[PATCH] regulator: tps62360: Simplify tps62360_set_voltage_time_sel implementation

[PATCH] regulator: tps62360: Simplify tps62360_set_voltage_time_sel implementation

[Axel Lin]

For linear mappings, we can use below equation to get the voltage difference
between new_selector and old_selector:

abs(new_selector - old_selector) * rdev->desc->uV_step

Signed-off-by: Axel Lin <axel.lin@gmail.com>
---
 drivers/regulator/tps62360-regulator.c |   13 +++----------
 1 file changed, 3 insertions(+), 10 deletions(-)

diff --git a/drivers/regulator/tps62360-regulator.c b/drivers/regulator/tps62360-regulator.c
index e534269..d044a58 100644
--- a/drivers/regulator/tps62360-regulator.c
+++ b/drivers/regulator/tps62360-regulator.c
@@ -179,17 +179,10 @@ static int tps62360_set_voltage_time_sel(struct regulator_dev *rdev,
 		unsigned int old_selector, unsigned int new_selector)
 {
 	struct tps62360_chip *tps = rdev_get_drvdata(rdev);
-	int old_uV, new_uV;
 
-	old_uV = regulator_list_voltage_linear(rdev, old_selector);
-	if (old_uV < 0)
-		return old_uV;
-
-	new_uV = regulator_list_voltage_linear(rdev, new_selector);
-	if (new_uV < 0)
-		return new_uV;
-
-	return DIV_ROUND_UP(abs(old_uV - new_uV), tps->change_uv_per_us);
+	return DIV_ROUND_UP(abs(new_selector - old_selector) *
+			    rdev->desc->uV_step,
+			    tps->change_uv_per_us);
 }
 
 static int tps62360_set_mode(struct regulator_dev *rdev, unsigned int mode)
-- 
1.7.9.5

Re: [PATCH] regulator: tps62360: Simplify tps62360_set_voltage_time_sel implementation

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 325 bytes --]

On Fri, Jun 08, 2012 at 02:35:32PM +0800, Axel Lin wrote:
> For linear mappings, we can use below equation to get the voltage difference
> between new_selector and old_selector:

Applied, thanks.  There's a new framework feature that Yadwinder Singh
has contributed which should allow this to be moved to the regulator
desc.

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: [PATCH] regulator: tps62360: Simplify tps62360_set_voltage_time_sel implementation

[Laxman Dewangan]

On Monday 18 June 2012 10:49 AM, Axel Lin wrote:
> 2012/6/18 Mark Brown<broonie@opensource.wolfsonmicro.com>:
>> On Fri, Jun 08, 2012 at 02:35:32PM +0800, Axel Lin wrote:
>>
> This make me think if we should change the unit of ramp_delay
> to uV/uS rather than mV/uS. So we can avoid truncate issue.
>
Yes, we should have the ramp delay in uV/uS. many times, the ramp delay 
come as 0.025mV/uS  which will not be possible if we do mv/us.

Re: [PATCH] regulator: tps62360: Simplify tps62360_set_voltage_time_sel implementation

[Axel Lin]

2012/6/18 Mark Brown <broonie@opensource.wolfsonmicro.com>:
> On Fri, Jun 08, 2012 at 02:35:32PM +0800, Axel Lin wrote:
>> For linear mappings, we can use below equation to get the voltage difference
>> between new_selector and old_selector:
>
> Applied, thanks.  There's a new framework feature that Yadwinder Singh
> has contributed which should allow this to be moved to the regulator
> desc.

In this case, tps->change_uv_per_us is is calculated by :
tps->change_uv_per_us = DIV_ROUND_UP(32000, BIT(ramp_ctrl));

Which means tps->change_uv_per_us may be not alignment to mV.

This make me think if we should change the unit of ramp_delay
to uV/uS rather than mV/uS. So we can avoid truncate issue.

Regards,
Axel