From: "Ying-Chun Liu (PaulLiu)" <paulliu@debian.org>
To: Shawn Guo <shawn.guo@linaro.org>
Cc: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
"Ying-Chun Liu (PaulLiu)" <paul.liu@linaro.org>,
linux-arm-kernel@lists.infradead.org,
linaro-dev@lists.linaro.org,
"Samuel Ortiz" <sameo@linux.intel.com>,
patches@linaro.org,
"Mark Brown" <broonie@opensource.wolfsonmicro.com>,
"Robin Gong" <B38343@freescale.com>,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/2] mfd: Add Freescale's PMIC MC34708 support
Date: Thu, 05 Jul 2012 14:46:24 +0800 [thread overview]
Message-ID: <4FF53840.3070802@debian.org> (raw)
In-Reply-To: <CAAQ0ZWST5DgS+2Er5EsNscxXtThO7H9-HAO=TtM6Me7EHygK7w@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 4679 bytes --]
(2012年07月04日 21:44), Shawn Guo wrote:
> On 4 July 2012 15:37, Uwe Kleine-König <u.kleine-koenig@pengutronix.de> wrote:
>> I want to push that forward. What is the state of these patches on your
>> end? Did you start to address the comments? Are there more recent
>> patches than the ones in this thread?
>>
>> Whatever you might have it would be great if you could share it to help
>> preventing duplicate efforts.
>>
> As far as I know, Paul hasn't been on that effort any more.
>
> Copied his another email address.
>
> Regards,
> Shawn
Hi,
Sorry, forget to mention about this.
We have a patch for the DTS corresponding to this patch.
From f3d28445de908bf2a848f6e8104b5c7f347ecd64 Mon Sep 17 00:00:00 2001
From: "Ying-Chun Liu (PaulLiu)" <paul.liu@linaro.org>
Date: Thu, 19 Apr 2012 15:24:10 +0800
Subject: [PATCH] arm: imx53-qsb: Add Ripley driver DT nodes
This patch adds the ripley driver and regulators.
Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
---
arch/arm/boot/dts/imx53-qsb.dts | 104
+++++++++++++++++++++++++++++++++++++++
1 file changed, 104 insertions(+)
diff --git a/arch/arm/boot/dts/imx53-qsb.dts
b/arch/arm/boot/dts/imx53-qsb.dts
index 5c57c86..c95bad7 100644
--- a/arch/arm/boot/dts/imx53-qsb.dts
+++ b/arch/arm/boot/dts/imx53-qsb.dts
@@ -80,6 +80,110 @@
compatible = "dialog,da9053", "dialog,da9052";
reg = <0x48>;
};
+
+ ripley@8 {
+ compatible = "fsl,mc34708";
+ reg = <0x08>;
+ regulators {
+ mc34708__sw1a {
+ regulator-name = "SW1";
+ regulator-min-microvolt = <650000>;
+ regulator-max-microvolt = <1437500>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ mc34708__sw1b {
+ regulator-name = "SW1B";
+ regulator-min-microvolt = <650000>;
+ regulator-max-microvolt = <1437500>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ mc34708__sw2 {
+ regulator-name = "SW2";
+ regulator-min-microvolt = <650000>;
+ regulator-max-microvolt = <1437500>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ mc34708__sw3 {
+ regulator-name = "SW3";
+ regulator-min-microvolt = <650000>;
+ regulator-max-microvolt = <1425000>;
+ regulator-boot-on;
+ };
+ mc34708__sw4a {
+ regulator-name = "SW4A";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ mc34708__sw4b {
+ regulator-name = "SW4B";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ mc34708__sw5 {
+ regulator-name = "SW5";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ mc34708__swbst {
+ regulator-name = "SWBST";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ mc34708__vpll {
+ regulator-name = "VPLL";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ };
+ mc34708__vrefddr {
+ regulator-name = "VREFDDR";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ mc34708__vusb {
+ regulator-name = "VUSB";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ mc34708__vusb2 {
+ regulator-name = "VUSB2";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ mc34708__vdac {
+ regulator-name = "VDAC";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2775000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ mc34708__vgen1 {
+ regulator-name = "VGEN1";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1550000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ mc34708__vgen2 {
+ regulator-name = "VGEN2";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
};
fec@63fec000 {
--
1.7.10
Thanks,
Paul
--
PaulLiu (劉穎駿)
E-mail: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 900 bytes --]
prev parent reply other threads:[~2012-07-05 6:47 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-19 16:38 [PATCH 1/2] mfd: Add Freescale's PMIC MC34708 support Ying-Chun Liu (PaulLiu)
2012-04-19 16:38 ` [PATCH 2/2] regulator: Add Freescale's MC34708 regulators Ying-Chun Liu (PaulLiu)
2012-04-20 11:42 ` Mark Brown
2012-04-20 6:35 ` [PATCH 1/2] mfd: Add Freescale's PMIC MC34708 support Lothar Waßmann
2012-04-20 7:40 ` Robert Schwebel
2012-04-20 9:20 ` Mark Brown
2012-04-22 23:32 ` Marc Reilly
2012-07-04 7:37 ` Uwe Kleine-König
2012-07-04 13:44 ` Shawn Guo
2012-07-05 5:48 ` Ying-Chun Liu (PaulLiu)
2012-07-05 6:46 ` Ying-Chun Liu (PaulLiu) [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FF53840.3070802@debian.org \
--to=paulliu@debian.org \
--cc=B38343@freescale.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=linaro-dev@lists.linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@linaro.org \
--cc=paul.liu@linaro.org \
--cc=sameo@linux.intel.com \
--cc=shawn.guo@linaro.org \
--cc=u.kleine-koenig@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox