From: Dan Delaney <drdelaney@loclhst.com>
To: Jiri Kosina <jkosina@suse.cz>
Cc: linux-kernel@vger.kernel.org, Greg KH <gregkh@suse.de>,
linux-usb@vger.kernel.org
Subject: Re: [PATCH] usbled: add support for Dream Cheeky DL100B Mailbox Friends Alert (1d34:000a)
Date: Sat, 19 Nov 2011 17:57:21 -0600 [thread overview]
Message-ID: <4EC84261.9050701@loclhst.com> (raw)
In-Reply-To: <alpine.LNX.2.00.1111200007350.15187@pobox.suse.cz>
Sorry meant to follow up on this sooner.
Adding support for Dream Cheeky DL1800B Friend Alert device.
Signed-off-by: Dan Delaney <drdelaney@loclhst.com>
Here is the patch again for reference:
diff -ur a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
--- a/drivers/hid/hid-core.c 2011-11-16 02:06:51.000000000 -0600
+++ b/drivers/hid/hid-core.c 2011-11-16 02:01:06.000000000 -0600
@@ -1687,6 +1687,7 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EARTHMATE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EM_LT20) },
{ HID_USB_DEVICE(USB_VENDOR_ID_DREAM_CHEEKY, 0x0004) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_DREAM_CHEEKY, 0x000a) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ESSENTIAL_REALITY, USB_DEVICE_ID_ESSENTIAL_REALITY_P5) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ETT, USB_DEVICE_ID_TC5UH) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ETT, USB_DEVICE_ID_TC4UM) },
diff -ur a/drivers/usb/misc/usbled.c b/drivers/usb/misc/usbled.c
--- a/drivers/usb/misc/usbled.c 2011-11-16 02:05:43.000000000 -0600
+++ b/drivers/usb/misc/usbled.c 2011-11-16 02:01:40.000000000 -0600
@@ -31,6 +31,8 @@
.driver_info = DELCOM_VISUAL_SIGNAL_INDICATOR },
{ USB_DEVICE(0x1d34, 0x0004),
.driver_info = DREAM_CHEEKY_WEBMAIL_NOTIFIER },
+ { USB_DEVICE(0x1d34, 0x000a),
+ .driver_info = DREAM_CHEEKY_WEBMAIL_NOTIFIER },
{ },
};
MODULE_DEVICE_TABLE (usb, id_table);
On 11/19/2011 5:10 PM, Jiri Kosina wrote:
> On Fri, 18 Nov 2011, Dan Delaney wrote:
>
>> This patch will add support for the Dream Cheeky Mailbox Friends Alert (http://www.dreamcheeky.com/mailbox-friends-alert) usb led dongle.
>> The drivers for the webmail notifier (1d34:0004) work perfectly fine, so I just would like to add support for the new device.
>> I have tested the patch on gentoo sources of 2.6.39 and 3.0.6, as well as vanilla 3.1.1 and 3.2-rc2.
>>
>> This is my first attempt at making a change to the kernel, so let me know if I need to change something (formatting, where to post, etc)
>>
>> I am not sure who else I may need to CC on this.
>
> Dan,
>
> thanks for the patch.
>
> I am adding some more CCs. Greg, it's 50:50 between HID and usbled code,
> so just let me know whether you'll be taking it or I should take it,
> either way is fine by me of course.
>
> Dan, we also need your Signed-off-by: line (see
> Documentation/SubmittingPatches), othwewise we unfortunately can't accept
> your contribution.
>
>>
>> Device data:
>> [169976.524055] usb 6-1: new low speed USB device number 3 using ohci_hcd
>> [169976.685943] usb 6-1: New USB device found, idVendor=1d34, idProduct=000a
>> [169976.685947] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>> [169976.685950] usb 6-1: Product: DL100B Dream Cheeky Generic Controller
>> [169976.685951] usb 6-1: Manufacturer: Dream Link
>> [169976.689931] usbled 6-1:1.0: USB LED device now attached
>>
>> Bus 006 Device 003: ID 1d34:000a
>> Device Descriptor:
>> bLength 18
>> bDescriptorType 1
>> bcdUSB 1.10
>> bDeviceClass 0 (Defined at Interface level)
>> bDeviceSubClass 0
>> bDeviceProtocol 0
>> bMaxPacketSize0 8
>> idVendor 0x1d34
>> idProduct 0x000a
>> bcdDevice 0.02
>> iManufacturer 1 Dream Link
>> iProduct 2 DL100B Dream Cheeky Generic Controller
>> iSerial 0
>> bNumConfigurations 1
>> Configuration Descriptor:
>> bLength 9
>> bDescriptorType 2
>> wTotalLength 34
>> bNumInterfaces 1
>> bConfigurationValue 1
>> iConfiguration 0
>> bmAttributes 0x80
>> (Bus Powered)
>> MaxPower 500mA
>> Interface Descriptor:
>> bLength 9
>> bDescriptorType 4
>> bInterfaceNumber 0
>> bAlternateSetting 0
>> bNumEndpoints 1
>> bInterfaceClass 3 Human Interface Device
>> bInterfaceSubClass 0 No Subclass
>> bInterfaceProtocol 0 None
>> iInterface 0
>> HID Device Descriptor:
>> bLength 9
>> bDescriptorType 33
>> bcdHID 1.10
>> bCountryCode 0 Not supported
>> bNumDescriptors 1
>> bDescriptorType 34 Report
>> wDescriptorLength 37
>> Report Descriptors:
>> ** UNAVAILABLE **
>> Endpoint Descriptor:
>> bLength 7
>> bDescriptorType 5
>> bEndpointAddress 0x81 EP 1 IN
>> bmAttributes 3
>> Transfer Type Interrupt
>> Synch Type None
>> Usage Type Data
>> wMaxPacketSize 0x0008 1x 8 bytes
>> bInterval 10
>> Device Status: 0x0000
>> (Bus Powered)
>>
>>
>> And the patch:
>>
>> --- a/drivers/hid/hid-core.c 2011-11-16 02:06:51.000000000 -0600
>> +++ b/drivers/hid/hid-core.c 2011-11-16 02:01:06.000000000 -0600
>> @@ -1687,6 +1687,7 @@
>> { HID_USB_DEVICE(USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EARTHMATE) },
>> { HID_USB_DEVICE(USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EM_LT20) },
>> { HID_USB_DEVICE(USB_VENDOR_ID_DREAM_CHEEKY, 0x0004) },
>> + { HID_USB_DEVICE(USB_VENDOR_ID_DREAM_CHEEKY, 0x000a) },
>> { HID_USB_DEVICE(USB_VENDOR_ID_ESSENTIAL_REALITY, USB_DEVICE_ID_ESSENTIAL_REALITY_P5) },
>> { HID_USB_DEVICE(USB_VENDOR_ID_ETT, USB_DEVICE_ID_TC5UH) },
>> { HID_USB_DEVICE(USB_VENDOR_ID_ETT, USB_DEVICE_ID_TC4UM) },
>> diff -ur a/drivers/usb/misc/usbled.c b/drivers/usb/misc/usbled.c
>> --- a/drivers/usb/misc/usbled.c 2011-11-16 02:05:43.000000000 -0600
>> +++ b/drivers/usb/misc/usbled.c 2011-11-16 02:01:40.000000000 -0600
>> @@ -31,6 +31,8 @@
>> .driver_info = DELCOM_VISUAL_SIGNAL_INDICATOR },
>> { USB_DEVICE(0x1d34, 0x0004),
>> .driver_info = DREAM_CHEEKY_WEBMAIL_NOTIFIER },
>> + { USB_DEVICE(0x1d34, 0x000a),
>> + .driver_info = DREAM_CHEEKY_WEBMAIL_NOTIFIER },
>> { },
>> };
>> MODULE_DEVICE_TABLE (usb, id_table);
>>
>>
>> --
>> Dan Delaney
>> drdelaney@loclhst.com
>>
>
--
Dan Delaney
drdelaney@loclhst.com
next prev parent reply other threads:[~2011-11-19 23:57 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-18 7:51 [PATCH] usbled: add support for Dream Cheeky DL100B Mailbox Friends Alert (1d34:000a) Dan Delaney
2011-11-18 9:28 ` Oliver Neukum
2011-11-19 23:10 ` Jiri Kosina
2011-11-19 23:57 ` Dan Delaney [this message]
2011-11-20 0:35 ` Greg KH
2011-11-20 9:23 ` Jiri Kosina
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4EC84261.9050701@loclhst.com \
--to=drdelaney@loclhst.com \
--cc=gregkh@suse.de \
--cc=jkosina@suse.cz \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox