From: Qiao Zhou <zhouqiao@marvell.com>
To: Axel Lin <axel.lin@gmail.com>
Cc: SamuelOrtiz <sameo@linux.intel.com>,
Arnd Bergmann <arnd@arndb.de>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] mfd: Fix checking return value of regmap_read()
Date: Wed, 11 Jul 2012 09:50:46 +0800 [thread overview]
Message-ID: <4FFCDBF6.4030005@marvell.com> (raw)
In-Reply-To: <1341970074.11561.1.camel@phoenix>
On 07/11/2012 09:27 AM, Axel Lin wrote:
> Check the return value of regmap_read() rather than the read value.
>
> Signed-off-by: Axel Lin <axel.lin@gmail.com>
> ---
> drivers/mfd/88pm800.c | 16 +++++++++-------
> drivers/mfd/88pm805.c | 5 +++--
> 2 files changed, 12 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/mfd/88pm800.c b/drivers/mfd/88pm800.c
> index ec7d9b8..b67a301 100644
> --- a/drivers/mfd/88pm800.c
> +++ b/drivers/mfd/88pm800.c
> @@ -419,22 +419,24 @@ static int __devinit device_800_init(struct pm80x_chip *chip,
> struct pm80x_platform_data *pdata)
> {
> int ret, pmic_id;
> + unsigned int val;
>
> - regmap_read(chip->regmap, PM800_CHIP_ID, &ret);
> + ret = regmap_read(chip->regmap, PM800_CHIP_ID, &val);
> if (ret < 0) {
> dev_err(chip->dev, "Failed to read CHIP ID: %d\n", ret);
> goto out;
> }
>
> - pmic_id = ret & PM80X_VERSION_MASK;
> + pmic_id = val & PM80X_VERSION_MASK;
>
> if ((pmic_id >= PM800_CHIP_A0) && (pmic_id <= PM800_CHIP_END)) {
> - chip->version = ret;
> + chip->version = val;
> dev_info(chip->dev,
> - "88PM80x:Marvell 88PM800 (ID:0x%x) detected\n", ret);
> + "88PM80x:Marvell 88PM800 (ID:0x%x) detected\n", val);
> } else {
> dev_err(chip->dev,
> - "Failed to detect Marvell 88PM800:ChipID[0x%x]\n", ret);
> + "Failed to detect Marvell 88PM800:ChipID[0x%x]\n", val);
> + ret = -EINVAL;
> goto out;
> }
>
> @@ -442,12 +444,12 @@ static int __devinit device_800_init(struct pm80x_chip *chip,
> * alarm wake up bit will be clear in device_irq_init(),
> * read before that
> */
> - regmap_read(chip->regmap, PM800_RTC_CONTROL, &ret);
> + ret = regmap_read(chip->regmap, PM800_RTC_CONTROL, &val);
> if (ret < 0) {
> dev_err(chip->dev, "Failed to read RTC register: %d\n", ret);
> goto out;
> }
> - if (ret & PM800_ALARM_WAKEUP) {
> + if (val & PM800_ALARM_WAKEUP) {
> if (pdata && pdata->rtc)
> pdata->rtc->rtc_wakeup = 1;
> }
> diff --git a/drivers/mfd/88pm805.c b/drivers/mfd/88pm805.c
> index d59ca6b..6146583 100644
> --- a/drivers/mfd/88pm805.c
> +++ b/drivers/mfd/88pm805.c
> @@ -192,6 +192,7 @@ static struct regmap_irq_chip pm805_irq_chip = {
> static int __devinit device_805_init(struct pm80x_chip *chip)
> {
> int ret = 0;
> + unsigned int val;
> struct regmap *map = chip->regmap;
>
> if (!map) {
> @@ -199,12 +200,12 @@ static int __devinit device_805_init(struct pm80x_chip *chip)
> return -EINVAL;
> }
>
> - regmap_read(map, PM805_CHIP_ID, &ret);
> + ret = regmap_read(map, PM805_CHIP_ID, &val);
> if (ret < 0) {
> dev_err(chip->dev, "Failed to read CHIP ID: %d\n", ret);
> goto out_irq_init;
> }
> - chip->version = ret;
> + chip->version = val;
>
> chip->regmap_irq_chip = &pm805_irq_chip;
>
>
Axel,
thanks for the fixing.
--
Best Regards
Qiao
next prev parent reply other threads:[~2012-07-11 1:51 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-11 1:27 [PATCH] mfd: Fix checking return value of regmap_read() Axel Lin
2012-07-11 1:50 ` Qiao Zhou [this message]
2012-07-16 13:28 ` Samuel Ortiz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FFCDBF6.4030005@marvell.com \
--to=zhouqiao@marvell.com \
--cc=arnd@arndb.de \
--cc=axel.lin@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox