From: Nicolas Ferre <nicolas.ferre@atmel.com>
To: Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>,
linux-arm-kernel <linux-arm-kernel@lists.infradead.org>
Cc: Linux Kernel list <linux-kernel@vger.kernel.org>,
Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Subject: [GIT PULL] at91: fist cleanup branch for 3.5
Date: Tue, 17 Apr 2012 17:45:59 +0200 [thread overview]
Message-ID: <4F8D9037.9010401@atmel.com> (raw)
Arnd, Olof,
The following changes since commit e816b57a337ea3b755de72bec38c10c864f23015:
Linux 3.4-rc3 (2012-04-15 18:28:29 -0700)
are available in the git repository at:
git://github.com/at91linux/linux-at91.git tags/at91-3.5-cleanup
for you to fetch changes up to 39ecc143b4c1f3d42e8300e7f5274681b99f95c2:
ARM: at91: add defconfig for device tree (2012-04-17 14:47:22 +0200)
----------------------------------------------------------------
First batch of AT91 cleanup for 3.5 kernel.
- The biggest improvement of this series is the ability to compile several
AT91 SoCs in one kernel image.
For now on it's limited to the DT-enabled boards but we can compile all
the core together.
- The Kconfig series is stacked before other patches as it is simple and
non-intrusive. Its goal is to remove too restrictive dependencies on
SoC names. This will allow to add support for newer SoC seamlessly.
- Some very "cosmetic" Kconfig changes are also added (entry names,
comments, etc.).
----------------------------------------------------------------
Jean-Christophe PLAGNIOL-VILLARD (10):
ARM: at91: uncompress Store UART address in a variable
ARM: at91: uncompress: autodetect the uart to use
ARM: at91: drop at91_set_serial_console
ARM: at91: do not pin mux the UARTs in init_early
ARM: at91: move at91_init_leds to board init
ARM: at91: pm select memory controler at runtime
ARM: at91: add SOC_AT91SAM9 kconfig option to factorise select
ARN: at91: introduce SOC_AT91xxx define to allow to compile SoC core support
ARM: at91/dt: do not specify the board any more
ARM: at91: add defconfig for device tree
Nicolas Ferre (9):
ARM: at91: change AT91 Kconfig entry comment
ARM: at91/Kconfig: change at91sam9g45 entry
ARM: at91/Kconfig: add comment to at91sam9x5 family entry
ARM: at91/Kconfig: add clarifications to AT91SAM9M10G45-EK entry
ARM: at91/Kconfig: add AT91SAM9x5 family to AT91_EARLY_DBGU0 entry
ARM: at91/Kconfig: website link for AT91SAM9G20-EK
rtc: Kconfig: remove dependency for AT91 rtc driver
Input: Kconfig: remove dependency for atmel_tsadcc driver
hwrng: Kconfig: remove dependency for atmel-rng driver
arch/arm/Kconfig | 4 +--
arch/arm/configs/at91_dt_defconfig | 196 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
arch/arm/configs/at91rm9200_defconfig | 1 +
arch/arm/mach-at91/Kconfig | 186 +++++++++++++++++++++++++++++++++++++++++++++-------------------------------------------------
arch/arm/mach-at91/Makefile | 26 +++++++++-----
arch/arm/mach-at91/at91rm9200.c | 12 -------
arch/arm/mach-at91/at91rm9200_devices.c | 12 -------
arch/arm/mach-at91/at91sam9260.c | 12 -------
arch/arm/mach-at91/at91sam9260_devices.c | 12 -------
arch/arm/mach-at91/at91sam9261.c | 12 -------
arch/arm/mach-at91/at91sam9261_devices.c | 12 -------
arch/arm/mach-at91/at91sam9263.c | 12 -------
arch/arm/mach-at91/at91sam9263_devices.c | 12 -------
arch/arm/mach-at91/at91sam9g45.c | 12 -------
arch/arm/mach-at91/at91sam9g45_devices.c | 12 -------
arch/arm/mach-at91/at91sam9rl.c | 12 -------
arch/arm/mach-at91/at91sam9rl_devices.c | 12 -------
arch/arm/mach-at91/board-1arm.c | 24 ++++++-------
arch/arm/mach-at91/board-afeb-9260v1.c | 28 +++++++--------
arch/arm/mach-at91/board-cam60.c | 8 ++---
arch/arm/mach-at91/board-carmeva.c | 18 ++++------
arch/arm/mach-at91/board-cpu9krea.c | 52 +++++++++++++--------------
arch/arm/mach-at91/board-cpuat91.c | 40 ++++++++++-----------
arch/arm/mach-at91/board-csb337.c | 13 +++----
arch/arm/mach-at91/board-csb637.c | 8 ++---
arch/arm/mach-at91/board-dt.c | 8 +----
arch/arm/mach-at91/board-eb9200.c | 24 ++++++-------
arch/arm/mach-at91/board-ecbat91.c | 20 +++++------
arch/arm/mach-at91/board-eco920.c | 13 +++----
arch/arm/mach-at91/board-flexibity.c | 8 ++---
arch/arm/mach-at91/board-foxg20.c | 71 +++++++++++++++++-------------------
arch/arm/mach-at91/board-gsia18s.c | 63 ++++++++++++++++----------------
arch/arm/mach-at91/board-kafa.c | 20 +++++------
arch/arm/mach-at91/board-kb9202.c | 32 ++++++++---------
arch/arm/mach-at91/board-neocore926.c | 14 +++-----
arch/arm/mach-at91/board-pcontrol-g20.c | 21 ++++++-----
arch/arm/mach-at91/board-picotux200.c | 18 ++++------
arch/arm/mach-at91/board-qil-a9260.c | 31 +++++++---------
arch/arm/mach-at91/board-rm9200dk.c | 24 ++++++-------
arch/arm/mach-at91/board-rm9200ek.c | 24 ++++++-------
arch/arm/mach-at91/board-rsi-ews.c | 36 +++++++++----------
arch/arm/mach-at91/board-sam9-l9260.c | 30 +++++++---------
arch/arm/mach-at91/board-sam9260ek.c | 24 ++++++-------
arch/arm/mach-at91/board-sam9261ek.c | 14 +++-----
arch/arm/mach-at91/board-sam9263ek.c | 14 +++-----
arch/arm/mach-at91/board-sam9g20ek.c | 24 ++++++-------
arch/arm/mach-at91/board-sam9m10g45ek.c | 16 ++++-----
arch/arm/mach-at91/board-sam9rlek.c | 14 +++-----
arch/arm/mach-at91/board-snapper9260.c | 18 +++++-----
arch/arm/mach-at91/board-stamp9g20.c | 64 +++++++++++++--------------------
arch/arm/mach-at91/board-usb-a926x.c | 8 ++---
arch/arm/mach-at91/board-yl-9200.c | 36 +++++++++----------
arch/arm/mach-at91/cpuidle.c | 8 ++++-
arch/arm/mach-at91/generic.h | 11 ------
arch/arm/mach-at91/include/mach/at91rm9200.h | 5 ---
arch/arm/mach-at91/include/mach/at91sam9260.h | 7 ----
arch/arm/mach-at91/include/mach/at91sam9261.h | 4 ---
arch/arm/mach-at91/include/mach/at91sam9263.h | 4 ---
arch/arm/mach-at91/include/mach/at91sam9g45.h | 5 ---
arch/arm/mach-at91/include/mach/at91sam9rl.h | 5 ---
arch/arm/mach-at91/include/mach/at91sam9x5.h | 8 -----
arch/arm/mach-at91/include/mach/board.h | 1 -
arch/arm/mach-at91/include/mach/cpu.h | 28 ++++++---------
arch/arm/mach-at91/include/mach/hardware.h | 16 ++-------
arch/arm/mach-at91/include/mach/uncompress.h | 178 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++---------------
arch/arm/mach-at91/pm.c | 12 ++++---
arch/arm/mach-at91/pm.h | 15 +-------
arch/arm/mach-at91/pm_slowclock.S | 2 +-
arch/arm/mach-at91/soc.h | 14 ++++----
drivers/char/hw_random/Kconfig | 2 +-
drivers/input/touchscreen/Kconfig | 4 +--
drivers/rtc/Kconfig | 2 +-
72 files changed, 862 insertions(+), 906 deletions(-)
create mode 100644 arch/arm/configs/at91_dt_defconfig
Thanks, best regards,
--
Nicolas Ferre
next reply other threads:[~2012-04-17 15:46 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-17 15:45 Nicolas Ferre [this message]
2012-04-17 16:02 ` [GIT PULL] at91: fist cleanup branch for 3.5 Nicolas Ferre
2012-04-22 20:32 ` Arnd Bergmann
2012-04-22 22:03 ` Olof Johansson
2012-04-23 11:11 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F8D9037.9010401@atmel.com \
--to=nicolas.ferre@atmel.com \
--cc=arnd@arndb.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=olof@lixom.net \
--cc=plagnioj@jcrosoft.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox