From: Graeme Gregory <gg@slimlogic.co.uk>
To: Axel Lin <axel.lin@gmail.com>
Cc: linux-kernel@vger.kernel.org,
Mark Brown <broonie@opensource.wolfsonmicro.com>,
Liam Girdwood <lrg@ti.com>
Subject: Re: [PATCH v2] regulator: palmas: Slightly code change for better readability
Date: Wed, 06 Jun 2012 15:43:48 +0100 [thread overview]
Message-ID: <4FCF6CA4.90400@slimlogic.co.uk> (raw)
In-Reply-To: <1338984098.5195.1.camel@phoenix>
Acked-by: Graeme Gregory <gg@slimlogic.co.uk>
On 06/06/12 13:01, Axel Lin wrote:
> It's a little bit hard to read that the "else" case means id == PALMAS_REG_SMPS10.
>
> if (id != PALMAS_REG_SMPS10){
> do something for the cases id != PALMAS_REG_SMPS10;
> } else {
> do something for the case id == PALMAS_REG_SMPS10;
> }
>
> This patch changes above syntax to switch statement.
>
> Signed-off-by: Axel Lin <axel.lin@gmail.com>
> ---
> drivers/regulator/palmas-regulator.c | 28 ++++++++++++++++------------
> 1 file changed, 16 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c
> index b4e10b0..112436b 100644
> --- a/drivers/regulator/palmas-regulator.c
> +++ b/drivers/regulator/palmas-regulator.c
> @@ -517,7 +517,15 @@ static int palmas_smps_init(struct palmas *palmas, int id,
> if (ret)
> return ret;
>
> - if (id != PALMAS_REG_SMPS10) {
> + switch (id) {
> + case PALMAS_REG_SMPS10:
> + if (reg_init->mode_sleep) {
> + reg &= ~PALMAS_SMPS10_CTRL_MODE_SLEEP_MASK;
> + reg |= reg_init->mode_sleep <<
> + PALMAS_SMPS10_CTRL_MODE_SLEEP_SHIFT;
> + }
> + break;
> + default:
> if (reg_init->warm_reset)
> reg |= PALMAS_SMPS12_CTRL_WR_S;
>
> @@ -529,14 +537,8 @@ static int palmas_smps_init(struct palmas *palmas, int id,
> reg |= reg_init->mode_sleep <<
> PALMAS_SMPS12_CTRL_MODE_SLEEP_SHIFT;
> }
> - } else {
> - if (reg_init->mode_sleep) {
> - reg &= ~PALMAS_SMPS10_CTRL_MODE_SLEEP_MASK;
> - reg |= reg_init->mode_sleep <<
> - PALMAS_SMPS10_CTRL_MODE_SLEEP_SHIFT;
> - }
> -
> }
> +
> ret = palmas_smps_write(palmas, addr, reg);
> if (ret)
> return ret;
> @@ -660,10 +662,8 @@ static __devinit int palmas_probe(struct platform_device *pdev)
> pmic->desc[id].name = palmas_regs_info[id].name;
> pmic->desc[id].id = id;
>
> - if (id != PALMAS_REG_SMPS10) {
> - pmic->desc[id].ops = &palmas_ops_smps;
> - pmic->desc[id].n_voltages = PALMAS_SMPS_NUM_VOLTAGES;
> - } else {
> + switch (id) {
> + case PALMAS_REG_SMPS10:
> pmic->desc[id].n_voltages = PALMAS_SMPS10_NUM_VOLTAGES;
> pmic->desc[id].ops = &palmas_ops_smps10;
> pmic->desc[id].vsel_reg = PALMAS_SMPS10_CTRL;
> @@ -672,6 +672,10 @@ static __devinit int palmas_probe(struct platform_device *pdev)
> pmic->desc[id].enable_mask = SMPS10_BOOST_EN;
> pmic->desc[id].min_uV = 3750000;
> pmic->desc[id].uV_step = 1250000;
> + break;
> + default:
> + pmic->desc[id].ops = &palmas_ops_smps;
> + pmic->desc[id].n_voltages = PALMAS_SMPS_NUM_VOLTAGES;
> }
>
> pmic->desc[id].type = REGULATOR_VOLTAGE;
next prev parent reply other threads:[~2012-06-06 14:43 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-06 12:01 [PATCH v2] regulator: palmas: Slightly code change for better readability Axel Lin
2012-06-06 14:43 ` Graeme Gregory [this message]
2012-06-07 23:37 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FCF6CA4.90400@slimlogic.co.uk \
--to=gg@slimlogic.co.uk \
--cc=axel.lin@gmail.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lrg@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox