[Patch] x86 : set numa_nodes_parsed at acpi_numa_memory_affinity_init

[Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>]

When hot-adding a CPU into my system, the system showed following message
since node_to_cpumask_map[2] was not allocated memory.

Booting Node 2 Processor 32 APIC 0xc0
node_to_cpumask_map[2] NULL
Pid: 0, comm: swapper/32 Tainted: G       A     3.3.5-acd #21
Call Trace:
 [<ffffffff81048845>] debug_cpumask_set_cpu+0x155/0x160
 [<ffffffff8105e28a>] ? add_timer_on+0xaa/0x120
 [<ffffffff8150665f>] numa_add_cpu+0x1e/0x22
 [<ffffffff815020bb>] identify_cpu+0x1df/0x1e4
 [<ffffffff815020d6>] identify_econdary_cpu+0x16/0x1d
 [<ffffffff81504614>] smp_store_cpu_info+0x3c/0x3e
 [<ffffffff81505263>] smp_callin+0x139/0x1be
 [<ffffffff815052fb>] start_secondary+0x13/0xeb

In my investigation, the root cause is that the bit of node 2 was not set at
numa_nodes_parsed since hot-added cpu was not written in ACPI SRAT Table.
But hot-added memory which is same PXM as the cpu is written in here.

ACPI Spec Rev 5.0 says about ACPI SRAT talbe as follows:
This optional table provides information that allows OSPM to associate
processors and memory ranges, including ranges of memory provided by
hot-added memory devices, with system localities / proximity domains
and clock domains.

So I think the ACPI SRAT Table is not wrong. Thus numa_nodes_parsed should be set
by not only acpi_numa_processor_affinity_init / acpi_numa_x2apic_affinity_init
but also acpi_numa_memory_affinity_init for the case.

Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
---
 arch/x86/mm/srat.c |    2 ++
 1 file changed, 2 insertions(+)

Index: linux-3.4/arch/x86/mm/srat.c
===================================================================
--- linux-3.4.orig/arch/x86/mm/srat.c	2012-05-21 07:29:13.000000000 +0900
+++ linux-3.4/arch/x86/mm/srat.c	2012-05-29 05:28:27.353916902 +0900
@@ -176,6 +176,8 @@  acpi_numa_memory_affinity_init(struct ac
 		return;
 	}

+	node_set(node, numa_nodes_parsed);
+
 	printk(KERN_INFO "SRAT: Node %u PXM %u %Lx-%Lx\n", node, pxm,
 	       start, end);
 }