From: Asai Thambi S P <asamymuthupa@micron.com>
To: Jens Axboe <axboe@kernel.dk>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
Sam Bradshaw <sbradshaw@micron.com>
Subject: [PATCH 10/11] mtip32xx: Changes to sysfs entries
Date: Tue, 29 May 2012 18:44:54 -0700 [thread overview]
Message-ID: <4FC57B96.30500@micron.com> (raw)
* Formatted the output of 'registers' entry
* Added "Commands in Q' to output of 'registers' entry
* Added a new entry 'flags'
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
---
| 12 ++++-
drivers/block/mtip32xx/mtip32xx.c | 76 +++++++++++++++++++++-------
2 files changed, 67 insertions(+), 21 deletions(-)
--git a/Documentation/ABI/testing/sysfs-block-rssd b/Documentation/ABI/testing/sysfs-block-rssd
index d535757..679ce35 100644
--- a/Documentation/ABI/testing/sysfs-block-rssd
+++ b/Documentation/ABI/testing/sysfs-block-rssd
@@ -6,13 +6,21 @@ Description: This is a read-only file. Dumps below driver information and
hardware registers.
- S ACTive
- Command Issue
- - Allocated
- Completed
- PORT IRQ STAT
- HOST IRQ STAT
+ - Allocated
+ - Commands in Q
What: /sys/block/rssd*/status
Date: April 2012
KernelVersion: 3.4
Contact: Asai Thambi S P <asamymuthupa@micron.com>
-Description: This is a read-only file. Indicates the status of the device.
+Description: This is a read-only file. Indicates the status of the device.
+
+What: /sys/block/rssd*/flags
+Date: May 2012
+KernelVersion: 3.5
+Contact: Asai Thambi S P <asamymuthupa@micron.com>
+Description: This is a read-only file. Dumps the flags in port and driver
+ data structure
diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c
index d0fa357..18daa04 100644
--- a/drivers/block/mtip32xx/mtip32xx.c
+++ b/drivers/block/mtip32xx/mtip32xx.c
@@ -2562,40 +2562,58 @@ static ssize_t mtip_hw_show_registers(struct device *dev,
int size = 0;
int n;
- size += sprintf(&buf[size], "S ACTive:\n");
+ size += sprintf(&buf[size], "Hardware\n--------\n");
+ size += sprintf(&buf[size], "S ACTive : [ 0x");
- for (n = 0; n < dd->slot_groups; n++)
- size += sprintf(&buf[size], "0x%08x\n",
+ for (n = dd->slot_groups-1; n >= 0; n--)
+ size += sprintf(&buf[size], "%08X ",
readl(dd->port->s_active[n]));
- size += sprintf(&buf[size], "Command Issue:\n");
+ size += sprintf(&buf[size], "]\n");
+ size += sprintf(&buf[size], "Command Issue : [ 0x");
- for (n = 0; n < dd->slot_groups; n++)
- size += sprintf(&buf[size], "0x%08x\n",
+ for (n = dd->slot_groups-1; n >= 0; n--)
+ size += sprintf(&buf[size], "%08X ",
readl(dd->port->cmd_issue[n]));
- size += sprintf(&buf[size], "Allocated:\n");
+ size += sprintf(&buf[size], "]\n");
+ size += sprintf(&buf[size], "Completed : [ 0x");
- for (n = 0; n < dd->slot_groups; n++) {
+ for (n = dd->slot_groups-1; n >= 0; n--)
+ size += sprintf(&buf[size], "%08X ",
+ readl(dd->port->completed[n]));
+
+ size += sprintf(&buf[size], "]\n");
+ size += sprintf(&buf[size], "PORT IRQ STAT : [ 0x%08X ]\n",
+ readl(dd->port->mmio + PORT_IRQ_STAT));
+ size += sprintf(&buf[size], "HOST IRQ STAT : [ 0x%08X ]\n",
+ readl(dd->mmio + HOST_IRQ_STAT));
+ size += sprintf(&buf[size], "\n");
+
+ size += sprintf(&buf[size], "Local\n-----\n");
+ size += sprintf(&buf[size], "Allocated : [ 0x");
+
+ for (n = dd->slot_groups-1; n >= 0; n--) {
if (sizeof(long) > sizeof(u32))
group_allocated =
dd->port->allocated[n/2] >> (32*(n&1));
else
group_allocated = dd->port->allocated[n];
- size += sprintf(&buf[size], "0x%08x\n",
- group_allocated);
+ size += sprintf(&buf[size], "%08X ", group_allocated);
}
+ size += sprintf(&buf[size], "]\n");
- size += sprintf(&buf[size], "Completed:\n");
+ size += sprintf(&buf[size], "Commands in Q: [ 0x");
- for (n = 0; n < dd->slot_groups; n++)
- size += sprintf(&buf[size], "0x%08x\n",
- readl(dd->port->completed[n]));
-
- size += sprintf(&buf[size], "PORT IRQ STAT : 0x%08x\n",
- readl(dd->port->mmio + PORT_IRQ_STAT));
- size += sprintf(&buf[size], "HOST IRQ STAT : 0x%08x\n",
- readl(dd->mmio + HOST_IRQ_STAT));
+ for (n = dd->slot_groups-1; n >= 0; n--) {
+ if (sizeof(long) > sizeof(u32))
+ group_allocated =
+ dd->port->cmds_to_issue[n/2] >> (32*(n&1));
+ else
+ group_allocated = dd->port->cmds_to_issue[n];
+ size += sprintf(&buf[size], "%08X ", group_allocated);
+ }
+ size += sprintf(&buf[size], "]\n");
return size;
}
@@ -2617,8 +2635,24 @@ static ssize_t mtip_hw_show_status(struct device *dev,
return size;
}
+static ssize_t mtip_hw_show_flags(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct driver_data *dd = dev_to_disk(dev)->private_data;
+ int size = 0;
+
+ size += sprintf(&buf[size], "Flag in port struct : [ %08lX ]\n",
+ dd->port->flags);
+ size += sprintf(&buf[size], "Flag in dd struct : [ %08lX ]\n",
+ dd->dd_flag);
+
+ return size;
+}
+
static DEVICE_ATTR(registers, S_IRUGO, mtip_hw_show_registers, NULL);
static DEVICE_ATTR(status, S_IRUGO, mtip_hw_show_status, NULL);
+static DEVICE_ATTR(flags, S_IRUGO, mtip_hw_show_flags, NULL);
/*
* Create the sysfs related attributes.
@@ -2641,6 +2675,9 @@ static int mtip_hw_sysfs_init(struct driver_data *dd, struct kobject *kobj)
if (sysfs_create_file(kobj, &dev_attr_status.attr))
dev_warn(&dd->pdev->dev,
"Error creating 'status' sysfs entry\n");
+ if (sysfs_create_file(kobj, &dev_attr_flags.attr))
+ dev_warn(&dd->pdev->dev,
+ "Error creating 'flags' sysfs entry\n");
return 0;
}
@@ -2661,6 +2698,7 @@ static int mtip_hw_sysfs_exit(struct driver_data *dd, struct kobject *kobj)
sysfs_remove_file(kobj, &dev_attr_registers.attr);
sysfs_remove_file(kobj, &dev_attr_status.attr);
+ sysfs_remove_file(kobj, &dev_attr_flags.attr);
return 0;
}
--
1.7.1
next reply other threads:[~2012-05-30 1:44 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-30 1:44 Asai Thambi S P [this message]
2012-05-31 6:08 ` [PATCH 10/11] mtip32xx: Changes to sysfs entries Greg KH
2012-05-31 8:24 ` Jens Axboe
2012-05-31 15:59 ` Asai Thambi S P
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FC57B96.30500@micron.com \
--to=asamymuthupa@micron.com \
--cc=axboe@kernel.dk \
--cc=linux-kernel@vger.kernel.org \
--cc=sbradshaw@micron.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox