From: Lee Jones <lee.jones@linaro.org>
To: Linus Walleij <linus.walleij@linaro.org>
Cc: Anton Vorontsov <anton.vorontsov@linaro.org>,
linux-kernel@vger.kernel.org,
Karl Komierowski <karl.komierowski@stericsson.com>,
Arun Murthy <arun.murthy@stericsson.com>
Subject: Re: [PATCH 1/3] power/ab8500_charger: harden platform data check
Date: Sat, 28 Apr 2012 17:38:13 +0100 [thread overview]
Message-ID: <4F9C1CF5.3050706@linaro.org> (raw)
In-Reply-To: <CACRpkdaM=OecD=M_J9X9shYKQkWO03mhb2BFxCWOeocr8_m=DQ@mail.gmail.com>
Find my version of the 3 patches below.
These also clean up some ugliness and brings the variable initialisation
formatting more into line with other drivers. If you like them I can
officially send them to the MLs as patches.
Your call of course.
On 28/04/12 13:59, Linus Walleij wrote:
> On Fri, Apr 13, 2012 at 10:15 AM, Linus Walleij
> <linus.walleij@stericsson.com> wrote:
>
>> From: Linus Walleij<linus.walleij@linaro.org>
>>
>> If no platform data at all is supplied the driver crashes,
>> extend the checks to be more careful so we can compile in the
>> driver and boot also without platform data present.
>>
>> Cc: Arun Murthy<arun.murthy@stericsson.com>
>> Signed-off-by: Linus Walleij<linus.walleij@linaro.org>
>
> Anton have you picked these three patches for the -rc:s?
>
> It seems Lee Jones is facing the problems so would be nice to
> have this upstream.
>
> Yours,
> Linus Walleij
diff --git a/drivers/power/ab8500_btemp.c b/drivers/power/ab8500_btemp.c
index d8bb993..a2ebcb4 100644
--- a/drivers/power/ab8500_btemp.c
+++ b/drivers/power/ab8500_btemp.c
@@ -964,10 +964,15 @@ static int __devinit ab8500_btemp_probe(struct platform_device *pdev)
{
int irq, i, ret = 0;
u8 val;
- struct abx500_bm_plat_data *plat_data;
+ struct abx500_bm_plat_data *plat_data = pdev->dev.platform_data;
+ struct ab8500_btemp *di;
+
+ if (!plat_data) {
+ dev_err(&pdev->dev, "No platform data\n");
+ return -EINVAL;
+ }
- struct ab8500_btemp *di =
- kzalloc(sizeof(struct ab8500_btemp), GFP_KERNEL);
+ di = kzalloc(sizeof(struct ab8500_btemp), GFP_KERNEL);
if (!di)
return -ENOMEM;
@@ -977,7 +982,6 @@ static int __devinit ab8500_btemp_probe(struct platform_device *pdev)
di->gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
/* get btemp specific platform data */
- plat_data = pdev->dev.platform_data;
di->pdata = plat_data->btemp;
if (!di->pdata) {
dev_err(di->dev, "no btemp platform data supplied\n");
##############################################################################
diff --git a/drivers/power/ab8500_charger.c b/drivers/power/ab8500_charger.c
index e2b4acc..a4e37a8 100644
--- a/drivers/power/ab8500_charger.c
+++ b/drivers/power/ab8500_charger.c
@@ -2534,10 +2534,15 @@ static int __devexit ab8500_charger_remove(struct platform_device *pdev)
static int __devinit ab8500_charger_probe(struct platform_device *pdev)
{
int irq, i, charger_status, ret = 0;
- struct abx500_bm_plat_data *plat_data;
+ struct abx500_bm_plat_data *plat_data = pdev->dev.platform_data;
+ struct ab8500_charger *di;
- struct ab8500_charger *di =
- kzalloc(sizeof(struct ab8500_charger), GFP_KERNEL);
+ if (!plat_data) {
+ dev_err(&pdev->dev, "No platform data\n");
+ return -EINVAL;
+ }
+
+ di = kzalloc(sizeof(struct ab8500_charger), GFP_KERNEL);
if (!di)
return -ENOMEM;
@@ -2550,7 +2555,6 @@ static int __devinit ab8500_charger_probe(struct platform_device *pdev)
spin_lock_init(&di->usb_state.usb_lock);
/* get charger specific platform data */
- plat_data = pdev->dev.platform_data;
di->pdata = plat_data->charger;
if (!di->pdata) {
##############################################################################
diff --git a/drivers/power/ab8500_fg.c b/drivers/power/ab8500_fg.c
index c22f2f0..d88bc47 100644
--- a/drivers/power/ab8500_fg.c
+++ b/drivers/power/ab8500_fg.c
@@ -2446,10 +2446,15 @@ static int __devinit ab8500_fg_probe(struct platform_device *pdev)
{
int i, irq;
int ret = 0;
- struct abx500_bm_plat_data *plat_data;
+ struct abx500_bm_plat_data *plat_data = pdev->dev.platform_data;
+ struct ab8500_fg *di;
+
+ if (!plat_data) {
+ dev_err(&pdev->dev, "No platform data\n");
+ return -EINVAL;
+ }
- struct ab8500_fg *di =
- kzalloc(sizeof(struct ab8500_fg), GFP_KERNEL);
+ di = kzalloc(sizeof(struct ab8500_fg), GFP_KERNEL);
if (!di)
return -ENOMEM;
@@ -2461,7 +2466,6 @@ static int __devinit ab8500_fg_probe(struct platform_device *pdev)
di->gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
/* get fg specific platform data */
- plat_data = pdev->dev.platform_data;
di->pdata = plat_data->fg;
if (!di->pdata) {
dev_err(di->dev, "no fg platform data supplied\n");
--
1.7.9.1
next prev parent reply other threads:[~2012-04-28 16:38 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-13 8:15 [PATCH 1/3] power/ab8500_charger: harden platform data check Linus Walleij
2012-04-13 8:42 ` Arun MURTHY
2012-05-05 12:06 ` Anton Vorontsov
2012-04-28 12:59 ` Linus Walleij
2012-04-28 16:38 ` Lee Jones [this message]
2012-05-05 12:08 ` Anton Vorontsov
[not found] ` <CAF2Aj3hy3KOsH3aiZ0UpuERSwOoqFdYQ4su-hEVcU-qp8r5d9A@mail.gmail.com>
2012-05-05 21:55 ` Anton Vorontsov
2012-05-06 7:25 ` Lee Jones
2012-05-22 11:34 ` Lee Jones
2012-05-22 11:56 ` Anton Vorontsov
2012-05-22 12:03 ` Lee Jones
2012-05-22 13:22 ` Anton Vorontsov
2012-05-23 19:00 ` Linus Walleij
2012-05-02 11:31 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F9C1CF5.3050706@linaro.org \
--to=lee.jones@linaro.org \
--cc=anton.vorontsov@linaro.org \
--cc=arun.murthy@stericsson.com \
--cc=karl.komierowski@stericsson.com \
--cc=linus.walleij@linaro.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).