From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932225Ab1JRMNm (ORCPT ); Tue, 18 Oct 2011 08:13:42 -0400 Received: from dalsmrelay2.nai.com ([205.227.136.216]:43146 "EHLO dalsmrelay2.nai.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754936Ab1JRMNl (ORCPT ); Tue, 18 Oct 2011 08:13:41 -0400 Message-ID: <4E9D6C05.9040106@snapgear.com> Date: Tue, 18 Oct 2011 22:07:33 +1000 From: Greg Ungerer User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.23) Gecko/20110922 Thunderbird/3.1.15 MIME-Version: 1.0 To: Paul Bolle CC: Geert Uytterhoeven , , Subject: Re: [PATCH 12/21 v2] m68k: drop unused Kconfig symbols References: <1318925407.6414.22.camel@x61.thuisdomein> In-Reply-To: <1318925407.6414.22.camel@x61.thuisdomein> Content-Type: text/plain; charset="ISO-8859-1"; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi Paul, On 10/18/2011 06:10 PM, Paul Bolle wrote: > Signed-off-by: Paul Bolle > --- > 0) Still only "git grep" tested. > > 1) New in v2: > - redone for linux-next master > - dropped a few "select EMAC_INC" and "select HW_FEITH" lines that > weren't in current mainline > - dropped SOM5282EM too (discovered this while doing this second > version, my scripts aren't smart enough too catch it) Hmm. I don't want to lose the SOM5282EM config option. Although it isn't used inside the code it does let the configurer know that this specific board is supported. Regards Greg > arch/m68k/Kconfig.devices | 28 +------------------------ > arch/m68k/Kconfig.machine | 50 --------------------------------------------- > 2 files changed, 1 insertions(+), 77 deletions(-) > > diff --git a/arch/m68k/Kconfig.devices b/arch/m68k/Kconfig.devices > index d964dc4..dbff941 100644 > --- a/arch/m68k/Kconfig.devices > +++ b/arch/m68k/Kconfig.devices > @@ -77,32 +77,6 @@ config MULTIFACE_III_TTY > > To compile this driver as a module, choose M here. > > -config GVPIOEXT > - tristate "GVP IO-Extender support" > - depends on PARPORT=n&& ZORRO > - help > - If you want to use a GVP IO-Extender serial card in Linux, say Y. > - Otherwise, say N. > - > -config GVPIOEXT_LP > - tristate "GVP IO-Extender parallel printer support" > - depends on GVPIOEXT > - help > - Say Y to enable driving a printer from the parallel port on your > - GVP IO-Extender card, N otherwise. > - > -config GVPIOEXT_PLIP > - tristate "GVP IO-Extender PLIP support" > - depends on GVPIOEXT > - help > - Say Y to enable doing IP over the parallel port on your GVP > - IO-Extender card, N otherwise. > - > -config MAC_HID > - bool > - depends on INPUT_ADBHID > - default y > - > config HPDCA > tristate "HP DCA serial support" > depends on DIO&& SERIAL_8250 > @@ -145,7 +119,7 @@ config DN_SERIAL > > config SERIAL_CONSOLE > bool "Support for serial port console" > - depends on (AMIGA || ATARI || SUN3 || SUN3X || VME || APOLLO)&& (ATARI_MFPSER=y || ATARI_MIDI=y || AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL) > + depends on (AMIGA || ATARI || SUN3 || SUN3X || VME || APOLLO)&& (ATARI_MFPSER=y || ATARI_MIDI=y || AMIGA_BUILTIN_SERIAL=y || MULTIFACE_III_TTY=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL) > ---help--- > If you say Y here, it will be possible to use a serial port as the > system console (the system console is the device which receives all > diff --git a/arch/m68k/Kconfig.machine b/arch/m68k/Kconfig.machine > index 7d5c20b..c19b514 100644 > --- a/arch/m68k/Kconfig.machine > +++ b/arch/m68k/Kconfig.machine > @@ -303,16 +303,6 @@ config COBRA5282 > help > Support for the senTec COBRA5282 board. > > -config EMAC_INC > - bool > - > -config SOM5282EM > - bool "EMAC.Inc SOM5282EM board support" > - depends on M528x > - select EMAC_INC > - help > - Support for the EMAC.Inc SOM5282EM module. > - > config WILDFIRE > bool "Intec Automation Inc. WildFire board support" > depends on M528x > @@ -371,27 +361,21 @@ config FIREBEE > help > Support for the FireBee ColdFire 5475 based board. > > -config HW_FEITH > - bool > - > config CLEOPATRA > bool "Feith CLEOPATRA board support" > depends on (M5307 || M5407) > - select HW_FEITH > help > Support for the Feith Cleopatra boards. > > config CANCam > bool "Feith CANCam board support" > depends on M5272 > - select HW_FEITH > help > Support for the Feith CANCam board. > > config SCALES > bool "Feith SCALES board support" > depends on M5272 > - select HW_FEITH > help > Support for the Feith SCALES board. > > @@ -438,13 +422,6 @@ if !MMU || COLDFIRE > > comment "Machine Options" > > -config ROMFS_FROM_ROM > - bool "ROMFS image not RAM resident" > - depends on (NETtel || SNAPGEAR) > - help > - The ROMfs filesystem will stay resident in the FLASH/ROM, not be > - moved into RAM. > - > config UBOOT > bool "Support for U-Boot command line parameters" > help > @@ -524,33 +501,6 @@ config KERNELBASE > a system with the RAM based at address 0, and leaving enough room > for the theoretical maximum number of 256 vectors. > > -choice > - prompt "RAM bus width" > - default RAMAUTOBIT > - > -config RAMAUTOBIT > - bool "AUTO" > - help > - Select the physical RAM data bus size. Not needed on most platforms, > - so you can generally choose AUTO. > - > -config RAM8BIT > - bool "8bit" > - help > - Configure RAM bus to be 8 bits wide. > - > -config RAM16BIT > - bool "16bit" > - help > - Configure RAM bus to be 16 bits wide. > - > -config RAM32BIT > - bool "32bit" > - help > - Configure RAM bus to be 32 bits wide. > - > -endchoice > - > comment "ROM configuration" > > config ROM -- ------------------------------------------------------------------------ Greg Ungerer -- Principal Engineer EMAIL: gerg@snapgear.com SnapGear Group, McAfee PHONE: +61 7 3435 2888 8 Gardner Close, FAX: +61 7 3891 3630 Milton, QLD, 4064, Australia WEB: http://www.SnapGear.com