From: Hannes Reinecke <hare@suse.de>
To: Gleb Natapov <gleb@redhat.com>
Cc: LKML <linux-kernel@vger.kernel.org>,
"H. Peter Anvin" <hpa@linux.intel.com>
Subject: Re: [PATCH] EDD: Check for correct EDD 3.0 length
Date: Tue, 15 May 2012 13:20:41 +0200 [thread overview]
Message-ID: <4FB23C09.7060300@suse.de> (raw)
In-Reply-To: <20120515111255.GJ32036@redhat.com>
On 05/15/2012 01:12 PM, Gleb Natapov wrote:
> Next time you resent an email say why you are doing it (wrong lkml
> address in this case).
>
> On Tue, May 15, 2012 at 01:04:49PM +0200, Hannes Reinecke wrote:
>> The device_path_info_length for EDD 3.0 is 36, not 44.
>> Cf http://mbldr.sourceforge.net/specsedd30.pdf.
>>
> That's the wrong spec.
>
Ah-ha.
Why?
>> This is a regression introduced by commit
>> 0c61227094b3ddaca2f847ee287c4a2e3762b5a2
>>
>> Signed-off-by: Hannes Reinecke <hare@suse.de>
>> Cc: Gleb Natapov <gleb@redhat.com>
>> Cc: H. Peter Anvin <hpa@linux.intel.com>
>>
>> diff --git a/drivers/firmware/edd.c b/drivers/firmware/edd.c
>> index e229576..09a77d5 100644
>> --- a/drivers/firmware/edd.c
>> +++ b/drivers/firmware/edd.c
>> @@ -545,8 +545,8 @@ edd_has_edd30(struct edd_device *edev)
>> }
>>
>>
>> - /* We support only T13 spec */
>> - if (info->params.device_path_info_length != 44)
> Here is the spec that code supports is spelled out, but you just replace
> the comment with pointer to the spec that the code does not support.
>
Hmm? How so?
I have this EDD info:
# hexdump -C raw_data
00000000 1e 00 03 00 14 04 00 00 ff 00 00 00 3f 00 00 00
|............?...|
00000010 00 00 00 01 00 00 00 00 00 02 ff ff ff ff dd be
|................|
00000020 24 00 00 00 50 43 49 00 46 49 42 52 45 00 00 00
|$...PCI.FIBRE...|
00000030 07 00 00 00 00 00 00 00 50 01 43 80 01 3c 94 48
|........P.C..<.H|
00000040 01 c8 00 00 00 00 00 00 00 00 |..........|
which used to be perfectly valid, contains an 'interface_type'
string, and a device path. All perfectly okay.
And, as mentioned, used to be displayed ok prior to the mentioned
commit.
So why do you claim we can't display it anymore?
Cheers,
Hannes
--
Dr. Hannes Reinecke zSeries & Storage
hare@suse.de +49 911 74053 688
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: J. Hawn, J. Guild, F. Imendörffer, HRB 16746 (AG Nürnberg)
next prev parent reply other threads:[~2012-05-15 11:20 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-15 11:04 [PATCH] EDD: Check for correct EDD 3.0 length Hannes Reinecke
2012-05-15 11:12 ` Gleb Natapov
2012-05-15 11:20 ` Hannes Reinecke [this message]
2012-05-15 11:59 ` Gleb Natapov
2012-05-15 12:53 ` Gleb Natapov
2012-05-15 13:49 ` Alan Cox
2012-05-15 14:12 ` Gleb Natapov
2012-05-15 14:18 ` Alan Cox
2012-05-15 14:21 ` Gleb Natapov
2012-05-15 14:36 ` Alan Cox
2012-05-15 14:48 ` Gleb Natapov
2012-05-15 14:54 ` Alan Cox
2012-05-15 15:00 ` Gleb Natapov
2012-05-15 14:00 ` Alan Cox
2012-05-15 14:36 ` Gleb Natapov
2012-05-15 14:52 ` Alan Cox
2012-05-15 14:53 ` Gleb Natapov
2012-05-15 15:22 ` Alan Cox
2012-05-15 15:29 ` Gleb Natapov
2012-05-15 15:41 ` Alan Cox
2012-05-15 15:53 ` Gleb Natapov
2012-05-15 15:14 ` Alan Cox
2012-05-15 15:31 ` Alan Cox
2012-05-15 15:46 ` Gleb Natapov
2012-05-15 17:17 ` H. Peter Anvin
-- strict thread matches above, loose matches on Subject: below --
2012-05-16 6:51 Hannes Reinecke
2012-05-16 8:28 ` Gleb Natapov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FB23C09.7060300@suse.de \
--to=hare@suse.de \
--cc=gleb@redhat.com \
--cc=hpa@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox