public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Asai Thambi S P <asamymuthupa@micron.com>
To: Jens Axboe <axboe@kernel.dk>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	Greg KH <gregkh@linuxfoundation.org>,
	Sam Bradshaw <sbradshaw@micron.com>
Subject: [PATCH 1/2] mtip32xx: Remove 'registers' and 'flags' from sysfs
Date: Mon, 4 Jun 2012 12:43:03 -0700	[thread overview]
Message-ID: <4FCD0FC7.9010105@micron.com> (raw)


This patch removes entries 'registers' and 'flags' from sysfs. Updated ABI file
to reflect this change.

Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
---
 Documentation/ABI/testing/sysfs-block-rssd |   21 ------
 drivers/block/mtip32xx/mtip32xx.c          |   92 +---------------------------
 2 files changed, 1 insertions(+), 112 deletions(-)

diff --git a/Documentation/ABI/testing/sysfs-block-rssd b/Documentation/ABI/testing/sysfs-block-rssd
index 679ce35..beef30c 100644
--- a/Documentation/ABI/testing/sysfs-block-rssd
+++ b/Documentation/ABI/testing/sysfs-block-rssd
@@ -1,26 +1,5 @@
-What:           /sys/block/rssd*/registers
-Date:           March 2012
-KernelVersion:  3.3
-Contact:        Asai Thambi S P <asamymuthupa@micron.com>
-Description:    This is a read-only file. Dumps below driver information and
-                hardware registers.
-                    - S ACTive
-                    - Command Issue
-                    - Completed
-                    - PORT IRQ STAT
-                    - HOST IRQ STAT
-                    - Allocated
-                    - Commands in Q
-
 What:           /sys/block/rssd*/status
 Date:           April 2012
 KernelVersion:  3.4
 Contact:        Asai Thambi S P <asamymuthupa@micron.com>
 Description:    This is a read-only file. Indicates the status of the device.
-
-What:           /sys/block/rssd*/flags
-Date:           May 2012
-KernelVersion:  3.5
-Contact:        Asai Thambi S P <asamymuthupa@micron.com>
-Description:    This is a read-only file. Dumps the flags in port and driver
-                data structure
diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c
index 264bc77..b6e95b9 100644
--- a/drivers/block/mtip32xx/mtip32xx.c
+++ b/drivers/block/mtip32xx/mtip32xx.c
@@ -2546,7 +2546,7 @@ static struct scatterlist *mtip_hw_get_scatterlist(struct driver_data *dd,
 }
 
 /*
- * Sysfs register/status dump.
+ * Sysfs status dump.
  *
  * @dev  Pointer to the device structure, passed by the kernrel.
  * @attr Pointer to the device_attribute structure passed by the kernel.
@@ -2555,71 +2555,6 @@ static struct scatterlist *mtip_hw_get_scatterlist(struct driver_data *dd,
  * return value
  *	The size, in bytes, of the data copied into buf.
  */
-static ssize_t mtip_hw_show_registers(struct device *dev,
-				struct device_attribute *attr,
-				char *buf)
-{
-	u32 group_allocated;
-	struct driver_data *dd = dev_to_disk(dev)->private_data;
-	int size = 0;
-	int n;
-
-	size += sprintf(&buf[size], "Hardware\n--------\n");
-	size += sprintf(&buf[size], "S ACTive      : [ 0x");
-
-	for (n = dd->slot_groups-1; n >= 0; n--)
-		size += sprintf(&buf[size], "%08X ",
-					 readl(dd->port->s_active[n]));
-
-	size += sprintf(&buf[size], "]\n");
-	size += sprintf(&buf[size], "Command Issue : [ 0x");
-
-	for (n = dd->slot_groups-1; n >= 0; n--)
-		size += sprintf(&buf[size], "%08X ",
-					readl(dd->port->cmd_issue[n]));
-
-	size += sprintf(&buf[size], "]\n");
-	size += sprintf(&buf[size], "Completed     : [ 0x");
-
-	for (n = dd->slot_groups-1; n >= 0; n--)
-		size += sprintf(&buf[size], "%08X ",
-				readl(dd->port->completed[n]));
-
-	size += sprintf(&buf[size], "]\n");
-	size += sprintf(&buf[size], "PORT IRQ STAT : [ 0x%08X ]\n",
-				readl(dd->port->mmio + PORT_IRQ_STAT));
-	size += sprintf(&buf[size], "HOST IRQ STAT : [ 0x%08X ]\n",
-				readl(dd->mmio + HOST_IRQ_STAT));
-	size += sprintf(&buf[size], "\n");
-
-	size += sprintf(&buf[size], "Local\n-----\n");
-	size += sprintf(&buf[size], "Allocated    : [ 0x");
-
-	for (n = dd->slot_groups-1; n >= 0; n--) {
-		if (sizeof(long) > sizeof(u32))
-			group_allocated =
-				dd->port->allocated[n/2] >> (32*(n&1));
-		else
-			group_allocated = dd->port->allocated[n];
-		size += sprintf(&buf[size], "%08X ", group_allocated);
-	}
-	size += sprintf(&buf[size], "]\n");
-
-	size += sprintf(&buf[size], "Commands in Q: [ 0x");
-
-	for (n = dd->slot_groups-1; n >= 0; n--) {
-		if (sizeof(long) > sizeof(u32))
-			group_allocated =
-				dd->port->cmds_to_issue[n/2] >> (32*(n&1));
-		else
-			group_allocated = dd->port->cmds_to_issue[n];
-		size += sprintf(&buf[size], "%08X ", group_allocated);
-	}
-	size += sprintf(&buf[size], "]\n");
-
-	return size;
-}
-
 static ssize_t mtip_hw_show_status(struct device *dev,
 				struct device_attribute *attr,
 				char *buf)
@@ -2637,24 +2572,7 @@ static ssize_t mtip_hw_show_status(struct device *dev,
 	return size;
 }
 
-static ssize_t mtip_hw_show_flags(struct device *dev,
-				struct device_attribute *attr,
-				char *buf)
-{
-	struct driver_data *dd = dev_to_disk(dev)->private_data;
-	int size = 0;
-
-	size += sprintf(&buf[size], "Flag in port struct : [ %08lX ]\n",
-							dd->port->flags);
-	size += sprintf(&buf[size], "Flag in dd struct   : [ %08lX ]\n",
-							dd->dd_flag);
-
-	return size;
-}
-
-static DEVICE_ATTR(registers, S_IRUGO, mtip_hw_show_registers, NULL);
 static DEVICE_ATTR(status, S_IRUGO, mtip_hw_show_status, NULL);
-static DEVICE_ATTR(flags, S_IRUGO, mtip_hw_show_flags, NULL);
 
 /*
  * Create the sysfs related attributes.
@@ -2671,15 +2589,9 @@ static int mtip_hw_sysfs_init(struct driver_data *dd, struct kobject *kobj)
 	if (!kobj || !dd)
 		return -EINVAL;
 
-	if (sysfs_create_file(kobj, &dev_attr_registers.attr))
-		dev_warn(&dd->pdev->dev,
-			"Error creating 'registers' sysfs entry\n");
 	if (sysfs_create_file(kobj, &dev_attr_status.attr))
 		dev_warn(&dd->pdev->dev,
 			"Error creating 'status' sysfs entry\n");
-	if (sysfs_create_file(kobj, &dev_attr_flags.attr))
-		dev_warn(&dd->pdev->dev,
-			"Error creating 'flags' sysfs entry\n");
 	return 0;
 }
 
@@ -2698,9 +2610,7 @@ static int mtip_hw_sysfs_exit(struct driver_data *dd, struct kobject *kobj)
 	if (!kobj || !dd)
 		return -EINVAL;
 
-	sysfs_remove_file(kobj, &dev_attr_registers.attr);
 	sysfs_remove_file(kobj, &dev_attr_status.attr);
-	sysfs_remove_file(kobj, &dev_attr_flags.attr);
 
 	return 0;
 }
-- 
1.7.1


             reply	other threads:[~2012-06-04 19:43 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-06-04 19:43 Asai Thambi S P [this message]
2012-06-05  7:16 ` [PATCH 1/2] mtip32xx: Remove 'registers' and 'flags' from sysfs Jens Axboe
2012-06-05  9:33 ` Greg KH
2012-06-05 18:18   ` Asai Thambi S P
2012-06-05 20:25     ` Greg KH
2012-06-06 18:04       ` Asai Thambi S P
2012-06-06 21:25         ` Greg KH
2012-06-07 23:26           ` Asai Thambi S P

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4FCD0FC7.9010105@micron.com \
    --to=asamymuthupa@micron.com \
    --cc=axboe@kernel.dk \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=sbradshaw@micron.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox