From: Joe Jin <joe.jin@oracle.com>
To: "Dave, Tushar N" <tushar.n.dave@intel.com>
Cc: "e1000-devel@lists.sf.net" <e1000-devel@lists.sf.net>,
"netdev@vger.kernel.org" <netdev@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: 82571EB: Detected Hardware Unit Hang
Date: Wed, 11 Jul 2012 15:17:42 +0800 [thread overview]
Message-ID: <4FFD2896.3090209@oracle.com> (raw)
In-Reply-To: <061C8A8601E8EE4CA8D8FD6990CEA891274EEF38@ORSMSX102.amr.corp.intel.com>
On 07/11/12 15:11, Dave, Tushar N wrote:
>> -----Original Message-----
>> From: Joe Jin [mailto:joe.jin@oracle.com]
>> Sent: Tuesday, July 10, 2012 10:03 PM
>> To: Dave, Tushar N
>> Cc: e1000-devel@lists.sf.net; netdev@vger.kernel.org; linux-
>> kernel@vger.kernel.org
>> Subject: Re: 82571EB: Detected Hardware Unit Hang
>>
>> On 07/11/12 12:05, Dave, Tushar N wrote:
>>> When you said you had this issue with RHEL5 and RHEL6 drivers, have you
>> install RHEl5/6 kernel and reproduced it? If so I think I should install
>> RHEL6 and try reproduce it locally!
>>>
>> Yes I reproduced this on both RHEL5 and RHEL6.
>>
>> So far I tried to scp big file (~1GB) will hit it at once.
>>
>> Thanks,
>> Joe
>
> Joe,
> Can you please send lspci -vvv output for failing port before issue occurs.
> Thanks.
>
# lspci -s 05:00.0 -vvv
05:00.0 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (Copper) (rev 06)
Subsystem: Oracle Corporation x4 PCI-Express Quad Gigabit Ethernet UTP Low Profile Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin B routed to IRQ 80
Region 0: Memory at fbde0000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at fbdc0000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at dc00 [size=32]
Expansion ROM at fbda0000 [disabled] [size=128K]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee21000 Data: 40cb
Capabilities: [e0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 <4us, L1 <64us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO+ CmpltAbrt- UnxCmplt- RxOF- MalfTLP+ ECRC- UnsupReq+ ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 12, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [140 v1] Device Serial Number 00-15-17-ff-ff-b9-77-9c
Kernel driver in use: e1000e
Kernel modules: e1000e
Thanks,
Joe
next prev parent reply other threads:[~2012-07-11 7:18 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-09 8:51 82571EB: Detected Hardware Unit Hang Joe Jin
2012-07-09 9:21 ` Eric Dumazet
2012-07-09 12:19 ` Joe Jin
2012-07-10 7:40 ` Joe Jin
2012-07-10 18:14 ` Wyborny, Carolyn
2012-07-10 19:02 ` Dave, Tushar N
2012-07-10 19:17 ` Dave, Tushar N
2012-07-11 0:34 ` Joe Jin
2012-07-11 1:18 ` Dave, Tushar N
2012-07-11 1:44 ` Joe Jin
2012-07-11 3:22 ` Dave, Tushar N
2012-07-11 3:29 ` Joe Jin
2012-07-11 4:05 ` Dave, Tushar N
2012-07-11 5:03 ` Joe Jin
2012-07-11 7:11 ` Dave, Tushar N
2012-07-11 7:17 ` Joe Jin [this message]
2012-07-11 7:37 ` Dave, Tushar N
2012-07-11 7:38 ` Joe Jin
2012-07-11 7:50 ` Dave, Tushar N
2012-07-11 7:53 ` Joe Jin
2012-07-11 18:51 ` Dave, Tushar N
2012-07-12 2:23 ` Joe Jin
2012-07-12 2:52 ` Dave, Tushar N
2012-07-12 2:57 ` Joe Jin
2012-07-12 3:07 ` Dave, Tushar N
2012-07-12 3:12 ` Joe Jin
2012-07-12 5:57 ` Dave, Tushar N
2012-07-12 6:16 ` Joe Jin
2012-07-12 6:41 ` Dave, Tushar N
2012-07-12 7:10 ` Joe Jin
2012-07-12 18:19 ` Dave, Tushar N
2012-07-12 23:46 ` Joe Jin
2012-07-13 4:10 ` Dave, Tushar N
2012-07-13 4:33 ` Joe Jin
2012-07-15 3:42 ` Dave, Tushar N
2012-07-15 3:52 ` Joe Jin
2012-07-15 13:35 ` Henrique de Moraes Holschuh
2012-07-16 15:47 ` Ben Hutchings
2012-07-16 16:08 ` Henrique de Moraes Holschuh
2012-07-17 4:48 ` Jon Mason
2012-07-17 4:45 ` Jon Mason
-- strict thread matches above, loose matches on Subject: below --
2012-11-08 6:24 Joe Jin
2012-11-08 20:35 ` Dave, Tushar N
2012-11-09 1:22 ` Joe Jin
2012-11-14 2:47 ` Joe Jin
2012-11-14 3:45 ` Dave, Tushar N
2012-11-15 0:32 ` Joe Jin
2012-11-15 20:26 ` Dave, Tushar N
2012-11-19 5:38 ` Joe Jin
2012-11-20 8:59 ` Dave, Tushar N
2012-11-20 13:24 ` Joe Jin
2012-11-20 13:24 ` Joe Jin
2012-11-14 3:37 ` Li Yu
2012-11-14 3:43 ` Dave, Tushar N
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FFD2896.3090209@oracle.com \
--to=joe.jin@oracle.com \
--cc=e1000-devel@lists.sf.net \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=tushar.n.dave@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).