* [PATCH] mtip32xx: fix incorrect value set for drv_cleanup_done, and re-initialize and start port in mtip_restart_port()
@ 2012-03-07 2:37 Asai Thambi Samymuthu Pattrayasamy (asamymuthupa) [CONT - Type 2]
0 siblings, 0 replies; only message in thread
From: Asai Thambi Samymuthu Pattrayasamy (asamymuthupa) [CONT - Type 2] @ 2012-03-07 2:37 UTC (permalink / raw)
To: Jens Axboe; +Cc: linux-kernel@vger.kernel.org, Sam Bradshaw (sbradshaw)
From: Asai Thambi S P <asamymuthupa@micron.com>
This patch includes two changes:
* fix incorrect value set for drv_cleanup_done
* re-initialize and start port in mtip_restart_port()
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Sam Bradshaw <sbradshaw@micron.com>
---
drivers/block/mtip32xx/mtip32xx.c | 19 ++++++++-----------
1 files changed, 8 insertions(+), 11 deletions(-)
diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c
index 8eb81c9..04f69e6 100644
--- a/drivers/block/mtip32xx/mtip32xx.c
+++ b/drivers/block/mtip32xx/mtip32xx.c
@@ -422,6 +422,10 @@ static void mtip_init_port(struct mtip_port *port)
/* Clear any pending interrupts for this port */
writel(readl(port->mmio + PORT_IRQ_STAT), port->mmio + PORT_IRQ_STAT);
+ /* Clear any pending interrupts on the HBA. */
+ writel(readl(port->dd->mmio + HOST_IRQ_STAT),
+ port->dd->mmio + HOST_IRQ_STAT);
+
/* Enable port interrupts */
writel(DEF_PORT_IRQ, port->mmio + PORT_IRQ_MASK);
}
@@ -490,11 +494,9 @@ static void mtip_restart_port(struct mtip_port *port)
dev_warn(&port->dd->pdev->dev,
"COM reset failed\n");
- /* Clear SError, the PxSERR.DIAG.x should be set so clear it */
- writel(readl(port->mmio + PORT_SCR_ERR), port->mmio + PORT_SCR_ERR);
+ mtip_init_port(port);
+ mtip_start_port(port);
- /* Enable the DMA engine */
- mtip_enable_engine(port, 1);
}
/*
@@ -3359,9 +3361,6 @@ static int mtip_pci_probe(struct pci_dev *pdev,
return -ENOMEM;
}
- /* Set the atomic variable as 1 in case of SRSI */
- atomic_set(&dd->drv_cleanup_done, true);
-
atomic_set(&dd->resumeflag, false);
/* Attach the private data to this PCI device. */
@@ -3434,8 +3433,8 @@ iomap_err:
pci_set_drvdata(pdev, NULL);
return rv;
done:
- /* Set the atomic variable as 0 in case of SRSI */
- atomic_set(&dd->drv_cleanup_done, true);
+ /* Set the atomic variable as 0 */
+ atomic_set(&dd->drv_cleanup_done, false);
return rv;
}
@@ -3463,8 +3462,6 @@ static void mtip_pci_remove(struct pci_dev *pdev)
}
}
}
- /* Set the atomic variable as 1 in case of SRSI */
- atomic_set(&dd->drv_cleanup_done, true);
/* Clean up the block layer. */
mtip_block_remove(dd);
--
1.7.1
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2012-03-07 2:37 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-03-07 2:37 [PATCH] mtip32xx: fix incorrect value set for drv_cleanup_done, and re-initialize and start port in mtip_restart_port() Asai Thambi Samymuthu Pattrayasamy (asamymuthupa) [CONT - Type 2]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox