* [PATCH v3 1/2] block: IOCTL support for Sanitize in eMMC v4.5 [not found] <1329832825-8844-1-git-send-email-ygardi@codeaurora.org> @ 2012-02-21 14:00 ` Yaniv Gardi 2012-02-21 14:00 ` [PATCH v3 2/2] mmc: card: Adding " Yaniv Gardi 1 sibling, 0 replies; 7+ messages in thread From: Yaniv Gardi @ 2012-02-21 14:00 UTC (permalink / raw) To: linux-mmc; +Cc: linux-arm-msm, axboe, ygardi, open list Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> --- block/blk-core.c | 15 ++++++++++++--- block/blk-lib.c | 44 ++++++++++++++++++++++++++++++++++++++++++++ block/blk-merge.c | 6 ++++++ block/elevator.c | 8 +++++++- block/ioctl.c | 9 +++++++++ include/linux/blk_types.h | 6 ++++-- include/linux/blkdev.h | 3 +++ include/linux/fs.h | 1 + kernel/trace/blktrace.c | 2 ++ 9 files changed, 88 insertions(+), 6 deletions(-) diff --git a/block/blk-core.c b/block/blk-core.c index e6c05a9..150ea4a 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -1544,7 +1544,7 @@ generic_make_request_checks(struct bio *bio) goto end_io; } - if (unlikely(!(bio->bi_rw & REQ_DISCARD) && + if (unlikely(!(bio->bi_rw & (REQ_DISCARD | REQ_SANITIZE)) && nr_sectors > queue_max_hw_sectors(q))) { printk(KERN_ERR "bio too big device %s (%u > %u)\n", bdevname(bio->bi_bdev, b), @@ -1592,6 +1592,14 @@ generic_make_request_checks(struct bio *bio) goto end_io; } + if ((bio->bi_rw & REQ_SANITIZE) && + (!blk_queue_sanitize(q))) { + pr_err("%s - SANITIZE request but queue " + "doesn't support sanitize", __func__); + err = -EOPNOTSUPP; + goto end_io; + } + if (blk_throtl_bio(q, bio)) return false; /* throttled, will be resubmitted later */ @@ -1697,7 +1705,8 @@ void submit_bio(int rw, struct bio *bio) * If it's a regular read/write or a barrier with data attached, * go through the normal accounting stuff before submission. */ - if (bio_has_data(bio) && !(rw & REQ_DISCARD)) { + if (bio_has_data(bio) && + (!(rw & (REQ_DISCARD | REQ_SANITIZE)))) { if (rw & WRITE) { count_vm_events(PGPGOUT, count); } else { @@ -1743,7 +1752,7 @@ EXPORT_SYMBOL(submit_bio); */ int blk_rq_check_limits(struct request_queue *q, struct request *rq) { - if (rq->cmd_flags & REQ_DISCARD) + if (rq->cmd_flags & (REQ_DISCARD | REQ_SANITIZE)) return 0; if (blk_rq_sectors(rq) > queue_max_sectors(q) || diff --git a/block/blk-lib.c b/block/blk-lib.c index 2b461b4..1aef2fb 100644 --- a/block/blk-lib.c +++ b/block/blk-lib.c @@ -114,6 +114,50 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector, } EXPORT_SYMBOL(blkdev_issue_discard); +int blkdev_issue_sanitize(struct block_device *bdev, gfp_t gfp_mask) +{ + DECLARE_COMPLETION_ONSTACK(wait); + struct request_queue *q = bdev_get_queue(bdev); + int type = REQ_WRITE | REQ_SANITIZE; + + struct bio_batch bb; + struct bio *bio; + int ret = 0; + + if (!q) + return -ENXIO; + + if (!blk_queue_sanitize(q)) { + pr_err("%s - card doesn't support sanitize", __func__); + return -EOPNOTSUPP; + } + + bio = bio_alloc(gfp_mask, 1); + if (!bio) + return -ENOMEM; + + atomic_set(&bb.done, 1); + bb.flags = 1 << BIO_UPTODATE; + bb.wait = &wait; + + bio->bi_end_io = bio_batch_end_io; + bio->bi_bdev = bdev; + bio->bi_private = &bb; + + atomic_inc(&bb.done); + submit_bio(type, bio); + + /* Wait for bios in-flight */ + if (!atomic_dec_and_test(&bb.done)) + wait_for_completion(&wait); + + if (!test_bit(BIO_UPTODATE, &bb.flags)) + ret = -EIO; + + return ret; +} +EXPORT_SYMBOL(blkdev_issue_sanitize); + /** * blkdev_issue_zeroout - generate number of zero filed write bios * @bdev: blockdev to issue diff --git a/block/blk-merge.c b/block/blk-merge.c index cfcc37c..f3ed15b 100644 --- a/block/blk-merge.c +++ b/block/blk-merge.c @@ -383,6 +383,12 @@ static int attempt_merge(struct request_queue *q, struct request *req, return 0; /* + * Don't merge file system requests and sanitize requests + */ + if ((req->cmd_flags & REQ_SANITIZE) != (next->cmd_flags & REQ_SANITIZE)) + return 0; + + /* * not contiguous */ if (blk_rq_pos(req) + blk_rq_sectors(req) != blk_rq_pos(next)) diff --git a/block/elevator.c b/block/elevator.c index 99838f4..4255dd9 100644 --- a/block/elevator.c +++ b/block/elevator.c @@ -88,6 +88,12 @@ int elv_rq_merge_ok(struct request *rq, struct bio *bio) return 0; /* + * Don't merge sanitize requests + */ + if ((bio->bi_rw & REQ_SANITIZE) != (rq->bio->bi_rw & REQ_SANITIZE)) + return 0; + + /* * different data direction or already started, don't merge */ if (bio_data_dir(bio) != rq_data_dir(rq)) @@ -647,7 +653,7 @@ void __elv_add_request(struct request_queue *q, struct request *rq, int where) if (rq->cmd_flags & REQ_SOFTBARRIER) { /* barriers are scheduling boundary, update end_sector */ if (rq->cmd_type == REQ_TYPE_FS || - (rq->cmd_flags & REQ_DISCARD)) { + (rq->cmd_flags & (REQ_DISCARD | REQ_SANITIZE))) { q->end_sector = rq_end_sector(rq); q->boundary_rq = rq; } diff --git a/block/ioctl.c b/block/ioctl.c index ca939fc..eed6dbb 100644 --- a/block/ioctl.c +++ b/block/ioctl.c @@ -132,6 +132,11 @@ static int blk_ioctl_discard(struct block_device *bdev, uint64_t start, return blkdev_issue_discard(bdev, start, len, GFP_KERNEL, flags); } +static int blk_ioctl_sanitize(struct block_device *bdev) +{ + return blkdev_issue_sanitize(bdev, GFP_KERNEL); +} + static int put_ushort(unsigned long arg, unsigned short val) { return put_user(val, (unsigned short __user *)arg); @@ -216,6 +221,10 @@ int blkdev_ioctl(struct block_device *bdev, fmode_t mode, unsigned cmd, set_device_ro(bdev, n); return 0; + case BLKSANITIZE: + ret = blk_ioctl_sanitize(bdev); + break; + case BLKDISCARD: case BLKSECDISCARD: { uint64_t range[2]; diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h index 4053cbd..bbe4976 100644 --- a/include/linux/blk_types.h +++ b/include/linux/blk_types.h @@ -150,6 +150,7 @@ enum rq_flag_bits { __REQ_FLUSH_SEQ, /* request for flush sequence */ __REQ_IO_STAT, /* account I/O stat */ __REQ_MIXED_MERGE, /* merge of different types, fail separately */ + __REQ_SANITIZE, /* sanitize */ __REQ_NR_BITS, /* stops here */ }; @@ -161,13 +162,14 @@ enum rq_flag_bits { #define REQ_META (1 << __REQ_META) #define REQ_PRIO (1 << __REQ_PRIO) #define REQ_DISCARD (1 << __REQ_DISCARD) +#define REQ_SANITIZE (1 << __REQ_SANITIZE) #define REQ_NOIDLE (1 << __REQ_NOIDLE) #define REQ_FAILFAST_MASK \ (REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | REQ_FAILFAST_DRIVER) #define REQ_COMMON_MASK \ - (REQ_WRITE | REQ_FAILFAST_MASK | REQ_SYNC | REQ_META | REQ_PRIO | \ - REQ_DISCARD | REQ_NOIDLE | REQ_FLUSH | REQ_FUA | REQ_SECURE) + (REQ_WRITE | REQ_FAILFAST_MASK | REQ_SYNC | REQ_META | REQ_DISCARD | \ + REQ_NOIDLE | REQ_FLUSH | REQ_FUA | REQ_SECURE | REQ_SANITIZE) #define REQ_CLONE_MASK REQ_COMMON_MASK #define REQ_RAHEAD (1 << __REQ_RAHEAD) diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 7084318..1197c31 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -423,6 +423,7 @@ struct request_queue { #define QUEUE_FLAG_ADD_RANDOM 16 /* Contributes to random pool */ #define QUEUE_FLAG_SECDISCARD 17 /* supports SECDISCARD */ #define QUEUE_FLAG_SAME_FORCE 18 /* force complete on same CPU */ +#define QUEUE_FLAG_SANITIZE 19 /* supports SANITIZE */ #define QUEUE_FLAG_DEFAULT ((1 << QUEUE_FLAG_IO_STAT) | \ (1 << QUEUE_FLAG_STACKABLE) | \ @@ -506,6 +507,7 @@ static inline void queue_flag_clear(unsigned int flag, struct request_queue *q) #define blk_queue_stackable(q) \ test_bit(QUEUE_FLAG_STACKABLE, &(q)->queue_flags) #define blk_queue_discard(q) test_bit(QUEUE_FLAG_DISCARD, &(q)->queue_flags) +#define blk_queue_sanitize(q) test_bit(QUEUE_FLAG_SANITIZE, &(q)->queue_flags) #define blk_queue_secdiscard(q) (blk_queue_discard(q) && \ test_bit(QUEUE_FLAG_SECDISCARD, &(q)->queue_flags)) @@ -955,6 +957,7 @@ static inline struct request *blk_map_queue_find_tag(struct blk_queue_tag *bqt, extern int blkdev_issue_flush(struct block_device *, gfp_t, sector_t *); extern int blkdev_issue_discard(struct block_device *bdev, sector_t sector, sector_t nr_sects, gfp_t gfp_mask, unsigned long flags); +extern int blkdev_issue_sanitize(struct block_device *bdev, gfp_t gfp_mask); extern int blkdev_issue_zeroout(struct block_device *bdev, sector_t sector, sector_t nr_sects, gfp_t gfp_mask); static inline int sb_issue_discard(struct super_block *sb, sector_t block, diff --git a/include/linux/fs.h b/include/linux/fs.h index 057434a..3680eef 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -319,6 +319,7 @@ struct inodes_stat_t { #define BLKPBSZGET _IO(0x12,123) #define BLKDISCARDZEROES _IO(0x12,124) #define BLKSECDISCARD _IO(0x12,125) +#define BLKSANITIZE _IO(0x12, 126) #define BMAP_IOCTL 1 /* obsolete - kept for compatibility */ #define FIBMAP _IO(0x00,1) /* bmap access */ diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c index 16fc34a..2c2efc6 100644 --- a/kernel/trace/blktrace.c +++ b/kernel/trace/blktrace.c @@ -1802,6 +1802,8 @@ void blk_fill_rwbs(char *rwbs, u32 rw, int bytes) rwbs[i++] = 'W'; else if (rw & REQ_DISCARD) rwbs[i++] = 'D'; + else if (rw & REQ_SANITIZE) + rwbs[i++] = 'Z'; else if (bytes) rwbs[i++] = 'R'; else -- 1.7.6 -- Sent by a consultant of the Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum ^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH v3 2/2] mmc: card: Adding support for Sanitize in eMMC v4.5 [not found] <1329832825-8844-1-git-send-email-ygardi@codeaurora.org> 2012-02-21 14:00 ` [PATCH v3 1/2] block: IOCTL support for Sanitize in eMMC v4.5 Yaniv Gardi @ 2012-02-21 14:00 ` Yaniv Gardi 2012-02-21 18:04 ` Stephen Boyd 2012-02-22 6:09 ` Jaehoon Chung 1 sibling, 2 replies; 7+ messages in thread From: Yaniv Gardi @ 2012-02-21 14:00 UTC (permalink / raw) To: linux-mmc; +Cc: linux-arm-msm, axboe, ygardi, open list Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> --- drivers/mmc/card/block.c | 58 ++++++++++++++++++++++++++++++++++++++------- drivers/mmc/card/queue.c | 12 ++++++++- include/linux/mmc/card.h | 7 +++++ include/linux/mmc/host.h | 1 + 4 files changed, 68 insertions(+), 10 deletions(-) diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index 0c959c9..5be77e6 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -830,6 +830,9 @@ static int mmc_blk_issue_discard_rq(struct mmc_queue *mq, struct request *req) from = blk_rq_pos(req); nr = blk_rq_sectors(req); + /* 1ST priority is DISCARD. + 2ND is TRIM + 3RD is ERASE */ if (mmc_can_discard(card)) arg = MMC_DISCARD_ARG; else if (mmc_can_trim(card)) @@ -868,18 +871,11 @@ static int mmc_blk_issue_secdiscard_rq(struct mmc_queue *mq, unsigned int from, nr, arg; int err = 0, type = MMC_BLK_SECDISCARD; - if (!(mmc_can_secure_erase_trim(card) || mmc_can_sanitize(card))) { + if (!(mmc_can_secure_erase_trim(card))) { err = -EOPNOTSUPP; goto out; } - /* The sanitize operation is supported at v4.5 only */ - if (mmc_can_sanitize(card)) { - err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, - EXT_CSD_SANITIZE_START, 1, 0); - goto out; - } - from = blk_rq_pos(req); nr = blk_rq_sectors(req); @@ -922,6 +918,44 @@ out: return err ? 0 : 1; } +int mmc_blk_issue_sanitize_rq(struct mmc_queue *mq, + struct request *req) +{ + struct mmc_blk_data *md = mq->data; + struct mmc_card *card = md->queue.card; + int err = 0; + + if (!(mmc_can_sanitize(card) && (mq->card->host->caps2 & MMC_CAP2_SANITIZE))) { + pr_err("%s: SANITIZE is not supported", __func__); + err = -EOPNOTSUPP; + goto out; + } + + pr_info("%s: SANITIZE is supported", __func__); + + mmc_sd_card_set_sanitize_in_progress(card); + + pr_info("%s: issueing SANITIZE command...", __func__); + + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_SANITIZE_START, 1, 0); + + pr_info("%s: SANITIZE command returned...", __func__); + + if (err) + pr_err("%s: mmcblk: mmc_switch() failed. err=%d\n", + __func__, err); + + mmc_sd_card_set_sanitize_completed(card); + +out: + spin_lock_irq(&md->lock); + __blk_end_request(req, err, blk_rq_bytes(req)); + spin_unlock_irq(&md->lock); + + return err ? 0 : 1; +} + static int mmc_blk_issue_flush(struct mmc_queue *mq, struct request *req) { struct mmc_blk_data *md = mq->data; @@ -1379,7 +1413,12 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) goto out; } - if (req && req->cmd_flags & REQ_DISCARD) { + if (req && req->cmd_flags & REQ_SANITIZE) { + /* complete ongoing async transfer before issuing discard */ + if (card->host && card->host->areq) + mmc_blk_issue_rw_rq(mq, NULL); + ret = mmc_blk_issue_sanitize_rq(mq, req); + } else if (req && req->cmd_flags & REQ_DISCARD) { /* complete ongoing async transfer before issuing discard */ if (card->host->areq) mmc_blk_issue_rw_rq(mq, NULL); @@ -1396,6 +1435,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) ret = mmc_blk_issue_rw_rq(mq, req); } + out: if (!req) /* release host only when there are no more requests */ diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c index dcad59c..6946ac1 100644 --- a/drivers/mmc/card/queue.c +++ b/drivers/mmc/card/queue.c @@ -140,10 +140,15 @@ static void mmc_queue_setup_discard(struct request_queue *q, /* granularity must not be greater than max. discard */ if (card->pref_erase > max_discard) q->limits.discard_granularity = 0; - if (mmc_can_secure_erase_trim(card) || mmc_can_sanitize(card)) + if (mmc_can_secure_erase_trim(card)) queue_flag_set_unlocked(QUEUE_FLAG_SECDISCARD, q); } +static void mmc_queue_setup_sanitize(struct request_queue *q) +{ + queue_flag_set_unlocked(QUEUE_FLAG_SANITIZE, q); +} + /** * mmc_init_queue - initialise a queue structure. * @mq: mmc queue @@ -181,6 +186,11 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, if (mmc_can_erase(card)) mmc_queue_setup_discard(mq->queue, card); + if ((mmc_can_sanitize(card) && (host->caps2 & MMC_CAP2_SANITIZE))) + mmc_queue_setup_sanitize(mq->queue); + else + pr_info("%s - card doesn't support sanitize", __func__); + #ifdef CONFIG_MMC_BLOCK_BOUNCE if (host->max_segs == 1) { unsigned int bouncesz; diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index 9478a6b..0890e9c 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -236,6 +236,9 @@ struct mmc_card { #define MMC_POWEROFF_SHORT 2 #define MMC_POWEROFF_LONG 3 +/* card is in sanitize progress */ +#define MMC_STATE_SANITIZE_IN_PROGRESS (1<<9) + unsigned int erase_size; /* erase size in sectors */ unsigned int erase_shift; /* if erase unit is power 2 */ unsigned int pref_erase; /* in sectors */ @@ -388,6 +391,10 @@ static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data) #define mmc_card_set_ddr_mode(c) ((c)->state |= MMC_STATE_HIGHSPEED_DDR) #define mmc_card_set_uhs(c) ((c)->state |= MMC_STATE_ULTRAHIGHSPEED) #define mmc_sd_card_set_uhs(c) ((c)->state |= MMC_STATE_ULTRAHIGHSPEED) +#define mmc_sd_card_set_sanitize_in_progress(c) ((c)->state |= \ + MMC_STATE_SANITIZE_IN_PROGRESS) +#define mmc_sd_card_set_sanitize_completed(c) ((c)->state &= \ + ~MMC_STATE_SANITIZE_IN_PROGRESS) #define mmc_card_set_ext_capacity(c) ((c)->state |= MMC_CARD_SDXC) #define mmc_card_set_removed(c) ((c)->state |= MMC_CARD_REMOVED) diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 9a03d03..93210aa 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -242,6 +242,7 @@ struct mmc_host { #define MMC_CAP2_CACHE_CTRL (1 << 1) /* Allow cache control */ #define MMC_CAP2_POWEROFF_NOTIFY (1 << 2) /* Notify poweroff supported */ #define MMC_CAP2_NO_MULTI_READ (1 << 3) /* Multiblock reads don't work */ +#define MMC_CAP2_SANITIZE (1<<4) /* Support Sanitize */ mmc_pm_flag_t pm_caps; /* supported pm features */ unsigned int power_notify_type; -- 1.7.6 -- Sent by a consultant of the Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum ^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH v3 2/2] mmc: card: Adding support for Sanitize in eMMC v4.5 2012-02-21 14:00 ` [PATCH v3 2/2] mmc: card: Adding " Yaniv Gardi @ 2012-02-21 18:04 ` Stephen Boyd 2012-02-26 9:35 ` Yaniv Gardi 2012-02-22 6:09 ` Jaehoon Chung 1 sibling, 1 reply; 7+ messages in thread From: Stephen Boyd @ 2012-02-21 18:04 UTC (permalink / raw) To: Yaniv Gardi; +Cc: linux-mmc, linux-arm-msm, axboe, open list On 02/21/12 06:00, Yaniv Gardi wrote: > @@ -922,6 +918,44 @@ out: > return err ? 0 : 1; > } > > +int mmc_blk_issue_sanitize_rq(struct mmc_queue *mq, > + struct request *req) > +{ > + struct mmc_blk_data *md = mq->data; > + struct mmc_card *card = md->queue.card; > + int err = 0; > + > + if (!(mmc_can_sanitize(card) && (mq->card->host->caps2 & MMC_CAP2_SANITIZE))) { > + pr_err("%s: SANITIZE is not supported", __func__); > + err = -EOPNOTSUPP; > + goto out; > + } > + > + pr_info("%s: SANITIZE is supported", __func__); These look like debug printks. Please remove them. > + > + mmc_sd_card_set_sanitize_in_progress(card); > + > + pr_info("%s: issueing SANITIZE command...", __func__); > + > + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, > + EXT_CSD_SANITIZE_START, 1, 0); > + > + pr_info("%s: SANITIZE command returned...", __func__); > + > + if (err) > + pr_err("%s: mmcblk: mmc_switch() failed. err=%d\n", > + __func__, err); > + > + mmc_sd_card_set_sanitize_completed(card); > + > +out: > + spin_lock_irq(&md->lock); > + __blk_end_request(req, err, blk_rq_bytes(req)); > + spin_unlock_irq(&md->lock); > + > + return err ? 0 : 1; > +} > + > static int mmc_blk_issue_flush(struct mmc_queue *mq, struct request *req) > { > struct mmc_blk_data *md = mq->data; > @@ -181,6 +186,11 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, > if (mmc_can_erase(card)) > mmc_queue_setup_discard(mq->queue, card); > > + if ((mmc_can_sanitize(card) && (host->caps2 & MMC_CAP2_SANITIZE))) > + mmc_queue_setup_sanitize(mq->queue); > + else > + pr_info("%s - card doesn't support sanitize", __func__); debug printk again? Sent by an employee of the Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum. ^ permalink raw reply [flat|nested] 7+ messages in thread
* RE: [PATCH v3 2/2] mmc: card: Adding support for Sanitize in eMMC v4.5 2012-02-21 18:04 ` Stephen Boyd @ 2012-02-26 9:35 ` Yaniv Gardi 0 siblings, 0 replies; 7+ messages in thread From: Yaniv Gardi @ 2012-02-26 9:35 UTC (permalink / raw) To: 'Stephen Boyd' Cc: linux-mmc, linux-arm-msm, axboe, 'open list' = > -----Original Message----- = > From: Stephen Boyd [mailto:sboyd@codeaurora.org] = > Sent: Tuesday, February 21, 2012 8:05 PM = > To: Yaniv Gardi = > Cc: linux-mmc@vger.kernel.org; linux-arm-msm@vger.kernel.org; = > axboe@kernel.dk; open list = > Subject: Re: [PATCH v3 2/2] mmc: card: Adding support for Sanitize in = > eMMC v4.5 = > = > On 02/21/12 06:00, Yaniv Gardi wrote: = > > @@ -922,6 +918,44 @@ out: = > > return err ? 0 : 1; = > > } = > > = > > +int mmc_blk_issue_sanitize_rq(struct mmc_queue *mq, = > > + struct request *req) = > > +{ = > > + struct mmc_blk_data *md = mq->data; = > > + struct mmc_card *card = md->queue.card; = > > + int err = 0; = > > + = > > + if (!(mmc_can_sanitize(card) && (mq->card->host->caps2 & = > MMC_CAP2_SANITIZE))) { = > > + pr_err("%s: SANITIZE is not supported", __func__); = > > + err = -EOPNOTSUPP; = > > + goto out; = > > + } = > > + = > > + pr_info("%s: SANITIZE is supported", __func__); = > = > These look like debug printks. Please remove them. Printout Removed. = > = > > + = > > + mmc_sd_card_set_sanitize_in_progress(card); = > > + = > > + pr_info("%s: issueing SANITIZE command...", __func__); = > > + = > > + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, = > > + EXT_CSD_SANITIZE_START, 1, 0); = > > + = > > + pr_info("%s: SANITIZE command returned...", __func__); = > > + = > > + if (err) = > > + pr_err("%s: mmcblk: mmc_switch() failed. err=%d\n", = > > + __func__, err); = > > + = > > + mmc_sd_card_set_sanitize_completed(card); = > > + = > > +out: = > > + spin_lock_irq(&md->lock); = > > + __blk_end_request(req, err, blk_rq_bytes(req)); = > > + spin_unlock_irq(&md->lock); = > > + = > > + return err ? 0 : 1; = > > +} = > > + = > > static int mmc_blk_issue_flush(struct mmc_queue *mq, struct = > request *req) = > > { = > > struct mmc_blk_data *md = mq->data; = > > @@ -181,6 +186,11 @@ int mmc_init_queue(struct mmc_queue *mq, = > struct mmc_card *card, = > > if (mmc_can_erase(card)) = > > mmc_queue_setup_discard(mq->queue, card); = > > = > > + if ((mmc_can_sanitize(card) && (host->caps2 & = > MMC_CAP2_SANITIZE))) = > > + mmc_queue_setup_sanitize(mq->queue); = > > + else = > > + pr_info("%s - card doesn't support sanitize", __func__); = > = > debug printk again? Printout removed. = > = > Sent by an employee of the Qualcomm Innovation Center, Inc. = > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora = > Forum. ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v3 2/2] mmc: card: Adding support for Sanitize in eMMC v4.5 2012-02-21 14:00 ` [PATCH v3 2/2] mmc: card: Adding " Yaniv Gardi 2012-02-21 18:04 ` Stephen Boyd @ 2012-02-22 6:09 ` Jaehoon Chung 2012-02-26 9:37 ` Yaniv Gardi 1 sibling, 1 reply; 7+ messages in thread From: Jaehoon Chung @ 2012-02-22 6:09 UTC (permalink / raw) To: Yaniv Gardi; +Cc: linux-mmc, linux-arm-msm, axboe, open list On 02/21/2012 11:00 PM, Yaniv Gardi wrote: > Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> > > --- > drivers/mmc/card/block.c | 58 ++++++++++++++++++++++++++++++++++++++------- > drivers/mmc/card/queue.c | 12 ++++++++- > include/linux/mmc/card.h | 7 +++++ > include/linux/mmc/host.h | 1 + > 4 files changed, 68 insertions(+), 10 deletions(-) > > diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c > index 0c959c9..5be77e6 100644 > --- a/drivers/mmc/card/block.c > +++ b/drivers/mmc/card/block.c > @@ -830,6 +830,9 @@ static int mmc_blk_issue_discard_rq(struct mmc_queue *mq, struct request *req) > from = blk_rq_pos(req); > nr = blk_rq_sectors(req); > > + /* 1ST priority is DISCARD. > + 2ND is TRIM > + 3RD is ERASE */ > if (mmc_can_discard(card)) > arg = MMC_DISCARD_ARG; > else if (mmc_can_trim(card)) > @@ -868,18 +871,11 @@ static int mmc_blk_issue_secdiscard_rq(struct mmc_queue *mq, > unsigned int from, nr, arg; > int err = 0, type = MMC_BLK_SECDISCARD; > > - if (!(mmc_can_secure_erase_trim(card) || mmc_can_sanitize(card))) { > + if (!(mmc_can_secure_erase_trim(card))) { > err = -EOPNOTSUPP; > goto out; > } > > - /* The sanitize operation is supported at v4.5 only */ > - if (mmc_can_sanitize(card)) { > - err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, > - EXT_CSD_SANITIZE_START, 1, 0); > - goto out; > - } > - > from = blk_rq_pos(req); > nr = blk_rq_sectors(req); > > @@ -922,6 +918,44 @@ out: > return err ? 0 : 1; > } > > +int mmc_blk_issue_sanitize_rq(struct mmc_queue *mq, > + struct request *req) > +{ > + struct mmc_blk_data *md = mq->data; > + struct mmc_card *card = md->queue.card; > + int err = 0; > + > + if (!(mmc_can_sanitize(card) && (mq->card->host->caps2 & MMC_CAP2_SANITIZE))) { if (!mmc_can_sanitize(card) && card->host->caps2 & MMC_CAP2_SANITIZE)? > + pr_err("%s: SANITIZE is not supported", __func__); > + err = -EOPNOTSUPP; > + goto out; > + } > + > + pr_info("%s: SANITIZE is supported", __func__); > + > + mmc_sd_card_set_sanitize_in_progress(card); > + > + pr_info("%s: issueing SANITIZE command...", __func__); > + > + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, > + EXT_CSD_SANITIZE_START, 1, 0); > + > + pr_info("%s: SANITIZE command returned...", __func__); Too many pr_info()..i think that need not the message.. > + > + if (err) > + pr_err("%s: mmcblk: mmc_switch() failed. err=%d\n", > + __func__, err); how about using mmcblkX instead of just mmcblk? > + > + mmc_sd_card_set_sanitize_completed(card); > + > +out: > + spin_lock_irq(&md->lock); > + __blk_end_request(req, err, blk_rq_bytes(req)); > + spin_unlock_irq(&md->lock); > + > + return err ? 0 : 1; > +} > + > static int mmc_blk_issue_flush(struct mmc_queue *mq, struct request *req) > { > struct mmc_blk_data *md = mq->data; > @@ -1379,7 +1413,12 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) > goto out; > } > > - if (req && req->cmd_flags & REQ_DISCARD) { > + if (req && req->cmd_flags & REQ_SANITIZE) { > + /* complete ongoing async transfer before issuing discard */ Issuing Sanitize, not discard. typo. > + if (card->host && card->host->areq) > + mmc_blk_issue_rw_rq(mq, NULL); > + ret = mmc_blk_issue_sanitize_rq(mq, req); > + } else if (req && req->cmd_flags & REQ_DISCARD) { > /* complete ongoing async transfer before issuing discard */ > if (card->host->areq) > mmc_blk_issue_rw_rq(mq, NULL); > @@ -1396,6 +1435,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) > ret = mmc_blk_issue_rw_rq(mq, req); > } > > + > out: > if (!req) > /* release host only when there are no more requests */ > diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c > index dcad59c..6946ac1 100644 > --- a/drivers/mmc/card/queue.c > +++ b/drivers/mmc/card/queue.c > @@ -140,10 +140,15 @@ static void mmc_queue_setup_discard(struct request_queue *q, > /* granularity must not be greater than max. discard */ > if (card->pref_erase > max_discard) > q->limits.discard_granularity = 0; > - if (mmc_can_secure_erase_trim(card) || mmc_can_sanitize(card)) > + if (mmc_can_secure_erase_trim(card)) > queue_flag_set_unlocked(QUEUE_FLAG_SECDISCARD, q); > } > > +static void mmc_queue_setup_sanitize(struct request_queue *q) > +{ > + queue_flag_set_unlocked(QUEUE_FLAG_SANITIZE, q); > +} > + > /** > * mmc_init_queue - initialise a queue structure. > * @mq: mmc queue > @@ -181,6 +186,11 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, > if (mmc_can_erase(card)) > mmc_queue_setup_discard(mq->queue, card); > > + if ((mmc_can_sanitize(card) && (host->caps2 & MMC_CAP2_SANITIZE))) > + mmc_queue_setup_sanitize(mq->queue); > + else > + pr_info("%s - card doesn't support sanitize", __func__); > + > #ifdef CONFIG_MMC_BLOCK_BOUNCE > if (host->max_segs == 1) { > unsigned int bouncesz; > diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h > index 9478a6b..0890e9c 100644 > --- a/include/linux/mmc/card.h > +++ b/include/linux/mmc/card.h > @@ -236,6 +236,9 @@ struct mmc_card { > #define MMC_POWEROFF_SHORT 2 > #define MMC_POWEROFF_LONG 3 > > +/* card is in sanitize progress */ > +#define MMC_STATE_SANITIZE_IN_PROGRESS (1<<9) > + > unsigned int erase_size; /* erase size in sectors */ > unsigned int erase_shift; /* if erase unit is power 2 */ > unsigned int pref_erase; /* in sectors */ > @@ -388,6 +391,10 @@ static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data) > #define mmc_card_set_ddr_mode(c) ((c)->state |= MMC_STATE_HIGHSPEED_DDR) > #define mmc_card_set_uhs(c) ((c)->state |= MMC_STATE_ULTRAHIGHSPEED) > #define mmc_sd_card_set_uhs(c) ((c)->state |= MMC_STATE_ULTRAHIGHSPEED) > +#define mmc_sd_card_set_sanitize_in_progress(c) ((c)->state |= \ > + MMC_STATE_SANITIZE_IN_PROGRESS) > +#define mmc_sd_card_set_sanitize_completed(c) ((c)->state &= \ > + ~MMC_STATE_SANITIZE_IN_PROGRESS) > #define mmc_card_set_ext_capacity(c) ((c)->state |= MMC_CARD_SDXC) > #define mmc_card_set_removed(c) ((c)->state |= MMC_CARD_REMOVED) > > diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h > index 9a03d03..93210aa 100644 > --- a/include/linux/mmc/host.h > +++ b/include/linux/mmc/host.h > @@ -242,6 +242,7 @@ struct mmc_host { > #define MMC_CAP2_CACHE_CTRL (1 << 1) /* Allow cache control */ > #define MMC_CAP2_POWEROFF_NOTIFY (1 << 2) /* Notify poweroff supported */ > #define MMC_CAP2_NO_MULTI_READ (1 << 3) /* Multiblock reads don't work */ > +#define MMC_CAP2_SANITIZE (1<<4) /* Support Sanitize */ > > mmc_pm_flag_t pm_caps; /* supported pm features */ > unsigned int power_notify_type; ^ permalink raw reply [flat|nested] 7+ messages in thread
* RE: [PATCH v3 2/2] mmc: card: Adding support for Sanitize in eMMC v4.5 2012-02-22 6:09 ` Jaehoon Chung @ 2012-02-26 9:37 ` Yaniv Gardi 2012-02-27 1:26 ` Jaehoon Chung 0 siblings, 1 reply; 7+ messages in thread From: Yaniv Gardi @ 2012-02-26 9:37 UTC (permalink / raw) To: 'Jaehoon Chung' Cc: linux-mmc, linux-arm-msm, axboe, 'open list' = > -----Original Message----- = > From: Jaehoon Chung [mailto:jh80.chung@samsung.com] = > Sent: Wednesday, February 22, 2012 8:09 AM = > To: Yaniv Gardi = > Cc: linux-mmc@vger.kernel.org; linux-arm-msm@vger.kernel.org; = > axboe@kernel.dk; open list = > Subject: Re: [PATCH v3 2/2] mmc: card: Adding support for Sanitize in = > eMMC v4.5 = > = > On 02/21/2012 11:00 PM, Yaniv Gardi wrote: = > = > > Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> = > > = > > --- = > > drivers/mmc/card/block.c | 58 = > ++++++++++++++++++++++++++++++++++++++------- = > > drivers/mmc/card/queue.c | 12 ++++++++- = > > include/linux/mmc/card.h | 7 +++++ = > > include/linux/mmc/host.h | 1 + = > > 4 files changed, 68 insertions(+), 10 deletions(-) = > > = > > diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c = > > index 0c959c9..5be77e6 100644 = > > --- a/drivers/mmc/card/block.c = > > +++ b/drivers/mmc/card/block.c = > > @@ -830,6 +830,9 @@ static int mmc_blk_issue_discard_rq(struct = > mmc_queue *mq, struct request *req) = > > from = blk_rq_pos(req); = > > nr = blk_rq_sectors(req); = > > = > > + /* 1ST priority is DISCARD. = > > + 2ND is TRIM = > > + 3RD is ERASE */ = > > if (mmc_can_discard(card)) = > > arg = MMC_DISCARD_ARG; = > > else if (mmc_can_trim(card)) = > > @@ -868,18 +871,11 @@ static int mmc_blk_issue_secdiscard_rq(struct = > mmc_queue *mq, = > > unsigned int from, nr, arg; = > > int err = 0, type = MMC_BLK_SECDISCARD; = > > = > > - if (!(mmc_can_secure_erase_trim(card) || = > mmc_can_sanitize(card))) { = > > + if (!(mmc_can_secure_erase_trim(card))) { = > > err = -EOPNOTSUPP; = > > goto out; = > > } = > > = > > - /* The sanitize operation is supported at v4.5 only */ = > > - if (mmc_can_sanitize(card)) { = > > - err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, = > > - EXT_CSD_SANITIZE_START, 1, 0); = > > - goto out; = > > - } = > > - = > > from = blk_rq_pos(req); = > > nr = blk_rq_sectors(req); = > > = > > @@ -922,6 +918,44 @@ out: = > > return err ? 0 : 1; = > > } = > > = > > +int mmc_blk_issue_sanitize_rq(struct mmc_queue *mq, = > > + struct request *req) = > > +{ = > > + struct mmc_blk_data *md = mq->data; = > > + struct mmc_card *card = md->queue.card; = > > + int err = 0; = > > + = > > + if (!(mmc_can_sanitize(card) && (mq->card->host->caps2 & = > MMC_CAP2_SANITIZE))) { = > = > if (!mmc_can_sanitize(card) && card->host->caps2 & = > MMC_CAP2_SANITIZE)? No. it should be (!(A & B)). Since (A & B) means there is a support in sanitize. = > = > > + pr_err("%s: SANITIZE is not supported", __func__); = > > + err = -EOPNOTSUPP; = > > + goto out; = > > + } = > > + = > > + pr_info("%s: SANITIZE is supported", __func__); = > > + = > > + mmc_sd_card_set_sanitize_in_progress(card); = > > + = > > + pr_info("%s: issueing SANITIZE command...", __func__); = > > + = > > + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, = > > + EXT_CSD_SANITIZE_START, 1, 0); = > > + = > > + pr_info("%s: SANITIZE command returned...", __func__); = > = > Too many pr_info()..i think that need not the message.. Printout Removed. = > = > > + = > > + if (err) = > > + pr_err("%s: mmcblk: mmc_switch() failed. err=%d\n", = > > + __func__, err); = > = > how about using mmcblkX instead of just mmcblk? Ok. I changed it to mmc%d = > = > > + = > > + mmc_sd_card_set_sanitize_completed(card); = > > + = > > +out: = > > + spin_lock_irq(&md->lock); = > > + __blk_end_request(req, err, blk_rq_bytes(req)); = > > + spin_unlock_irq(&md->lock); = > > + = > > + return err ? 0 : 1; = > > +} = > > + = > > static int mmc_blk_issue_flush(struct mmc_queue *mq, struct = > request *req) = > > { = > > struct mmc_blk_data *md = mq->data; = > > @@ -1379,7 +1413,12 @@ static int mmc_blk_issue_rq(struct mmc_queue = > *mq, struct request *req) = > > goto out; = > > } = > > = > > - if (req && req->cmd_flags & REQ_DISCARD) { = > > + if (req && req->cmd_flags & REQ_SANITIZE) { = > > + /* complete ongoing async transfer before issuing discard = > */ = > = > Issuing Sanitize, not discard. typo. Typo fixed. = > = > > + if (card->host && card->host->areq) = > > + mmc_blk_issue_rw_rq(mq, NULL); = > > + ret = mmc_blk_issue_sanitize_rq(mq, req); = > > + } else if (req && req->cmd_flags & REQ_DISCARD) { = > > /* complete ongoing async transfer before issuing discard = > */ = > > if (card->host->areq) = > > mmc_blk_issue_rw_rq(mq, NULL); = > > @@ -1396,6 +1435,7 @@ static int mmc_blk_issue_rq(struct mmc_queue = > *mq, struct request *req) = > > ret = mmc_blk_issue_rw_rq(mq, req); = > > } = > > = > > + = > > out: = > > if (!req) = > > /* release host only when there are no more requests */ = > > diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c = > > index dcad59c..6946ac1 100644 = > > --- a/drivers/mmc/card/queue.c = > > +++ b/drivers/mmc/card/queue.c = > > @@ -140,10 +140,15 @@ static void mmc_queue_setup_discard(struct = > request_queue *q, = > > /* granularity must not be greater than max. discard */ = > > if (card->pref_erase > max_discard) = > > q->limits.discard_granularity = 0; = > > - if (mmc_can_secure_erase_trim(card) || mmc_can_sanitize(card)) = > > + if (mmc_can_secure_erase_trim(card)) = > > queue_flag_set_unlocked(QUEUE_FLAG_SECDISCARD, q); = > > } = > > = > > +static void mmc_queue_setup_sanitize(struct request_queue *q) = > > +{ = > > + queue_flag_set_unlocked(QUEUE_FLAG_SANITIZE, q); = > > +} = > > + = > > /** = > > * mmc_init_queue - initialise a queue structure. = > > * @mq: mmc queue = > > @@ -181,6 +186,11 @@ int mmc_init_queue(struct mmc_queue *mq, = > struct mmc_card *card, = > > if (mmc_can_erase(card)) = > > mmc_queue_setup_discard(mq->queue, card); = > > = > > + if ((mmc_can_sanitize(card) && (host->caps2 & = > MMC_CAP2_SANITIZE))) = > > + mmc_queue_setup_sanitize(mq->queue); = > > + else = > > + pr_info("%s - card doesn't support sanitize", __func__); = > > + = > > #ifdef CONFIG_MMC_BLOCK_BOUNCE = > > if (host->max_segs == 1) { = > > unsigned int bouncesz; = > > diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h = > > index 9478a6b..0890e9c 100644 = > > --- a/include/linux/mmc/card.h = > > +++ b/include/linux/mmc/card.h = > > @@ -236,6 +236,9 @@ struct mmc_card { = > > #define MMC_POWEROFF_SHORT 2 = > > #define MMC_POWEROFF_LONG 3 = > > = > > +/* card is in sanitize progress */ = > > +#define MMC_STATE_SANITIZE_IN_PROGRESS (1<<9) = > > + = > > unsigned int erase_size; /* erase size in sectors */ = > > unsigned int erase_shift; /* if erase unit is = > power 2 */ = > > unsigned int pref_erase; /* in sectors */ = > > @@ -388,6 +391,10 @@ static inline void __maybe_unused = > remove_quirk(struct mmc_card *card, int data) = > > #define mmc_card_set_ddr_mode(c) ((c)->state |= = > MMC_STATE_HIGHSPEED_DDR) = > > #define mmc_card_set_uhs(c) ((c)->state |= = > MMC_STATE_ULTRAHIGHSPEED) = > > #define mmc_sd_card_set_uhs(c) ((c)->state |= = > MMC_STATE_ULTRAHIGHSPEED) = > > +#define mmc_sd_card_set_sanitize_in_progress(c) ((c)->state |= \ = > > + MMC_STATE_SANITIZE_IN_PROGRESS) = > > +#define mmc_sd_card_set_sanitize_completed(c) ((c)->state &= \ = > > + ~MMC_STATE_SANITIZE_IN_PROGRESS) = > > #define mmc_card_set_ext_capacity(c) ((c)->state |= MMC_CARD_SDXC) = > > #define mmc_card_set_removed(c) ((c)->state |= MMC_CARD_REMOVED) = > > = > > diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h = > > index 9a03d03..93210aa 100644 = > > --- a/include/linux/mmc/host.h = > > +++ b/include/linux/mmc/host.h = > > @@ -242,6 +242,7 @@ struct mmc_host { = > > #define MMC_CAP2_CACHE_CTRL (1 << 1) /* Allow cache = > control */ = > > #define MMC_CAP2_POWEROFF_NOTIFY (1 << 2) /* Notify poweroff = > supported */ = > > #define MMC_CAP2_NO_MULTI_READ (1 << 3) /* Multiblock reads = > don't work */ = > > +#define MMC_CAP2_SANITIZE (1<<4) /* Support Sanitize = > */ = > > = > > mmc_pm_flag_t pm_caps; /* supported pm features */ = > > unsigned int power_notify_type; = > ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v3 2/2] mmc: card: Adding support for Sanitize in eMMC v4.5 2012-02-26 9:37 ` Yaniv Gardi @ 2012-02-27 1:26 ` Jaehoon Chung 0 siblings, 0 replies; 7+ messages in thread From: Jaehoon Chung @ 2012-02-27 1:26 UTC (permalink / raw) To: Yaniv Gardi; +Cc: linux-mmc, linux-arm-msm, axboe, 'open list' On 02/26/2012 06:37 PM, Yaniv Gardi wrote: > > > = > -----Original Message----- > = > From: Jaehoon Chung [mailto:jh80.chung@samsung.com] > = > Sent: Wednesday, February 22, 2012 8:09 AM > = > To: Yaniv Gardi > = > Cc: linux-mmc@vger.kernel.org; linux-arm-msm@vger.kernel.org; > = > axboe@kernel.dk; open list > = > Subject: Re: [PATCH v3 2/2] mmc: card: Adding support for Sanitize in > = > eMMC v4.5 > = > > = > On 02/21/2012 11:00 PM, Yaniv Gardi wrote: > = > > = > > Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> > = > > > = > > --- > = > > drivers/mmc/card/block.c | 58 > = > ++++++++++++++++++++++++++++++++++++++------- > = > > drivers/mmc/card/queue.c | 12 ++++++++- > = > > include/linux/mmc/card.h | 7 +++++ > = > > include/linux/mmc/host.h | 1 + > = > > 4 files changed, 68 insertions(+), 10 deletions(-) > = > > > = > > diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c > = > > index 0c959c9..5be77e6 100644 > = > > --- a/drivers/mmc/card/block.c > = > > +++ b/drivers/mmc/card/block.c > = > > @@ -830,6 +830,9 @@ static int mmc_blk_issue_discard_rq(struct > = > mmc_queue *mq, struct request *req) > = > > from = blk_rq_pos(req); > = > > nr = blk_rq_sectors(req); > = > > > = > > + /* 1ST priority is DISCARD. > = > > + 2ND is TRIM > = > > + 3RD is ERASE */ > = > > if (mmc_can_discard(card)) > = > > arg = MMC_DISCARD_ARG; > = > > else if (mmc_can_trim(card)) > = > > @@ -868,18 +871,11 @@ static int mmc_blk_issue_secdiscard_rq(struct > = > mmc_queue *mq, > = > > unsigned int from, nr, arg; > = > > int err = 0, type = MMC_BLK_SECDISCARD; > = > > > = > > - if (!(mmc_can_secure_erase_trim(card) || > = > mmc_can_sanitize(card))) { > = > > + if (!(mmc_can_secure_erase_trim(card))) { > = > > err = -EOPNOTSUPP; > = > > goto out; > = > > } > = > > > = > > - /* The sanitize operation is supported at v4.5 only */ > = > > - if (mmc_can_sanitize(card)) { > = > > - err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, > = > > - EXT_CSD_SANITIZE_START, 1, 0); > = > > - goto out; > = > > - } > = > > - > = > > from = blk_rq_pos(req); > = > > nr = blk_rq_sectors(req); > = > > > = > > @@ -922,6 +918,44 @@ out: > = > > return err ? 0 : 1; > = > > } > = > > > = > > +int mmc_blk_issue_sanitize_rq(struct mmc_queue *mq, > = > > + struct request *req) > = > > +{ > = > > + struct mmc_blk_data *md = mq->data; > = > > + struct mmc_card *card = md->queue.card; > = > > + int err = 0; > = > > + > = > > + if (!(mmc_can_sanitize(card) && (mq->card->host->caps2 & > = > MMC_CAP2_SANITIZE))) { > = > > = > if (!mmc_can_sanitize(card) && card->host->caps2 & > = > MMC_CAP2_SANITIZE)? > > No. it should be (!(A & B)). Since (A & B) means there is a support in > sanitize. You're right. it's typo. my means that use "card->host->caps2" instead of "mq->card->host->caps2". Best Regards, Jaehoon Chung > > > = > > = > > + pr_err("%s: SANITIZE is not supported", __func__); > = > > + err = -EOPNOTSUPP; > = > > + goto out; > = > > + } > = > > + > = > > + pr_info("%s: SANITIZE is supported", __func__); > = > > + > = > > + mmc_sd_card_set_sanitize_in_progress(card); > = > > + > = > > + pr_info("%s: issueing SANITIZE command...", __func__); > = > > + > = > > + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, > = > > + EXT_CSD_SANITIZE_START, 1, 0); > = > > + > = > > + pr_info("%s: SANITIZE command returned...", __func__); > = > > = > Too many pr_info()..i think that need not the message.. > > Printout Removed. > > > = > > = > > + > = > > + if (err) > = > > + pr_err("%s: mmcblk: mmc_switch() failed. err=%d\n", > = > > + __func__, err); > = > > = > how about using mmcblkX instead of just mmcblk? > > Ok. I changed it to mmc%d > > = > > = > > + > = > > + mmc_sd_card_set_sanitize_completed(card); > = > > + > = > > +out: > = > > + spin_lock_irq(&md->lock); > = > > + __blk_end_request(req, err, blk_rq_bytes(req)); > = > > + spin_unlock_irq(&md->lock); > = > > + > = > > + return err ? 0 : 1; > = > > +} > = > > + > = > > static int mmc_blk_issue_flush(struct mmc_queue *mq, struct > = > request *req) > = > > { > = > > struct mmc_blk_data *md = mq->data; > = > > @@ -1379,7 +1413,12 @@ static int mmc_blk_issue_rq(struct mmc_queue > = > *mq, struct request *req) > = > > goto out; > = > > } > = > > > = > > - if (req && req->cmd_flags & REQ_DISCARD) { > = > > + if (req && req->cmd_flags & REQ_SANITIZE) { > = > > + /* complete ongoing async transfer before issuing discard > = > */ > = > > = > Issuing Sanitize, not discard. typo. > > Typo fixed. > > = > > = > > + if (card->host && card->host->areq) > = > > + mmc_blk_issue_rw_rq(mq, NULL); > = > > + ret = mmc_blk_issue_sanitize_rq(mq, req); > = > > + } else if (req && req->cmd_flags & REQ_DISCARD) { > = > > /* complete ongoing async transfer before issuing discard > = > */ > = > > if (card->host->areq) > = > > mmc_blk_issue_rw_rq(mq, NULL); > = > > @@ -1396,6 +1435,7 @@ static int mmc_blk_issue_rq(struct mmc_queue > = > *mq, struct request *req) > = > > ret = mmc_blk_issue_rw_rq(mq, req); > = > > } > = > > > = > > + > = > > out: > = > > if (!req) > = > > /* release host only when there are no more requests */ > = > > diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c > = > > index dcad59c..6946ac1 100644 > = > > --- a/drivers/mmc/card/queue.c > = > > +++ b/drivers/mmc/card/queue.c > = > > @@ -140,10 +140,15 @@ static void mmc_queue_setup_discard(struct > = > request_queue *q, > = > > /* granularity must not be greater than max. discard */ > = > > if (card->pref_erase > max_discard) > = > > q->limits.discard_granularity = 0; > = > > - if (mmc_can_secure_erase_trim(card) || mmc_can_sanitize(card)) > = > > + if (mmc_can_secure_erase_trim(card)) > = > > queue_flag_set_unlocked(QUEUE_FLAG_SECDISCARD, q); > = > > } > = > > > = > > +static void mmc_queue_setup_sanitize(struct request_queue *q) > = > > +{ > = > > + queue_flag_set_unlocked(QUEUE_FLAG_SANITIZE, q); > = > > +} > = > > + > = > > /** > = > > * mmc_init_queue - initialise a queue structure. > = > > * @mq: mmc queue > = > > @@ -181,6 +186,11 @@ int mmc_init_queue(struct mmc_queue *mq, > = > struct mmc_card *card, > = > > if (mmc_can_erase(card)) > = > > mmc_queue_setup_discard(mq->queue, card); > = > > > = > > + if ((mmc_can_sanitize(card) && (host->caps2 & > = > MMC_CAP2_SANITIZE))) > = > > + mmc_queue_setup_sanitize(mq->queue); > = > > + else > = > > + pr_info("%s - card doesn't support sanitize", __func__); > = > > + > = > > #ifdef CONFIG_MMC_BLOCK_BOUNCE > = > > if (host->max_segs == 1) { > = > > unsigned int bouncesz; > = > > diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h > = > > index 9478a6b..0890e9c 100644 > = > > --- a/include/linux/mmc/card.h > = > > +++ b/include/linux/mmc/card.h > = > > @@ -236,6 +236,9 @@ struct mmc_card { > = > > #define MMC_POWEROFF_SHORT 2 > = > > #define MMC_POWEROFF_LONG 3 > = > > > = > > +/* card is in sanitize progress */ > = > > +#define MMC_STATE_SANITIZE_IN_PROGRESS (1<<9) > = > > + > = > > unsigned int erase_size; /* erase size in sectors */ > = > > unsigned int erase_shift; /* if erase unit is > = > power 2 */ > = > > unsigned int pref_erase; /* in sectors */ > = > > @@ -388,6 +391,10 @@ static inline void __maybe_unused > = > remove_quirk(struct mmc_card *card, int data) > = > > #define mmc_card_set_ddr_mode(c) ((c)->state |= > = > MMC_STATE_HIGHSPEED_DDR) > = > > #define mmc_card_set_uhs(c) ((c)->state |= > = > MMC_STATE_ULTRAHIGHSPEED) > = > > #define mmc_sd_card_set_uhs(c) ((c)->state |= > = > MMC_STATE_ULTRAHIGHSPEED) > = > > +#define mmc_sd_card_set_sanitize_in_progress(c) ((c)->state |= \ > = > > + MMC_STATE_SANITIZE_IN_PROGRESS) > = > > +#define mmc_sd_card_set_sanitize_completed(c) ((c)->state &= \ > = > > + ~MMC_STATE_SANITIZE_IN_PROGRESS) > = > > #define mmc_card_set_ext_capacity(c) ((c)->state |= MMC_CARD_SDXC) > = > > #define mmc_card_set_removed(c) ((c)->state |= MMC_CARD_REMOVED) > = > > > = > > diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h > = > > index 9a03d03..93210aa 100644 > = > > --- a/include/linux/mmc/host.h > = > > +++ b/include/linux/mmc/host.h > = > > @@ -242,6 +242,7 @@ struct mmc_host { > = > > #define MMC_CAP2_CACHE_CTRL (1 << 1) /* Allow cache > = > control */ > = > > #define MMC_CAP2_POWEROFF_NOTIFY (1 << 2) /* Notify poweroff > = > supported */ > = > > #define MMC_CAP2_NO_MULTI_READ (1 << 3) /* Multiblock reads > = > don't work */ > = > > +#define MMC_CAP2_SANITIZE (1<<4) /* Support Sanitize > = > */ > = > > > = > > mmc_pm_flag_t pm_caps; /* supported pm features */ > = > > unsigned int power_notify_type; > = > > > > ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2012-02-27 1:26 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <1329832825-8844-1-git-send-email-ygardi@codeaurora.org>
2012-02-21 14:00 ` [PATCH v3 1/2] block: IOCTL support for Sanitize in eMMC v4.5 Yaniv Gardi
2012-02-21 14:00 ` [PATCH v3 2/2] mmc: card: Adding " Yaniv Gardi
2012-02-21 18:04 ` Stephen Boyd
2012-02-26 9:35 ` Yaniv Gardi
2012-02-22 6:09 ` Jaehoon Chung
2012-02-26 9:37 ` Yaniv Gardi
2012-02-27 1:26 ` Jaehoon Chung
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox