From: Zhu Yanjun <yanjun.zhu@linux.dev>
To: "Gustavo A. R. Silva" <gustavo@embeddedor.com>,
zyjzyj2000@gmail.com, jgg@ziepe.ca, leon@kernel.org,
linux-rdma@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Subject: Re: [PATCH v3 1/1] RDMA/rxe: Avoid -Wflex-array-member-not-at-end warnings
Date: Mon, 22 Dec 2025 21:10:11 -0800 [thread overview]
Message-ID: <4a8e3365-cb74-4531-99dc-9d2911045d4b@linux.dev> (raw)
In-Reply-To: <ea716013-0149-40fa-b781-b0968980b7bd@embeddedor.com>
在 2025/12/22 21:03, Gustavo A. R. Silva 写道:
>
>
> On 12/23/25 13:41, Zhu Yanjun wrote:
>> From: "Gustavo A. R. Silva" <gustavoars@kernel.org>
>>
>> -Wflex-array-member-not-at-end was introduced in GCC-14, and we are
>> getting ready to enable it, globally.
>>
>> Use the new TRAILING_OVERLAP() helper to fix the following warning:
>>
>> 21 drivers/infiniband/sw/rxe/rxe_verbs.h:271:33: warning: structure
>> containing a flexible array member is not at the end of another
>> structure [-Wflex-array-member-not-at-end]
>>
>> This helper creates a union between a flexible-array member (FAM) and a
>> set of MEMBERS that would otherwise follow it.
>>
>> This overlays the trailing MEMBER struct ib_sge sge[RXE_MAX_SGE]; onto
>> the FAM struct rxe_recv_wqe::dma.sge, while keeping the FAM and the
>> start of MEMBER aligned.
>>
>> The static_assert() ensures this alignment remains, and it's
>> intentionally placed inmediately after the related structure --no
>> blank line in between.
>>
>> Lastly, move the conflicting declaration struct rxe_resp_info resp;
>> to the end of the corresponding structure.
>>
>> Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
>> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
>> ---
>> V2->V3: Replace struct ib_sge with struct rxe_sge
>
> What are you doing?
Because struct rxe_sge differs from struct ib_sge, I aligned it to use
the same structure.
Yanjun.Zhu
>
> You're making a mess of this whole thing. Please, don't make changes
> to my patches on your own.
>
> -Gustavo
>
>> ---
>> drivers/infiniband/sw/rxe/rxe_verbs.h | 18 +++++++++++-------
>> 1 file changed, 11 insertions(+), 7 deletions(-)
>>
>> diff --git a/drivers/infiniband/sw/rxe/rxe_verbs.h
>> b/drivers/infiniband/sw/rxe/rxe_verbs.h
>> index fd48075810dd..3ffd7be8e7b1 100644
>> --- a/drivers/infiniband/sw/rxe/rxe_verbs.h
>> +++ b/drivers/infiniband/sw/rxe/rxe_verbs.h
>> @@ -219,12 +219,6 @@ struct rxe_resp_info {
>> u32 rkey;
>> u32 length;
>> - /* SRQ only */
>> - struct {
>> - struct rxe_recv_wqe wqe;
>> - struct ib_sge sge[RXE_MAX_SGE];
>> - } srq_wqe;
>> -
>> /* Responder resources. It's a circular list where the oldest
>> * resource is dropped first.
>> */
>> @@ -232,7 +226,15 @@ struct rxe_resp_info {
>> unsigned int res_head;
>> unsigned int res_tail;
>> struct resp_res *res;
>> +
>> + /* SRQ only */
>> + /* Must be last as it ends in a flexible-array member. */
>> + TRAILING_OVERLAP(struct rxe_recv_wqe, wqe, dma.sge,
>> + struct rxe_sge sge[RXE_MAX_SGE];
>> + ) srq_wqe;
>> };
>> +static_assert(offsetof(struct rxe_resp_info, srq_wqe.wqe.dma.sge) ==
>> + offsetof(struct rxe_resp_info, srq_wqe.sge));
>> struct rxe_qp {
>> struct ib_qp ibqp;
>> @@ -269,7 +271,6 @@ struct rxe_qp {
>> struct rxe_req_info req;
>> struct rxe_comp_info comp;
>> - struct rxe_resp_info resp;
>> atomic_t ssn;
>> atomic_t skb_out;
>> @@ -289,6 +290,9 @@ struct rxe_qp {
>> spinlock_t state_lock; /* guard requester and completer */
>> struct execute_work cleanup_work;
>> +
>> + /* Must be last as it ends in a flexible-array member. */
>> + struct rxe_resp_info resp;
>> };
>> enum {
>
--
Best Regards,
Yanjun.Zhu
next prev parent reply other threads:[~2025-12-23 5:10 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-12-23 4:41 [PATCH v3 1/1] RDMA/rxe: Avoid -Wflex-array-member-not-at-end warnings Zhu Yanjun
2025-12-23 5:03 ` Gustavo A. R. Silva
2025-12-23 5:10 ` Zhu Yanjun [this message]
2025-12-23 5:18 ` Gustavo A. R. Silva
2025-12-23 5:26 ` Zhu Yanjun
2025-12-23 5:34 ` Gustavo A. R. Silva
2025-12-23 5:44 ` Zhu Yanjun
2025-12-23 5:54 ` Gustavo A. R. Silva
2025-12-23 6:46 ` Zhu Yanjun
2025-12-23 9:28 ` Gustavo A. R. Silva
2025-12-23 16:02 ` Zhu Yanjun
2025-12-23 14:20 ` Leon Romanovsky
2025-12-23 16:13 ` Zhu Yanjun
2025-12-23 9:34 ` Gustavo A. R. Silva
2025-12-23 16:38 ` Greg Sword
2025-12-23 16:59 ` Gustavo A. R. Silva
2025-12-23 17:19 ` Greg Sword
2025-12-23 17:26 ` Gustavo A. R. Silva
2025-12-24 6:51 ` Leon Romanovsky
2025-12-24 8:32 ` Gustavo A. R. Silva
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4a8e3365-cb74-4531-99dc-9d2911045d4b@linux.dev \
--to=yanjun.zhu@linux.dev \
--cc=gustavo@embeddedor.com \
--cc=gustavoars@kernel.org \
--cc=jgg@ziepe.ca \
--cc=leon@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rdma@vger.kernel.org \
--cc=zyjzyj2000@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox