Re: [tip:timers/core] clocksource: m86k: Convert to clocksource_register_hz/khz

Re: [tip:timers/core] clocksource: m86k: Convert to clocksource_register_hz/khz

[Greg Ungerer]

Hi John,

On 06/12/11 07:23, tip-bot for John Stultz wrote:
> Commit-ID:  010f3f1692b22f8ddabdccc6526915e181e49447
> Gitweb:     http://git.kernel.org/tip/010f3f1692b22f8ddabdccc6526915e181e49447
> Author:     John Stultz<johnstul@us.ibm.com>
> AuthorDate: Mon, 26 Apr 2010 20:21:52 -0700
> Committer:  John Stultz<john.stultz@linaro.org>
> CommitDate: Mon, 21 Nov 2011 19:01:01 -0800
>
> clocksource: m86k: Convert to clocksource_register_hz/khz
>
> This converts the m86k clocksources to use clocksource_register_hz/khz
>
> CC: Geert Uytterhoeven<geert@linux-m68k.org>
> CC: Greg Ungerer<gerg@uclinux.org>
> Acked-by: Greg Ungerer<gerg@uclinux.org>
> Signed-off-by: John Stultz<johnstul@us.ibm.com>

I pulled this into the m68knommu git tree a little while back.
I plan on pushing it for 3.3. It is currently being pulled into
linux-next as well.

Regards
Greg


> ---
>   arch/m68k/platform/68328/timers.c       |    4 +---
>   arch/m68k/platform/coldfire/dma_timer.c |    5 +----
>   arch/m68k/platform/coldfire/pit.c       |    4 +---
>   arch/m68k/platform/coldfire/sltimers.c  |    4 +---
>   arch/m68k/platform/coldfire/timers.c    |    4 +---
>   5 files changed, 5 insertions(+), 16 deletions(-)
>
> diff --git a/arch/m68k/platform/68328/timers.c b/arch/m68k/platform/68328/timers.c
> index 309f725..f267886 100644
> --- a/arch/m68k/platform/68328/timers.c
> +++ b/arch/m68k/platform/68328/timers.c
> @@ -93,7 +93,6 @@ static struct clocksource m68328_clk = {
>   	.name	= "timer",
>   	.rating	= 250,
>   	.read	= m68328_read_clk,
> -	.shift	= 20,
>   	.mask	= CLOCKSOURCE_MASK(32),
>   	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
>   };
> @@ -115,8 +114,7 @@ void hw_timer_init(void)
>
>   	/* Enable timer 1 */
>   	TCTL |= TCTL_TEN;
> -	m68328_clk.mult = clocksource_hz2mult(TICKS_PER_JIFFY*HZ, m68328_clk.shift);
> -	clocksource_register(&m68328_clk);
> +	clocksource_register_hz(&m68328_clk, TICKS_PER_JIFFY*HZ);
>   }
>
>   /***************************************************************************/
> diff --git a/arch/m68k/platform/coldfire/dma_timer.c b/arch/m68k/platform/coldfire/dma_timer.c
> index a5f5628..235ad57 100644
> --- a/arch/m68k/platform/coldfire/dma_timer.c
> +++ b/arch/m68k/platform/coldfire/dma_timer.c
> @@ -44,7 +44,6 @@ static struct clocksource clocksource_cf_dt = {
>   	.rating		= 200,
>   	.read		= cf_dt_get_cycles,
>   	.mask		= CLOCKSOURCE_MASK(32),
> -	.shift		= 20,
>   	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
>   };
>
> @@ -60,9 +59,7 @@ static int __init  init_cf_dt_clocksource(void)
>   	__raw_writeb(0x00, DTER0);
>   	__raw_writel(0x00000000, DTRR0);
>   	__raw_writew(DMA_DTMR_CLK_DIV_16 | DMA_DTMR_ENABLE, DTMR0);
> -	clocksource_cf_dt.mult = clocksource_hz2mult(DMA_FREQ,
> -						     clocksource_cf_dt.shift);
> -	return clocksource_register(&clocksource_cf_dt);
> +	return clocksource_register_hz(&clocksource_cf_dt, DMA_FREQ);
>   }
>
>   arch_initcall(init_cf_dt_clocksource);
> diff --git a/arch/m68k/platform/coldfire/pit.c b/arch/m68k/platform/coldfire/pit.c
> index c2b9809..02663d2 100644
> --- a/arch/m68k/platform/coldfire/pit.c
> +++ b/arch/m68k/platform/coldfire/pit.c
> @@ -144,7 +144,6 @@ static struct clocksource pit_clk = {
>   	.name	= "pit",
>   	.rating	= 100,
>   	.read	= pit_read_clk,
> -	.shift	= 20,
>   	.mask	= CLOCKSOURCE_MASK(32),
>   };
>
> @@ -162,8 +161,7 @@ void hw_timer_init(void)
>
>   	setup_irq(MCFINT_VECBASE + MCFINT_PIT1,&pit_irq);
>
> -	pit_clk.mult = clocksource_hz2mult(FREQ, pit_clk.shift);
> -	clocksource_register(&pit_clk);
> +	clocksource_register_hz(&pit_clk, FREQ);
>   }
>
>   /***************************************************************************/
> diff --git a/arch/m68k/platform/coldfire/sltimers.c b/arch/m68k/platform/coldfire/sltimers.c
> index 6a85daf..b7f822b 100644
> --- a/arch/m68k/platform/coldfire/sltimers.c
> +++ b/arch/m68k/platform/coldfire/sltimers.c
> @@ -114,7 +114,6 @@ static struct clocksource mcfslt_clk = {
>   	.name	= "slt",
>   	.rating	= 250,
>   	.read	= mcfslt_read_clk,
> -	.shift	= 20,
>   	.mask	= CLOCKSOURCE_MASK(32),
>   	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
>   };
> @@ -136,8 +135,7 @@ void hw_timer_init(void)
>
>   	setup_irq(MCF_IRQ_TIMER,&mcfslt_timer_irq);
>
> -	mcfslt_clk.mult = clocksource_hz2mult(MCF_BUSCLK, mcfslt_clk.shift);
> -	clocksource_register(&mcfslt_clk);
> +	clocksource_register_hz(&mcfslt_clk, MCF_BUSCLK);
>
>   #ifdef CONFIG_HIGHPROFILE
>   	mcfslt_profile_init();
> diff --git a/arch/m68k/platform/coldfire/timers.c b/arch/m68k/platform/coldfire/timers.c
> index 60242f6..0d90da3 100644
> --- a/arch/m68k/platform/coldfire/timers.c
> +++ b/arch/m68k/platform/coldfire/timers.c
> @@ -88,7 +88,6 @@ static struct clocksource mcftmr_clk = {
>   	.name	= "tmr",
>   	.rating	= 250,
>   	.read	= mcftmr_read_clk,
> -	.shift	= 20,
>   	.mask	= CLOCKSOURCE_MASK(32),
>   	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
>   };
> @@ -109,8 +108,7 @@ void hw_timer_init(void)
>   	__raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 |
>   		MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, TA(MCFTIMER_TMR));
>
> -	mcftmr_clk.mult = clocksource_hz2mult(FREQ, mcftmr_clk.shift);
> -	clocksource_register(&mcftmr_clk);
> +	clocksource_register_hz(&mcftmr_clk, FREQ);
>
>   	setup_irq(MCF_IRQ_TIMER,&mcftmr_timer_irq);
>
>
>
>


-- 
------------------------------------------------------------------------
Greg Ungerer  --  Principal Engineer        EMAIL:     gerg@snapgear.com
SnapGear Group, McAfee                      PHONE:       +61 7 3435 2888
8 Gardner Close                             FAX:         +61 7 3217 5323
Milton, QLD, 4064, Australia                WEB: http://www.SnapGear.com