From: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com>
To: Venkatesh Pallipadi <venki@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>,
Andrew Morton <akpm@linux-foundation.org>,
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>,
Mike Travis <travis@sgi.com>,
"Paul E. McKenney" <paul.mckenney@linaro.org>,
"Rafael J. Wysocki" <rjw@sisk.pl>,
Paul Gortmaker <paul.gortmaker@windriver.com>,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] Avoid mask based num_possible_cpus and num_online_cpus -v3
Date: Wed, 25 Jan 2012 00:52:16 +0530 [thread overview]
Message-ID: <4F1F04E8.6000603@linux.vnet.ibm.com> (raw)
In-Reply-To: <1327372455-1383-1-git-send-email-venki@google.com>
On 01/24/2012 08:04 AM, Venkatesh Pallipadi wrote:
> Kernel's notion of possible cpus (from include/linux/cpumask.h)
> * cpu_possible_mask- has bit 'cpu' set iff cpu is populatable
>
> * The cpu_possible_mask is fixed at boot time, as the set of CPU id's
> * that it is possible might ever be plugged in at anytime during the
> * life of that system boot.
>
> #define num_possible_cpus() cpumask_weight(cpu_possible_mask)
>
> and on x86 cpumask_weight() calls hweight64 and hweight64 (on older kernels
> and systems with !X86_FEATURE_POPCNT) or a popcnt based alternative.
>
> i.e, We needlessly go through this mask based calculation everytime
> num_possible_cpus() is called.
>
> The problem is there with cpu_online_mask() as well, which is fixed value at
> boot time in !CONFIG_HOTPLUG_CPU case and should not change that often even
> in HOTPLUG case.
>
> Though most of the callers of these two routines are init time (with few
> exceptions of runtime calls), it is cleaner to use variables
> and not go through this repeated mask based calculation.
>
> Signed-off-by: Venkatesh Pallipadi <venki@google.com>
> ---
> arch/x86/kernel/smpboot.c | 2 +-
> include/linux/cpumask.h | 10 ++++++++--
> kernel/cpu.c | 5 +++++
> kernel/smp.c | 4 ++++
> 4 files changed, 18 insertions(+), 3 deletions(-)
>
> diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
> index 66d250c..f87fcde 100644
> --- a/arch/x86/kernel/smpboot.c
> +++ b/arch/x86/kernel/smpboot.c
> @@ -947,7 +947,7 @@ static int __init smp_sanity_check(unsigned max_cpus)
> nr++;
> }
>
> - nr_cpu_ids = 8;
> + setup_nr_cpu_ids();
> }
> #endif
>
> diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h
> index 4f7a632..ac3113b 100644
> --- a/include/linux/cpumask.h
> +++ b/include/linux/cpumask.h
> @@ -23,10 +23,14 @@ typedef struct cpumask { DECLARE_BITMAP(bits, NR_CPUS); } cpumask_t;
>
> #if NR_CPUS == 1
> #define nr_cpu_ids 1
> +#define nr_possible_cpus 1
> #else
> extern int nr_cpu_ids;
> +extern int nr_possible_cpus;
> #endif
>
> +extern int nr_online_cpus;
> +
> #ifdef CONFIG_CPUMASK_OFFSTACK
> /* Assuming NR_CPUS is huge, a runtime limit is more efficient. Also,
> * not all bits may be allocated. */
> @@ -81,8 +85,10 @@ extern const struct cpumask *const cpu_present_mask;
> extern const struct cpumask *const cpu_active_mask;
>
> #if NR_CPUS > 1
> -#define num_online_cpus() cpumask_weight(cpu_online_mask)
> -#define num_possible_cpus() cpumask_weight(cpu_possible_mask)
> +
> +#define num_online_cpus() (nr_online_cpus)
> +#define num_possible_cpus() (nr_possible_cpus)
> +
> #define num_present_cpus() cpumask_weight(cpu_present_mask)
> #define num_active_cpus() cpumask_weight(cpu_active_mask)
> #define cpu_online(cpu) cpumask_test_cpu((cpu), cpu_online_mask)
> diff --git a/kernel/cpu.c b/kernel/cpu.c
> index 2060c6e..f179baa 100644
> --- a/kernel/cpu.c
> +++ b/kernel/cpu.c
> @@ -622,6 +622,9 @@ static DECLARE_BITMAP(cpu_active_bits, CONFIG_NR_CPUS) __read_mostly;
> const struct cpumask *const cpu_active_mask = to_cpumask(cpu_active_bits);
> EXPORT_SYMBOL(cpu_active_mask);
>
> +int nr_online_cpus __read_mostly;
> +EXPORT_SYMBOL(nr_online_cpus);
> +
> void set_cpu_possible(unsigned int cpu, bool possible)
> {
> if (possible)
> @@ -644,6 +647,8 @@ void set_cpu_online(unsigned int cpu, bool online)
> cpumask_set_cpu(cpu, to_cpumask(cpu_online_bits));
> else
> cpumask_clear_cpu(cpu, to_cpumask(cpu_online_bits));
> +
> + nr_online_cpus = cpumask_weight(cpu_online_mask);
> }
>
> void set_cpu_active(unsigned int cpu, bool active)
> diff --git a/kernel/smp.c b/kernel/smp.c
> index db197d6..106e519 100644
> --- a/kernel/smp.c
> +++ b/kernel/smp.c
> @@ -658,10 +658,14 @@ early_param("maxcpus", maxcpus);
> int nr_cpu_ids __read_mostly = NR_CPUS;
> EXPORT_SYMBOL(nr_cpu_ids);
>
> +int nr_possible_cpus __read_mostly = NR_CPUS;
> +EXPORT_SYMBOL(nr_possible_cpus);
> +
> /* An arch may set nr_cpu_ids earlier if needed, so this would be redundant */
> void __init setup_nr_cpu_ids(void)
> {
> nr_cpu_ids = find_last_bit(cpumask_bits(cpu_possible_mask),NR_CPUS) + 1;
> + nr_possible_cpus = cpumask_weight(cpu_possible_mask);
> }
>
> /* Called by boot processor to activate the rest. */
This patch still has problems, IMHO.
A quick grep on the source for set_cpu_possible() revealed the following
problematic areas:
1. arch/alpha/kernel/process.c: common_shutdown_1()
set_cpu_possible() with second parameter as 'false' is used here.
Though this is the shutdown code, a disparity between what
num_possible_cpus() reports and what is actually there in
cpu_possible_mask is not such a good idea, at any point in time.
2. arch/cris/arch-v32/kernel/smp.c: smp_prepare_boot_cpu()
smp_prepare_boot_cpu() is called after setup_nr_cpu_ids().
(Btw, I think things are really messed up in cris as it is, if I am not
totally mistaken).
3. arch/mn10300/kernel/smp.c: smp_prepare_cpus()
This function calls set_cpu_possible(). smp_prepare_cpus() is called in
kernel_init(), which is much later than setup_nr_cpu_ids().
4. arch/um/kernel/smp.c: smp_prepare_cpus()
Same as in 3.
5. As far as arch/x86/xen is concerned, I can see code such as the following,
among other things:
xen_smp_prepare_cpus():
/* Restrict the possible_map according to max_cpus. */
while ((num_possible_cpus() > 1) && (num_possible_cpus() > max_cpus)) {
for (cpu = nr_cpu_ids - 1; !cpu_possible(cpu); cpu--)
continue;
set_cpu_possible(cpu, false);
}
If I am not missing anything obvious, applying this patch can effectively
convert the above code into an infinite loop, among other damages!
I still feel it would be safer to edit set_cpu_possible() such that
nr_possible_cpus is updated whenever cpu_possible_mask is altered.
Regards,
Srivatsa S. Bhat
IBM Linux Technology Center
next prev parent reply other threads:[~2012-01-24 19:22 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-18 2:07 [PATCH] Avoid mask based num_possible_cpus and num_online_cpus Venkatesh Pallipadi
2012-01-18 5:55 ` KOSAKI Motohiro
2012-01-18 18:52 ` Venki Pallipadi
2012-01-18 19:20 ` KOSAKI Motohiro
2012-01-19 20:01 ` Venkatesh Pallipadi
2012-01-19 20:40 ` KOSAKI Motohiro
2012-01-21 1:01 ` Venki Pallipadi
2012-01-19 20:43 ` Srivatsa S. Bhat
2012-01-20 23:09 ` Venki Pallipadi
2012-01-20 23:45 ` KOSAKI Motohiro
2012-01-20 23:55 ` Venki Pallipadi
2012-01-23 5:22 ` Srivatsa S. Bhat
2012-01-23 19:28 ` Venki Pallipadi
2012-01-24 2:34 ` [PATCH] Avoid mask based num_possible_cpus and num_online_cpus -v3 Venkatesh Pallipadi
2012-01-24 19:22 ` Srivatsa S. Bhat [this message]
2012-01-24 19:30 ` KOSAKI Motohiro
2012-01-24 21:01 ` Venki Pallipadi
2012-01-24 23:25 ` [PATCH] Avoid mask based num_possible_cpus and num_online_cpus -v4 Venkatesh Pallipadi
2012-01-26 17:22 ` Srivatsa S. Bhat
2012-01-26 17:27 ` Srivatsa S. Bhat
2012-01-26 21:25 ` KOSAKI Motohiro
2012-01-26 23:22 ` Andrew Morton
2012-01-27 23:58 ` Venki Pallipadi
2012-02-01 0:17 ` [PATCH] Avoid mask based num_possible_cpus and num_online_cpus -v5 Venkatesh Pallipadi
2012-02-01 22:01 ` Andrew Morton
2012-02-02 20:03 ` Rusty Russell
2012-02-02 20:19 ` Andrew Morton
2012-02-02 21:00 ` Venki Pallipadi
2012-02-13 19:54 ` Tony Luck
2012-02-13 20:04 ` Venki Pallipadi
2012-02-13 20:25 ` Srivatsa S. Bhat
2012-02-13 20:43 ` Venki Pallipadi
2012-02-13 20:55 ` Srivatsa S. Bhat
2012-02-13 20:44 ` Srivatsa S. Bhat
2012-02-13 21:57 ` Tony Luck
2012-02-14 9:25 ` Rusty Russell
2012-02-14 21:35 ` Srivatsa S. Bhat
2012-02-14 23:00 ` Tony Luck
2012-02-14 22:49 ` [PATCH 0/3] Cleanup raw handling of online/possible map Venkatesh Pallipadi
2012-02-14 22:49 ` [PATCH 1/3] hexagon: Avoid raw handling of cpu_possible_map Venkatesh Pallipadi
2012-02-14 22:49 ` [PATCH 2/3] mips: Avoid raw handling of cpu_possible_map/cpu_online_map Venkatesh Pallipadi
2012-02-27 22:19 ` David Daney
2012-02-14 22:49 ` [PATCH 3/3] um: Avoid raw handling of cpu_online_map Venkatesh Pallipadi
2012-02-27 21:55 ` [PATCH] Avoid mask based num_possible_cpus and num_online_cpus -v5 David Daney
2012-02-27 22:07 ` Andrew Morton
2012-02-27 22:16 ` David Daney
2012-03-01 18:32 ` Venki Pallipadi
2012-02-28 5:01 ` Stephen Rothwell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F1F04E8.6000603@linux.vnet.ibm.com \
--to=srivatsa.bhat@linux.vnet.ibm.com \
--cc=akpm@linux-foundation.org \
--cc=kosaki.motohiro@gmail.com \
--cc=kosaki.motohiro@jp.fujitsu.com \
--cc=linux-kernel@vger.kernel.org \
--cc=paul.gortmaker@windriver.com \
--cc=paul.mckenney@linaro.org \
--cc=rjw@sisk.pl \
--cc=travis@sgi.com \
--cc=venki@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).