeXRnSJNBm67nr2hp0xQA7WAqK
=qR2g
-----END PGP SIGNATURE-----