* [PATCH] scsi : Adding all the definitions of host bytes in hostbyte_table
@ 2012-02-02 15:27 Moger, Babu
2012-02-02 17:43 ` [dm-devel] " Hannes Reinecke
0 siblings, 1 reply; 2+ messages in thread
From: Moger, Babu @ 2012-02-02 15:27 UTC (permalink / raw)
To: linux-kernel@vger.kernel.org; +Cc: device-mapper development
Resubmitting it again(Probably last one had some format issues).
Adding all the definitions of host bytes in hostbyte_table.
Without this patch, scsi_show_result prints hostbyte as invalid
for statuses that are not defined in hostbyte_table(when scsi logging is enabled).
Look at scsi_print_result function for better understanding.
Signed-off-by: Babu Moger <babu.moger@netapp.com>
---
--- linux-3.1-rc4/drivers/scsi/constants.c.orig 2012-01-12 15:21:28.000000000 -0600
+++ linux-3.1-rc4/drivers/scsi/constants.c 2012-01-12 15:25:07.000000000 -0600
@@ -1422,7 +1422,8 @@ static const char * const hostbyte_table
"DID_OK", "DID_NO_CONNECT", "DID_BUS_BUSY", "DID_TIME_OUT", "DID_BAD_TARGET",
"DID_ABORT", "DID_PARITY", "DID_ERROR", "DID_RESET", "DID_BAD_INTR",
"DID_PASSTHROUGH", "DID_SOFT_ERROR", "DID_IMM_RETRY", "DID_REQUEUE",
-"DID_TRANSPORT_DISRUPTED", "DID_TRANSPORT_FAILFAST" };
+"DID_TRANSPORT_DISRUPTED", "DID_TRANSPORT_FAILFAST", "DID_TARGET_FAILURE",
+"DID_NEXUS_FAILURE" };
#define NUM_HOSTBYTE_STRS ARRAY_SIZE(hostbyte_table)
static const char * const driverbyte_table[]={
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [dm-devel] [PATCH] scsi : Adding all the definitions of host bytes in hostbyte_table
2012-02-02 15:27 [PATCH] scsi : Adding all the definitions of host bytes in hostbyte_table Moger, Babu
@ 2012-02-02 17:43 ` Hannes Reinecke
0 siblings, 0 replies; 2+ messages in thread
From: Hannes Reinecke @ 2012-02-02 17:43 UTC (permalink / raw)
To: device-mapper development; +Cc: Moger, Babu, linux-kernel@vger.kernel.org
On 02/02/2012 04:27 PM, Moger, Babu wrote:
> Resubmitting it again(Probably last one had some format issues).
> Adding all the definitions of host bytes in hostbyte_table.
>
> Without this patch, scsi_show_result prints hostbyte as invalid
> for statuses that are not defined in hostbyte_table(when scsi logging is enabled).
>
> Look at scsi_print_result function for better understanding.
>
> Signed-off-by: Babu Moger<babu.moger@netapp.com>
Acked-by: Hannes Reinecke <hare@suse.de>
Cheers,
Hannes
--
Dr. Hannes Reinecke zSeries & Storage
hare@suse.de +49 911 74053 688
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: Markus Rex, HRB 16746 (AG Nürnberg)
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2012-02-02 15:43 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-02-02 15:27 [PATCH] scsi : Adding all the definitions of host bytes in hostbyte_table Moger, Babu
2012-02-02 17:43 ` [dm-devel] " Hannes Reinecke
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox